Biomedical subjects

Matthew O'Donnell

Publications and source records attributed to Matthew O'Donnell.

31 records · Page 2Linked to original sources

PubMed2004

Finite-element analysis of material and parameter effects in laser-based thermoelastic ultrasound generation.

Laser-based, thermoelastic transduction methods have potential in very high frequency (>50 MHz), high-density two-dimensional (2-D) arrays for a variety of very high-resolution superficial imaging applications, including in vivo tissue sectioning. Previous studies of these transducers generally have been based on experimental measurements or theoretical analyses using various simplifying assumptions. These theoretical models are mostly 1-D and best matched to simple geometries with a minimum number of component materials. In this work, we use a new thermoelastic solver in a commercially available finite-element analysis (FEA) software package to analyze multidimensional effects in laser-based devices of arbitrary geometry with the potential for use with arbitrary material properties. The FEA approach was verified first against experimental data. Thereafter, we explored the impact of various design variables, including laser spot size and laser penetration depth.

Anatomy, Cross-Sectional↗

PubMed2004

Feasibility of applying ultrasound strain imaging to detect renal transplant chronic allograft nephropathy.

Chronic renal transplantation fibrosis, often termed Chronic Allograft Nephropathy, may progress undetected. Since renal fibrosis may be accompanied by a change in measurable elastic tissue properties, ultrasound strain management may be useful in it detection. Ultrasound strain imaging was performed for two subjects with renal transplants; one with normal renal function and one with mild renal insufficiency and biopsy demonstrated fibrosis. Subjects underwent ultrasound examination with application of a controlled deformation using phase-sensitive, two-dimensional speckle tracking to evaluate internal tissue motion to measure tissue displacement and strain. Measurements over multiple beams for an equivalent deformational stress showed there was a threefold difference in renal cortical strain between the two subjects. These data suggest that ultrasound elasticity imaging may prove useful in measuring mechanical changes related to fibrosis with the transplant kidney.

Adult↗

PubMed2004

Prospects for elasticity reconstruction in the heart.

The elastic moduli in anisotropic media can be estimated using either direct mechanical or sound speed measurements. Here we compare moduli in the passive heart estimated with different methods and demonstrate that high-frequency (i.e., ultrasonic) sound speed measurements are inconsistent with static deformations and low-frequency shear wave results. Both tissue fixation and the high-operating frequency of ultrasonic measurements contribute to these discrepancies. Moreover, the precision of ultrasonic sound speed measurements required to estimate elastic moduli describing static deformations of a nearly incompressible anisotropic medium such as the heart appears to be beyond the scope of current methods. We conclude that an incompressible anisotropic elastic model is appropriate for elasticity reconstruction in the heart, in which three independent constants characterize small strain behavior, but four are needed for a fully nonlinear description of finite deformations.

Algorithms↗

PubMed2004

Model-based reconstructive elasticity imaging of deep venous thrombosis.

Deep venous thrombosis (DVT) and its sequela, pulmonary embolism, is a significant clinical problem. Once detected, DVT treatment is based on the age of the clot. There are no good noninvasive methods, however, to determine clot age. Previously, we demonstrated that imaging internal mechanical strains can identify and possibly age thrombus in a deep vein. In this study the deformation geometry for DVT elasticity imaging and its effect on Young's modulus estimates is addressed. A model-based reconstruction method is presented to estimate elasticity in which the clot-containing vessel is modeled as a layered cylinder. Compared to an unconstrained approach in reconstructive elasticity imaging, the proposed model-based approach has several advantages: only one component of the strain tensor is used; the minimization procedure is very fast; the method is highly efficient because an analytic solution of the forward elastic problem is used; and the method is not very sensitive to the details of the external load pattern--a characteristic that is important for free-hand, external, surface-applied deformation. The approach was tested theoretically using a numerical model, and experimentally on both tissue-like phantoms and an animal model of DVT. Results suggest that elasticity reconstruction may prove to be a practical adjunct to triplex scanning to detect, diagnose, and stage DVT.

Aging↗

PubMed2004

Nonlinear elasticity imaging: theory and phantom study.

In tissue the Young's modulus cannot be assumed constant over a wide deformation range. For example, direct mechanical measurements on human prostate show up to a threefold increase in Young's modulus over a 10% deformation. In conventional elasticity imaging, these effects produce strain-dependent elastic contrast. Ignoring these effects generally leads to suboptimal contrast (stiffer tissues at lower strain are contrasted against softer tissues at higher strain), but measuring the nonlinear behavior results in enhanced tissue differentiation. To demonstrate the methods extracting nonlinear elastic properties, both simulations and measurements were performed on an agar-gelatin phantom. Multiple frames of phase-sensitive ultrasound data are acquired as the phantom is deformed by 12%. All interframe displacement data are brought back to the geometry of the first frame to form a three-dimensional (3-D) data set (depth, lateral, and preload dimensions). Data are fit to a 3-D second order polynomial model for each pixel that adjusts for deformation irregularities. For the phantom geometry and elastic properties considered in this paper, reconstructed frame-to-frame strain images using this model result in improved contrast to noise ratios (CNR) at all preload levels, without any sacrifice in spatial resolution. From the same model, strain hardening at all preload levels can be extracted. This is an independent contrast mechanism. Its maximum CNR occurs at 5.13% preload, and it is a 54% improvement over the best case (preload 10.6%) CNR for frame-to-frame strain reconstruction. Actual phantom measurements confirm the essential features of the simulation. Results show that modeling of the nonlinear elastic behavior has the potential to both increase detectability in elasticity imaging and provide a new independent mechanism for tissue differentiation.

Algorithms↗

PubMed2003

Notes on synthetic phased-array with 2-D sparse arrays.

Recent advances in 3-dimensional (3-D) imaging with 2-D sparse arrays have generated renewed interest in array synthesis theory. The 3-D imaging with arbitrary planar line shapes is particularly interesting. In this correspondence, we clarify some points presented in recent publications and show that aperture synthesis can be viewed with a very simple, physical approach. Its limitations due to approximations also will be discussed.

Computer-Aided Design↗

PubMed2003

Coded excitation with spectrum inversion (CEXSI) for ultrasound array imaging.

In this paper, a scheme called coded excitation with spectrum inversion (CEXSI) is presented. An established optimal binary code whose spectrum has no nulls and possesses the least variation is encoded as a burst for transmission. Using this optimal code, the decoding filter can be derived directly from its inverse spectrum. Various transmission techniques can be used to improve energy coupling within the system pass-band. We demonstrate its potential to achieve excellent decoding with very low (< 80 dB) side-lobes. For a 2.6 micros code, an array element with a center frequency of 10 MHz and fractional bandwidth of 38%, range side-lobes of about 40 dB have been achieved experimentally with little compromise in range resolution. The signal-to-noise ratio (SNR) improvement also has been characterized at about 14 dB. Along with simulations and experimental data, we present a formulation of the scheme, according to which CEXSI can be extended to improve SNR in sparse array imaging in general.

Algorithms↗

PubMed2003

Thermoelastic expansion vs. piezoelectricity for high-frequency, 2-D arrays.

Optical generation using the thermoelastic effect has traditionally suffered from low conversion efficiency. We previously demonstrated increased efficiency of nearly 20 dB with an optical absorbing layer consisting of a mixture of polydimethylsiloxane (PDMS) and carbon black spin coated onto a glass microscope slide. In this paper we show that the radiated power from a black PDMS film is comparable to a 20 MHz piezoelectric two-dimensional (2-D) array element. Furthermore, we predict that a thermoelastic array element can produce similar acoustic power levels compared to ideal piezoelectric 2-D array elements at frequencies in the 100 MHz regime. We believe these results show that thermoelastic generation of ultrasound is a promising alternative to piezoelectricity for high-frequency, 2-D arrays.

Dimethylpolysiloxanes↗

PubMed2003

A high-frequency, 2-D array element using thermoelastic expansion in PDMS.

Optical generation of ultrasound is a promising alternative to piezoelectricity for high-frequency arrays. An array element is defined by the size and location of a laser beam focused on a suitable surface. Optical generation using the thermoelastic effect has traditionally suffered from low conversion efficiency. We previously demonstrated an increase in conversion efficiency of nearly 20 dB with an optical absorbing layer consisting of a mixture of polydimethylsiloxane (PDMS) and carbon black spin coated onto a glass microscope slide. Radiation pattern measurements with an 85 MHz spherically focused transducer indicated an array element size of 20 microm. These measurements lacked the spatial resolution required to reveal fine details in the radiated acoustic field. Here we report radiation pattern measurements with a 5-microm spatial sampling, showing that the radiated acoustic field is degraded by leaky Rayleigh waves launched from the PDMS/glass interface. We demonstrate that replacing the glass with a clear PDMS substrate eliminates the leaky Rayleigh waves, producing a broad and smooth radiation pattern suitable for a two-dimensional (2-D) phased array operating at frequencies greater than 50 MHz.

Computer Simulation↗

PubMed2003

Clinical application of sonographic elasticity imaging for aging of deep venous thrombosis: preliminary findings.

OBJECTIVE: Aging of deep venous thrombosis is an important and difficult clinical problem. Because it is known that thrombi harden as they mature, we have preliminarily tested sonographic elasticity imaging, a technique that estimates tissue hardness, to age venous thrombi. METHODS: Two adult patients with lower extremity thrombi were studied. One had a clinically chronic thrombus (at least 3 years old), whereas the other patient's thrombus was clinically subacute (25 days old). We performed freehand compression sonographic scans using a 5-MHz linear array transducer. Phase-sensitive B-scan frames were processed offline by a two-dimensional complex correlation-based adaptive speckle-tracking technique. The distribution of internal strains in the wall of the vein, thrombus, and surrounding tissue was analyzed. Clot hardness was normalized to the venous wall. RESULTS: The chronic clot was homogeneous, and the strain in the chronic clot was at least 10 times smaller than that in the vessel wall. The subacute clot was much more heterogeneous, and, on average, the strain magnitude in the clot was 3 to 4 times greater than that in the vessel wall. CONCLUSIONS: In this preliminary work, the 2 thrombi appeared very different, and these results suggest that elasticity imaging may be able to age deep venous thrombosis.

Adult↗

PubMed2002

Strain imaging of corneal tissue with an ultrasound elasticity microscope.

PURPOSE: We hypothesize that high-resolution elasticity measurements can guide corrective refractive surgery of the cornea. Elasticity measurements would improve surgical outcomes by adding biomechanical information not used in existing clinical nomograms. As an initial investigation, we determined the usefulness and evaluated the ability of our ultrasound elasticity microscope by measuring strain ex vivo in an intact porcine eye globe. METHODS: Strain was predicted with a finite element model guided by direct mechanical measurements of corneal elasticity. Next, a porcine cornea was deformed with a slitted plate while being imaged with ultrasound. For high spatial resolution, the ultrasound elasticity microscope uses a 50 MHz transducer with a 1.4 f/number. It produces high-quality conventional ultrasonic B-scans over large thicknesses by confocal processing. Strain was calculated from tracking speckle in these images after deformation. This technique is compatible with in vivo measurements. RESULTS: Compressional and expansional deformations were the same order of magnitude from -3.5% to as great as +3.5%. Strain imaging indicated the stroma expanded into the slit of the deformation plate while Bowman's layer compressed. This bipolar variation within a specimen is unusual. Within the stroma, a variation of strain with depth was measured suggesting a distribution of elasticity. Results compared favorably with the finite element model. CONCLUSION: An ultrasound elasticity microscope can produce high-resolution strain images throughout the corneal depth. Various layers with different elastic properties appeared as different strains in the images.

Animals↗

PubMed2002

An integrated compliant balloon ultrasound catheter for intravascular strain imaging.

An integrated compliant balloon ultrasound catheter was developed to allow greater deformations in strain imaging with intravascular ultrasound. A 64-element circumferential array was placed inside a compliant silicone balloon catheter to capture real-time, phase-sensitive radio frequency (RF) data during deformation experiments. Strains over 40% could be applied to normal arterial wall tissue with intracatheter pressures as low as 200 kPa (2 atm). Strain images of a hard-soft rubber phantom, thrombus, and fibrotic plaque were produced using the integrated balloon ultrasound catheter. Results show that this catheter can apply large deformations at low pressures and image various vascular pathologies ex vivo. Potentially, it can serve as a multifunctional, intravascular therapeutic device to guide angioplasty and stent deployment.

Animals↗

PubMed2002

Optimizing the beam pattern of a forward-viewing ring-annular ultrasound array for intravascular imaging.

Intravascular ultrasound (IVUS) imaging systems using circumferential arrays mounted on cardiac catheter tips fire beams orthogonal to the principal axis of the catheter. The system produces high resolution cross-sectional images but must be guided by conventional angioscopy. A real-time forward-viewing array, integrated into the same catheter, could greatly reduce radiation exposure by decreasing angiographic guidance. Unfortunately, the mounting requirement of a catheter guide wire prohibits a full-disk imaging aperture. Given only an annulus of array elements, prior theoretical investigations have only considered a circular ring of point transceivers and focusing strategies using all elements in the highly dense array, both impractical assumptions. In this paper, we consider a practical array geometry and signal processing architecture for a forward-viewing IVUS system. Our specific design uses a total of 210 transceiver firings with synthetic reconstruction for a given 3-D image frame. Simulation results demonstrate this design can achieve side-lobes under -40 dB for on-axis situations and under -30 dB for steering to the edge of a 80 degrees cone.

Blood Vessels↗