Search PubMed⌕ Search

Biomedical subjects

Masahiko Abe

Publications and source records attributed to Masahiko Abe.

At least 37 records · Page 2Linked to original sources
PubMed2004

Monolayer membranes and bilayer vesicles characterized by alpha- and beta-anomer of sulfoquinovosyldiacyglycerol (SQDG).

Physicochemical properties of 1,2-di-O-stearoyl-3-O-(6-deoxy-6-sulfo-alpha-D-glucopyranosyl)-sn-glycerol (alpha-SQDG-C(18:0)) and 1,2-di-O-stearoyl-3-O-(6-deoxy-6-sulfo-beta-D-glucopyranosyl)-sn-glycerol (beta-SQDG-C(18:0)) in monolayer and bilayer membranes were examined. Surface pressure measurements in monolayer membranes indicated the molecular area of beta-SQDG-C(18:0) to be slightly smaller than that of alpha-SQDG-C(18:0). In bilayer membranes, the phase transition temperature and the enthalpy of beta-SQDG-C(18:0) were higher than those of alpha-SQDG-C(18:0), while the trapping efficiency of beta-SQDG-C(18:0) vesicles was lower. The results suggested tighter packing with beta-SQDG-C(18:0) than alpha-SQDG-C(18:0), due to differences in the head group stereochemistry. High-performance liquid chromatography-electrospray ionization ion trap mass spectrometry (HPLC-ESI-MS) data and computational modeling studies provided supporting evidence for morphological differences. In both monolayer and bilayer membranes, the affinity of beta-SQDG-C(18:0) with cholesterol was greater than that of alpha-SQDG-C(18:0), again due to the differences in head group properties. Turbidity measurement and microscopic examination of alpha- and beta-SQDG-C(18:0)/cholesterol mixtures confirmed formation of large vesicles. The addition of cholesterol to SQDG-C(18:0) optimized membrane formation and stabilized its structure.

Calorimetry, Differential Scanning↗
PubMed2004

Control of photoreaction of amphiphilic spiropyran/n-alkane Langmuir and Langmuir-Blodgett films using the phase transition of n-alkane.

The structures and photoreactions of Langmuir and Langmuir-Blodgett (LB) films of an amphiphilic spiropyran, 1',3'-dihydro-3',3'-dimethyl-6-nitro-1'-octadecyl-8-(docosanoyloxymethyl)spiro[2H-1-benzopyran-2,2'-(2H)-indole] (SP), mixed with n-alkane are investigated. The mixing ratio was fixed at 1/2 for SP/n-alkane. The surface pressure-area isotherms of SP/octadecane are categorized into two regimes: a low-temperature regime where octadecane is packed with the alkyl chains of SP, and a high-temperature regime where the addition of octadecane does not influence the isotherms significantly. The temperature dividing the two regimes is related with the melting point of the n-alkane mixed with SP in the bulk. UV irradiation of the Langmuir film in the high-temperature regime gives rise to light-induced J-aggregation, whereas that in the low-temperature regime causes only the isomerization of SP to the corresponding merocyanine, indicating that J-aggregation is hindered by the presence of n-alkane in the low-temperature regime. IR external reflection spectroscopy of the Langmuir films shows that n-alkane is released from the film during J-aggregation. The structural changes of the mixed Langmuir and LB films during J-aggregation are almost the same with those of the films of pure SP.

Alkanes↗
PubMed2004

Control of viscoelasticity using redox reaction.

The viscoelasticity of a fluid was tuned with the Faradaic reaction of (11-ferrocenylundecyl)trimethylammonium bromide (FTMA), a "redox-switchable" surfactant. An aqueous solution of the reduced form of FTMA exhibited a remarkable viscoelasticity in the presence of sodium salicylate (NaSal) because of the formation of three-dimensional entanglement of wormlike micelles. Electrolytic oxidation of FTMA caused the viscosity of the system to dramatically decrease and the elasticity to disappear. This drastic decrease in viscoelasticity arose from the disruption of wormlike micelles. This novel electrorheological phenomenon is expected to be applicable to ink for inkjet printers, the electrochemically controlled release of substances entrapped in wormlike micelles of FTMA, and fluid flow rate control using electric signals.

Journal Article↗
PubMed2004

Inhibitory effect of lysophosphatidylcholine on pancreatic lipase-mediated hydrolysis in lipid emulsion.

In the lipid metabolism pathway, dietary lipid emulsified with bile salts and phospholipids is mainly digested by pancreatic lipase into free fatty acids and monoacylglycerols. In order to study substrate recognition mechanism of a pancreatic lipase, we investigated its catalytic property toward the lipid emulsion prepared with long- or intermediate-chain acylglycerols and several physiological surfactants. When lysophosphatidylcholine (LysoPC), rather than bile salts or phospholipid, was incorporated into the lipid emulsion, it caused an increase in the Km(app) and a decrease in the Vmax(app) values in the interactions between the lipase and triacylglycerol (triolein or tricaprin). This indicated that LysoPC inhibited hydrolysis by decreasing both the substrate affinities and the catalytic activity of this lipase. Interestingly, further addition of taurodeoxycholic acid sodium salts or phospholipid completely restored the inhibitory effect of LysoPC on hydrolysis by lipase. On the other hand, the change in these kinetic values between the lipase and two 1-monoacylglycerols (1-monocaprin and 1-monoolein) were not particularly large when LysoPC was added. Particle size analysis of the lipid emulsion composed of LysoPC and triacylglycerols showed that most of the particles were less than 200 nm in size, which was smaller than the particle size in the triacylglycerol emulsions containing bile salts or phospholipid. The composition of the emulsion would affect its surface characteristics and thus contribute to changing lipase activity.

Animals↗
PubMed2004

Control of particle alignment in water by an alternating electric field.

We attempted to align a large number of silica particles dispersed in aqueous solution by controlling the alternating electric field between the two electrodes (400 microm apart). Relatively large particles (9.9 microm) were found to align forming strings in the direction parallel to the electric field while relatively small particles (2.0 and 4.9 microm) were observed to align making stripes in the direction perpendicular to the field. The number of stripes formed by particles between the electrodes increased with increasing frequency of the alternating field. This peculiar perpendicular particle alignment appeared when the contribution to particle alignment of electroosmotic flow exceeded that of dielectric polarization and the osmotic flow was found to be stronger around the particles than in the vicinity of the electrode surface.

Journal Article↗
PubMed2004

Surface activity of myristic acid in the poly(methyl methacrylate)/supercritical carbon dioxide system.

To confirm the surface activity of myristic acid in the dispersion polymerization of vinyl monomers in scCO2, the interfacial tension (IFT) at the polymer/supercritical carbon dioxide (scCO2) interface has been measured. For the IFT measurements, a high-pressure pendant drop apparatus was constructed. The IFT data was obtained by the axisymmetric drop shape analysis of melt polymer droplets formed at the tip of a capillary. The reliability of the apparatus was confirmed by measuring the IFT of polystyrene (PS)/scCO2 and polypropylene (PP)/CO2 systems. The IFT of the poly(methyl methacrylate) (PMMA)/scCO2 system with and without myristic acid was also measured. The IFT decreased on addition of myristic acid. The magnitude of the IFT depression due to the myristic acid was comparable to that of PS/scCO2 systems with the block copolymer surfactant, PS-b-poly(fluorooctyl acrylate). The surface activity of the myristic acid was confirmed by the decrease of IFT.

Journal Article↗
PubMed2004

Brewster angle microscopic observations of the Langmuir films of amphiphilic spiropyran during compression and under UV illumination.

The structure of the Langmuir film of an amphiphilic spiropyran, 1',3'-dihydro-3',3'-dimethyl-6-nitro-l'-octadecyl-8-(docosanoyloxyme thyl)spiro[2H-1-benzopyran-2,2'-(2H)-indole] (SP), is investigated using Brewster angle microscopy (BAM). The BAM observations show that the Langmuir film of SP can be roughly categorized into three regimes: a low-temperature regime at 7-13 degrees C; a medium-temperature regime at 23-30 degrees C; a high-temperature regime at 40 degrees C. The low-temperature regime is characterized both by the domains that are formed just after the spreading and by the onset of the surface pressure when the domains are merged together to form continuous trilayers. In the medium-temperature regime, a continuous monolayer film is formed after the solvent evaporation, followed by the growth of "embryos" with compression. Around the phase transition point, the "embryos" serve as the "nucleation sites" of the circular trilayer domains. The characteristic features of the high-temperature regime are similar to the ones of the medium-temperature regime except for the absence of a steep rise in surface pressure after the plateau region and the absence of the circular trilayer domains. UV illumination of the Langmuir films leads to the isomerization of SP into merocyanine (MC). However, J-aggregates of MC are formed only when the circular trilayer domains are present. On the basis of the above results, we present a phase diagram of the Langmuir film of SP. The structure and photoreaction depend strongly on the phase of the Langmuir film, indicating that the area/molecule is not the only decisive parameter.

Benzopyrans↗
PubMed2004

Three-dimensional arrangements of polystyrene latex particles with a hyperbolic quadruple electrode system.

An attempt was made to arrange polystyrene latex particles (2, 5, and 10 microm in diameter) dispersed in aqueous media making use of their dielectrophoresis and electrophoresis with a hyperbolic quadruple electrode system. Application of a high-frequency ac field enabled the particles to arrange themselves between the electrodes forming a particle monolayer due to the negative dielectrophoretic force. Simultaneous application of high-frequency ac and dc fields caused the particles to gather in the region surrounded by the electrodes to form particle multilayers. Appropriate choice of the way of applying an electric field thus allowed the reversible control of particle arrangements (monolayer, multilayer, dispersion). Reapplication of an ac field to the particle layers produced highly dense particle multilayers.

Journal Article↗
PubMed2004

Membrane properties of binary and ternary systems of ganglioside GM1/dipalmitoylphosphatidylcholine/dioleoylphosphatidylcholine.

The membrane properties of the ganglioside GM1 (GM1)/dioleoylphosphatidylcholine (DOPC) binary system and GM1/dipalmitoylphosphatidylcholine (DPPC)/DOPC ternary system were investigated using surface pressure measurements and atomic force microscopy (AFM), and the effect of surface pressure on the properties of the membranes was examined. Mixed GM1/DPPC/DOPC monolayers were deposited on mica using the Langmuir-Blodgett technique for AFM. GM1 and DOPC were immiscible and phase-separated. The AFM image of the GM1/DOPC (1:1) monolayer showed island-like GM1 domains embedded in the DOPC matrix. There was no morphological change on varying surface pressure. The surface pressure-area isotherm of the GM1/DPPC/DOPC (2:9:9) monolayer showed a two-step collapse as in the DPPC/DOPC (1:1) monolayer. The AFM image for the GM1/DPPC/DOPC monolayer showed DPPC and GM1 domains in the DOPC matrix, and the DPPC-rich phase containing GM1 showed a percolation pattern the same as the GM1/DPPC (1:9) monolayer. The percolation pattern in the GM1/DPPC/DOPC monolayer changed as the surface pressure was varied. The surface pressure-responsive change in morphology of GM1 was affected by the surrounding environment, suggesting that the GM1 localized in each organ has a specific role.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed2004

Interfacial properties of branch-tailed fluorinated surfactants yielding a water/supercritical CO2 microemulsion.

We have examined the interfacial properties of several fluorinated surfactants in a water/CO2 mixture with a pendant drop tensiometer and revealed the relationships between the interfacial properties, the surfactant structure, and the microemulsifying power. We employed the following Aerosol-OT analogue surfactants that have two fluorinated tails: bis(1H,1H,5H-octafluoropentyl)-2-sulfosuccinate (di-HCF4), sodium bis(1H,1H,9H-hexadecafluorononyl)-2-sulfosuccinate (di-HCF8), sodium bis(1H,1H,2H,2H-heptadecafluorodecyl)-2-sulfosuccinate (8FS(EO)2), and sodium bis((1H,1H,2H,2H-heptadecafluorodecyl)-oxyethylene)-2-sulfosuccinate (8FS(EO)4). To discuss the effect of the fluorocarbon/hydrocarbon ratio in single surfactant molecules, water/CO2 interfacial tension (IFT) of a hybrid surfactant with one fluorocarbon and one hydrocarbon tail, that of a surfactant with a single fluorinated tail, and that of a hydrocarbon surfactant, Aerosol-OT (AOT), were examined. The hybrid surfactant employed was sodium 1-oxo-1-[4-(tridecafluorohexyl)phenyl]-2-hexanesulfonate (FC6-HC4), and the single-tailed surfactant was perfluoropolyether ammonium carboxylate (PFPECOONH4, CF3CF2(CF2OCF(CF3))4COONH4). All of the fluorinated AOT analogue surfactants exhibited an excellent level of activity at the water/CO2 interface compared with other fluorinated surfactants and AOT. With a larger hydrocarbon chain number in the CO2-philic tails (i.e., from 0 to 2), the IFT of the AOT analogue surfactants was increased. The area occupied by one surfactant molecule at the water/CO2 interface, A, and the critical microemulsion concentration, cmicroc, were determined and used to examine the water-to-surfactant molar ratio within a reversed micelle, W0c, of the surfactants. The surfactants that form W/scCO2 microemulsions with a large W0c were found to lower the interfacial tension efficiently irrespective of increases in temperature. To achieve the most desirable W0C, the surfactant needs not only a high CO2-philicity of the tails but also a high Krafft point, properties which induce a low hydrophilic/CO2-philic balance.

Carbon Dioxide↗
PubMed2004

Temperature-dependent vesicle formation of aqueous solutions of mixed cationic and anionic surfactants.

The phase behavior of aqueous solutions of mixed cetyltrimethylammonium bromide (CTAB) and sodium octyl sulfate (SOS) was examined at different temperatures (20, 30, 40, and 50 degrees C). While stable vesicles were formed in a narrow composition range on the SOS-rich side at 20 degrees C, the range widened remarkably when the temperature was raised to 30 degrees C. Thus, the vesicle region extended to cover almost the entire composition range, CTAB:SOS = 0.5:9.5-5.0:5.0, at the total surfactant concentrations of 50-70 mM on the SOS-rich side. To analyze the temperature dependence of this phase behavior of the mixed surfactant system, DSC and fluorescence polarization measurements were performed on the system. The experimental findings obtained revealed that pseudo-double-tailed CTAB/SOS complex, the major component of the bimolecular membrane formed by the surfactant mixture, undergoes a gel (Lbeta)-liquid crystal (Lalpha) phase transition at about 26 degrees C. This phenomenon was interpreted as showing that the bimolecular membrane has no curvature and is rigid and easy to precipitate at temperatures below the phase transition point, whereas it has a curvature and is loose enough to disperse in the solution as vesicles at temperatures above the phase transition point. Vesicles formed by the anionic/cationic surfactant complex were then stable at temperatures above the phase transition temperature of the complex.

Journal Article↗
PubMed2004

Effect of membrane composition on surface states of ganglioside GM1/dipalmitoylphosphatidylcholine/dioleoylphosphatidylcholine monolayers.

The surface states of ganglioside GM1 (GM1)/dipalmitoylphosphatidylcholine (DPPC)/dioleoylphosphatidylcholine (DOPC) monolayers having various compositions were investigated using atomic force microscopy (AFM), and the effect of the composition on the surface states of the membrane was examined. The AFM images for the ternary system showed a DPPC-rich phase containing GM1 in the DOPC matrix, which indicated that the morphology varied as the composition of the monolayers changed. The AFM images for the GM1/DPPC/DOPC monolayers having (2:9:9) and (4:18:9) molar ratios showed a percolation pattern similar to that observed for the GM1/DPPC (1:9) monolayer. The AFM image for the GM1/DPPC/DOPC (2:18:9) monolayer showed a dotted pattern with a high topography. Monolayers having a higher content of DOPC than DPPC and/or having a higher content of GM1 showed dot-like domains in the DPPC-rich phase containing GM1. In conclusion, the surface states of GM1/DPPC/DOPC monolayers changed depending on the composition. These results may be related to a diversity of GM1 in various organs.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed2004

Thermal hysteresis in the photoresponsivity of a langmuir film of amphiphilic spiropyran.

We have found a thermal hysteresis in the photoresponsivity of a Langmuir film for the first time. The Langmuir film of an amphiphilic spiropyran, 1',3'-dihydro-3',3'-dimethyl-6-nitro-1'-octadecyl-8-(docosanoyloxymethyl)spiro[2H-1-benzopyran-2,2'-(2H)-indole] (SP) was fabricated at 13 degrees C at 10 mN m-1, followed by heating to a given temperature. UV irradiation of this film caused only the isomerization of SP to the corresponding merocyanine (MC) up to 29 degrees C. Light-induced J-aggregation of MC occurred at 30 degrees C. On the other hand, once the film was heated to 30 degrees C, light-induced J-aggregation was observed down to 27 degrees C. The hysteresis should be related with the phase transitions that occur in the bulk of SP at similar temperatures. No significant morphological change occurred by light-induced J-aggregation in the Langmuir-Blodgett (LB) film of SP by the present method, in contrast to the case of the LB films fabricated under isothermal conditions at 30 degrees C. This feature enabled us to pattern the LB film with J-aggregate of MC by UV irradiation through a photomask of lines with a width of 5 mum each.

Journal Article↗
PubMed2003

Microstructures in the aqueous solutions of a hybrid anionic fluorocarbon/hydrocarbon surfactant.

The aqueous solutions of the anionic hybrid fluorocarbon/hydrocarbon surfactant sodium 1-oxo-1[4-(tridecafluorohexyl)phenyl]-2-hexanesulfate (FC6HC4) shows peculiar rheological behavior. At 25 degrees C the viscosity vs concentration curve goes successively through a maximum and a minimum, while the viscosity vs temperature curve of the 10 wt% aqueous FC6HC4 solution goes through a marked maximum at 36 degrees C [Tobita et al., Langmuir 13 (1997) 5054]. In an attempt to explain these properties the microstructure of aqueous solutions of FC6HC4 has been investigated by means of digital light microscopy, transmission electron microscopy at cryogenic temperature (cryo-TEM), rheology, and self-diffusion NMR. At 20 degrees C, the increase of the FC6HC4 concentration was found to result in a progressive change of structure of the surfactant assemblies from mainly spherical micelles at 0.5 wt% to mainly cylindrical micelles at 10 wt%. At intermediate concentrations small disk-like micelles and small complete and incomplete vesicles coexisting with cylindrical micelles were visualized. The occurrence of stretched cylindrical micelles is responsible for the effect of the surfactant concentration on the solution viscosity. Cryo-TEM, rheology, and self-diffusion NMR all suggest that an increase of the temperature brings about a growth of the assemblies present in the 10 wt% solution of FC6HC4. The structure of the assemblies present at the temperature where the viscosity is a maximum could not be elucidated by cryo-TEM because of the probable occurrence of an on-the-grid phase transformation, the result of blotting during specimen preparation. Nevertheless, the results show that the observed large assemblies break up at higher temperature to give rise to a more labile bicontinuous structure that consists of multi-connected disordered lamellae, with many folds and creases, and that may well be the L3 phase.

Journal Article↗
PubMed2003

Controlled release of vitamin E from thermo-responsive polymeric physico-gel.

Thermo-sensitive copolymer consists of poly(2-ethoxyethyl vinyl ether) and poly(hydroxyethyl vinyl ether) (EOVE200-HOVE400), whose sol-gel transition temperature was 20.5 degrees C, was synthesized and its applicability to a drug delivery system was examined. Vitamin E (VE) was enclosed in EOVE200-HOVE400 and the release of VE was measured by varying the temperature 10<-->30 degrees C. There was no release of VE from EOVE200-HOVE400 at 30 degrees C, while VE was released when the temperature was reduced to 10 degrees C.

Drug Delivery Systems↗
PubMed2003

Effects of poly(ethylene glycol) (PEG) chain length of PEG-lipid on the permeability of liposomal bilayer membranes.

The effects of poly(ethylene glycol) (PEG) chain length of PEG-lipid on the membrane characteristics of liposomes were investigated by differential scanning calorimetry (DSC), freeze-fracture electron microscopy (FFEM), fluorescence polarization measurement and permeability measurement using carboxyfluorescein (CF). PEG-liposomes were prepared from mixtures of dipalmitoyl phosphatidylcholine (DPPC) and distearoyl phosphatidylethanolamines with covalently attached PEG molecular weights of 1000, 2000, 3000 and 5000 (DSPE-PEG). DSC and FFEM results showed that the addition of DSPE-PEG to DPPC in the preparation of liposomes caused the lateral phase separation both in the gel and liquid-crystalline states. The fluidity in the hydrocarbon region of liposomal bilayer membranes was not significantly changed by the addition of DSPE-PEG, while that in the interfacial region was markedly increased. From these results, it was anticipated that the CF leakage from PEG-liposomes is accelerated compared with DPPC liposomes. However, CF leakage from liposomes containing DSPE-PEG with a 0.060 mol fraction was depressed compared with regular liposomes, and the leakage decreased with increasing PEG chain length. Furthermore, the CF leakage from liposomes containing DSPE-PEG with a 0.145 mol fraction was slightly increased compared with that of liposomes containing DSPE-PEG with a 0.060 mol fraction. It is suggested that the solute permeability from the PEG-liposomes was affected by not only properties of the liposomal bilayer membranes such as phase transition temperature, phase separation and membrane fluidity, but also the PEG chain of the liposomal surface.

Lipid Bilayers↗