Search PubMed⌕ Search

Biomedical subjects

Martin F Jarrold

Publications and source records attributed to Martin F Jarrold.

At least 19 recordsLinked to original sources

Negative droplets from positive electrospray.

Image charge detection has been used to measure the charge and velocity of individual electrosprayed water droplets. With a positive bias on the electrospray needle the majority of the droplets are, as expected, positively charged. However, a small fraction, surprisingly, carry a negative charge. Plausible explanations for the presence of the negatively charged droplets are discussed. In particular, we consider the possibility of the negatively charged droplets resulting from a bipolar fission process where the incorporation of a small negatively charged droplet between two larger positively charged progeny lowers the energy barrier for symmetric fission.

Journal Article↗

Ion calorimetry: Using mass spectrometry to measure melting points.

Calorimetry measurements have been used to probe the melting of aluminum cluster cations with 63 to 83 atoms. Heat capacities were determined as a function of temperature (from 150 to 1050 K) for size-selected cluster ions using an approach based on multicollision-induced dissociation. The experimental method is described in detail and the assumptions are critically evaluated. Most of the aluminum clusters in the size range examined here show a distinct peak in their heat capacities that is attributed to a melting transition (the peak is due to the latent heat). The melting temperatures are below the bulk melting point and show enormous fluctuations as a function of cluster size. Some clusters (for example, n = 64, 68, and 69) do not show peaks in their heat capacities. This behavior is probably due to the clusters having a disordered solid-like phase, so that melting occurs without a latent heat.

Journal Article↗

An IMS-IMS analogue of MS-MS.

The development of a new ion mobility/mass spectrometry instrument that incorporates a multifield drift tube/ion funnel design is described. In this instrument, individual components from a mixture of ions can be resolved and selected on the basis of mobility differences prior to collisional activation inside the drift tube. The fragment ions that are produced can be dispersed again in a second ion mobility spectrometry (IMS) region prior to additional collisional activation and MS analysis. The result is an IMS-IMS analogue of MS-MS. Here, we describe the preliminary instrumental design and experimental approach. We illustrate the approach by examining the highly characterized bradykinin and ubiquitin systems. Mobility-resolved fragment ions of bradykinin show that b-type ions are readily discernible fragments, because they exist as two easily resolvable structural types. Current limitations and future directions are briefly discussed.

Bradykinin↗

Proton transfer-induced conformational changes and melting in designed peptides in the gas phase.

The conformations of protonated RA15K, RA20K and RA15H (R = arginine, A = alanine, K = lysine, and H = histidine) have been examined in the gas phase as a function of temperature. These peptides were designed so that intramolecular proton transfer will trigger conformational changes between a helix (proton sequestered at the C-terminus) and globule (proton sequestered at the N-terminus). Kinetically controlled structural transitions occur below 400 K (from helix to globule for RA15H, and from globule to helix for RA15K and RA20K). As the temperature is raised, the compact globule found at room temperature expands, accesses more configurations, and becomes entropically favored. At around 500 K, the RA15K and RA20K helices undergo a melting transition. The transition is broad, as expected for a phase transition in a finite system, and becomes narrower as the peptide size increases. In the helical conformation, the two basic residues are well separated; as a result, the proton transfer necessary to drive the melting transition probably involves a mobile proton. For doubly protonated RA15K, a dumbbell-like conformation (resulting from repulsion between the two protonated basic residues) is found at high temperature.

Gases↗

Stable copper-tin cluster compositions from high-temperature annealing.

Copper-doped tin clusters can be thermally annealed to much more stable compositions with a substantially higher copper/tin ratio. The annealed clusters are only prominent over a narrow range of compositions: CuSn(10-15)+, Cu2Sn(12-18)+, Cu3Sn(15-21)+, Cu4Sn(18-(24)+, and Cu5Sn(21-(27)+. These compositions are close to those found for W(m)Si(n)+ clusters, raising the possibility that the Cu(m)Sn(n)+ clusters have core-shell geometries like those proposed for the W(m)Si(n)+ clusters. Increasing the number of copper atoms causes a change in the dissociation pattern from the fission processes that are characteristic of semiconductor clusters to the expulsion of individual atoms, which usually occurs for metal clusters. The change in the fragmentation pattern may result because the clusters rich in copper melt before they dissociate, while the pure tin clusters dissociate directly from a solidlike phase.

Journal Article↗

Second-order phase transitions in amorphous gallium clusters.

Ion mobility and calorimetry measurements have been used to probe the nature of the phase transitions in gallium clusters with 29-55 atoms. While most clusters appear to undergo a first-order transition between solidlike and liquidlike phases, a few show the signature of melting without a significant latent heat. These transitions appear to be the finite size analogue of a second-order phase transition, and they presumably occur for some cluster sizes because their solidlike phase is amorphous.

Journal Article↗

Left-handed and ambidextrous helices in the gas phase.

We have used ion mobility mass spectrometry to study the effect of d-residues on helix formation in unsolvated alanine-based peptides. The right-handed helix of AC-A15K + H+ is significantly disrupted when five or more of the natural L-residues are randomly replaced with D-residues. On the other hand, when a block of L-residues is replaced with D-residues, an unusual ambidextrous structure with helical segments of opposite chirality is formed. A peptide with all D-residues forms a left-handed helix.

Amino Acid Substitution↗

Melting, premelting, and structural transitions in size-selected aluminum clusters with around 55 atoms.

Heat capacities have been determined for unsupported aluminum clusters, Al49(+) - Al63(+), from 150 to 1050 K. Peaks in the heat capacities due to melting occur between 450 and 650 K (well below the bulk melting point of 933 K). The peaks for Al+51 and Al+52 are bimodal, suggesting the presence of a premelting transition where the surface of the clusters melts around 100 K before the core. For clusters with n > 55 the melting temperatures suddenly drop, and there is a dip in the heat capacities due to a transition between two solid forms before the clusters melt.

Journal Article↗

Non-covalent interactions between unsolvated peptides: helical complexes based on acid-base interactions.

We have used ion-mobility mass spectrometry to examine the conformations of the protonated complex formed between AcA(7)KA(6)KK and AcEA(7)EA(7), helical alanine-based peptides that incorporate glutamic acid (E) and lysine (K). Designed interactions between the acidic E and basic K residues help to stabilize the complex, which is generated by electrospray and studied in the gas phase. There are two main conformations: (1) a coaxial linear arrangement where the helices are tethered together by an EKK interaction between the pair of lysines at the C-terminus of the AcA(7)KA(6)KK peptide and a glutamic acid at the N-terminus of the AcEA(7)EA(7) peptide and (2) a coiled-coil arrangement with side-by-side antiparallel helices where there is an additional EK interaction between the E and K residues in the middle of the helices. The coiled-coil opens up to the coaxial linear structure as the temperature is raised. Entropy and enthalpy changes for the opening of the coiled-coil were derived from the measurements. The enthalpy change indicates that the interaction between the E and K residues in the middle of the helices is a weak neutral hydrogen bond. The EKK interaction is significantly stronger.

Amino Acids, Acidic↗

Entropic stabilization of isolated beta-sheets.

Temperature-dependent electric deflection measurements have been performed for a series of unsolvated alanine-based peptides (Ac-WA(n)-NH(2), where Ac = acetyl, W = tryptophan, A = alanine, and n = 3, 5, 10, 13, and 15). The measurements are interpreted using Monte Carlo simulations performed with a parallel tempering algorithm. Despite alanine's high helix propensity in solution, the results suggest that unsolvated Ac-WA(n)-NH(2) peptides with n > 10 adopt beta-sheet conformations at room temperature. Previous studies have shown that protonated alanine-based peptides adopt helical or globular conformations in the gas phase, depending on the location of the charge. Thus, the charge more than anything else controls the structure.

Alanine↗

Ion funnels for the masses: experiments and simulations with a simplified ion funnel.

A modified ion funnel is described. Counterintuitively, increased spacing between electrodes results in enhanced "focusing" of the ions through the funnel. Consequently, the internal diameter (i.d.) of the funnel need not decrease to the conductance limit (as in previous designs). A simple dc-only lens, which also serves as the conductance limit, combined with the natural flow of gas is used to extract the ions from the funnel. Ions with mass to charge ratios varying between 75 and 3000 m/z are passed through the funnel with no apparent discrimination. The funnel can be operated under mild conditions that preserve weakly bound noncovalent complexes. After testing several designs, a thin closely spaced dc lens was found to be the best solution for extracting ions. A simple method for simulating ion trajectories at nonzero pressures based on ion mobility and explicit diffusion is described. This theoretical approach was used to design and calculate ion trajectories for the modified funnel presented here. Finally, the increased spacing between electrodes in the current funnel significantly relaxes machining constraints, reduces cost, and enhances ease of use versus previous funnel designs.

Computer Simulation↗

The mobile proton in polyalanine peptides.

Ion mobility measurements have been performed for protonated polyalanine peptides (A10 + H+, A15 + H+, A20 + H+, A25 + H+, and A15NH2 + H+) as a function of temperature using a new high-temperature drift tube. Peaks due to helices and globules were found at room temperature for all peptides, except for A10 + H+ (where only the globule is present). As the temperature is increased, the helix and globule peaks broaden and merge to give a single narrow peak. This indicates that the two conformations interconvert rapidly at elevated temperatures. The positions of the merged peaks show that A15 + H+ and A15NH2 + H+ spend most of their time as globules when heated, while A20 + H+ and A25 + H+ spend most of their time as helices. The helix/globule transitions are almost certainly accompanied by intramolecular proton transfer, and so, these results suggest that the proton becomes mobile (able to migrate freely along the backbone) at around 450 K. The peptides dissociate as the temperature is increased further to give predominantly the bn(+), b(n-1)(+), b(n-2)(+), ... series of fragment ions. There is a correlation between the ease of fragmentation and the time spent in the helical conformation for the An + H+ peptides. Helix formation promotes dissociation because it pools the proton at the C-terminus where it is required for dissociation to give the observed products. In addition to the helix and globule, an antiparallel helical dimer is observed for the larger peptides. The dimer can be collisionally dissociated by injection into the drift tube at elevated kinetic energies.

Alanine↗

Melting, freezing, sublimation, and phase coexistence in sodium chloride nanocrystals.

Calorimetry measurements, performed by multicollision induced dissociation, have been used to probe the melting of a number of (NaCl)nNa+ clusters with n=22-37. The clusters anneal at 225-325 K and melt at 750-850 K. (NaCl)22Na+ and (NaCl)37Na+, which can adopt geometries that are perfect fragments of the bulk lattice melt at around 850 K. The other clusters, which (except for n=31) must have defects, melt at temperatures which are up to 100 K lower than the perfect nanocrystals. The internal energy distributions become bimodal near the melting temperature. This is the signature of slow dynamic phase coexistence where clusters spontaneously jump back and forth between the solid and liquid states with an average period that is longer than required for thermal equilibration. The jump frequency must be between 10(4) and 10(7) s(-1) for the bimodal distribution to be observable in our experiments. The (NaCl)nNa+ clusters can dissociate by an unusual thermally activated process where melting and freezing raise the internal energy to generate hot solid clusters that can sublime before they cool to the ambient temperature.

Journal Article↗

Gallium cluster "magic melters".

Calorimetry measurements (using a method based on multicollision induced dissociation) have been performed for unsupported gallium clusters, Gan+ (n = 30-50 and 55). Melting transitions have been identified from spikes in the heat capacities recorded as a function of temperature. There are enormous fluctuations in the melting temperatures and the heats of fusion with cluster size. Clusters with n = 31, 33, 37, and 45-47 are "magic melters" with particularly well-defined melting transitions. There is a strong correlation between the heats of fusion, entropies of fusion, and the stabilities of the clusters. However, these quantities are not strongly correlated with the melting temperatures.

Journal Article↗

Water molecule adsorption on short alanine peptides: how short is the shortest gas-phase alanine-based helix?

Water adsorption measurements have been performed under equilibrium conditions for unsolvated Ac-A(n)K+H(+) and Ac-KA(n)+H(+) peptides with n = 4 - 10. Previous work on larger alanine peptides has shown that two dominant conformations (helices and globules) are present for these peptides and that water adsorbs much more strongly to the globules than to the helices. All the Ac-KA(n)+H(+) peptides studied here (which are expected to be globular) adsorb water strongly, and so do the Ac-A(n)K+H(+) peptides with n < 8. However, for Ac-A(n)K+H(+) with n = 8-10 there is a substantial drop in the propensity to adsorb water. This result suggests that Ac-A(8)K+H(+) is the smallest Ac-A(n)K+H(+) peptide to have a significant helical content in the gas phase. Water adsorption measurements for Ac-V(n)K+H(+) and Ac-L(n)K+H(+) with n = 5-10 suggest that the helix emerges at n = 8 for these peptides as well.

Adsorption↗

Extreme stability of an unsolvated alpha-helix.

High-temperature ion mobility measurements have been performed for alpha-helical Ac-A15K+H+ and globular Ac-KA15+H+ peptides. The alpha-helical and globular conformations do not melt into random coils as the temperature is raised. Instead, both conformations survive to the point where the peptide signals vanishes due to fragmentation. This occurs at 600 K for the globular Ac-KA15+H+ peptide and at 725 K for the alpha-helical Ac-A15K+H+. For the helical Ac-A15K+H+ peptide it appears that fragmentation is triggered by disruption of the helical conformation.

Alanine↗

Application of evolutionary algorithm methods to polypeptide folding: comparison with experimental results for unsolvated Ac-(Ala-Gly-Gly)5-LysH+.

We present an evolutionary method for finding the low-energy conformations of polypeptides. The application, called FOLDAWAY,is based on a generic framework and uses several evolutionary operators as well as local optimization to navigate the complex energy landscape of polypeptides. It maintains two complementary representations of the structures and uses the CHARMM force field for evaluating the energies. The method is applied to unsolvated Met-enkephalin and Ac-(Ala-Gly-Gly)(5)-Lys(+)H(+). Unsolvated Ac-(Ala-Gly-Gly)(5)-Lys(+)H(+) has been the object of recent experimental studies using ion mobility measurements. It has a flat energy landscape where helical and globular conformations have similar energies. FOLDAWAY locates several large groups of structures not found in previous molecular dynamics simulations for this peptide, including compact globular conformations, which are probably present in the experiments. However, the relative energies of the different conformations found by FOLDAWAY do not accurately match the relative energies expected from the experimental observations.

Algorithms↗

Pi-helix preference in unsolvated peptides.

Ion mobility measurements have been used to examine helix formations in the gas phase for a series of alanine/glycine-based peptides that incorporate a glutamic acid (E) and lysine (K) at various positions along the backbone. Incorporation of an EK pair lowers the percent helix for all positions (presumably because hydrogen bonding between the backbone and the E and K side chains stabilize the nonhelical globular conformations). The largest percent helix is found when the EK pair is in an i,i+5 arrangement, which suggests that the preferred helical conformation for these peptides is a pi-helix. This conclusion is supported by comparison of cross sections deduced from the ion-mobility measurements to average cross sections calculated for conformations obtained from molecular dynamics simulations. The glutamic acid and lysine may form an ion pair that is stabilized by interactions with the helix macro-dipole.

Alanine↗