Search PubMed⌕ Search

Biomedical subjects

Mark C M van Loosdrecht

Publications and source records attributed to Mark C M van Loosdrecht.

17 recordsLinked to original sources

Genome-Resolved Metagenomics Revealed the Functional Potential of Core Novel and Known Genera Key to Processes in Full-Scale Aerobic Granular Sludge Plants.

Microbial communities are critical for nutrient removal in aerobic granular sludge (AGS) wastewater treatment plants (WWTPs). Despite the stable long-term operation of full-scale AGS WWTPs, the microbial populations and functional traits sustaining stable long-term performance remain poorly resolved. To address this gap, the recovered MAG catalog from nine full-scale AGS WWTPs across five countries was analyzed. From this catalog, 74 high-quality core MAGs were identified and used for downstream taxonomic characterization and functional analyses. These high-quality core MAGs spanned 48 established and 7 novel genera, representing 31 known and 43 novel species. Functional analysis linked core MAGs to key WWTP processes: polyphosphate accumulation (9), glycogen accumulation (12), denitrification (62), and nitrification (1). These included four novel MAGs with glycogen-accumulating (3) and polyphosphate-accumulating (1) potential and 11 capable of nitrous oxide reduction, critical for mitigating greenhouse gas emissions. Ca. Phosphoribacter was the most abundant genus, highlighting its underestimated role caused by misclassification as Tetrasphaera in 16S rRNA surveys. Specifically, Ca. P. hodrii was the dominant species, exhibiting enhanced sugar uptake and amino acid synthesis as likely drivers of its enrichment in the AGS WWTPs. Overall, this study resolves for the first time the taxa and functional traits consistently enriched in full-scale AGS systems, enabling a shift from an empirical performance assessment toward biologically informed process interpretation.

Sewage↗

Metagenomic insights into microbial drivers of organic micropollutant removal in wastewater-impacted riverbank filtration.

Organic micropollutants (OMPs) in wastewater treatment plant (WWTP) effluent pose persistent risks to aquatic ecosystems and drinking water sources. Riverbank filtration (RBF) is a nature-based treatment process, yet the compartment-specific roles of riverbed sediment and downstream soil in OMP attenuation remain poorly resolved under wastewater-impacted conditions. Here, we combined targeted chemical analysis, OMP property compilation, shotgun metagenomics, EnviPath-based biotransformation annotation, and exploratory network analysis to investigate OMP attenuation in a laboratory-scale RBF system treating real WWTP effluent for 10 months. Nineteen OMPs were monitored along a sequential sediment-soil filtration pathway. Sediment preferentially attenuated hydrophilic or charged compounds, including lidocaine, amantadine, and sotalol, whereas soil contributed more strongly to the attenuation of naproxen, atenolol, and losartan. Metagenomic profiling revealed distinct microbial communities and functional gene repertoires between sediment and soil after long-term operation. Sediment harbored higher relative abundances of genes associated with oxidative xenobiotic transformation, including cytochrome P450-related enzymes, demethylases, dehydrogenases, oxidases, and aromatic compound degradation pathways. An exploratory Spearman network further identified associations among microbial genera, EnviPath-annotated candidate biotransformation genes, and OMP removal rates, including 17 KO-OMP links supported by both correlation and pathway annotation. These findings indicate that sediment and soil develop complementary microbial functional potentials that may support compound-specific OMP attenuation. This study provides a mechanistic basis for optimizing sediment-soil configurations in wastewater-impacted RBF systems and for improving nature-based barriers against diverse OMP mixtures.

Wastewater↗

Structure of microbial communities performing the simultaneous reduction of Fe(II)EDTA.NO2- and Fe(III)EDTA -.

BioDeNOx is a combined physicochemical and biological process for the removal of nitrogen oxides (NOx) from flue gas. In the present study, two anaerobic bioreactors performing BioDeNOx were run consecutively (RUN-1 and RUN-2) at a dilution rate of 0.01 h(-1) with Fe(II)EDTA.NO(2-) and Fe(III)EDTA(-) as electron acceptors and ethanol as electron donor. The measured protein concentration of the reactor biomass of both runs was 120 mg/l. Different molecular methods were used to determine the identity and abundance of the bacterial populations in both bioreactors. Bacillus azotoformans strain KT-1 was recognized as a key player in Fe(II)EDTA.NO(2-) reduction. PCR-denaturing gradient gel electrophoresis analysis of the reactor biomass showed a greater diversity in RUN-2 than in RUN-1. Enrichments of Fe(II)EDTA.NO(2-) and Fe(III)EDTA(-) reducers and activity assays were conducted using the biomass from RUN-2 as an inoculum. The results on substrate turnover, overall microbial diversity, and enrichments and finally activity assays confirmed that ethanol was used as electron donor for Fe(II)EDTA.NO(2-) reduction. In addition, the Fe(III)EDTA(-) reduction rate of the microbial community proved to be feasible enough to run the bioreactors, ruling out the chemical reduction of Fe(III)EDTA(-) with sulfide as was proposed by other researchers.

Anaerobiosis↗

Three-dimensional biofilm model with individual cells and continuum EPS matrix.

An innovative type of biofilm model is derived by combining an individual description of microbial particles with a continuum representation of the biofilm matrix. This hybrid model retains the advantages of each approach, while providing a more realistic description of the temporal development of biofilm structure in two or three spatial dimensions. The general model derivation takes into account any possible number of soluble components. These are substrates and metabolic products, which diffuse and react in the biofilm within individual microbial cells. The cells grow, divide, and produce extracellular polymeric substances (EPS) in a multispecies model setting. The EPS matrix is described by a continuum representation as incompressible viscous fluid, which can expand and retract due to generation and consumption processes. The cells move due to a pushing mechanism between cells in colonies and by an advective mechanism supported by the EPS dynamics. Detachment of both cells and EPS follows a continuum approach, whereas cells attach in discrete events. Two case studies are presented for model illustration. Biofilm consolidation is explained by shrinking due to EPS and cell degradation processes. This mechanism describes formation of a denser layer of cells in the biofilm depth and occurrence of an irregularly shaped biofilm surface under nutrient limiting conditions. Micro-colony formation is investigated by growth of autotrophic microbial colonies in an EPS matrix produced by heterotrophic cells. Size and shape of colonies of ammonia and nitrite-oxidizing bacteria (NOB) are comparatively studied in a standard biofilm and in biofilms aerated from a membrane side.

Biofilms↗

Continuity-based model interfacing for plant-wide simulation: a general approach.

In plant-wide simulation studies of wastewater treatment facilities, often existing models from different origin need to be coupled. However, as these submodels are likely to contain different state variables, their coupling is not straightforward. The continuity-based interfacing method (CBIM) provides a general framework to construct model interfaces for models of wastewater systems, taking into account conservation principles. In this contribution, the CBIM approach is applied to study the effect of sludge digestion reject water treatment with a SHARON-Anammox process on a plant-wide scale. Separate models were available for the SHARON process and for the Anammox process. The Benchmark simulation model no. 2 (BSM2) is used to simulate the behaviour of the complete WWTP including sludge digestion. The CBIM approach is followed to develop three different model interfaces. At the same time, the generally applicable CBIM approach was further refined and particular issues when coupling models in which pH is considered as a state variable, are pointed out.

Algorithms↗

Modeling the utilization of starch by activated sludge for simultaneous substrate storage and microbial growth.

This paper presents a mechanistic model incorporating microbial growth on external substrate with simultaneous formation of storage biopolymers (activated sludge model for growth and storage-ASMGS) for the utilization of starch by activated sludge. Model description and calibration utilized experimental data of an SBR fed with particulate native potato starch (NPS) and soluble starch (SolS) selected as model substrates. The fate of starch was monitored in a cycle together with glycogen and oxygen uptake rate (OUR) profiles. In the experiments, glycogen formation was significantly lower than predicted by total conversion of starch to glycogen, justifying the need to account for primary growth on starch. The proposed model basically modified Activated Sludge Model No.3 (ASM3), to include adsorption of starch, its hydrolysis and simultaneous growth and glycogen formation using the hydrolysis products, which was mainly maltose. Model simulations indicated hydrolysis of the adsorbed starch as the rate limiting process. The proposed model calibrated well the fate of all major model components, namely, starch, glycogen, and OUR. Particulate NPS and SolS were hydrolyzed with similar rates; however, primary and secondary growth processes on SolS were more efficient, with higher yields, due to the more easily utilizable products of SolS, both in terms of extracellular hydrolysis and of stored poly-glucose. Modeling with ASM3, assuming starch as either readily or slowly biodegradable, did not provide an equally acceptable fit for the glycogen and OUR curves; supporting the need to consider primary growth together with storage as defined in the proposed model.

Bioreactors↗

Experimental evaluation of starch utilization mechanism by activated sludge.

The study aimed to explore the conversion processes of hydrolysable substrates by activated sludge. Experimental data were collected from a sequencing batch reactor (SBR) and from batch tests using activated sludge acclimated to native potato starch (NPS). Parallel batch tests were run with NPS (particulate), soluble starch (SolS), maltose, and glucose for comparative evaluation. The fate of organic carbon in the reactor was followed directly by measuring substrate, poly-glucose, and oxygen uptake rate. Results indicated that adsorption was the dominant mechanism for starch removal with subsequent enzymatic hydrolysis inside the flocs. The role of bulk liquid enzyme activity was minimal. Starch was observed to hydrolyze to maltose rather than glucose. The behavior of NPS and SolS was quite similar to maltose in terms of poly-glucose formation and oxygen uptake. Since the simplest hydrolysis product was maltose, the biomass was not acclimated to glucose and thus, glucose exhibited a significantly different removal and storage pattern. The study also showed that differentiation of readily biodegradable and slowly biodegradable COD should better be based on the kinetics of their utilization rather than simple physical characterization.

Bioreactors↗

Modeling product formation in anaerobic mixed culture fermentations.

The anaerobic conversion of organic matter to fermentation products is an important biotechnological process. The prediction of the fermentation products is until now a complicated issue for mixed cultures. A modeling approach is presented here as an effort to develop a methodology for modeling fermentative mixed culture systems. To illustrate this methodology, a steady-state metabolic model was developed for prediction of product formation in mixed culture fermentations as a function of the environmental conditions. The model predicts product formation from glucose as a function of the hydrogen partial pressure (P(H2)), reactor pH, and substrate concentration. The model treats the mixed culture as a single virtual microorganism catalyzing the most common fermentative pathways, producing ethanol, acetate, propionate, butyrate, lactate, hydrogen, carbon dioxide, and biomass. The product spectrum is obtained by maximizing the biomass growth yield which is limited by catabolic energy production. The optimization is constrained by mass balances and thermodynamics of the bioreactions involved. Energetic implications of concentration gradients across the cytoplasmic membrane are considered and transport processes are associated with metabolic energy exchange to model the pH effect. Preliminary results confirmed qualitatively the anticipated behavior of the system at variable pH and P(H2) values. A shift from acetate to butyrate as main product when either P(H2) increases and/or pH decreases is predicted as well as ethanol formation at lower pH values. Future work aims at extension of the model and structural validation with experimental data.

Adenosine Triphosphate↗

A general description of detachment for multidimensional modelling of biofilms.

A general method for describing biomass detachment in multidimensional biofilm modelling is introduced. Biomass losses from processes acting on the entire surface of the biofilm, such as erosion, are modelled using a continuous detachment speed function F(det). Discrete detachment events, i.e. sloughing, are implicitly derived from simulations. The method is flexible to allow F(det) to take several forms, including expressions dependent on any state variables such as the local biofilm density. This methodology for biomass detachment was integrated with multidimensional (2D and 3D) particle-based multispecies biofilm models by using a novel application of the level set method. Application of the method is illustrated by trends in the dynamics of biofilms structure and activity derived from simulations performed on a simple model considering uniform biomass (case study I) and a model discriminating biomass composition in heterotrophic active mass, extracellular polymeric substances (EPS) and inert mass (case study II). Results from case study I demonstrate the effect of applied detachment forces as a fundamental factor influencing steady-state biofilm activity and structure. Trends from experimental observations reported in literature were correctly described. For example, simulation results indicated that biomass sloughing is reduced when erosion forces are increased. Case study II illustrates the application of the detachment methodology to systems with non-uniform biomass composition. Simulations carried out at different bulk concentrations of substrate show changes in biofilm structure (in terms of shape, density and spatial distribution of biomass components) and activity (in terms of oxygen and substrate consumption) as a consequence of either oxygen-limited or substrate-limited growth.

Bacterial Adhesion↗

Biofilm-control strategies based on enzymic disruption of the extracellular polymeric substance matrix--a modelling study.

A kinetic model is proposed to assess the feasibility of strategies for the removal of biofilms by using substances that induce detachment by affecting the cohesiveness of the matrix of extracellular polymeric substances (EPSs). The model uses a two-state description of the EPS (natural EPS and compromised EPS) to provide a unified representation of diverse mechanisms of action of detachment-promoting agents (DPAs), which include enzymes that degrade the EPS and other agents described in the literature. A biofilm-cohesiveness factor describes local increases in detachment rates resultant from losses in cohesive strength. The kinetic model was implemented in an individual-based biofilm-modelling framework, including detachment rates dependent on local cohesiveness. The efficacy of treatments with DPAs was assessed by three-dimensional model simulations. Changes in treatment efficacy were evaluated quantitatively by using a Thiele modulus, which quantifies the relationship between diffusion of the DPA through the biofilm matrix and DPA decay rate, and a Damköhler number relating the rate of EPS reaction with a DPA and the rate of EPS production by the micro-organisms in the biofilm. This study demonstrates the feasibility and limits of implementing biofilm-control strategies based on attacking the EPS.

Bacterial Adhesion↗

A framework for multidimensional modelling of activity and structure of multispecies biofilms.

Concepts from previous biofilm models were integrated to create a framework for the implementation of multidimensional (2D and 3D) multispecies biofilm models. The framework is here described at three levels: (i) mathematical representation of the processes involved in biofilm formation, (ii) numerical implementation into a computer program (freely available from our website http://www.biofilms.bt.tudelft.nl/frameworkMaterial) and (iii) using the program for the creation of biofilm models with multiple bacterial and solute species. An improved version of the individual-based modelling (IbM) that allows structured biomass was used. In this approach biomass composition may be discriminated into any number of particulate species, including extracellular polymeric substances (EPS) for which specific functionality was included. Detachment is also included, described as occurring at the biofilm surface with variable local rates derived from functions of state variables. The application of this modelling framework to a multispecies system with structured biomass is illustrated in a case study where the competition between an organism capable of accumulating polyhydroxybutyrate (PHB, an internal storage compound) and an EPS-producing organism in a two-species biofilm is analysed. Results illustrate that biofilms enriched in PHB-producing organisms may be obtained by supplying substrate intermittently in feast/famine cycles.

Bacteria↗

Characterization of microbial communities removing nitrogen oxides from flue gas: the BioDeNOx process.

BioDeNOx is an integrated physicochemical and biological process for the removal of nitrogen oxides (NOx) from flue gases. In this process, the flue gas is purged through a scrubber containing a solution of Fe(II)EDTA2-, which binds the NOx to form an Fe(II)EDTA.NO2- complex. Subsequently, this complex is reduced in the bioreactor to dinitrogen by microbial denitrification. Fe(II)EDTA2-, which is oxidized to Fe(III)EDTA- by oxygen in the flue gas, is regenerated by microbial iron reduction. In this study, the microbial communities of both lab- and pilot-scale reactors were studied using culture-dependent and -independent approaches. A pure bacterial strain, KT-1, closely affiliated by 16S rRNA analysis to the gram-positive denitrifying bacterium Bacillus azotoformans, was obtained. DNA-DNA homology of the isolate with the type strain was 89%, indicating that strain KT-1 belongs to the species B. azotoformans. Strain KT-1 reduces Fe(II)EDTA.NO2- complex to N2 using ethanol, acetate, and Fe(II)EDTA2- as electron donors. It does not reduce Fe(III)EDTA-. Denaturing gradient gel electrophoresis analysis of PCR-amplified 16S rRNA gene fragments showed the presence of bacteria closely affiliated with members of the phylum Deferribacteres, an Fe(III)-reducing group of bacteria. Fluorescent in situ hybridization with oligonucleotide probes designed for strain KT-1 and members of the phylum Deferribacteres showed that the latter were more dominant in both reactors.

Bacillus↗

Bulking sludge in biological nutrient removal systems.

Bulking sludge problems are commonly reported in biological nutrient removal (BNR) systems. This has led to the general belief that intrinsic BNR conditions favor the growth of undesirable and excessive filamentous bacteria. The present study shows that other factors have a major role in bulking, and not the BNR conditions. These factors have been verified in well-controlled, strictly anoxic-aerobic and strictly anaerobic-aerobic sequencing batch reactor systems. The experimental results show that conditions known to be responsible for bulking sludge in aerobic systems (i.e., low concentration of electron donor and/or electron acceptor) did not lead to bulking. Even when acetate was present at very low concentrations in the aerobic stage of an anaerobic-aerobic bio-P system, the sludge settleability remained very good. This clearly demonstrates that good bio-P activity can stabilize and improve sludge settleability. The presence of microaerophilic conditions in the anoxic stage of the anoxic-aerobic system was the only factor leading to worsening sludge settling characteristics. The results are discussed in light of our previous hypothesis about the importance of diffusion-limited substrate uptake for the development of filamentous structures in biological flocs. The hypothesis is extended to anaerobic-aerobic and anoxic-aerobic conditions, typical of BNR-activated sludge systems. Taking into account the effect of feeding patterns on biochemical rates and on the development of filamentous bacterial structures, we recommend the adoption of plug-flow selector configurations, with strictly anaerobic and/or strictly anoxic conditions, wherein microaerophilic conditions are excluded, in order to maintain reliable and robust BNR performance.

Acetates↗

Filamentous bulking sludge--a critical review.

This paper reviews the long-standing bulking sludge problem in activated sludge systems. Despite the extensive amount of research that has been done on bulking sludge, it still occurs world-wide and a comprehensive solution does not seem to be available. Bulking sludge can be approached as a microbiological problem (occurrence of a specific filamentous bacterium) or as an engineering problem (growth of bacteria with a filamentous morphology). In the first case species-specific solutions should be found, whereas in the latter case, a generic approach might be available. Since bulking sludge is caused by a group of bacteria with a specific morphology, but not a specific physiology we believe that a generic approach would be feasible. Several theories for bulking sludge are discussed. Based on these theories the application and associated problems with the use of biological selectors are critically evaluated. Finally, a set of open research questions is identified.

Bacteria↗

Metabolic model for glycogen-accumulating organisms in anaerobic/aerobic activated sludge systems.

Glycogen-accumulating organisms (GAO) have the potential to directly compete with polyphosphate-accumulating organisms (PAO) in EBPR systems as both are able to take up VFA anaerobically and grow on the intracellular storage products aerobically. Under anaerobic conditions GAO hydrolyse glycogen to gain energy and reducing equivalents to take up VFA and to synthesise polyhydroxyalkanoate (PHA). In the subsequent aerobic stage, PHA is being oxidised to gain energy for glycogen replenishment (from PHA) and for cell growth. This article describes a complete anaerobic and aerobic model for GAO based on the understanding of their metabolic pathways. The anaerobic model has been developed and reported previously, while the aerobic metabolic model was developed in this study. It is based on the assumption that acetyl-CoA and propionyl-CoA go through the catabolic and anabolic processes independently. Experimental validation shows that the integrated model can predict the anaerobic and aerobic results very well. It was found in this study that at pH 7 the maximum acetate uptake rate of GAO was slower than that reported for PAO in the anaerobic stage. On the other hand, the net biomass production per C-mol acetate added is about 9% higher for GAO than for PAO. This would indicate that PAO and GAO each have certain competitive advantages during different parts of the anaerobic/aerobic process cycle.

Acyl Coenzyme A↗

Effect of feeding pattern and storage on the sludge settleability under aerobic conditions.

The selection of filamentous bacteria is often assumed to be associated with specific microbial properties such as growth rate, substrate uptake rate, substrate affinity and potential for substrate storage. In this study we aimed to verify some of these factors. Sequencing batch reactor (SBR) systems were used to scale-down aerobic activated sludge systems with an aerobic selector. Adding acetate in different aerobic feeding periods allowed us to simulate a variable relative size of aerobic selector with different bulk liquid substrate concentrations. The experiments showed that as expected, the aerobic fill time ratio (FTR(ox)) and the corresponding feast period, which can be assumed similar to contact time in an aerobic selector, had a strong effect on the sludge settleability. Promoting a strong substrate gradient in the SBR (FTR(ox)<5.4%) resulted in good sludge settleability (SVI<120mLg(-1)). Whenever acetate was added in a limiting rate (FTR(ox)>6.2%), a condition in which the acetate concentration in the reactor was always very low, the sludge settleability decreased (SVI>150mLg(-1)). Sludge settleability could be improved by changing the feeding strategy to a pulse feed. The maximum specific acetate uptake rate and poly beta-hydroxybutyrate (PHB) production rate of bad settling sludge, including bulking sludge, was similar to well-settling sludge, which is not in accordance with the general assumptions that well settling sludge have a higher maximal substrate uptake rate and better storage capacities. An alternative hypothesis for the development of filamentous structures in biological flocs has been formulated. It is hypothesized that bulking sludge originates from the presence of substrate gradients in sludge aggregates. Whereas at low bulk liquid substrate concentration filamentous bacteria give easier access to the substrate at the outside of the flocs and thereby proliferate, at high bulk liquid substrate concentration there is no substrate advantage for filamentous organisms and smooth bacterial structures predominate. In this hypothesis there is no need for an intrinsic difference in kinetic parameters between floc and filamentous bacteria. Where presence of filamentous bacteria is related to process conditions, the presence of a specific filament is likely due to presence of a specific limiting substrate.

Bacteria, Aerobic↗

Sensitivity analysis of a biofilm model describing a one-stage completely autotrophic nitrogen removal (CANON) process.

A mathematical model for nitrification and anaerobic ammonium oxidation (ANAMMOX) processes in a single biofilm reactor (CANON) was developed. This model describes completely autotrophic conversion of ammonium to dinitrogen gas. Aerobic ammonium and nitrite oxidation were modeled together with ANAMMOX. The sensitivity of kinetic constants and biofilm and process parameters to the process performance was evaluated, and the total effluent concentrations were, in general, found to be insensitive to affinity constants. Increasing the amount of biomass by either increasing biofilm thickness and density or decreasing porosity had no significant influence on the total effluent concentrations, provided that a minimum total biomass was present in the reactor. The ANAMMOX process always occurred in the depth of the biofilm provided that the oxygen concentration was limiting. The optimal dissolved oxygen concentration level at which the maximum nitrogen removal occurred is related to a certain ammonium surface load on the biofilm. An ammonium surface load of 2 g N/m2. d, associated with a dissolved oxygen concentration level of 1.3 g O2/m3 in the bulk liquid and with a minimum biofilm depth of 1 mm seems a proper design condition for the one-stage ammonium removal process. Under this condition, the ammonium removal efficiency is 94% (82% for the total nitrogen removal efficiency) (30 degrees C). Better ammonium removal could be achieved with an increase in the dissolved oxygen concentration level, but this would strongly limit the ANAMMOX process and decrease total nitrogen removal. It can be concluded that a one-stage process is probably not optimal if a good nitrogen effluent is required. A two-stage process like the combined SHARON and ANAMMOX process would be advised for complete nitrogen removal.

Anaerobiosis↗