Search PubMed⌕ Search

Biomedical subjects

Marilyn M Olmstead

Publications and source records attributed to Marilyn M Olmstead.

At least 19 recordsLinked to original sources
PubMed2006

Stoichiometric and catalytic secondary O-atom transfer by Fe(III)-NO2 complexes derived from a planar tetradentate non-heme ligand: reminiscence of heme chemistry.

An Fe(III) nitro complex [(bpb)Fe(NO2)(py)] (2) of the tetradentate ligand 1,2-bis(pyridine-2-carboxamido)benzene (H2bpb, H is the dissociable amide proton) has been synthesized via addition of NaNO2 to [(bpb)Fe(py)2](ClO4) (1) in MeCN or DMF. This structurally characterized Fe(III) nitro complex exhibits its nuNO2 at 1384 cm(-1). The reaction of 1 with 2 equiv of Et4NX (X = Cl-, Br-) affords the high-spin complexes (Et4N)[(bpb)Fe(Cl2)] (3) and (Et4N)[(bpb)Fe(Br)2] (4), respectively. The structure of 4 has been determined. The addition of an equimolar amount of Et4NCl, Et4NBr, or Et4NCN to a solution of 2 affords the mixed-ligand complexes (Et4N)[(bpb)Fe(NO2)(Cl)] (5), (Et4N)[(bpb)Fe(NO2)(Br)] (6), and (Et4N)[(bpb)Fe(NO2)(CN)] (7), respectively. These complexes are all low spin with isotropic g values of 2.15. Under anaerobic conditions, the reactions of 5-7 with Ph3P in MeCN afford the five-coordinate {Fe-NO}7 nitrosyl [(bpb)Fe(NO)] (and Ph3PO) via secondary oxygen-atom (O-atom) transfer. The O-atom transfer to Ph3P by 5-7 becomes catalytic in the presence of dioxygen with transfer rates in the range of 1.70-13.59 x 10-3 min(-1). The O-atom transfer rates and turnover numbers (5 > 6 > 7) are reflective of the strength of the axial donors (Cl- > Br- > CN-). The catalytic efficiencies of complexes 5-7 are limited due to formation of the thermodynamic end products [(bpb)Fe(X)2]- (where X = Cl- for 5, Br- for 6, and CN- for 7).

Benzene↗
PubMed2006

Substituent effects in five oxo-centered trinuclear rhodium(III) clusters.

We here report the rates of water substitution by methanol-d(4) for four new oxo-centered trinuclear rhodium(III) clusters with different carboxylate-bridging ligands, [Rh3(mu3-O)(mu-O2CR)6(OH2)3]+ (R = CH2CH3, CH2CH2Cl, CH2Cl, and CHCl2), and [Rh3(mu3-O)(mu-O2CCH3)6(OH2)3]+. By varying the R group alkyl chain, water substitution rates were found to span almost 3 orders of magnitude (k(298K) = 1.2 x 10(-2)-2.3 x 10(-5) s(-1)) and reflect the following trend R = CH2CH3 > CH3 > CH2CH2Cl > CH(2)Cl > CHCl2. Activation parameters for substitution point toward a dissociative activation pathway (DeltaH = 99-115 kJ mol(-1); DeltaS = 48-52 J mol(-1) K(-1)), indicating that there is little association with the incoming methanol molecule during the formation of the transition-state complex. Because the mechanism for substitution in all five trimers has a considerable dissociative character, substitution rates are likely very similar to water exchange rates. These data suggest that the kinetic reactivity of the ligated waters is heavily influenced by the inductive ability of the aliphatic substituents, but yet the mechanism of substitution remains virtually unchanged. Structural data are also reported for the four new rhodium(III) trimer salts as well as 103Rh NMR spectra. We find that 103Rh NMR chemical shifts span more than 200 ppm and mirror the same reactivity trend found for the rates of water substitution (103Rh delta (9406-9620 ppm): R = CH2CH3 < CH3 < CH2CH2Cl < CH2Cl < CHCl2). Taken together, these data suggest a means for estimating water exchange rates for other oxo-centered rhodium(III) trimers from chemical shift data alone.

Journal Article↗
PubMed2006

Tb3N@C84: an improbable, egg-shaped endohedral fullerene that violates the isolated pentagon rule.

The structure of isomer 2 of Tb3N@C84 has been determined through single-crystal X-ray diffraction on Tb3N@C84.NiII(OEP).2(C6H6). The carbon cage has a distinct egg shape due to the presence of a single pair of fused pentagons at one apex of the molecule. Thus, although 24 IPR structures are available to the C84 cage, Nature utilizes one of the 51 568 isomeric structures that do not conform to the IPR for this unusual molecule. The Tb3N portion of isomer 2 of Tb3N@C84 is strictly planar. One Tb atom is nestled within the fold of the fused pentagons, while the other Tb atoms are disordered over four pairs of sites.

Catalysis↗
PubMed2006

Simplified cyclic analogues of bastadin-5. Structure-activity relationships for modulation of the RyR1/FKBP12 Ca2+ channel complex.

Bastadin-5, a brominated macro-dilactam from the marine sponge Ianthella basta, enhances release of Ca2+ from stores within the sarcoplasmic reticulum (SR) of muscle and nonmuscle cells by modulating RyR1/FKBP12 complex. Analogues of bastadin-5 present desirable targets for SAR studies to shed light on the gating mechanism and locus of bastadin-5 binding on these heteromeric channels that mediate essential steps in early coupling of membrane excitation to Ca2+ signaling cascades. Simple, ring-constrained analogues of bastadin-5 were synthesized from substituted benzaldehydes in a convergent manner, featuring an efficient S(N)Ar macroetherification, and evaluated in an assay that measures [3H]-ryanodine that is known to correlate with the functional open state of the Ca2+ channel. The simplified 14-membered ring, atropisomeric analogue (+/-)-7, like bastadin-5, enhanced ryanodine binding to the RyR1/FKBP12 complex (EC50 11 microM), however, unexpectedly, the corresponding achiral 18-membered ring analogue 14 potently inhibited binding (IC50 6 microM) under the same conditions. Structure-activity relationships of both families of cyclic analogues showed activity in a ryanodine binding assay that varied with substitutions of the Br atom on the trisubstituted aryl ring by various functional groups. The most active analogues were those that conserved the dibromocatechol ether moiety that corresponds to the 'western edge' of the bastadin-5 structure. These data suggest that cyclic analogues of bastadin-5 interact with the channel complex in a complex manner that can either enhance or inhibit channel activity.

Animals↗
PubMed2006

Electron distribution in iron octaethyloxophlorin complexes. Importance of the Fe(III) oxophlorin trianion form in the bis-pyridine and bis-imidazole complexes.

The apportionment of electrons between iron and the porphyrinic macrocycle in complexes of octaethyloxophlorin (H3OEPO) has been a vexing problem. In particular, for (Py)2Fe(OEPO), which is an important intermediate in heme degradation, three resonance structures involving Fe(III), Fe(II), or Fe(I), respectively, have been considered. To clarify this matter, the electronic and geometric structures of (Py)2Fe(III)(OEPO), (Im)2Fe(III)(OEPO).2THF, and (Im)2Fe(III)(OEPO).1.6CHCl3 have been examined by single-crystal X-ray diffraction, measurement of magnetic moments as a function of temperature, and EPR and NMR spectral studies. The results clearly show that both complexes exist in the Fe(III)/oxophlorin trianion form rather than the Fe(II)/oxophlorin radical form previously established for (2,6-xylylNC)(2)Fe(II)(OEPO.). In the solid state from 10 to 300 K, (Py)2Fe(III)(OEPO) exists in the high-spin (S = 5/2) state with the axial ligands in parallel planes, a planar porphyrin, and long axial Fe-N distances. However, in solution it exists predominantly in a low-spin (S = 1/2) form. In contrast, the structures of (Im)2Fe(III)(OEPO).2THF and (Im)2Fe(III)(OEPO).1.6CHCl3 consist of porphyrins with a severe ruffled distortion, axial ligands in nearly perpendicular planes, and relatively short axial Fe-N distances. The crystallographic, magnetic, EPR, and NMR results all indicate that (Im)2Fe(III)(OEPO) exists in the low-spin Fe(III) form in both the solid state and in solution.

Anions↗
PubMed2006

Preparation and structure of CeSc2N@C80: an icosahedral carbon cage enclosing an acentric CeSc2N unit with buried f electron spin.

Herein, we report the preparation, purification, and characterization of a mixed trimetallic nitride endohedral metallofullerene, CeSc(2)N@C(80). Single-crystal X-ray diffraction shows that CeSc(2)N@C(80) consists of a four-atom asymmetric top (CeSc(2)N) inside a C(80) (I(h)()) carbon cage. Unlike the situation in most endohedrals of the M(3)N@C(2)(n)() type, the nitride ion is not located at the center of the carbon cage but is offset by 0.36 A in order to accommodate the large Ce(III) ion. The cage carbon atoms near the endohedral Ce and Sc atoms exhibit significantly larger pyramidal angles than the other carbon atoms on the C(80) cage. Surprisingly, at ambient temperature, the (13)C NMR spectrum exhibits isotropic motional averaging yielding only two signals (3 to 1 intensity ratio) for the icosahedral C(80) cage carbons. At the same temperature, the (45)Sc NMR exhibits a relatively narrow, symmetric signal (2700 Hz) with a small temperature-dependent Curie shift. A rotation energy barrier (E(a) = 79 meV) was derived from the (45)Sc NMR line-width analysis. Finally, the XPS spectrum for CeSc(2)N@C(80) confirms a +3 oxidation state for cerium, Ce(3+)(4f(1)5d(0)). This oxidation state and the Curie shift are consistent with a weakly paramagnetic system with a single buried f electron spin.

Cerium↗
PubMed2006

Structure and enhanced reactivity rates of the D5h Sc3N@C80 and Lu3N@C80 metallofullerene isomers: the importance of the pyracylene motif.

In this paper we report enhanced reactivity of the D(5h) isomers in comparison with the more common I(h) isomers of Sc(3)N@C(80) and Lu(3)N@C(80) toward Diels-Alder and 1,3-dipolar tritylazomethine ylide cycloaddition reactions. Also, the structure of the D(5h) isomer of Sc(3)N@C(80) has been determined through single-crystal X-ray diffraction on D(5h)-Sc(3)N@C(80).Ni(OEP).2benzene (OEP = octaethylporphyrin). The Sc(3)N portion of D(5h)-Sc(3)N@C(80) is strictly planar, but the plane of these four atoms is tipped out of the noncrystallographic, horizontal mirror plane of the fullerene by 30 degrees . The combination of short bond length and high degree of pyramidization for the central carbon atoms of the pyracylene sites situated along a belt that is perpendicular to the C(5) axis suggests that these are the sites of greatest reactivity in the D(5h) isomer of Sc(3)N@C(80). Consistent with the observation of higher reactivity observed for the D(5h) isomers, cyclic voltammetry and molecular orbital (MO) calculations demonstrate that the D(5h) isomers have slightly smaller energy gaps than those of the I(h) isomers. The first mono- and bis-adducts of D(5h) Sc(3)N@C(80) have been synthesized via 1,3-dipolar cycloaddition of tritylazomethine ylide. The NMR spectrum for the monoadduct 2b is consistent with reaction at the 6,6-ring juncture in the pyracylene unit of the D(5h) Sc(3)N@C(80) cage and is the thermodynamically stable isomer. On the other hand, monoadduct 2a undergoes thermal conversion to other isomeric monoadducts, and three possible structures are proposed.

Computer Simulation↗
PubMed2006

Three chiral vinyldioxazaborocanes.

The structures of three chiral vinyldioxazaborocanes are reported, namely (2E)- and (2Z)-6-benzyl-2-buten-2-yl-1,3,6,2-dioxazaborocane, C27H30BNO2, (II) and (III), respectively, and (2Z)-2-buten-2-yl-6-isobutyl-1,3,6,2-dioxazaborocane, C24H32BNO2, (IV). These compounds may be useful in asymmetric reactions. In the structures reported here, the N-B donor-acceptor bond is longer than in any previously reported analogous compounds.

Journal Article↗
PubMed2006

A pirouette on a metallofullerene sphere: interconversion of isomers of N-tritylpyrrolidino I(h) Sc3N@C80.

The pure I(h) isomer of Sc3N@C80 was allowed to react with N-triphenylmethyl-5-oxazolidinone via the corresponding azomethine ylide. The reaction results in the formation of two monoadducts; one (1b) is the kinetic product, and the other (1a) is thermodynamically more stable. Small amounts of the bisadducts were also formed. The structure of the thermodynamic monoadduct 1a was shown conclusively by NMR spectroscopy and X-ray crystallography to result from addition across the 5,6-ring junction. The kinetic product 1b was demonstrated to be the 6,6-ring juncture adduct on the basis of NMR experiments and X-ray crystallography. In refluxing chlorobenzene pure 1b was converted to the more thermodynamically stable 1a isomer. These N-tritylpyrrolidino derivatives are potentially useful precursor compounds for further derivatization for various applications.

Journal Article↗
PubMed2006

Synthesis, structure, and properties of an Fe(II) carbonyl [(PaPy3)Fe(CO)](ClO4): insight into the reactivity of Fe(II)-CO and Fe(II)-NO moieties in non-heme iron chelates of N-donor ligands.

An Fe(II) carbonyl complex [(PaPy3)Fe(CO)](ClO4) (1) of the pentadentate ligand N,N-bis(2-pyridylmethyl)amine-N-ethyl-2-pyridine-2-carboxamide (PaPy3H, H is the dissociable amide proton) has been synthesized and structurally characterized. This Fe(II) carbonyl exhibits its nu(CO) at 1972 cm(-1), and its 1H NMR spectrum in degassed CD3CN confirms its S = 0 ground state. The bound CO in 1 is not photolabile. Reaction of 1 with an equimolar amount of NO results in the formation of the {Fe-NO}7 nitrosyl [(PaPy3)Fe(NO)](ClO4) (2), while excess NO affords the iron(III) nitro complex [(PaPy3)Fe(NO2)](ClO4) (5). In the presence of [Fe(Cp)2]+ and excess NO, 1 forms the {Fe-NO}6 nitrosyl [(PaPy3)Fe(NO)](ClO4)2 (3). Complex 1 also reacts with dioxygen to afford the iron(III) mu-oxo species [{(PaPy3)Fe}2O](ClO4)2 (4). Comparison of the metric and spectral parameters of 1 with those of the previously reported {Fe-NO}6,7 nitrosyls 3 and 2 provides insight into the electronic distributions in the Fe(II)-CO, Fe(II)-NO, and Fe(II)-NO+ bonds in the isostructural series of complexes 1-3 derived from a non-heme polypyridine ligand with one carboxamide group.

Carbon Monoxide↗
PubMed2006

Synthetic analogues of the active site of the A-cluster of acetyl coenzyme A synthase/CO dehydrogenase: syntheses, structures, and reactions with CO.

Two metallosynthons, namely (Et4N)2[Ni(NpPepS)] (1) and (Et4N)2[Ni(PhPepS)] (2) containing carboxamido-N and thiolato-S as donors have been used to model the bimetallic M(p)-Ni(d) subsite of the A-cluster of the enzyme acetyl coenzyme A synthase/CO dehydrogenase. A series of sulfur-bridged Ni/Cu dinuclear and trinuclear complexes (3-10) have been synthesized to explore their redox properties and affinity of the metal centers toward CO. The structures of (Et4N)2[Ni(PhPepS)] (2), (Et4N)[Cu(neo)Ni(NpPepS)] x 0.5 Et2O x 0.5 H2O (3 x 0.5 Et2O x 0.5 H2O), (Et4N)[Cu(neo)Ni(PhPepS)] x H2O (4 x H2O), (Et4N)2[Ni{Ni(NpPepS)}2] x DMF (5 x DMF), (Et4N)2[Ni(DMF)2{Ni(NpPepS)}2] x 3 DMF (6 x 3 DMF), (Et4N)2[Ni(DMF)2{Ni(PhPepS)}2] (8), and [Ni(dppe)Ni(PhPepS)] x CH2Cl2 (10 x CH2Cl2) have been determined by crystallography. The Ni(d) mimics 1 and 2 resist reduction and exhibit no affinity toward CO. In contrast, the sulfur-bridged Ni center (designated Ni(C)) in the trinuclear models 5-8 are amenable to reduction and binds CO in the Ni(I) state. Also, the sulfur-bridged Ni(C) center can be removed from the trimers (5-8) by treatment with 1,10-phenanthroline much like the "labile Ni" from the enzyme. The dinuclear Ni-Ni models 9 and 10 resemble the Ni(p)-Ni(d) subsite of the A-cluster more closely, and only the modeled Ni(p) site of the dimers can be reduced. The Ni(I)-Ni(II) species display EPR spectra typical of a Ni(I) center in distorted trigonal bipyramidal and distorted tetrahedral geometries for 9(red) and 10(red), respectively. Both species bind CO, and the CO-adducts 9(red)-CO and 10(red)-CO display strong nu(co) at 2044 and 1997 cm(-1), respectively. The reduction of 10 is reversible. The CO-affinity of 10 in the reduced state and the nu(co) value of 10(red)-CO closely resemble the CO-bound reduced A-cluster (nu(co) = 1996 cm(-1)).

Acetate-CoA Ligase↗
PubMed2006

Metal-metal interactions in thallium(I)/platinum(II) compounds involving a chelating dicarbene and various auxiliary ligands.

Reaction of Tl(I)NO(3) and (C(4)H(10)N(4))Pt(II)(mnt) or (C(4)H(10)N(4))Pt(II)(dmg-H) [mnt = maleonitriledithiolate, dmg-H = dimethylglyoximate dianion] in dilute, aqueous KOH yielded adducts of Tl(I) and the conjugate bases of the platinum(II) compounds. The compound Tl(I)[(C(4)H(9)N(4))Pt(II)(dmg-H)].5H(2)O forms as dimers with close Tl(I)...Pt(II) separations of 3.0843(5) A, while Tl(I)[(C(4)H(9)N(4))Pt(II)(mnt)] has much longer Tl(I)...Pt(II) separations of 3.4400(2) A and forms loosely associated, helical coordination polymers. The new compounds are compared with the red and yellow polymorphs of Tl(I)[(C(4)H(9)N(4))Pt(II)(CN)(2)], and the influences of crystal packing forces, Coulombic interactions, and hydrogen bonding on supramolecular structures and Tl(I)...Pt(II) separations are discussed.

Journal Article↗
PubMed2005

Reactions of the heavier group 14 element alkyne analogues Ar'EEAr' (Ar' = C6H3-2,6(C6H3-2,6-Pri2)2; E = Ge, Sn) with unsaturated molecules: probing the character of the EE multiple bonds.

Reactions of the alkyne analogues Ar'EEAr' (Ar' = C6H3-2,6(C6H3-2,6-Pr(i)2)2; E = Ge (1); Sn (2)) with unsaturated molecules are described. Reaction of 1 and 2 with azobenzene afforded the new hydrazine derivatives Ar'E{(Ph)NN(Ph)}EAr' (E = Ge (3); Sn (4)). Treatment of 1 with Me3SiN3 gave the cyclic singlet diradicaloid Ar'Ge{mu2-(NSiMe3)}2GeAr' (5), whereas 2 afforded the monoimide bridged Ar'Sn{mu2-N(SiMe3)}SnAr' (6). Reaction of 1 with t-BuNC or PhCN yielded the adduct Ar'GeGe(CNBu(t))Ar' (7) or the ring compound (8). In contrast, the tin compound 2 did not react with either t-BuNC or PhCN. Treatment of 1 with N2CH(SiMe3) generated Ar'Ge{mu2-CH(SiMe3)}{mu2:eta2-N2CH(SiMe3)}{mu2-N2CH(SiMe3)}GeAr' (9) which contains ligands in three different bridging modes and no Ge-Ge bonding. Reaction of 1 with an excess of N(2)O gave a germanium peroxo species Ar'(HO)Ge(mu2-O)(mu2:eta2-O2)Ge(OH)Ar' (10) which features a ring. Oxidation of 1 by tetracyanoethylene (TCNE) led to cleavage of the Ge-Ge bond and formation of a large multiring system of formula Ar'Ge3+{(TCNE)2-}3{(GeAr')+}3. The digermyne 1 also reacted with 1 equiv of PhCPh to give the 1,2-digermacyclobutadiene 12, which has a ring, and with Me(3)SiCCH or PhCC-CCPh to activate a flanking C6H3-2,6-Pr(i)2 ring and give the tricyclic products 13 and 14. The "distannyne" 2 did not react with these acetylenes. Overall, the experiments showed that 1 is highly reactive toward unsaturated molecules, whereas the corresponding tin congener 2 is much less reactive. A possible explanation of the reactivity differences in terms of the extent of the singlet diradical character of the Ge-Ge and Sn-Sn bonds is discussed.

Journal Article↗
PubMed2005

Copper(I) and -(II) complexes of neutral and deprotonated N-(2,6-diisopropylphenyl)-3-[bis(2-pyridylmethyl)amino]propanamide.

As part of a study of atom-transfer radical polymerization (ATRP) catalysts, four new copper(I) and -(II) compounds of a new monoanionic, tripodal tetradentate ligand, N-(2,6-diisopropylphenyl)-3-[bis(2-pyridylmethyl)amino]propanamide (DIPMAP), were prepared. Ligand synthesis followed from the addition-elimination reaction of 2,6-diisopropylaniline with acryloyl chloride and then a Lewis acid catalyzed Michael addition of bis(2-pyridylmethyl)amine to this product. The ligand was complexed to CuCl to yield monomeric Cu(DIPMAP)Cl featuring an intramolecular hydrogen bond between the free amide hydrogen and the coordinated chloride ligand. Deprotonation of the amide hydrogen in Cu(DIPMAP)Cl using n-BuLi led to the incorporation of LiCl in the resulting product, Li2Cu2(DIPMAP)2Cl2. This complex exhibited an unusual dimeric structure, with the amine nitrogens of one ligand coordinated to a lithium ion, the amide oxygen of the same ligand bridging between the lithium ions, and the amidate nitrogen of that ligand coordinated to a CuCl unit that has a structure analogous to dihalocuprate ions. Deprotonation of Cu(DIPMAP)Cl using KOtBu yielded an alkali-metal chloride free product, Cu2(DIPMAP)2, that also exhibited a dimeric structure in which the three amine nitrogens of one ligand were coordinated to one CuI ion and the amidate nitrogen of the same ligand was coordinated to the other CuI ion. Cu2(DIPMAP)2 was effective in abstracting halogen atoms from organic halides, but in the attempted ATRP of tert-butyl acrylate, molecular weight versus conversion behavior reminiscent of a redox-initiated polymerization was observed. DIPMAP was coordinated to CuBr2 to yield [Cu(DIPMAP)Br]Br with a square-pyramidal structure. The amide hydrogen in this complex could be deprotonated using KOtBu to form complex [DIPMAP]CuBr. Spectral characterization of complex confirmed deprotonation of the ligand and that it most likely had an axially distorted trigonal-bipyramidal structure, although crystals suitable for X-ray analysis could not be obtained. Solution oxidation of Cu2(DIPMAP)2 using CBr4 yielded a product, complex, whose spectral signatures did not match those of complex. The dimeric structure of Cu2(DIPMAP)2 might be a significant contributing factor to the slow rate of deactivation observed in atom-transfer reactions using Cu2(DIPMAP)2 as the catalyst.

Journal Article↗