Search PubMed⌕ Search

Biomedical subjects

Marc A Hillmyer

Publications and source records attributed to Marc A Hillmyer.

At least 19 recordsLinked to original sources
PubMed2006

Morphologies of multicompartment micelles formed by ABC miktoarm star terpolymers.

Several new multicompartment micellar structures have been identified by cryogenic transmission electron microscopy (cryoTEM) from the aqueous self-assembly of mu-[poly(ethylethylene)][poly(ethylene oxide)][poly(perfluoropropylene oxide)] (mu-EOF) miktoarm star terpolymers. This work extends our previous studies, in which it was found that, upon decreasing the length of the hydrophilic block (O), the resulting micelles evolved from "hamburger" micelles to segmented worms and ultimately to nanostructured bilayers and vesicles. In the terpolymers examined here segmented ribbons and bilayers were found at an intermediate composition between segmented worms and nanostructured bilayers, provided that the fluoropolymer (F) was the minority component in the micelle core. On the other hand, when the F block exceeded the chain length of the hydrocarbon block (E), the superhydrophobic F block imposed a "double frustration" on the self-assembly of the mu-EOF(2-9-5) terpolymer; while F prefers to minimize its interfacial contact with the O corona, it must occupy the majority of the micellar core. Therefore, a richer variety of multicompartment micelles, including well-defined segmented worms, raspberry-like micelles, and multicompartmentalized worms, were formed from one terpolymer, as revealed by cryoTEM. Despite the complexity and variety of the observed aggregate morphologies, a small number of common structural elements can be invoked to interpret the observed micelles and to relate a given structure to the terpolymer composition.

Journal Article↗
PubMed2006

Laterally nanostructured vesicles, polygonal bilayer sheets, and segmented wormlike micelles.

We report the formation of vesicles with a laterally nanostructured membrane by self-assembly of "miktoarm" star terpolymers, that is, macromolecules with three chemically distinct arms. The lateral structure consists of approximately hexagonally packed fluorocarbon channels with 4.1 nm radii, immersed in a continuous, two-dimensional hydrocarbon bilayer. We also show that the assembly of these vesicles proceeds via metastable polygonal, faceted bilayer sheets.

Colloids↗
PubMed2005

Simultaneous, segregated storage of two agents in a multicompartment micelle.

The simultaneous, segregated storage of two different chromophores in a multicompartment micelle, which is formed from self-assembly of (polyethylethylene)(polyethylene oxide)(polyperfluoropropylene oxide) mikto-arm star terpolymers in water, was investigated by spectrophotometry. The multicompartment micelles, with segregated micellar cores composed of fluorocarbon and hydrocarbon compartments, can simultaneously absorb two chemically different molecules. These two molecules were confined into their preferred compartments with high selectivity.

Micelles↗
PubMed2005

Comparison of structurally analogous Zn2, Co2, and Mg2 catalysts for the polymerization of cyclic esters.

Three dimetallic monoethoxide complexes supported by a binucleating phenoxide ligand, LM2Cl2OEt (M = Zn, Co, or Mg), were prepared and shown by X-ray crystallography to be structurally analogous. Comparative studies of their cyclic ester polymerization reactivity revealed different trends for reactions with epsilon-caprolactone and lactide, however, implicating complicated effects of metal ion variation in these polymerizations.

Journal Article↗
PubMed2005

Nanochannel array plastics with tailored surface chemistry.

The utilization of nanoporous substrates in applications such as selective ion transport, biomolecule separation, seeded templating, and catalysis necessitates the ability to efficiently control pore surface properties. We approached this task by preparing nanoporous polymer monoliths from ABC triblock copolymer precursors that assemble into a cylindrical morphology, where the A block constitutes matrix, C is the removable minor component, and B provides the functionality on the surface of the pores. Polystyrene-polydimethylacrylamide-polylactide (PS-PDMA-PLA) triblock copolymers were prepared by a combination of controlled ring-opening and free-radical polymerization techniques. After selective etching of the PLA cylinders from shear-aligned monoliths, a nanoporous polystyrene matrix containing a hexagonally packed array of hydrophilic, PDMA-coated channels was obtained. Extremely high degrees of alignment and order could be attained, and nanoporous substrates with second-order orientation factors of as high as 0.96 were prepared. PDMA brushes inside the pores were then hydrolyzed in a controlled fashion to introduce a desired number of carboxylic acid groups to the internal pore surface. Carbodiimide mediated couplings with amines were then used to confirm the accessibility of the interior acidic groups and to render materials with different functional content. This modular approach allows for the convenient preparation of functionalized nanoporous materials from a single block copolymer precursor.

Acrylamides↗
PubMed2005

Thermotropic properties of organic nanocrystals embedded in ultrasmall crystallization chambers.

Crystallization of organic compounds in nanometer-scale channels of controlled pore glass (CPG) and porous polystyrene (p-PS), the latter prepared by etching of the polylactide (PLA) component of shear-aligned PS-PLA diblock copolymers, produces crystals with dimensions that reflect the size constraints imposed by the channels. The nanoscopic dimensions of the organic crystals embedded in the channels result in a substantial melting point depression compared with the bulk, as demonstrated here for 2,2,3,3,4,4-hexafluoro-1,5-pentanediol (HFPD) and (R)-(+)-3-methyladipic acid (R-MAA). The melting points decreased with decreasing channel diameter, consistent with the increasing surface-area-to-volume ratio of the crystals. Furthermore, at these length scales the latent heat of melting decreased with decreasing crystal size. The melting point depression for both HFPD and R-MAA was greater in p-PS than in CPG, which can only be explained by interactions of the nanocrystals and their corresponding melts with the channel walls. Collectively, these discoveries reveal that simplified descriptions used in previous investigations of embedded crystals, which were limited to porous glass matrixes and ignored the influence of the channel walls, do not capture all the factors affecting the thermotropic properties of the embedded nanocrystals.

Journal Article↗
PubMed2005

Post-polymerization functionalization of polyolefins.

Polyolefins are macromolecular alkanes and include the most familiar and most commercially produced plastic, polyethylene. The low cost of these materials combined with their diverse and desirable property profiles drive such large-scale production. One property that renders polyolefins so attractive is their resistance to harsh chemical environments. However, this attribute becomes a severe limitation when attempting to chemically convert these plastics into value-added materials. Functionalization of polymers is a useful methodology for the generation of new materials with wide ranging applications, and this tutorial review describes both new and established methods for the post-polymerization modification of polyolefins.

Alkanes↗
PubMed2005

Catalytic hydroxylation of polypropylenes.

The regioselective functionalization of both model and commercial polypropylenes of varying tacticity has been conducted by a rhodium-catalyzed functionalization of the methyl C-H bonds of the polymer with diboron reagents. Rhodium-catalyzed borylation of the polypropylenes, followed by oxidation of the boron-containing material, produced polymers containing 0.2-1.5% hydroxymethyl side chains. Both the number-average molecular weights and molecular weight distributions of the polypropylenes were essentially unchanged after the catalytic and oxidative functionalization process. The efficiency of the borylation process was affected by the molecular weight of the polymer, the steric hindrance around the methyl groups, and the ratio of the diboron reagent to the monomer repeat unit. The hydroxylated derivative of the commercial isotactic polypropylene was used as macroinitiator for the aluminum-mediated ring-opening polymerization of epsilon-caprolactone to prepare polypropylene-graft-polycaprolactone. This graft copolymer was an effective compatibilizer for melt blends of polypropylene and polycaprolactone.

Journal Article↗
PubMed2005

Strategies for controlling intra- and intermicellar packing in block copolymer solutions: illustrating the flexibility of the self-assembly toolbox.

Block copolymers constitute a class of self-assembling macromolecules that offer remarkable flexibility for controlling nanostructure, both in discrete objects and in bulk materials. Block copolymer micelles may be formed with multiple compartments by judicious choice of ingredients in an ABC triblock copolymer. For example, we have shown that a poly(ethylene oxide-b-styrene-b-fluorinated butadiene) triblock assembles in dilute aqueous solution into large, flat core/shell/corona disks, with the fluorine containing block forming the core. In contrast, the unfluorinated precursor generates large spherical micelles. A numerical analysis suggests that the disk-like motif is characteristic of the so-called superstrong segregation regime, whereby the interfacial tension becomes so large as to overwhelm the conformational entropy of the core blocks. For ABC miktoarm stars comprising polyethylene oxide, polyethylethylene, and polyhexafluoropropylene oxide arms, a much richer variety of micellar structures are observed. Prominent amongst these is a "segmented worm", in which alternating layers (5-7 nm thick) of hydrocarbon and fluorocarbon blocks form disks (6-10 nm in radius) that stack into cylindrical aggregates. The disk radii suggest almost fully stretched blocks, again consistent with the superstrong segregation regime. These structures are rationalized in terms of the constraints imposed by the star architecture, combined with the extremely strong interfacial tensions. In contrast, for lipids, surfactants, and aqueous diblock copolymers, increasing the interfacial tension can induce a transition from spheres to cylinders to flat bilayers; the disk-like motif is not usually seen. Interestingly, in aqueous diblocks both worm-like micelles and vesicles have been well-documented, whereas in "simple" organic systems they have not. We have shown that by suitable choice of block composition and solvent selectivity, the curvature sequence sphere/cylinder/vesicle can also be observed in poly(styrene-b-isoprene) diblocks in dialkyl phthalates. In more concentrated solutions such spherical micelles assemble onto body-centered or face-centered cubic lattices. In some cases a thermoreversible fcc/bcc transition has been noted. We have recently demonstrated that this transition corresponds to a particular aggregation number; higher aggregation numbers, found at lower temperatures, favor the "hard-sphere-like" fcc packing. All of these results are based on a combination of dynamic light scattering, small angle X-ray and neutron scattering, and cryogenic transmission electron microscopy.

Lecture↗
PubMed2004

Synthesis and characterization of hypercrosslinked, surface-confined, ultra-stable silica-based stationary phases.

The synthesis and chromatographic characterization of a highly crosslinked self-assembled monolayer (SAM) stationary phase whose acid and thermal stability were significantly improved relative to a sterically protected octadecylsilane (ODS) stationary phase were recently described [B.C. Trammell, L. Ma, H. Luo, D. Jin, M.A. Hillmyer, P.W. Carr, Anal. Chem. 74 (2002) 4634]. Unfortunately, this highly crosslinked SAM phase is much more silanophilic than a conventional sterically protected octadecyl silane phase. 29Si CP-MAS NMR analysis shows that the high concentration of silanol groups in the self-assembled monolayer causes the increased retention and poor peak shape of basic solutes. In this work dimethyl-chloromethyl-phenylethylchlorosilane (DM-CMPES), a silane with only a single reactive silyl chloride group was tested as an alternative to chloromethyl-phenyethyltrichlorosilane (CMPES) as the basis for forming the starting phase. Most importantly this "conventional" silanization step (i.e., a non-SAM silanization) was followed by a Friedel-Crafts reaction using aluminum chloride as the catalyst and styrene heptamer as the multi-valent crosslinker to form the surface DM-CMPES groups into a network polymer which is fully confined and attached to the surface. An octyl (C8) derivative of the hypercrosslinked (HC) dimethyl-chloromethyl-phenylethyl (DM-CMPES) surface-confined stationary phase was synthesized to demonstrate the potential of a Friedel-Crafts based approach to making high efficiency, acid and thermally stable polymerized phases on silica with selectivity closer to conventional aliphatic phases. The stability of the retention factors of these phases under very aggressive conditions (5%, (v/v) trifluoroacetic acid and 150 degrees C) are compared to that of a sterically protected octadecylsilane (ODS) phase. The comparisons show that the long term stability of highly crosslinked DM-CMPES phases in acid is superior to the conventional phase. The HC-C8 phase is even more stable in acid than the HC-styrene heptamer DM-CMPES phase on which it is based. Additionally, the efficiency and peak shape of several prototypical bases under acidic (0.1% TFA, pH 2.0) elution conditions are discussed. The column dynamics and thermodynamic characteristics of the HC-C8 phase were investigated to demonstrate the chromatographic utility of this ultra-stable phase. Inverse size exclusion chromatography and flow studies of the HC-C8 and the sterically protected C18 stationary phases indicate the absence of pore plugging and quite good (nearly 100,000 plates/m) chromatographic efficiency. Further chromatographic investigations show that the HC-C8 stationary phase behaves as a typical reversed phase material. The HC-C8 stationary phase offers unique chromatographic selectivity for certain classes of analytes compared to both alkyl and phenyl bonded phases.

Chromatography, Liquid↗
PubMed2004

Multicompartment micelles from ABC miktoarm stars in water.

By combining three mutually immiscible polymeric components in a mixed-arm star block terpolymer architecture, we have observed the formation of a previously unknown class of multicompartment micelles in dilute aqueous solution. Connection of water-soluble poly(ethylene oxide) and two hydrophobic but immiscible components (a polymeric hydrocarbon and a perfluorinated polyether) at a common junction leads to molecular frustration when dispersed in aqueous solution. The incompatible hydrophobic blocks form cores that are protected from the water by the poly(ethylene oxide) blocks, but both are forced to make contact with the poly(ethylene oxide) by virtue of the chain architecture. The structures that emerge depend on the relative lengths of the blocks and can be tuned from discrete multicompartment micelles to extended wormlike structures with segmented cores.

Butadienes↗
PubMed2004

Polymorph selectivity under nanoscopic confinement.

Polymorph selectivity has been achieved during crystallization of anthranilic acid (AA) and 5-methyl-2-[(2-nitrophyenyl)amino]-3-thiophenecarbonitrile (ROY), both considered benchmarks of polymorphic behavior, within nanoporous glass beads and polymer monoliths. Whereas polymorph III of AA crystallizes from the melt on nonporous glass beads or within larger pores, the metastable polymorph II crystallizes in pores with diameters <23 nm, with the selectivity toward this form increasing with decreasing pore size. Of the six ROY polymorphs characterized by single-crystal X-ray diffraction, the yellow form (Y) crystallizes during evaporation of pyridine solutions imbibed by the 30-nm cylindrical pores of porous polycyclohexylethylene (p-PCHE) monoliths. Although both R and ON grow from the melt on the external surfaces of PCHE, only the red form (R) crystallizes in the pores. Amorphous ROY also forms in p-PCHE pores during evaporation from pyridine solutions, subsequently crystallizing to the R nanocrystals upon heating. Although heterogeneous nucleation on the pore walls may play a role, these observations suggest that nucleation and polymorph selectivity is governed by critical size constraints imposed by the ultrasmall pores. The ability to achieve polymorph selectivity in both glass and polymer matrices suggests wide-ranging compatibility with various organic crystalline solids, promising a new approach to controlling polymorphism and searching for unknown polymorphs.

Journal Article↗
PubMed2004

Processing and properties of porous poly(L-lactide)/bioactive glass composites.

Porous poly(L-lactide)/bioactive glass (PLLA/BG) composites were prepared by phase separation of polymer solutions containing bioactive glass particles (average particle size: 1.5 microm). The composite microstructures consist of a porous PLLA matrix with glass particles distributed homogeneously throughout. Large pores (>100 microm) are present in a network of smaller (<10 microm) interconnected pores. The porous microstructure of the composites was not significantly influenced by glass content (9 or 29 vol%), but silane pretreatment of the glass resulted in better glass incorporation in the matrix. Mechanical tests showed that an increase in glass content increased the elastic modulus of the composites, but decreased their tensile strength and break strain. Silane pretreatment enhanced the increase in modulus and prevented the decrease in tensile strength with increasing glass content. Composites soaked in simulated body fluid (SBF) at body temperature formed bone-like apatite inside and on their surfaces. The silane pretreatment of glass particles delayed the in vitro apatite formation. This bone-like apatite formation demonstrates the composites' potential for integration with bone.

Biocompatible Materials↗
PubMed2003

A highly active zinc catalyst for the controlled polymerization of lactide.

We report the preparation, structural characterization, and detailed lactide polymerization behavior of a new Zn(II) alkoxide complex, (L(1)ZnOEt)(2) (L(1) = 2,4-di-tert-butyl-6-{[(2'-dimethylaminoethyl)methylamino]methyl}phenolate). While an X-ray crystal structure revealed the complex to be dimeric in the solid state, nuclear magnetic resonance and mass spectrometric analyses showed that the monomeric form L(1)ZnOEt predominates in solution. The polymerization of lactide using this complex proceeded with good molecular weight control and gave relatively narrow molecular weight distribution polylactide, even at catalyst loadings of <0.1% that yielded M(n) as high as 130 kg mol(-)(1). The effect of impurities on the molecular weight of the product polymers was accounted for using a simple model. Detailed kinetic studies of the polymerization reaction enabled integral and nonintegral orders in L(1)ZnOEt to be distinguished and the empirical rate law to be elucidated, -d[LA]/dt = k(p)[L(1)ZnOEt][LA]. These studies also showed that L(1)ZnOEt polymerizes lactide at a rate faster than any other Zn-containing system reported previously. This work provides important mechanistic information pertaining to the polymerization of lactide and other cyclic esters by discrete metal alkoxide complexes.

Journal Article↗
PubMed2003

An ultra acid stable reversed stationary phase.

We report a new reversed phase liquid chromatography (RPLC) phase with remarkable acid stability using dimethyl(ethylphenylchloromethyl)chlorosilane (1), oligomeric polystyrene (PS), and octylbenzene (C8). This phase Si-1-PS-C8 was prepared using silica modification processes and Friedel-Crafts alkylation chemistry. Under highly aggressive mobile phase conditions, Si-1-PS-C8 exhibited remarkable stability as evinced by only minimal reduction in retention factor (k') after 1400 column volumes at pH = 0.5 and 150 degrees C. The peak shapes for a variety of basic solutes were symmetric using Si-1-PS-C8. Evidence for a highly cross-linked coating of the silica particles was observed using scanning electron microscopy. The remarkable stability of this phase is unparalleled as compared to all other RPLC phases reported to date.

Drug Stability↗
PubMed2003

Micellar shape change and internal segregation induced by chemical modification of a tryptych block copolymer surfactant.

We report the detailed characterization of micelles formed by two nonionic, amphiphilic ABC triblock copolymers. Poly(ethylene oxide)-b-poly(styrene)-b-1,2-poly(butadiene) (PEO-b-PS-b-PB) triblock copolymer "OSB" forms core-corona spherical micelles in aqueous solution, and the two hydrophobic blocks S and B are mixed homogeneously within the micelle core. PEO-b-PS-b-PB:C6F13I triblock copolymer "OSF" was prepared by selective fluorination of the B block in OSB with n-perfluorohexyl iodide. Fluorination of the B block induces internal segregation into an inner F core and an intermediate S shell. Furthermore, the strong incompatibility that results from fluorination drives a shape change into an oblate ellipsoid. These micellar morphologies are confirmed by combined light, neutron, and X-ray scattering measurements, as well as TEM imaging.

Journal Article↗