Biomedical subjects

Mahrokh Dadsetan

Publications and source records attributed to Mahrokh Dadsetan.

4 recordsLinked to original sources

PubMed2005

Biostability and macrophage-mediated foreign body reaction of silicone-modified polyurethanes.

In this study, the effect of soft segment chemistry on the phase morphology and in vivo response of commercial-grade poly(ether urethane) (PEU), silicone-modified PEU (PEU-S), poly(carbonate urethane) (PCU), and silicone-modified PCU (PCU-S) elastomers were examined. Silicone-modified polyurethanes were developed to combine the biostability of silicone with the mechanical properties of PEUs. Results from the infrared spectroscopy confirmed the presence of silicone at the surface of the PEU-S and PCU-S films. Atomic force microscopy phase imaging indicated that the overall two-phase morphology of PEUs, necessary for its thermoplastic elastomeric properties, was not disrupted by the silicone modification. After material characterization, the in vivo foreign body response and biostability of the polyurethanes were studied using a subcutaneous cage implant protocol. The results from the cage implant study indicated that monocytes adhere, differentiate to macrophages which fuse to form foreign body giant cells on all of the polyurethanes. However, the silicone-modified surfaces promoted apoptosis of adherent macrophages at 4 days and high levels of macrophage fusion after 21 days. These results confirm that the surface of a biomaterial may influence the induction of apoptosis of adherent macrophages in vivo and are consistent with previous cell culture studies of these materials. This study validates the use of our standard cell culture protocol to predict in vivo behavior and further supports the hypothesis that interleukin-4 is the primary mediator of macrophage fusion and foreign body giant cell formation in vivo. The impact of these findings on the biostability of polyurethanes is the subject of current investigations. Attenuated total reflectance-Fourier transform infrared analysis of explanted specimens provided evidence of chain scission and crosslinking at the surface of all of the polyurethanes. The silicone modification did not fully inhibit the oxidative biodegradation of the polyether or polycarbonate soft segments; however, the rate of chain scission of PEU-S and PCU-S seemed to be slower than the control polyurethanes. To verify this finding and to quantify the rate of chain scission in order to predict long-term biostability, an in vitro environment that simulated the microenvironment at the adherent cell-material interface was used to accelerate the biodegradation of the polyurethanes. Polyurethane films were treated in vitro for up to 36 days in 20% hydrogen peroxide/0.1M cobalt chloride solution at 37 degrees Celsius. Characterization with attenuated total reflectance-Fourier transform infrared and scanning electron microscopy showed soft segment and hard segment degradation consistent with the chemical changes observed after long-term in vivo treatment. The biostability ranking of these four materials based on rate of chain scission and surface pitting was as follows: PEU < PEU-S PCU < PCU-S. The silicone modification increased the biostability of the PEU and PCU elastomers while maintaining the thermoplastic elastomeric properties.

Biocompatible Materials↗

PubMed2004

Surface chemistry mediates adhesive structure, cytoskeletal organization, and fusion of macrophages.

Surface chemistry modulates many critical functions of monocyte/macrophages such as adhesion, fusion, spreading, phagocytosis, and secretion. In this study, we investigated the effect of silicone modification on adhesive structure development and cytoskeletal reorganization of adherent macrophages on polyurethanes. Confocal scanning laser microscopy (CSLM) was used for qualitative and quantitative evaluation of cytoskeletal reorganization of adherent macrophages. Data presented here showed less spreading for adherent cells on silicone-modified materials due to the higher hydrophobicity and protein adsorption profile. This decrease in spreading was accompanied by less F-actin content in adherent cells on silicone-modified polyurethanes and PDMS control, indicating that silicone modification reduces the strength of adhesion. With the addition of interleukin-4 (IL-4) at days 3 and 7 to our culture, adherent cell morphology dramatically changed. The change in morphology led to higher macrophage fusion and foreign body giant cell (FBGC) formation on silicone modified materials after 10 days. In addition, mannose receptor (MR) expression was up-regulated on the silicone-modified polyurethanes and PDMS control in the presence of IL-4. Up-regulation of MR expression suggests an alternatively activated phenotype for adherent macrophages, which is accompanied with an attenuated proinflammatory cytokine production and reactive oxygen secretion. It appears that silicone modification accelerates acquisition of an alternative macrophage and FBGC phenotype, which may then result in increased polyurethane biostability.

Actins↗

PubMed2004

Poly(carbonate urethane) and poly(ether urethane) biodegradation: in vivo studies.

Several strategies have been used to increase the biostability of medical-grade polyurethanes while maintaining biocompatibility and mechanical properties. One approach is to chemically modify or replace the susceptible soft segment. Currently, poly(carbonate urethanes) (PCUs) are being evaluated as a replacement of poly(ether urethanes) (PEUs) in medical devices because of the increased oxidative stability of the polycarbonate soft segment. Preliminary in vivo and in vitro studies have reported improved biostability of PCUs over PEUs. Although several studies have reported evidence of in vitro degradation of these new polyurethanes, there has been no evidence of significant in vivo degradation that validates a degradation mechanism. In this study, the effect of soft segment chemistry on the phase morphology, mechanical properties, and in vivo response of commercial-grade PEU and PCU elastomers was examined. Results from dynamic mechanical testing and infrared spectroscopy suggested that the phase separation was better in PCU as compared with PEU. In addition, the higher modulus and reduced ultimate elongation of PCU was attributed to the reduced flexibility of the polycarbonate soft segment. Following material characterization, the in vivo biostability and biocompatibility of PEU and PCU were studied using a subcutaneous cage implant protocol. The results from the cage implant study and cell culture experiments indicated that monocytes adhere, differentiate, and fuse to form foreign body giant cells on both polyurethanes. It is now generally accepted that the reactive oxygen species released by these adherent macrophages and foreign body giant cells initiate PEU biodegradation. Attenuated total reflectance-Fourier transform infrared analysis of explanted samples provided evidence of chain scission and crosslinking in both polyurethanes. This indicated that the PCU was also susceptible to biodegradation by agents released from adherent cells. These results reinforce the need to evaluate and understand the biodegradation mechanisms of PCUs.

Biocompatible Materials↗

PubMed2004

Macrophage behavior on surface-modified polyurethanes.

Adherent macrophages and foreign body giant cells (FBGCs) are known to release degradative molecules that can be detrimental to the long-term biostability of polyurethanes. The modification of polyurethanes using surface modifying endgroups (SMEs) and/or the incorporation of silicone into the polyurethane soft segments may alter macrophage adhesion, fusion and apoptosis resulting in improved long-term biostability. An in vitro study of macrophage adhesion, fusion and apoptosis was performed on polyurethanes modified with fluorocarbon SMEs, polyethylene oxide (PEO) SMEs, or poly(dimethylsiloxane) (PDMS) co-soft segment and SMEs. The fluorocarbon SME and PEO SME modifications were shown to have no effect on macrophage adhesion and activity, while silicone modification had varied effects. Macrophages were capable of adapting to the surface and adhering in a similar manner to the silicone-modified and unmodified polyurethanes. In the absence of IL-4, macrophage fusion was comparable on the modified and unmodified polyurethanes, while macrophage apoptosis was promoted on the silicone modified surfaces. In contrast, when exposed to IL-4, a cytokine known to induce FBGC formation, silicone modification resulted in more macrophage fusion to form foreign body giant cells. In conclusion, fluorocarbon SME and PEO SME modification does not affect macrophage adhesion, fusion and apoptosis, while silicone modification is capable of mediating macrophage fusion and apoptosis. Silicone modification may be utilized to direct the fate of adherent macrophages towards FBGC formation or cell death through apoptosis.

Apoptosis↗