Search PubMed⌕ Search

Biomedical subjects

M Winey

Publications and source records attributed to M Winey.

At least 37 records · Page 2Linked to original sources
PubMed1999

Mechanisms of genetic instability revealed by analysis of yeast spindle pole body duplication.

Aneuploidy and polyploidy are commonly observed in transformed cells. These states arise from failures during mitotic chromosome segregation, some of which can be traced to defects in the function or duplication of the centrosome. The centrosome is the organizing center for the mitotic spindle, and the equivalent organelle in the budding yeast, Saccharomyces cerevisiae, is the spindle pole body. We review how defects in spindle pole body duplication or function lead to genetic instability in yeast. There are several well documented instances of genetic instability in yeast that can be traced to the spindle pole body, all of which serve as models for genetic instability in transformed cells.

Aneuploidy↗
PubMed1998

Saccharomyces cerevisiae Ndc1p is a shared component of nuclear pore complexes and spindle pole bodies.

We report a novel connection between nuclear pore complexes (NPCs) and spindle pole bodies (SPBs) revealed by our studies of the Saccharomyces cerevisiae NDC1 gene. Although both NPCs and SPBs are embedded in the nuclear envelope (NE) in yeast, their known functions are quite distinct. Previous work demonstrated that NDC1 function is required for proper SPB duplication (Winey, M., M.A. Hoyt, C. Chan, L. Goetsch, D. Botstein, and B. Byers. 1993. J. Cell Biol. 122:743-751). Here, we show that Ndc1p is a membrane protein of the NE that localizes to both NPCs and SPBs. Indirect immunofluorescence microscopy shows that Ndc1p displays punctate, nuclear peripheral localization that colocalizes with a known NPC component, Nup49p. Additionally, distinct spots of Ndc1p localization colocalize with a known SPB component, Spc42p. Immunoelectron microscopy shows that Ndc1p localizes to the regions of NPCs and SPBs that interact with the NE. The NPCs in ndc1-1 mutant cells appear to function normally at the nonpermissive temperature. Finally, we have found that a deletion of POM152, which encodes an abundant but nonessential nucleoporin, suppresses the SPB duplication defect associated with a mutation in the NDC1 gene. We show that Ndc1p is a shared component of NPCs and SPBs and propose a shared function in the assembly of these organelles into the NE.

Centrosome↗
PubMed1998

MOB1, an essential yeast gene required for completion of mitosis and maintenance of ploidy.

Mob1p is an essential Saccharomyces cerevisiae protein, identified from a two-hybrid screen, that binds Mps1p, a protein kinase essential for spindle pole body duplication and mitotic checkpoint regulation. Mob1p contains no known structural motifs; however MOB1 is a member of a conserved gene family and shares sequence similarity with a nonessential yeast gene, MOB2. Mob1p is a phosphoprotein in vivo and a substrate for the Mps1p kinase in vitro. Conditional alleles of MOB1 cause a late nuclear division arrest at restrictive temperature. MOB1 exhibits genetic interaction with three other yeast genes required for the completion of mitosis, LTE1, CDC5, and CDC15 (the latter two encode essential protein kinases). Most haploid mutant mob1 strains also display a complete increase in ploidy at permissive temperature. The mechanism for the increase in ploidy may occur through MPS1 function. One mob1 strain, which maintains stable haploidy at both permissive and restrictive temperature, diploidizes at permissive temperature when combined with the mps1-1 mutation. Strains containing mob2Delta also display a complete increase in ploidy when combined with the mps1-1 mutation. Perhaps in addition to, or as part of, its essential function in late mitosis, MOB1 is required for a cell cycle reset function necessary for the initiation of the spindle pole body duplication.

Amino Acid Sequence↗
PubMed1998

New alleles of the yeast MPS1 gene reveal multiple requirements in spindle pole body duplication.

In Saccharomyces cerevisiae, the Mps1p protein kinase is critical for both spindle pole body (SPB) duplication and the mitotic spindle assembly checkpoint. The mps1-1 mutation causes failure early in SPB duplication, and because the spindle assembly checkpoint is also compromised, mps1-1 cells proceed with a monopolar mitosis and rapidly lose viability. Here we report the genetic and molecular characterization of mps1-1 and five new temperature-sensitive alleles of MPS1. Each of the six alleles contains a single point mutation in the region of the gene encoding the protein kinase domain. The mutations affect several residues conserved among protein kinases, most notably the invariant glutamate in subdomain III. In vivo and in vitro kinase activity of the six epitope-tagged mutant proteins varies widely. Only two display appreciable in vitro activity, and interestingly, this activity is not thermolabile under the assay conditions used. While five of the six alleles cause SPB duplication to fail early, yielding cells with a single SPB, mps1-737 cells proceed into SPB duplication and assemble a second SPB that is structurally defective. This phenotype, together with the observation of intragenic complementation between this unique allele and two others, suggests that Mps1p is required for multiple events in SPB duplication.

Alleles↗
PubMed1998

DBF2 protein kinase binds to and acts through the cell cycle-regulated MOB1 protein.

The DBF2 gene of the budding yeast Saccharomyces cerevisiae encodes a cell cycle-regulated protein kinase that plays an important role in the telophase/G1 transition. As a component of the multisubunit CCR4 transcriptional complex, DBF2 is also involved in the regulation of gene expression. We have found that MOB1, an essential protein required for a late mitotic event in the cell cycle, genetically and physically interacts with DBF2. DBF2 binds MOB1 in vivo and can bind it in vitro in the absence of other yeast proteins. We found that the expression of MOB1 is also cell cycle regulated, its expression peaking slightly before that of DBF2 at the G2/M boundary. While overexpression of DBF2 suppressed phenotypes associated with mob1 temperature-sensitive alleles, it could not suppress a mob1 deletion. In contrast, overexpression of MOB1 suppressed phenotypes associated with a dbf2-deleted strain and suppressed the lethality associated with a dbf2 dbf20 double deletion. A mob1 temperature-sensitive allele with a dbf2 disruption was also found to be synthetically lethal. These results are consistent with DBF2 acting through MOB1 and aiding in its function. Moreover, the ability of temperature-sensitive mutated versions of the MOB1 protein to interact with DBF2 was severely reduced, confirming that binding of DBF2 to MOB1 is required for a late mitotic event. While MOB1 and DBF2 were found to be capable of physically associating in a complex that did not include CCR4, MOB1 did interact with other components of the CCR4 transcriptional complex. We discuss models concerning the role of DBF2 and MOB1 in controlling the telophase/G1 transition.

Alleles↗
PubMed1998

Mph1, a member of the Mps1-like family of dual specificity protein kinases, is required for the spindle checkpoint in S. pombe.

The spindle assembly checkpoint pathway is not essential for normal mitosis but ensures accurate nuclear division by blocking the metaphase to anaphase transition in response to a defective spindle. Here, we report the isolation of a new spindle checkpoint gene, mph1 (Mps1p-like pombe homolog), in the fission yeast Schizosaccharomyces pombe, that is required for checkpoint activation in response to spindle defects. mph1 functions upstream of mad2, a previously characterized component of the spindle checkpoint. Overexpression of mph1, like overexpression of mad2, mimics activation of the checkpoint and imposes a metaphase arrest. mph1 protein shares sequence similarity with Mps1p, a dual specificity kinase that functions in the spindle checkpoint of the budding yeast Saccharomyces cerevisiae. Complementation analysis demonstrates that mph1 and Mps1p are functionally related. They differ in that Mps1p, but not mph1, has an additional essential role in spindle pole body duplication. We propose that mph1 is the MPS1 equivalent in the spindle checkpoint pathway but not in the SPB duplication pathway. Overexpression of mad2 does not require mph1 to impose a metaphase arrest, which indicates a mechanism of spindle checkpoint activation other than mph1/Mps1p kinase-dependent phosphorylation. In the same screen which led to the isolation of mad2 and mph1, we also isolated dph1, a cDNA that encodes a protein 46% identical to an S. cerevisiae SPB duplication protein, Dsk2p. Our initial characterization indicates that S.p. dph1 and S.c. DSK2 are functionally similar. Together these results suggest that the budding and fission yeasts share common elements for SPB duplication, despite differences in SPB structure and the timing of SPB duplication relative to mitotic entry.

Amino Acid Sequence↗
PubMed1997

The yeast CDC37 gene interacts with MPS1 and is required for proper execution of spindle pole body duplication.

The MPS1 gene from Saccharomyces cerevisiae encodes an essential protein kinase required for spindle pole body (SPB) duplication and for the mitotic spindle assembly checkpoint. Cells with the mps1-1 mutation fail early in SPB duplication and proceed through monopolar mitosis with lethal consequences. We identified CDC37 as a multicopy suppressor of mps1-1 temperature-sensitive growth. Suppression is allele specific, and synthetic lethal interactions occur between mps1 and cdc37 alleles. We examined the cdc37-1 phenotype for defects related to the SPB cycle. The cdc37-1 temperature-sensitive allele causes unbudded, G1 arrest at Start (Reed, S.I. 1980. Genetics. 95: 561-577). Reciprocal shifts demonstrate that cdc37-1 arrest is interdependent with alpha-factor arrest but is not a normal Start arrest. Although the cells are responsive to alpha-factor at the arrest, SPB duplication is uncoupled from other aspects of G1 progression and proceeds past the satellite-bearing SPB stage normally seen at Start. Electron microscopy reveals side-by-side SPBs at cdc37-1 arrest. The outer plaque of one SPB is missing or reduced, while the other is normal. Using the mps2-1 mutation to distinguish between the SPBs, we find that the outer plaque defect is specific to the new SPB. This phenotype may arise in part from reduced Mps1p function: although Mps1p protein levels are unaffected by the cdc37-1 mutation, kinase activity is markedly reduced. These data demonstrate a requirement for CDC37 in SPB duplication and suggest a role for this gene in G1 control. CDC37 may provide a chaperone function that promotes the activity of protein kinases.

Base Sequence↗
PubMed1997

Three-dimensional analysis and ultrastructural design of mitotic spindles from the cdc20 mutant of Saccharomyces cerevisiae.

The three-dimensional organization of mitotic microtubules in a mutant strain of Saccharomyces cerevisiae has been studied by computer-assisted serial reconstruction. At the nonpermissive temperature, cdc20 cells arrested with a spindle length of approximately 2.5 microns. These spindles contained a mean of 81 microtubules (range, 56-100) compared with 23 in wild-type spindles of comparable length. This increase in spindle microtubule number resulted in a total polymer length up to four times that of wild-type spindles. The spindle pole bodies in the cdc20 cells were approximately 2.3 times the size of wild-type, thereby accommodating the abnormally large number of spindle microtubules. The cdc20 spindles contained a large number of interpolar microtubules organized in a "core bundle." A neighbor density analysis of this bundle at the spindle midzone showed a preferred spacing of approximately 35 nm center-to-center between microtubules of opposite polarity. Although this is evidence of specific interaction between antiparallel microtubules, mutant spindles were less ordered than the spindle of wild-type cells. The number of noncore microtubules was significantly higher than that reported for wild-type, and these microtubules did not display a characteristic metaphase configuration. cdc20 spindles showed significantly more cross-bridges between spindle microtubules than were seen in the wild type. The cross-bridge density was highest between antiparallel microtubules. These data suggest that spindle microtubules are stabilized in cdc20 cells and that the CDC20 gene product may be involved in cell cycle processes that promote spindle microtubule disassembly.

Cdc20 Proteins↗
PubMed1997

Nuclear pore complex number and distribution throughout the Saccharomyces cerevisiae cell cycle by three-dimensional reconstruction from electron micrographs of nuclear envelopes.

The number of nuclear pore complexes (NPCs) in individual nuclei of the yeast Saccharomyces cerevisiae was determined by computer-aided reconstruction of entire nuclei from electron micrographs of serially sectioned cells. Nuclei of 32 haploid cells at various points in the cell cycle were modeled and found to contain between 65 and 182 NPCs. Morphological markers, such as cell shape and nuclear shape, were used to determine the cell cycle stage of the cell being examined. NPC number was correlated with cell cycle stage to reveal that the number of NPCs increases steadily, beginning in G1-phase, suggesting that NPC assembly occurs continuously throughout the cell cycle. However, accumulation of nuclear envelope observed during the cell cycle, indicated by nuclear surface area, is not continuous at the same rate, such that the density of NPCs per unit area of nuclear envelope peaks in apparent S-phase cells. Analysis of the nuclear envelope reconstructions also revealed no preferred NPC-to-NPC distance. However, NPCs were found in large clusters over regions of the nuclear envelope. Interestingly, clusters of NPCs were most pronounced in early mitotic nuclei and were found to be associated with the spindle pole bodies, but the functional significance of this association is unknown.

Cell Cycle↗
PubMed1996

Activation of the budding yeast spindle assembly checkpoint without mitotic spindle disruption.

The spindle assembly checkpoint keeps cells with defective spindles from initiating chromosome segregation. The protein kinase Mps1 phosphorylates the yeast protein Mad1p when this checkpoint is activated, and the overexpression of Mps1p induces modification of Mad1p and arrests wild-type yeast cells in mitosis with morphologically normal spindles. Spindle assembly checkpoint mutants overexpressing Mps1p pass through mitosis without delay and can produce viable progeny, which demonstrates that the arrest of wild-type cells results from inappropriate activation of the checkpoint in cells whose spindle is fully functional. Ectopic activation of cell-cycle checkpoints might be used to exploit the differences in checkpoint status between normal and tumor cells and thus improve the selectivity of chemotherapy.

Carrier Proteins↗
PubMed1996

Keeping the centrosome cycle on track. Genome stability.

The protein kinase Mps1 and p53 both function in centrosome duplication and the spindle cell-cycle checkpoint. Defects in these functions can be potent sources of genomic instability by allowing mitosis to proceed with aberrant mitotic spindles.

Animals↗
PubMed1996

The Saccharomyces cerevisiae spindle pole body duplication gene MPS1 is part of a mitotic checkpoint.

M-phase checkpoints inhibit cell division when mitotic spindle function is perturbed. Here we show that the Saccharomyces cerevisiae MPS1 gene product, an essential protein kinase required for spindle pole body (SPB) duplication (Winey et al., 1991; Lauze et al., 1995), is also required for M-phase check-point function. In cdc31-2 and mps2-1 mutants, conditional failure of SPB duplication results in cell cycle arrest with high p34CDC28 kinase activity that depends on the presence of the wild-type MAD1 checkpoint gene, consistent with checkpoint arrest of mitosis. In contrast, mps1 mutant cells fail to duplicate their SPBs and do not arrest division at 37 degrees C, exhibiting a normal cycle of p34CDC28 kinase activity despite the presence of a monopolar spindle. Double mutant cdc31-2, mps1-1 cells also fail to arrest mitosis at 37 degrees C, despite having SPB structures similar to cdc31-2 single mutants as determined by EM analysis. Arrest of mitosis upon microtubule depolymerization by nocodazole is also conditionally absent in mps1 strains. This is observed in mps1 cells synchronized in S phase with hydroxyurea before exposure to nocodazole, indicating that failure of checkpoint function in mps1 cells is independent of SPB duplication failure. In contrast, hydroxyurea arrest and a number of other cdc mutant arrest phenotypes are unaffected by mps1 alleles. We propose that the essential MPS1 protein kinase functions both in SPB duplication and in a mitotic checkpoint monitoring spindle integrity.

CDC28 Protein Kinase, S cerevisiae↗
PubMed1996

Cdc53p acts in concert with Cdc4p and Cdc34p to control the G1-to-S-phase transition and identifies a conserved family of proteins.

Regulation of cell cycle progression occurs in part through the targeted degradation of both activating and inhibitory subunits of the cyclin-dependent kinases. During G1, CDC4, encoding a WD-40 repeat protein, and CDC34, encoding a ubiquitin-conjugating enzyme, are involved in the destruction of these regulators. Here we describe evidence indicating that CDC53 also is involved in this process. Mutations in CDC53 cause a phenotype indistinguishable from those of cdc4 and cdc34 mutations, numerous genetic interactions are seen between these genes, and the encoded proteins are found physically associated in vivo. Cdc53p defines a large family of proteins found in yeasts, nematodes, and humans whose molecular functions are uncharacterized. These results suggest a role for this family of proteins in regulating cell cycle proliferation through protein degradation.

Amino Acid Sequence↗
PubMed1995

Yeast spindle pole body duplication gene MPS1 encodes an essential dual specificity protein kinase.

The MPS1 gene has been previously identified by a mutant allele that shows defects in spindle pole body (SPB) duplication and cell cycle control. The SPB is the centrosome-equivalent organelle in the yeast Saccharomyces cerevisiae, and it nucleates all the microtubules in the cell. We report the isolation of the MPS1 gene, which encodes an essential protein kinase homolog. The MPS1 open reading frame has been fused to those that encode the LexA protein or the GST protein and both of these constructs function in yeast. The fusion proteins have been affinity-purified from yeast extracts and the GST chimeric protein has been found to be a phosphoprotein. Both proteins have been used to demonstrate intrinsic in vitro protein kinase activity of Mps1p against exogenous substrates and itself (autophosphorylation). A mutation predicted to abolish kinase function not only eliminates in vitro protein kinase activity, but also behaves like a null mutation in vivo, suggesting that kinase activity contributes to the essential function of the protein. Phosphoamino acid analysis of substrates phosphorylated by Mps1p indicates that this kinase can phosphorylate serine, threonine and tyrosine residues, identifying Mps1p as a dual specificity protein kinase.

Amino Acid Sequence↗
PubMed1995

Three-dimensional ultrastructural analysis of the Saccharomyces cerevisiae mitotic spindle.

The three dimensional organization of microtubules in mitotic spindles of the yeast Saccharomyces cerevisiae has been determined by computer-aided reconstruction from electron micrographs of serially cross-sectioned spindles. Fifteen spindles ranging in length from 0.6-9.4 microns have been analyzed. Ordered microtubule packing is absent in spindles up to 0.8 micron, but the total number of microtubules is sufficient to allow one microtubule per kinetochore with a few additional microtubules that may form an interpolar spindle. An obvious bundle of about eight interpolar microtubules was found in spindles 1.3-1.6 microns long, and we suggest that the approximately 32 remaining microtubules act as kinetochore fibers. The relative lengths of the microtubules in these spindles suggest that they may be in an early stage of anaphase, even though these spindles are all situated in the mother cell, not in the isthmus between mother and bud. None of the reconstructed spindles exhibited the uniform populations of kinetochore microtubules characteristic of metaphase. Long spindles (2.7-9.4 microns), presumably in anaphase B, contained short remnants of a few presumed kinetochore microtubules clustered near the poles and a few long microtubules extending from each pole toward the spindle midplane, where they interdigitated with their counterparts from the other pole. Interpretation of these reconstructed spindles offers some insights into the mechanisms of mitosis in this yeast.

Anaphase↗
PubMed1994

Yeast beta- and beta'-coat proteins (COP). Two coatomer subunits essential for endoplasmic reticulum-to-Golgi protein traffic.

To understand better the role of non-clathrin coat proteins in membrane traffic, we have cloned and characterized two essential genes encoding subunits of the yeast coatomer, SEC26 and SEC27. Sec26p is a 109-kDa protein that shares 43% sequence identity with mammalian beta-coat protein (beta-COP). Sec26p-depleted cells accumulate endoplasmic reticulum (ER) forms of secretory precursor proteins, and growth ceases after a dramatic accumulation of ER membranes. Sec26p overproduction partially suppresses sec27-1, a new mutant that shows a temperature-sensitive defect in ER-to-Golgi transport. The SEC27 gene was cloned, and the sequence predicts a 99.4-kDa protein with 45% sequence identity to mammalian beta'-COP. Our sequence data support a two-domain model for the SEC27 protein: a conserved amino-terminal domain, composed of five WD-40 repeats similar to those found in beta-subunits of trimeric G proteins, and a less conserved carboxyl-terminal domain. Genetic interactions connect sec27-1 and sec21-1 (coatomer gamma subunit) with the ARF1 and ARF2 genes and with the SEC22, BET1, and BOS1 genes, which encode membrane proteins involved in ER-to-Golgi transport.

Amino Acid Sequence↗