Search PubMed⌕ Search

Biomedical subjects

M Wilmanns

Publications and source records attributed to M Wilmanns.

36 records · Page 2Linked to original sources

Efficient expression, purification and crystallisation of two hyperthermostable enzymes of histidine biosynthesis.

Enzymes from hyperthermophiles can be efficiently purified after expression in mesophilic hosts and are well-suited for crystallisation attempts. Two enzymes of histidine biosynthesis from Thermotoga maritima, N'-((5'-phosphoribosyl)-formimino)-5-aminoimidazol-4-carb oxamid ribonucleotide isomerase and the cyclase moiety of imidazoleglycerol phosphate synthase, were overexpressed in Escherichia coli, both in their native and seleno-methionine-labelled forms, purified by heat precipitation of host proteins and crystallised. N'-((5'-phosphoribosyl)-formimino)-5-aminoimidazol-4-carb oxamid ribonucleotide isomerase crystallised in four different forms, all suitable for X-ray structure solution, and the cyclase moiety of imidazoleglycerol phosphate synthase yielded one crystal form that diffracted to atomic resolution. The obtained crystals will enable the determination of the first three-dimensional structures of enzymes from the histidine biosynthetic pathway.

Aldose-Ketose Isomerases↗

Thermodynamic analysis of alpha-spectrin SH3 and two of its circular permutants with different loop lengths: discerning the reasons for rapid folding in proteins.

The temperature dependences of the unfolding-refolding reaction of a shorter version of the alpha-spectrin SH3 domain (PWT) used as a reference and of two circular permutants (with different poly-Gly loop lengths at the newly created fused loop) have been measured by differential scanning microcalorimetry and stopped-flow kinetics, to characterize the thermodynamic nature of the transition and native states. Differential scanning calorimetry results show that all these species do not belong to the same temperature dependency of heat effect. The family of the N47-D48s circular permutant (with 0-6 Gly inserted at the fused-loop) shows a higher enthalpy as happens with the PWT domain. The wild type (WT) and the S19-P20s permutant family have a more similar behavior although the second is far less stable. The crystallographic structure of the PWT shows a hairpin formation in the region corresponding to the unstructured N-terminus tail of the WT, explaining the enthalpic difference. There is a very good correlation between the calorimetric changes and the structural differences between the WT, PWT, and two circular permutants that suggests that their unfolded state cannot be too different. Elongation of the fused loop in the two permutants, taking as a reference the protein with one inserted Gly, results in a small Gibbs energy change of entropic origin as theoretically expected. Eyring plots of the unfolding and refolding semireactions show different behaviors for PWT, S19-P20s, and N47-D48s in agreement with previous studies indicating that they have different transition states. The SH3 transition state is relatively close to the native state with regard to changes in heat capacity and entropy, indicating a high degree of compactness and order. Regarding the differences in thermodynamic parameters, it seems that rapid folding could be achieved in proteins by decreasing the entropic barrier.

Amino Acid Sequence↗

Structural basis for activation of the titin kinase domain during myofibrillogenesis.

The giant muscle protein titin (connectin) is essential in the temporal and spatial control of the assembly of the highly ordered sarcomeres (contractile units) of striated muscle. Here we present the crystal structure of titin's only catalytic domain, an autoregulated serine kinase (titin kinase). The structure shows how the active site is inhibited by a tyrosine of the kinase domain. We describe a dual mechanism of activation of titin kinase that consists of phosphorylation of this tyrosine and binding of calcium/calmodulin to the regulatory tail. The serine kinase domain of titin is the first known non-arginine-aspartate kinase to be activated by phosphorylation. The phosphorylated tyrosine is not located in the activation segment, as in other kinases, but in the P + 1 loop, indicating that this tyrosine is a binding partner of the titin kinase substrate. Titin kinase phosphorylates the muscle protein telethonin in early differentiating myocytes, indicating that this kinase may act in myofibrillogenesis.

Amino Acid Sequence↗

Crystal structure of the abl-SH3 domain complexed with a designed high-affinity peptide ligand: implications for SH3-ligand interactions.

The Abl-SH3 domain is implicated in negative regulation of the Abl kinase by mediating protein-protein interactions. High-affinity SH3 ligands could compete for these interactions and specifically activate the Abl kinase, providing control and a better understanding of the molecular interactions that underlie diseases where SH3 domains are involved. The p41 peptide (APSYSPPPPP) is a member of a group of peptide ligands designed to bind specifically the Abl-SH3 domain. It binds to Abl-SH3 with a Kd of 1.5 microM, whereas its affinity for the Fyn-SH3 domain is 273 microM. We have determined the crystal structure of the Abl-SH3 domain in complex with the high-affinity peptide ligand p41 at 1.6 A resolution. In the crystal structure, this peptide adopts a polyproline type II helix conformation through residue 5 to 10, and it binds in type I orientation to the Abl-SH3 domain. The tyrosine side-chain in position 4 of the peptide is hydrogen bonded to two residues in the RT-loop of the Abl-SH3 domain. The tight fit of this side-chain into the RT-loop pocket is enhanced by conformational adjustment of the main chain at position 5. The SH3 ligand peptides can be divided into two distinct parts. The N-terminal part binds to the SH3 domain in the region formed by the valley between the nSrc and RT-loops. It determines the specificity for different SH3 domains. The C-terminal part adopts a polyproline type II helix conformation. This binds to a well-conserved hydrophobic surface of the SH3 domain. Analysis of two "half"-peptides, corresponding to these ligand parts, shows that both are essential components for strong binding to the SH3 domains. The crystal structure of the Abl-SH3:p41 complex explains the high affinity and specificity of the p41 peptide towards the Abl-SH3 domain, and reveals principles that will be exploited for future design of small, high-affinity ligands to interfere efficiently with the in vivo regulation of Abl kinase activity.

Amino Acid Sequence↗

Molecular replacement with NMR models using distance-derived pseudo B factors.

The statistical significance of molecular-replacement solutions with models derived from NMR data is strongly enhanced if pseudo B factors that reflect expected atomic coordinate errors are introduced. These B factors are derived from atomic distances of an ensemble of NMR models and an averaged model. A recently determined X-ray structure of a Pleckstrin homology domain:ligand complex has been used as a test case for molecular replacement with NMR templates. The feasibility of the models for molecular replacement has been studied in two steps: (i) correctness of solutions, verified by correct rotational angles and translations; (ii) statistical significance (detection) of solutions, measured by R factors and correlation coefficients in the translation function. None of the models with uniform B factors were detectable in the translation function whereas two models with distance-derived B factors gave statistically significant R factors and correlation coefficients. The potential impact of distance-derived B factors on the detectability of molecular-replacement solutions was further tested by using B factors that were derived from spatial distances between each NMR model and the X-ray structure. It is concluded that the introduction of distance-derived B factors can be an essential component of many future molecular-replacement problems that use NMR models as templates.

Journal Article↗

Different folding transition states may result in the same native structure.

The crystal structures of two circular permutants of the alpha-spectrin SH3 domain with new termini within the RT loop (S19-P20s) and the distal loop (N47-D48s) have been determined at 2.02 and 1.77 A resolution respectively. Both fold into the same three-dimensional structure as the wild-type SH3 domain except for the engineered loop that fuses the wild-type termini. The cleaved RT loop in S19-P20s loses nine conserved hydrogen bonds through local hydrogen bond unzipping; no hydrogen bond unzipping occurs in N47-D48s. The structures of the transition states for folding of wild-type alpha-spectrin SH3 domain and the two circular permutants have been examined by analysis of the folding kinetics of eight strategically distributed point mutants. Unlike the native structures, the transition states of the three proteins are considerably different, suggesting that there is no direct relationship between these two states in a protein.

Amino Acid Sequence↗

Crystal structure of the membrane-exposed domain from a respiratory quinol oxidase complex with an engineered dinuclear copper center.

Cytochrome oxidase is a membrane protein complex that catalyzes reduction of molecular oxygen to water and utilizes the free energy of this reaction to generate a transmembrane proton gradient during respiration. The electron entry site in subunit II is a mixed-valence dinuclear copper center in enzymes that oxidize cytochrome c. This center has been lost during the evolution of the quinoloxidizing branch of cytochrome oxidases but can be restored by engineering. Herein we describe the crystal structures of the periplasmic fragment from the wild-type subunit II (CyoA) of Escherichia coli quinol oxidase at 2.5-A resolution and of the mutant with the engineered dinuclear copper center (purple CyoA) at 2.3-A resolution. CyoA is folded as an 11-stranded mostly antiparallel beta-sandwich followed by three alpha-helices. The dinuclear copper center is located at the loops between strands beta 5-beta 6 and beta 9-beta 10. The two coppers are at a 2.5-A distance and symmetrically coordinated to the main ligands that are two bridging cysteines and two terminal histidines. The residues that are distinct in cytochrome c and quinol oxidases are around the dinuclear copper center. Structural comparison suggests a common ancestry for subunit II of cytochrome oxidase and blue copper-binding proteins.

Amino Acid Sequence↗

Structure of the binding site for inositol phosphates in a PH domain.

Phosphatidylinositol bisphosphate has been found to bind specifically to pleckstrin homology (PH) domains that are commonly present in signalling proteins but also found in cytoskeleton. We have studied the complexes of the beta-spectrin PH domain and soluble inositol phosphates using both circular dichroism and nuclear magnetic resonance spectroscopy, and X-ray crystallography. The specific binding site is located in the centre of a positively charged surface patch of the domain. The presence of 4,5-bisphosphate group on the inositol ring is critical for binding. In the crystal structure that has been determined at 2.0 A resolution, inositol-1,4,5-trisphosphate is bound with salt bridges and hydrogen bonds through these phosphate groups whereas the 1-phosphate group is mostly solvent-exposed and the inositol ring has virtually no interactions with the protein. We propose a model in which PH domains are involved in reversible anchoring of proteins to membranes via their specific binding to phosphoinositides. They could also participate in a response to a second messenger such as inositol trisphosphate, organizing cross-roads in cellular signalling.

Amino Acid Sequence↗

Inverse protein folding by the residue pair preference profile method: estimating the correctness of alignments of structurally compatible sequences.

The residue pair preference profile (R3P) method is an inverse folding method that combines environmental profiles and pair preference profiles. The method uses statistical preferences for residue pairs which score the likelihood of finding a profiled residue to be paired with a residue within its local environment. All pairs are characterized by their dihedral angles, secondary structure and number of neighboring residues as a function of residue type. Each residue pair preference is expressed for all 20 amino acids of the profiled residue and is weighted by the compatibility of the environment residue with its own local environment. The R3P method produces an initial profile-sequence alignment which is then refined by converting the initial profile into a profile of a target sequence threaded into the structure of the initial profile. We have tested this method by evaluating alignments of sequences with known 3-D structures using structural superposition alignments as reference. R3P-sequence alignments are > or = 50% correct on average for sequences whose 3-D structure pairs superimpose with an r.m.s. deviation of < or = 1.97 A. The average improvement in correctness during this iterative refinement is 14%. The R3P-sequence alignments are compared with sequence-sequence and 3-D profile-sequence alignments. When all three methods are combined, on average > or = 50% of the alignments are correct for pairs of 3-D structures that superimpose within 2.12 A. A 3-D model of HisA is predicted with the combined method.

Aldose-Ketose Isomerases↗

High-resolution crystal structures of tyrosine kinase SH3 domains complexed with proline-rich peptides.

Src-homology 3 (SH3) domains bind to proline-rich motifs in target proteins. We have determined high-resolution crystal structures of the complexes between the SH3 domains of Abl and Fyn tyrosine kinases, and two ten-residue proline-rich peptides derived from the SH3-binding proteins 3BP-1 and 3BP-2. The X-ray data show that the basic mode of binding of both proline-rich peptides is the same. Peptides are bound over their entire length and interact with three major sites on the SH3 molecules by both hydrogen-bonding and van der Waals contacts. Residues 4-10 of the peptide adopt the conformation of a left-handed polyproline helix type II. Binding of the proline at position 2 requires a kink at the non-proline position 3.

Amino Acid Sequence↗

Three-dimensional profiles from residue-pair preferences: identification of sequences with beta/alpha-barrel fold.

The three-dimensional profile method expresses the three-dimensional structure of a protein as a table, the profile, which represents the local environment of each residue. The score of an amino acid sequence, aligned with the three-dimensional profile, reflects its compatibility with the profiled structure. In the original implementation, each local environment was characterized by its polarity, the area buried of its side chain, and its secondary structure. Here we describe a modified three-dimensional profile algorithm that characterizes the local environment in terms of the statistical preferences of the profiled residue for neighbors of specific residue types, main-chain conformations, or secondary structure. Combined profiles of the original and the three new types were tested on beta/alpha-barrel protein structures. The method identified the following enzymes of unknown three-dimensional structure as probable beta/alpha-barrels, all of which catalyze reactions in the biosynthesis of aromatic amino acids: anthranilate phosphoribosyltransferase (trpD), glutamine amidotransferase (trpG), and phosphoribosylformimino-5-aminoimidazole carboxamide ribotide isomerase (hisA).

Aldose-Ketose Isomerases↗

Protein engineering of a disulfide bond in a beta/alpha-barrel protein.

A disulfide bond has been introduced in the beta/alpha-barrel enzyme N-(5'-phosphoribosyl)anthranilate isomerase from Saccharomyces cerevisiae. The design of this disulfide bond was based on a model structure of this enzyme, built from the high-resolution crystal structure of the N-(5'-phosphoribosyl)anthranilate isomerase domain from Escherichia coli. The disulfide cross-link is spontaneously formed in vitro between residues 27 and 212, located in the structurally adjacent alpha-helices 1 and 8 of the outer helical ring of the beta/alpha-barrel. It creates a loop of 184 residues that account for 83% of the sequence of this enzyme, thus forming a quasi circular protein. The cross-linked mutant enzyme displays wild-type steady-state kinetic parameters. Measurements of the equilibrium constant for the reduction of this disulfide bond by 1,4-dithiothreitol show that its bond strength is comparable to that of other engineered protein disulfide bonds. The oxidized, cross-linked N-(5'-phosphoribosyl)anthranilate isomerase mutant is about 1.0 kcal/mol more stable than the wild-type enzyme, as estimated from its equilibrium unfolding transitions by guanidine hydrochloride.

Aldose-Ketose Isomerases↗

Three-dimensional structure of the bifunctional enzyme phosphoribosylanthranilate isomerase: indoleglycerolphosphate synthase from Escherichia coli refined at 2.0 A resolution.

The three-dimensional structure of the monomeric bifunctional enzyme N-(5'-phosphoribosyl)anthranilate isomerase:indole-3-glycerol-phosphate synthase from Escherichia coli has been refined at 2.0 A resolution, using oscillation film data obtained from synchrotron radiation. The model includes the complete protein (452 residues), two phosphate ions and 628 water molecules. The final R-factor is 17.3% for all observed data between 15 and 2 A resolution. The root-mean-square deviations from ideal bond lengths and bond angles are 0.010 A and 3.2 degrees, respectively. The structure of N-(5'-phosphoribosyl)anthranilate isomerase: indole-3-glycerol-phosphate synthase from E. coli comprises two beta/alpha-barrel domains that superimpose with a root-mean-square deviation of 2.03 A for 138 C alpha-pairs. The C-terminal domain (residues 256 to 452) catalyses the PRAI reaction and the N-terminal domain (residues 1 to 255) catalyses the IGPS reaction, two sequential steps in tryptophan biosynthesis. The enzyme has the overall shape of a dumb-bell, resulting in a surface area that is considerably larger than normally observed for monomeric proteins of this size. The active sites of the PRAI and the IGPS domains, both located at the C-terminal side of the central beta-barrel, contain equivalent binding sites for the phosphate moieties of the substrates N-(5'-phosphoribosyl) anthranilate and 1-(o-carboxyphenylamino)-1-deoxyribulose-5-phosphate. These two phosphate binding sites are identical with respect to their positions within the tertiary structure of the beta/alpha-barrel, the conformation of the residues involved in phosphate binding and the hydrogen-bonding network between the phosphate ions and the protein. The active site cavities of both domains contain similar hydrophobic pockets that presumably bind the anthranilic acid moieties of the substrates. These similarities of the tertiary structures and the active sites of the two domains provide evidence that N-(5'-phosphoribosyl)anthranilate isomerase:indole-3-glycerol-phosphate synthase from E. coli results from a gene duplication event of a monomeric beta/alpha-barrel ancestor.

Aldose-Ketose Isomerases↗

Structural conservation in parallel beta/alpha-barrel enzymes that catalyze three sequential reactions in the pathway of tryptophan biosynthesis.

Three successive steps in tryptophan biosynthesis are catalyzed by single-domain proteins, each folded as a parallel beta/alpha-barrel, as observed in the crystal structures of the bienzyme (phosphoribosyl)-anthranilate isomerase:indoleglycerolphosphate synthase from Escherichia coli [Priestle, J.P., Grütter, M. G., White, J. L., Vincent, M. G., Kania, M., Wilson, E., Jardetzky, T. S., Kirschner, K., & Jansonius, J. N. (1987) Proc. Natl. Acad. Sci. U.S.A. 84, 5690-5694] and the alpha-subunit of the tetrameric bienzyme tryptophan synthase from Salmonella typhimurium [Hyde, C. C., Ahmed, S. A., Padlan, E. A., Miles, E. W., & Davies, D. R. (1988) J. Biol. Chem. 263, 17857-17871]. Recent refinement of the crystal structures of these enzymes at atomic resolution revealed that they contain a common phosphate group binding site in the beta/alpha-barrel, created by residues of the loop between beta-strand 7 and alpha-helix 7 and the N-terminus of an additional helix 8'. The close similarities of their beta/alpha-barrel structures permitted the alignment of 50-75% of their respective amino acid sequences. Considerable sequence similarity was detected in the regions spanning the phosphate binding sites, whereas the percentage of identical residues was barely significant for the remaining parts of the enzymes. These observations suggest divergent evolution of these three beta/alpha-barrel enzymes involved in tryptophan biosynthesis. The same phosphate binding site was also observed in six other beta/alpha-barrel enzymes that are functionally unrelated to those involved in tryptophan biosynthesis: triosephosphate isomerase, ribulose-1,5-bisphosphate carboxylase/oxygenase, glycolate oxidase, flavocytochrome b2, trimethylamine dehydrogenase, and tentatively also fructosebisphosphate aldolase.(ABSTRACT TRUNCATED AT 250 WORDS)

Aldose-Ketose Isomerases↗

Crystallization and structure solution at 4 A resolution of the recombinant synthase domain of N-(5'-phosphoribosyl)anthranilate isomerase:indole-3-glycerol-phosphate synthase from Escherichia coli complexed to a substrate analogue.

The recombinant synthase domain of the bifunctional enzyme N-(5'-phosphoribosyl)anthranilate isomerase:indole-3-glycerol-phosphate synthase from Escherichia coli has been crystallized, and the structure has been solved at 4 A resolution. Two closely related crystal forms grown from ammonium sulphate diffract to 2 A resolution. One form (space group R32, a = 163 A, alpha = 29.5 degrees) contains the unliganded synthase domain; the second crystal form (space group P6(3)22, a = 144 A, c = 158 A) is co-crystallized with the substrate analogue N-(5'-phosphoribit-1-yl)anthranilate. The structure of the synthase-inhibitor complex has been solved by the molecular replacement method. This achievement represents the first successful use of a (beta alpha)8-barrel monomer as a trial model. The recombinant synthase domain associates as a trimer in the crystal, the molecules being related by a pseudo-crystallographic triad. The interface contacts between the three domains are mediated by those residues that are also involved in the domain interface of the bifunctional enzyme. This system provides a model for an interface which is used in both intermolecular and intramolecular domain contacts.

Aldose-Ketose Isomerases↗

Amino acid sequence and three-dimensional structure of cytosolic adenylate kinase from carp muscle.

The amino acid sequence of cytosolic adenylate kinase from carp muscle has been determined. For the analysis of the blocked amino terminus an N-acylaminoacyl peptidase has been isolated and applied successfully. The resulting sequence is homologous to those of other adenylate kinases. It has 76% and 74% identical amino acids when compared with the enzymes from chicken and pig, respectively. The carp enzyme forms X-ray-grade crystals, the structure of which has been solved at 0.58-nm resolution. The observed chain fold is very similar to the known fold of the porcine enzyme in crystal form-A, whereas the molecular packing arrangements are quite different. This finding confirms that the observed porcine enzyme structure is intrinsically stable and has not been enforced during the crystallization process. The sequence of cytosolic adenylate kinase from carp muscle is: (table; see text)

Adenylate Kinase↗