Search PubMed⌕ Search

Biomedical subjects

M Taira

Publications and source records attributed to M Taira.

At least 181 records · Page 10Linked to original sources
PubMed1990

Structure of the rat PRPS1 gene encoding phosphoribosylpyrophosphate synthetase subunit I.

Phosphoribosylpyrophosphate (PP-Rib-P) synthetase (EC 2.7.6.1) subunit I gene (PRPS1) is constitutively expressed in various tissues (Taira, M., Iizasa, T., Yamada, K., Shimada, H., and Tatibana, M. (1989) Biochim. Biophys. Acta 1007, 203-208). We report here the exon-intron organization and the transcription promoter sequence of rat PRPS1 gene. This gene has 22 kilobases and is split into 7 exons ranging in size from 99 to 251 base pairs (bp), except for exon 7 (1008 bp). A putative PP-Rib-P binding site is encoded in exon 5. The exon-intron boundaries are similar to the consensus sequences for mammalian introns. S1 nuclease and primer extension assays with the use of RNA from rat Yoshida ascites sarcoma cells led to the identification of four possible transcription start points closely spaced between 126 and 129 bp from the ATG initiation codon. In the upstream region from the transcriptional start sites, we observed a TATA-like sequence (TAATTTAAT) at nucleotides -28, a CCAAT element (AGCCAATC) at nucleotides -80, and three GC boxes (putative Sp1-binding sites) at nucleotides -103, -43, and -10. A comparison of the promoter region for PRPS1 with those of other housekeeping genes revealed a homology resembling that of the beta-actin gene.

Actins↗
PubMed1990

Parietal cortex neurons of the monkey related to the visual guidance of hand movement.

A class of neurons specifically related to hand movements was studied in the posterior parietal cortex while the monkeys manipulated different types of objects. We examined the neuronal activity during manipulation of objects by the hand in the light and in the dark. Fifty-five neurons were active during manipulation in the dark and were classified as "hand-movement-related" neurons. Of these, 38/55 (69%) cells were also influenced by the visual stimulus. Most of the hand-movement-related neurons were selective in the type of objects manipulated. Moreover, some of these cells were selective in the axis of orientation of the object. These results suggest that the hand-movement-related neurons of the parietal cortex are concerned with the visual guidance of the hand movement, especially in matching the pattern of movement with the spatial characteristics of the object to be manipulated.

Animals↗
PubMed1990

Cu-Ti, Co-Ti and Ni-Ti systems: corrosion and microhardness.

Titanium alloys of 10 wt%-72 wt% Cu, 10 wt%-80 wt% Co and 20 wt%-84 wt% Ni were investigated. Ingots were fabricated in a vacuum/argon tungsten arc furnace. The surfaces of the alloys were examined by optical microscopy and SEM/EDS, and the Knoop hardness values of the alloys were measured. The corrosion resistance of the alloys was determined by a potentiodynamic polarization technique in buffered Ringer's solution. When a threshold composition of 30 wt% alloy was reached, a large decrease in corrosion resistance was found to occur. Knoop hardness measurements showed that similar hardness values of approximately 300 KHN can be obtained in all systems with lower alloy content. These values are similar to those obtained with a commercial dental titanium alloy.

Chemical Phenomena↗
PubMed1990

Dental cutting behaviour of mica-based and apatite-based machinable glass-ceramics.

Some recently developed industrial ceramics have excellent machinability properties. The objective of this study was to evaluate the dental cutting behaviour of two machinable glass-ceramics, mica-containing Macor-M and apatite- and diopside-containing Bioram-M, and to compare them with the cutting behaviour of a composite resin typodont tooth enamel and bovine enamel. Weight-load cutting tests were conducted, using a diamond point driven by an air-turbine handpiece, While the transverse load applied on the point was varied, the handpiece speed during cutting and the volume of removal upon cutting were measured. In general, an increase in the applied load caused a decrease in cutting speed and an increase in cutting volume. However, the intensity of this trend was found to differ between four workpieces. Cutting Macor-M resulted in the second-most reduced cutting speed and the maximum cutting volume. Cutting Bioram-M gave the least reduced cutting speed and the minimum cutting volume. It was suggested that two machinable glass-ceramics could be employed as typodont teeth. This study may also contribute to the development of new restorative dental ceramic materials, prepared by machining.

Aluminum Silicates↗
PubMed1990

Studies on fracture toughness of dental ceramics.

One important mechanical property of dental ceramics is fracture toughness, KIC, which represents the serviceability in the oral cavity, such as the resistance to marginal fracture. KIC values of several dental ceramics, natural tooth enamel and industrial ceramics were examined by use of the indentation microfracture (IM) method. This technique was based on the series of radial cracks emanating from the corners of the Vickers indentation. It was observed that appropriate load levels should be selected on each specimen to induce radial/median cracks. For feldspatic dental porcelains, larger loads of 10, 20 and 30 kg were needed to determine their KIC values in the range 1.5-2.1 MN.m-3/2. For natural tooth enamel and a new apatite-based castable glass-ceramic, a smaller force of 1 kg was sufficient to decide the respective KIC values of about 0.9 and 1.8 MN.m-3/2. The KIC values of most dental ceramics examined were slightly higher than that of soda lime glass, but less than one-third that of zirconia. It was confirmed that the IM method is simple and cost-effective for evaluation of KIC of dental ceramics.

Aluminum Silicates↗
PubMed1990

Effects of the diamond grit sizes of the commercial dental diamond points on the weight-load cutting of bovine enamel and glass-ceramic Typodont teeth.

To evaluate the effect of the diamond grit size of commercial dental diamond points on the dental cutting, we conducted weight-load cutting tests on bovine enamel and glass-ceramic typodont teeth using 3 different diamond grit sizes and air-bearing and ball-bearing air-turbine driven handpieces. With the transverse load applied on the diamond point varied between 20 and 80 g, we measured rotational cutting speed and cutting volume. Generally, increases in applied load caused decreases in rotational cutting speed and increases in cutting volume. The intensity of this trend, however, differed between grit sizes. Regular grit diamond points most strongly showed this tendency, while super-fine grit diamond points were least affected. Fine grit diamond points behaved in a manner similar to regular grit points.

Animals↗
PubMed1989

Elevation of c-myc transcript level in human liver during surgical resection of hepatocellular carcinoma: possible cause for underestimation of c-myc gene activation in the tumor.

It has been a matter of controversy as to whether c-myc gene expression is activated in human hepatocellular carcinoma (HCC). We observed that the c-myc mRNA level in HCC was similar to that of the adjacent non-cancerous portion, as determined in freshly obtained specimens after a partial liver resection. However, the c-myc transcript was at a low level in non-cancerous tissue which was biopsied prior to surgery, whereas it was still at a high level in HCC obtained without performing hepatectomy. These results suggest that the high transcript level observed in the non-cancerous tissue from the excised liver relates to liver resection itself, and that the c-myc gene expression is enhanced in the HCC.

Blotting, Northern↗
PubMed1989

Expression of c-myc oncogene in colorectal polyps as a biological marker for monitoring malignant potential.

The expression of oncogenes (c-myc, c-fos, c-Ki-ras, c-Ha-ras, and p53) was examined by Northern blot analysis using freshly isolated human colorectal and gastric cancers and noncancerous portions as the controls. Remarkably high levels of c-myc expression were found in colorectal cancers (eight of 11), but not in gastric cancers. High levels of c-myc expression were also detected in colorectal polyps and in metastatic liver tumors. In colorectal polyps, the transcript levels significantly correlated with the histologic malignancy and the size. In contrast, neither c-fos nor c-Ki-ras was overexpressed in colorectal and gastric cancers, and transcripts of c-Ha-ras and p53 were not evident in any tissue examined. In light of these observations the c-myc expression may be specifically associated with the evolution of colorectal cancer as well as progression and maintenance stages, hence may prove to be a useful marker to evaluate the malignant potential of colorectal polyps.

Adenocarcinoma↗
PubMed1989

Human diabetes associated with a deletion of the tyrosine kinase domain of the insulin receptor.

The insulin receptor has an intrinsic tyrosine kinase activity that is essential for signal transduction. A mutant insulin receptor gene lacking almost the entire kinase domain has been identified in an individual with type A insulin resistance and acanthosis nigricans. Insulin binding to the erythrocytes or cultured fibroblasts from this individual was normal. However receptor autophosphorylation and tyrosine kinase activity toward an exogenous substrate were reduced in partially purified insulin receptors from the proband's lymphocytes that had been transformed by Epstein-Barr virus. The insulin resistance associated with this mutated gene was inherited by the proband from her mother as an apparently autosomal dominant trait. Thus a deletion in one allele of the insulin receptor gene may be at least partly responsible for some instances of insulin-resistant diabetes.

Adolescent↗
PubMed1989

Tissue-differential expression of two distinct genes for phosphoribosyl pyrophosphate synthetase and existence of the testis-specific transcript.

Cloning of cDNA coding for rat phosphoribosyl pyrophosphate (PPRibP) synthetase (EC 2.7.6.1) revealed two distinct types of subunit, referred to as PRS I and PRS II (Taira et al. (1987) J. Biol. Chem. 262, 14867-14870). Tissue-specific expression of PRS I and PRS II genes (designated PRPS1 and PRPS2, respectively), was shown for 16 rat organs, using Northern blot analysis. The 2.3 kb PRPS1 mRNA level was high in the brain and adrenal gland, whereas the 3.7 kb PRPS2 mRNA level prevailed in the lung and spleen. Both genes were highly expressed in the thymus, adipose tissue and testis. In other mammals (mouse, calf and human), these two types of mRNA were also detected in various tissues and cell lines. Thus, the expression of each gene is regulated in a tissue-specific manner and there may be functional differences between catalytic and/or regulatory properties of subunits PRS I and II of this enzyme. In the testis, an additional PRPS1-related transcript of 1.4 kb was noted in rats, mice and humans. This transcript may belong to a group of testis-specific gene expressions or functions.

Animals↗