Search PubMed⌕ Search

Biomedical subjects

M T Hearn

Publications and source records attributed to M T Hearn.

At least 19 recordsLinked to original sources

Capillary electrochromatography analysis of hormonal cyclic and linear peptides.

The retention behavior of linear and cyclic peptides has been studied by capillary electrochromatography (CEC) with a variety of different n-alkyl silica reversed-phase sorbents and also with mixed-mode phases containing both strong cation-exchange (sulfonic acid) and n-alkyl groups bonded onto the silica surface, using eluents ranging from pH 2.0 to pH 5.0. Depending upon the amino acid sequence, electrochromatographic retention of the peptides was strongly affected by the composition of the eluent, its pH value, and the choice of sorbent packed into the capillaries. The dominant separation processes operating with these charged analytes could be modulated inter alia by the content of organic modifier, acetonitrile, in the eluent, with peptide resolution predominantly arising from electrophoretic migration processes at high acetonitrile content. As the concentration of acetonitrile was decreased, chromatographic retention processes became more pronounced. With the n-alkyl silica CEC columns used in this study, silanophilic interactions between the sorbents and the charged peptides could be suppressed by increasing the molarity of the buffer and by adjusting the pH of the eluent to lower values. On the other hand, electrostatic interactions between basic peptides and the surface of strong cation-exchanger, mixed-mode materials can be suppressed at low pH values by using higher ionic strength conditions in the eluent. Different selectivity behavior was achieved with desmopressin and the other peptides with Spherisorb C18/SCX and Hypersil mixed-mode materials when an identical eluent composition of 60% (v/v) acetonitrile with 7.6 mM triethylammonium phosphate, pH 3.0, was used. These findings confirm that the surface charge density of the sorbent fulfills an important role in the modulation of peptide selectivity in CEC. These studies also confirm that the dependency of the logarithm of the CEC retention coefficients, i.e., log Kcec, of a peptide separated with n-octadecyl silica sorbents under CEC conditions, on the volume fraction, psi, of the organic solvent modifier, acetonitrile, within the range of 0.20 < or = psi < or = 0.60, can be approximated by a linear relationship. Moreover, these studies show that the selectivity differences of peptides separated by CEC with nonpolar sorbents in packed capillary systems can be discussed in terms of semiempirical dependencies that link peptide retention behavior with their molecular descriptor properties, e.g., their hydrophobicity, surface charge anisotropy, surface area, molecular mass and intrinsic charge, and thus to their corresponding linear free energy relationships.

Chromatography, Micellar Electrokinetic Capillary↗

Synthesis of novel derivatives of 1,4,7-triazacyclononane.

[structure: see text]. The coordination environment of 1,4,7-triazacyclononane can be adapted, through sequential functionalization of two secondary amines, to generate ligands applicable in biomimetic studies. Two "amino acids" and an amino derivative have been prepared from 1,4,7-triazatricyclo[5.2.1.0(4,10)]decane. This synthon allows efficient attachment of one functional group to the macrocyclic ring, forming a monoamidinium salt. Hydrolysis generates a formyl derivative, which was further functionalized at the secondary amine and hydrolyzed in strong acid to generate ligands 1-3.

Journal Article↗

Microcalorimetric studies on the interaction mechanism between proteins and hydrophobic solid surfaces in hydrophobic interaction chromatography: effects of salts, hydrophobicity of the sorbent, and structure of the protein.

This study examines the effects of different salts as well as the influence of the relative hydrophobicities of different sorbents on the adsorption processes of proteins in hydrophobic interaction chromatography (HIC). Comparative data acquired by the equilibrium binding analysis and by isothermal titration microcalorimetry (ITC) are presented. In particular, thermodynamic parameters, including the enthalpy changes, related to the interactions between several globular proteins and various Toyopearl 650 M sorbents under solvent conditions containing either 2.0 M ammonium sulfate or 2.0 M sodium sulfate at pH 7.0 and 298.15 K have been evaluated in terms of the molecular properties of these systems. The results reveal that the dependence of the free energy change, deltaGads, for protein adsorption to HIC sorbents on the salt composition can be mainly attributed to the enthalpy changes associated with protein and sorbent dehydration and hydrophobic interactions. Differences in binding mechanisms between the n-butyl- and phenyl-HIC sorbents were evident. In the latter case, the participation of pi-pi hydrophobic interactions leads to significant differences in the associated enthalpy and entropy changes. Furthermore, an increase in the hydrophobicity of either the sorbent or the protein resulted in more negative values for the free energy change, which arose mostly from dehydration processes. Entropic effects favoring HIC adsorption increased with an increase in the exposed nonpolar surface area of the protein. Consequently, an increased contribution from the entropy change to the respective change in free energy occurs when HIC sorbents or proteins of higher hydrophobicity are employed, with these larger entropy changes consistent with a change in the interaction mechanism from a binding event dominated by adsorption to a partitioning-like process. Data extracted from the ITC measurements also provided insight into the interaction mechanisms that occur between proteins and hydrophobic solid surfaces, yielding information that can be applied to the HIC purification of proteins according to the concept of critical hydrophobicity of the system and its thermodynamic consequences.

Calorimetry↗

Electrochromatographic characterization of etched chemically-modified capillaries with small synthetic peptides.

In this investigation, various capillary electrochromatographic (CEC) experiments have been employed to characterize the properties of etched, chemically-modified surfaces of open tubular capillary columns with peptides as solute probes and under conditions of variable voltage, temperature and solvent composition. The separation performance of etched capillaries with either n-octadecyl or liquid crystal moieties derived from a cholesterol phase bonded to the surface were compared. With the liquid crystal bonded species, interesting and significantly different variations in retention behavior of peptides are obtained compared to those observed with the corresponding n-octadecyl modified surfaces by changes in temperature, solvent composition and field strength. These peptide separations illustrate the usefulness of this CEC approach for practical applications, where both the retention characteristics of the charged analytes as well as the selectivity differences due to the surface properties of the etched chemically-modified surfaces of open tubular capillary columns can be rationally modulated. As in HPLC, appropriate choice of CEC experimental variables, including the chemical properties of the immobilized ligand(s), represents a powerful tool for optimizing resolution.

Chromatography, Micellar Electrokinetic Capillary↗

Syntheses, crystal structures, magnetic properties, and EPR spectra of tetranuclear copper(II) complexes featuring pairs of "roof-shaped" Cu2X2 dimers with hydroxide, methoxide, and azide bridges.

Hydroxo- and methoxo-bridged tetranuclear copper(II) complexes of the tetramacrocyclic ligand 1,2,4,5-tetrakis(1,4,7-triazacyclonon-1-ylmethyl)benzene (Ldur), have been prepared from [Cu4Ldur(H2O)8](ClO4)8.9H2O (1). Addition of base to an aqueous solution of 1 gave [Cu4Ldur(mu2-OH)4](ClO4)4 (2). Diffusion of MeOH into a DMF solution of 2 produces [Cu4Ldur(mu2-OMe)4](ClO4)4.HClO4.2/3MeOH (3), a complex which hydrolyzes on exposure to moisture regenerating 2. The structurally related azido-bridged complex, [Cu4Ldur(mu2-N3)4](PF6)4.4H2O.6CH3CN (4), was produced by reaction of Ldur with 4 molar equiv of Cu(OAc)2.H2O and NaN3 in the presence of excess KPF6. Compounds 2-4 crystallize in the triclinic space group P1 (No. 2) with a = 10.248(1) A, b = 12.130(2) A, c = 14.353(2) A, alpha = 82.23(1) degrees, beta = 80.79(1) degrees, gamma = 65.71(1) degrees, and Z = 1 for 2, a = 10.2985(4) A, b = 12.1182(4) A, c = 13.9705(3) A, alpha = 89.978(2) degrees, beta = 82.038(2) degrees, gamma = 65.095(2) degrees, and Z = 1 for 3, and a = 12.059(2) A, b = 12.554(2) A, c = 14.051(2) A, alpha = 91.85(1) degrees, beta = 98.22(1) degrees, gamma = 105.62(1) degrees, and Z = 1 for 4. The complexes feature pairs of isolated dibridged copper(II) dimers with "roof-shaped" Cu2(mu2-X)2 cores (X = OH-, OMe-, N3-), as indicated by the dihedral angle between the two CuX2 planes (159 degrees for 2, 161 degrees for 3, and 153 degrees for 4). This leads to Cu.Cu distances of 2.940(4) A for 2, 2.962(1) A for 3, and 3.006(5) A for 4. Variable-temperature magnetic susceptibility measurements indicate weak antiferromagnetic coupling (J = -27 cm(-1)) for the hydroxo-bridged copper(II) centers in 2 and very strong antiferromagnetic coupling (J = -269 cm(-1)) for the methoxo-bridged copper(II) centers in 3. Pairs of copper(II) centers in 4 display the strongest ferromagnetic interaction (J = 94 cm(-1)) reported thus far for bis(mu2-1,1-azido)-bridged dicopper units. Spectral measurements on a neat powdered sample of 4 at 33.9 GHz or 90 Ghz confirm the spin-triplet ground state for the azido-bridged copper(II) pairs.

Journal Article↗

Total chemical synthesis of human activin beta(A)[12-116] and related large-loop polypeptides.

We report here the synthesis, purification, and characterization of several large polypeptides related to the human activin beta(A) subunit and their cyclic counterparts. In particular, we describe for the first time the total chemical synthesis of a 105-mer polypeptide, des[1-11] activin beta(A), and related large-loop polypeptide, by an optimized solid phase synthetic protocol based on 9-flouroenylmethyoxycarbonyl (Fmoc) chemistry. These studies show that automated chemical synthesis utilizing Fmoc-based solid phase synthetic strategies provides a practical alternative to recombinant DNA technology for the production of activin-related subunits, with the opportunity to rapidly provide different analogues and structural variants for subsequent structure-function and associated biophysical investigations.

Activins↗

Tpx-1 is a component of the outer dense fibers and acrosome of rat spermatozoa.

Previously we reported the cloning of a member of the cysteine-rich secretory protein family, tpx-1, from a testis expression library using an outer dense fiber (ODF)-specific antiserum. Using immunohistochemical and immunoelectron microscopic techniques and Western blotting of purified sperm tail components, we have determined that tpx-1 exists as 25 and 27 kDa proteins in two components of rat spermatid: the ODFs and the acrosome. Tpx-1 mRNA is first expressed in the late pachytene spermatocytes, but the production of these tpx-1 proteins is translationally delayed for 4-5 days before being incorporated into the developing sperm acrosome, surrounding the elongating and condensing spermatid nucleus. Concurrent with sperm head formation, tpx-1 protein was incorporated into the developing sperm tail, and specifically the ODFs. The tpx-1 protein was seen within structures resembling granulated bodies in the cytoplasmic lobe of elongating spermatids and was incorporated subsequently into the growing tail in a manner consistent with ODF development. In addition, tpx-1 protein was localized at the ultrastructural level of the connecting piece of the neck and longitudinal columns of the fibrous sheath, suggesting common protein components in these cytoskeletal structures. As such, tpx-1 may have functional significance in the processes of sperm head development and tail function.

Acrosome↗

Solid-phase synthesis of cyclic analogues related to the hypoglycaemic peptide hGH(6-13): comparison of two i-->i + 4 lactam cyclization procedures.

The use of 1,3-diisopropylcarbodiimide (DIC) for the synthesis of cyclic analogues of the hypoglycaemic peptide fragment derived from the N-terminus of human growth hormone (hGH), namely hGH[6-13], is described. Different strategies were examined to achieve improved yields for the on resin side-chain to side-chain cyclization of the corresponding linear peptides containing reverse beta-turn motifs. When compared with the more reactive Castro's reagent, the results confirm that DIC in the presence of HOBt can be successfully employed to minimize the formation of intermolecular oligomeric byproducts associated with the preparation of cyclic hGH[6-14] peptide analogues based on an i-->(i + 4)Lys-->Glu or Glu-->Lys cyclization strategy.

Amino Acid Sequence↗

The metal binding properties of the CCCH motif of the 50S ribosomal protein L36 from Thermus thermophilus.

The TthL36 protein of the 50S ribosomal proteins from Thermus thermophilus has been found to contain the rare C(Xaa)2C(Xaa)12C(Xaa)4H (CCCH) sequence motif, a zinc finger binding motif, which for other zinc finger proteins is known to cleave RNA hairpins. In order to investigate the metal-binding properties of this T. thermophilus TthL36 protein, the core 26-mer polypeptide containing this CCCH motif was prepared by solid-phase peptide synthesis methods using Fmoc chemistry, purified by preparative RP-HPLC and characterized by circular dichroism, high-performance capillary zone electrophoresis and electrospray ionization mass spectrometry. Reaction of the acetamidomethyl (Acm)-protected polypeptide with iodine under acidic conditions resulted in the formation of the fully de-protected polypeptide. Of interest, the results demonstrate that the standard Acm-deprotection method with the synthetic TthL36 polypeptide using mercuric acetate in the presence of a large excess of 2-mercaptoethanol resulted in preferential formation of a very stable mercuro-polypeptide complex. The properties of the Acm-deprotected polypeptide in the presence of different metal ions were also investigated by spectroscopic methods. The results confirm that this TthL36 polypeptide containing the CCCH motif binds metal ions with different affinities, namely in the order Co(II)>Hg(II)>Zn(II).

Amino Acid Motifs↗

Synthesis and application of peptide immunogens related to the sperm tail protein tpx-1, a member of the CRISP superfamily of proteins.

The synthesis of peptides containing 0, 1 and 2 cysteine residues related to the human sperm tail protein, tpx-1, is described. These synthetic peptides, following conjugation to keyhole limpet hemocyanin modified with maleimidobenzoic acid N-hydroxysuccinimide ester, were used as immunogens to generate polyclonal antibodies in female New Zealand white rabbits. The binding characteristics of the derived antipeptide sera were evaluated using indirect and competitive ELISA procedures. Western immunoblot experiments also confirmed that these synthetic peptide immunogens are able to generate high-titer polyclonal antibodies capable of cross-reacting with the mature tpx-1 protein present in crude rat sperm tail/testis preparations as well as in outer dense fiber preparations. Consequently, these synthetic peptides represent promising candidates for investigations into the role of tpx-1 in the immunoregulation of sperm function in the rat and other mammalian models, with the derived antisera also providing an avenue to explore possible sites of expression of tpx-1 proteins in other tissues.

Amino Acid Sequence↗

Influence of temperature on the behaviour of small linear peptides in capillary electrochromatography.

The influence of temperature, T, on the retention times, peak widths, peak symmetry coefficients and theoretical plate numbers of two small linear peptides, [Met5]enkephalin and [Leu5]enkephalin, has been studied with capillary electrochromatography (CEC) capillary columns of 100 microm I.D. and 250 mm packed length with a total length of 335 mm, containing 3 microm Hypersil n-octadecyl bonded silica. With increasing column temperature from 15 to 60 degrees C, the electroosmotic flow (EOF) and the column efficiencies increased, whereas the retention coefficients (Kcec) of both peptides decreased. A linear relationship was found between the EOF value and the square root of the temperature over this temperature range, with a linear regression correlation of 0.998. Non linear Van 't Hoff plots (In Kcec versus 1/T) were observed for these peptides between 15 and 60 degrees C, suggesting that a phase-transition occurred with the n-octadecyl chains bonded on the silica surface, affecting the CEC retention behaviour of these peptides. In CEC systems, the Kcec values of peptides incorporate contributions from both electrophoretic migration and chromatographic retention. Positive and negative Kcec values can, in principle, thus arise with these charged analytes. However, the Kcec values of the enkephalin peptides under all temperature conditions studied were positive with an eluent composed of water-50 mM NH4OAc/AcOH, pH 5.2-acetonitrile (5:2:3, v/v) and therefore the chromatographic component dominates the retention process with these small peptides under these conditions.

Chromatography, Micellar Electrokinetic Capillary↗

Isolation of thecal cells: an assessment of purity and steroidogenic potential.

In the present investigation, the responsiveness of rat thecal cells, prepared by means of an optimised discontinuous Percoll density gradient centrifugation procedure and cultured under serum-free cell culture conditions, to different concentrations of follitropin (FSH), basic fibroblast growth factor (FGF-2 or bFGF), and lutropin (LH) has been examined. The estradiol (E(2)) and progesterone (P(4)) contents of the cell culture medium were simultaneously determined with aliquots collected after different times of exposure to these regulatory proteins, either individually or in combination. The results confirm that no E(2) could be detected in the cell culture medium of the rat thecal cells prepared and cultured in this manner following all of these different treatments, and hence no contamination of the thecal cell preparations by granulosa cells was evident. The effects of FGF-2 and LH on the steroidogenic and cytodifferentiational properties of these rat thecal cells under serum-free cell culture procedures were also examined. The production of P(4) in the Percoll-purified rat thecal cell cultures receiving different treatments of FSH, and/or FGF-2 did not differ from the basal cell cultures, and no E(2) was detected from the same culture media. In contrast, LH (20 or 50 ng/ml) was found to enhance the production of P(4) (P<0.05) in the serum-free cell culture media. The stimulation of P(4) production was greater at higher LH concentration (50 ng/ml) (P<0.05). Concurrent treatment of LH (20 or 50 ng/ml) and FGF-2 (1-100 ng/ml) showed that FGF-2 inhibited the production of P(4) by LH-stimulated thecal cell cultures (P<0.05). The inhibition by FGF-2 was greater when LH was at a lower concentration (EC(50)<1 ng/ml at LH-20 ng/ml vs. EC(50)>1 ng/ml at LH-50 ng/ml). The results of the present study thus indicate that rat thecal cells isolated by this optimised Percoll density centrifugation procedure maintain a very high steroidogenic potential and specificity. Consistent with the absence of contaminating granulosa cells, these rat theca cell preparations do not respond to FSH treatment in terms of E(2) production. However, these rat theca cell preparations can be stimulated by LH to express their differentiated status in serum-free medium and respond to growth factors such as FGF-2.

Animals↗

Direct characterisation by electrospray ionisation mass spectroscopy of mercuro-polypeptide complexes after deprotection of acetamidomethyl groups from protected cysteine residues of synthetic polypeptides.

In this paper, we describe a rapid procedure to characterise the products generated in the presence of mercuric salts following removal of the acetamidomethyl (Acm)-protecting group from cysteine residues of synthetic polypeptides prepared by solid-phase peptide synthesis (SPPS) methods. In particular, electrospray ionisation mass spectrometry (ESI-MS) procedures have been employed to characterise the mercuro-polypeptide products related to the ribosomal L36 protein isolated from the bacterium Thermus thermophilus. The results demonstrate that very stable mercuro-polypeptide complexes can form under standard conditions of deprotection involving Hg(2+) salts in the presence of a reductant such as beta-mercaptoethanol. Metal ion exchange effects involving other divalent metal ions, such as Co(2+) or Zn(2+), can also be monitored by similar procedures, thus permitting the relative affinity and selectivity for metal ion-polypeptide interactions to be qualitatively assessed. Since the Thermus thermophilus ribosomal L36 protein contains a putative zinc finger binding CCCH motif, these procedures enable the formation of metal-ion complexes of synthetic polypeptides related to this structural motif to be directly examined.

Amino Acid Motifs↗

Adsorption and selectivity characteristics of several human serum proteins with immobilised hard Lewis metal ion-chelate adsorbents.

In this investigation, human serum has been used as an example of a crude protein mixture to define the protein binding characteristics and selectivity of several immobilised hard Lewis metal ion affinity chromatographic (IMAC) adsorbents. Specifically, the binding properties of immobilised O-phosphoserine (im-OPS) and 8-hydroxyquinoline (im-8-HQ), with immobilised iminodiacetic acid as a control system, have been investigated in combination with the hard Lewis metal ions, Al3+, Ca2+, Fe3+, Yb3+, and the borderline metal ion, Cu2+, over the pH range pH 5.5 to pH 8.0 with buffers of 0.5 M ionic strength. The same IMAC adsorbents were also investigated for their protein binding capabilities with buffers of an ionic strength of 0.06 M at pH 5.5 and pH 8.0. The binding behaviour of four "marker" proteins, namely transferrin, alpha2-macroglobulin, gammaglobulin and human serum albumin have furthermore been employed to monitor the differences in protein selectivity exhibited by these IMAC systems. The experimental findings confirm that these hard Lewis metal ion IMAC adsorbents function in a "mixed" binding mode with both coordination and electrostatic characteristics evident, depending on the ionic strength and pH of the equilibration or elution buffers. Based on a screening protocol, several members of the im-Mn+-8-HQ and im-Mn+-OPS adsorbent series have been identified with high selectivity for transferrin and alpha2-macroglobulin. These hard Lewis metal ion IMAC adsorbents thus provide attractive alternatives for selective fractionation of human serum proteins.

Blood Proteins↗

Capillary electroendoosmotic chromatography of peptides.

This review focuses on the current state of peptide separation by capillary electroendoosmotic chromatography (CEC). When carried out under optimised conditions, peptide separation by CEC methods represents an orthogonal and complementary technique to micro-HPLC (micro-HPLC) and high-performance capillary zone electrophoresis (HPCZE). The origin of the selectivity differences that can be achieved with these three separation techniques (CEC, micro-HPLC and HPCZE), respectively are discussed, and the current limits of performance with CEC methods documented. Peptide separations by CEC methods with n-alkyl bonded silicas or mixed-mode phases are also illustrated. The development of different variants of CEC and pressurised CEC (also commonly referred to in the literature as electrically-assisted micro-HPLC) are examined. The potential of coupling CEC systems to mass spectrometers for real-time analyses of peptides or protein digests has been examined. Several future directions for the application of this technique in phenotype/proteomic and zeomic mapping of naturally occurring peptides and proteins are highlighted.

Amino Acids↗

Determination of biophysical parameters of polypeptide retro-inverso isomers and their analogues by capillary electrophoresis.

The relationship between the electrophoretic mobility, microobs, Stokes radius, rs, ionization state, and solution conformation of the all L-alpha-polypeptide, 1, the corresponding retro-all D-alpha-polypeptide, 2, and several truncated analogues, 3-5, has been investigated under low pH buffer conditions by high-performance capillary zonal electrophoresis (HPCZE) with coated capillaries. The results confirm that, under these conditions, the all L-alpha-polypeptide, 1, and its retro-inverso isomer, 2, exhibit nonidentical electrophoretic mobilities and thus different Stokes radii. At higher pH values, i.e., pH 5.0, the electrophoretic behavior of this retro-inverso isomer pair, however, converges. These results indicate that variations in the dipole characteristics of the polypeptide main chain and subtle differences introduced by the spatial constraints of the L-alpha-Pro-->D-alpha-Pro residue replacement lead to differences in the Stokes radii and electrophoretic mobilities of these polypeptides. Since the observed electrophoretic mobilities, microobs, reflect the mean of the mobilities of each charge species participating according to their Stokes radius or their intrinsic charge and mole fraction abundances, the results confirm that polypeptide retro-inverso isomers with unmodified amino and carboxy termini are resolvable. This outcome was achieved despite their notional topographical and conformational similarities as assessed from high-field proton nuclear magnetic resonance (1H NMR) spectroscopy and circular dichroism (CD) spectroscopy.

Amino Acid Sequence↗

Coordination chemistry of a novel tetramacrocyclic ligand derived from 1,4,7-triazacyclononane: synthesis, structure, and properties of nickel(II) and copper(II) complexes.

A new polynucleating ligand, 1,2,4,5-tetrakis(1,4,7-triazacyclonon-1-ylmethyl)benzene (Ldur), has been prepared and characterized as its dodecahydrobromide salt. Addition of base to an aqueous solution of this salt and 4 molar equivalents (m.e.) of a Ni(II) salt produces a mixture of bi- and trinuclear complexes, which can be separated by cation-exchange chromatography (CEC) and crystallized as [Ni2Ldur](ClO4)(4).2H2O (1) and [Ni3Ldur(H2O)6](ClO4)(6).9H2O (2). The "full capacity" tetranuclear complex, [Ni4Ldur(H2O)12](ClO4)(8).8H2O (3), is obtained by slow addition of Ldur to a refluxing aqueous solution of excess Ni2+ ions, followed by CEC purification. Treatment of Ldur with 4 m.e. of a copper(II) salt produces exclusively the tetranuclear complex, [Cu4Ldur(H2O)8](ClO4)(8).9H2O (4), while reaction with only 2 m.e. of Cu2+ ions yields the binuclear complex, [Cu2Ldur](ClO4)(4).4H2O (5). The X-ray structures of complexes 1,2,4, and [Cu2Ldur](ClO4)(4).3H2O (5') have been determined; all are monoclinic, P2(1)/c: for 1, a = 9.497(3) A, b = 13.665(5) A, c = 19.355(6) A, beta = 100.57(2) degrees, V = 2469(1) A3, and Z = 2; for 2, a = 22.883(7) A, b = 15.131(6) A, c = 20.298(8) A, beta = 97.20(3) degrees, V = 6973(4) A3, and Z = 4; for 4, a = 16.713(7) A, b = 16.714(6) A, c = 14.775(11) A, beta = 108.24(5) degrees, V = 3920(4) A3, and Z = 2; and for 5', a = 9.5705(1) A, b = 13.0646(1) A, c = 20.1298(2) A, beta = 103.1618(8) degrees, V = 2450.81(4) A3, and Z = 2. The metal centers in 1 and 5' lie in distorted octahedral environments, each facially coordinated by two of the triamine rings of Ldur, the cation in each case being centrosymmetric. In 2, one of the nickel(II) centers is similarly sandwiched by two triamine rings, while the other two nickel(II) centers are each coordinated by a single triamine ring from the ligand, with their distorted octahedral coordination spheres each being completed by three water molecules. In 4, the four triamine rings of Ldur bind to separate copper(II) centers, with two water molecules occupying the remaining two sites of the distorted square pyramidal (SP) coordination spheres, the cation again being centrosymmetric.

Journal Article↗

Cloning and regulation of the rat activin betaE subunit.

Using a combination of polymerase chain reaction (PCR) procedures, we have cloned and sequenced the rat activin beta(E) subunit cDNA. The putative protein corresponding to the prepro-activin beta(E) subunit was predicted to comprise 350 amino acids which, when cleaved between amino acid residues 236 and 237, would yield a mature polypeptide of approximately M(r) 12 500 with a predicted pI of 5.1. Two cDNA transcripts for activin beta(E) were identified; these differed by 738 bp in the 3'-untranslated region. Activin beta(E) mRNA transcripts were expressed only in rat liver and lung tissue as assessed by Northern blotting and PCR analysis. Relatively higher levels of both transcripts were found in the liver, whereas the lung contained lower levels that were detectable by PCR only. In situ hybridisation data showed that, within the liver, activin beta(E) mRNA was localised to hepatocytes. In vivo treatment with lipopolysaccharide as a means of activating the immune system and the hepatic acute-phase response resulted in stimulated activin beta(E) mRNA levels, compared with untreated, control rats. This increased expression was accompanied by a preferential increase in the amount of the long activin beta(E) transcript over the shorter transcript. These findings suggested that the two activin beta(E) mRNA transcripts may be products of alternative splicing events or use alternative polyadenylation sites which are differentially regulated during inflammation. These data provide evidence of a role for activin beta(E) in liver function and inflammation in the rat.

Activins↗