Biomedical subjects

M Sittinger

Publications and source records attributed to M Sittinger.

At least 37 records · Page 2Linked to original sources

PubMed2000

Macroencapsulation of human cartilage implants: pilot study with polyelectrolyte complex membrane encapsulation.

Autogenous cartilage transplantation is a generally accepted method in reconstructive surgery. A promising alternative to this established method could be represented by in vitro engineering of cartilage tissue. In both methods of autogenous transplantation, host response induces reduction of transplant size and transplant instability to an unforeseeable extent. To investigate if polyelectrolyte complex (PEC) membranes were able to avoid host-induced effects on implanted tissues without neglecting the tissue metabolism, human septal cartilage was encapsulated with polyelectrolyte complex membranes and subcutaneously implanted on the back of nude mice. Septal cartilage implants, without encapsulation served as control group. Histochemical and electron microscopic investigations were performed 1, 4, 8 and 16 weeks after implantation. In the case of an intact PEC-membrane no interactions between the host and the implant could be observed. In some implants, the capsule was torn in several areas and signs of chronic inflammation with the cartilage having been affected mildly could be observed. Implanted cartilage protected with PEC-encapsulation showed no signs of degeneration and significantly lower level of after effects of chronic inflammation than implanted cartilage without PEC-encapsulation. Therefore, it could be expected, that PEC membrane encapsulation offers a novel approach to protect cartilage implants from host response after autogenous transplantation.

Animals↗

PubMed2000

Segmental bone repair by tissue-engineered periosteal cell transplants with bioresorbable fleece and fibrin scaffolds in rabbits.

The biological bone healing depends on the presence of osteochondral progenitors and their ability for proliferation. Isolated periosteal cells were seeded into biodegradable PGLA polymer fleece or fibrin beads and cultivated for 14 days after prior monolayer culture. On 12 New Zealand white rabbits 8 mm metadiaphyseal ulna defects were created bilaterally and subsequently filled with cell-fibrin beads, with polymers seeded with cells compared to controls with fibrin beads and polymers alone and untreated defects. A semiquantitative grading score was applied for histomorphological and radiological analysis after 28 days. Histologically intense bone formation was observed in both experimental groups with cell transplants only. The histological and radiological scoring was superior for both experimental groups. Control groups revealed only poor healing indices and untreated defects did not heal. The highest histological score was noted in the group with polymer fleeces containing periosteal cells. Applying the radiographic score system we determined a significant difference between experimental groups and controls without cells. The radiographic and histological scores for both experimental groups containing periosteal cells differed not significantly. The results strongly encourage the approach of the transplantation of pluripotent mesenchymal cells within a suitable carrier structure for the reconstruction of critical size bone defects.

Animals↗

PubMed2000

Tissue engineered cartilage repair using cryopreserved and noncryopreserved chondrocytes.

The objective of this study was to reconstruct full thickness cartilage defects in rabbit knees with in vitro engineered cartilage tissue based on noncryopreserved and cryopreserved chondrocytes in polymer fleece scaffolds. Osteochondral defects in rabbits were filled with polymer cylinders with noncryopreserved or cryopreserved allogeneic chondrocytes and compared with empty defects and defects filled with polymers alone. The defects were evaluated macroscopically and histologically 4 and 12 weeks after surgery. Transplant samples were graded using a semiquantitative score system. Successful healing was defined as complete integration of a hyalinelike and structurally intact cartilage into the defect and occurred in 71% of the group with noncryopreserved chondrocytes after 4 weeks and 100% of the rabbit knees after 12 weeks, whereas hyalinelike cartilage was seen in 71% of the group with cryopreserved chondrocytes after 4 weeks, and in 85% after 12 weeks. No newly formed cancellous bone was present in the subchondral bone. In the control groups, no cartilagelike tissue was seen. Transplantation of chondrocytes in polymer fleece constructs is a suitable approach for joint cartilage repair. Noncryopreserved chondrocytes are preferred to cryopreserved chondrocytes because of their regenerative potential. In vitro engineered cartilage offers broad opportunities for optimization of cartilage transplantation based on the controlled use of morphogenic and biologically active factors such as transforming growth factor-beta and bone morphogenetic proteins.

Animals↗

PubMed1999

Retention of hyaluronic acid in alginate beads: aspects for in vitro cartilage engineering.

Alginate has been used successfully for three-dimensional chondrocyte cultures and may be important for cartilage transplant formation. However, alginate is not a natural component of the cartilage matrix. The aim of this study was (a) to supplement alginate with the extracellular matrix component hyaluronic acid; and (b) to analyze the hyaluronic acid retention in different alginate gels. Hyaluronan is assumed to improve proteoglycan retention and may be important for in vitro matrix formation, tissue turgor, and biomechanical quality. Alginate and hyaluronan were mixed with chondrocytes and polymerized as were alginate, hyaluronan, and fibrinogen. [3H]hyaluronan was used to quantitate the leakage of hyaluronan from the gel beads. After 28 days in culture, 1.2% alginate beads supplemented with 0.26% hyaluronan contained only 9% of the initial amount of hyaluronan whereas 2.4% alginate beads still contained about 55% of the initial 0.22% hyaluronan. Release of hyaluronan from the beads was significantly lower if the beads additionally contained fibrin. Alginate beads supplemented with hyaluronan or fibrin showed increased chondrocyte proliferation compared to controls. Supplemented hyaluronan greatly diffuses out of alginate gels of lower densities. It must be assumed also that most of the hyaluronan newly synthesized by chondrocytes in these cells diffuses into the surrounding culture medium. The in vitro development of a sufficiently hygroscopic cartilage ground substance therefore may be very limited. Sufficient hyaluronic acid retention can be achieved in alginate gels with concentrations above 1.2% or by addition of fibrin.

Alginates↗

PubMed1999

Joint cartilage regeneration by tissue engineering.

The research field of tissue engineering combines cells biology, biomaterial science, and surgery. Major long-term goals are tissue and organ replacement therapies using the patients' own cells. Our work is focused on the treatment of severe joint defects and on plastic surgery using in vitro engineered cartilage tissues. The practical approaches in cartilage engineering face problems with three-dimensional cell distribution or cell immobilization raising biocompatibility problems. The tissue engineering of cartilage is based on combining biocompatible cell embedding substances such as fibrin, agarose, alginate, hyaluronic acid and fiber fleece scaffolds of poly alpha-hydroxy acids (PLLA/PGLA). Different technical approaches were established: a) three-dimensional in vitro cultures of chondrocytes for the development of vital tissue transplants and b) interacting three-dimensional cultures consisting of different cell populations, such as BMP-transfected mesenchymal cells. The preshaped artificial tissue constructs were cultured in perfusion chambers to maintain a stable diffusion of nutrients during the in vitro pre-formation step. Subsequently, pre-formed tissues were implanted into nude mice and into 4 mm articular joint defects of rabbits. Transplants were found to produce cartilage typic morphological patterns and matrix. 80% of the transplants remained stable in vivo. However, 20% of the tissues are resorbed or replaced by a fibrous tissue. These results demonstrate that current artificial cartilage transplants are already feasible for plastic reconstruction. The treatment of severe joint defects, however, faces additional problems which are addressed in ongoing studies: (a) the fixation of engineered cartilage in joints, (b) the protection against chronic inflammatory degradation, and (c) the required enormous mechanical stability.

Animals↗

PubMed1999

Tissue engineering of biphasic joint cartilage transplants.

In isolated posttraumatic or idiopathic joint defects the chondral layers and adjacent subchondral spongy bone are usually destructed. For regeneration we suggest the in vitro formation of a cartilage-coated biomaterial carriers (biphases) in order to fill the correspondingjoint defects. In this study Biocoral, a natural coralline material made of calcium carbonate, and calcite, a synthetic calcium carbonate, were used as supports for the cultivation of bovine chondrocytes in a three-dimensional polymer fleece. The cell-polymer-structure was affixed to the biomaterial with a fibrin-cell-solution. The artificial cartilage formed a new matrix and fused with the underlying biomaterial. The results indicate a promising technical approach to anchor tissue engineered cartilage in joint defects.

Animals↗

PubMed1999

Bone engineering on the basis of periosteal cells cultured in polymer fleeces.

Large bone defects caused by severe trauma, infection or tumor resection are still a major challenge for orthopaedic surgery. The key concept for successful bone regeneration consists of combining the osteoinductive effect of osteogenic cells with a suitable carrier structure to promote osteoblastic differentiation and optimal matrix production. Therefore, periosteal cells cultured in polyglycolic-polylactid acid (PGLA) fleeces were investigated for their osteogenic differentiation and used to repair critical size bone defects in a rabbit model. Periosteal cells were isolated from New Zealand White rabbits and expanded in vitro. Osteogenic differentiation was investigated by analysis of alkaline phosphatase and osteocalcin production in vitro depending on culture conditions and passage number. Cells were seeded into PGLA fleeces. After further cultivation, tissue constructs were examined histologically and by immunohistochemistry for cell distribution and osteogenic differentiation. These constructs of defined size were used to repair critical size calvarial defects (group I) in rabbits compared to a defect repair with polymers only (group II) or to untreated defects (group III). Bone healing was evaluated after 4 weeks by radiodensitometry and a special histological scoring system. For early evaluation, radiodensitometry was not sensitive enough to detect differences in calcification. However, on histologic examination the group with cell/fleece constructs revealed intense formation of uncalcified bone. The mean defect closure of the experimental group I was 65%, compared to control groups II and III with 31% and 22%, respectively. The established methods of 3-D-cell culture and ex-vivo transplant assessment proved to be a valuable tool for quality assurance. The results demonstrate that the combination of periosteal cells and polymer fleeces is a tissue engineering approach, which may have clinical applications in various fields of reconstructive surgery.

Journal Article↗

PubMed1999

A novel perfusion system for the endothelialisation of PTFE grafts under defined flow.

OBJECTIVES: to develop a perfusion system for culturing human endothelial cells on small-diameter PTFE grafts under defined pulsatile shear stress. METHODS: to benefit from a stronger adhesion of endothelial cells to the substrate, we developed a perfusion system which enables culture of endothelial cells on PTFE grafts to confluence under a wide range of shear stress. We also developed an in situ staining method for the determination of the endothelialisation stage by upper light microscopy. RESULTS: the application of pulsatile flow with high shear stress (6.6 dyn/cm2, 5 min) to a graft endothelialised under perfusion did not lead to a disruption of the confluent cell layer. In contrast, a shear stress of 3 dyn/cm2 applied for 5 min was sufficient to wash more than 50% of endothelial cells off the PTFE graft when cultured to confluence under static conditions. CONCLUSIONS: this technique induces a stronger cell adherence of endothelial cells to a PTFE graft in comparison with grafts endothelialised under static conditions. Endothelialised vascular grafts can be pre-conditioned to defined shear stress values.

Blood Vessel Prosthesis↗

PubMed1998

Cartilage reconstruction in head and neck surgery: comparison of resorbable polymer scaffolds for tissue engineering of human septal cartilage.

New cell culture techniques raise the possibility of creating cartilage in vitro with the help of tissue engineering. In this study, we compared two resorbable nonwoven cell scaffolds, a polyglycolic acid/poly-L-lactic acid (PGA/PLLA) (90/10) copolymer (Ethisorb) and pure PLLA (V 7-2), with different degradation characteristics in their aptitude for cartilage reconstruction. Chondrocytes were isolated enzymatically from human septal cartilage. The single cells were resuspended in agarose and transferred into the polymer scaffolds to create mechanical stability and retain the chondrocyte-specific phenotype. The cell-polymer constructs were then kept in perfusion culture for 1 week prior to subcutaneous transplantation into thymusaplastic nude mice. After 6, 12, and 24 weeks, the specimens were explanted and analyzed histochemically on the presence of collagen (azan staining), proteoglycans (Alcian blue staining), and calcification areas (von Kossa staining). Furthermore, different collagen types (collagen type I, which is found in most tissues, but not in hyaline cartilage matrix; and collagen type II, which is cartilage specific) were differentiated immunohistochemically by the indirect immunoperoxidase technique. Vascular ingrowth was investigated by a factor VIII antibody, which is a endothelial marker. Quantification of several matrix components was performed using the software Photoshop. Significant differences were found between both nonwoven structures concerning matrix synthesis and matrix quality as well as vascular ingrowth. Ethisorb, with a degradation time of approximately 3 weeks in vitro, showed no significant differences from normal human septal cartilage in the amount of collagen types I and II 24 weeks after transplantation. Thin fibrous tissue layers containing blood vessels encapsulated the transplants. V 7-2 constructs, which did not show strong signs of degradation even 24 weeks after transplantation, contained remarkably smaller amounts of cartilage-specific matrix components. At the same time, there was vascular ingrowth even in central parts of the transplants. In conclusion, polymer scaffolds with a short degradation time are suitable materials for the development of cartilage matrix products, while longer stability seems to inhibit matrix synthesis. Thus, in vitro engineering of human cartilage can result in a cartilage-like tissue when appropriate nonwovens are used. Therefore, this method could be the ideal cartilage replacement method without the risk of infection and with the possibility of reconstructing large defects with different configurations.

Adult↗

PubMed1998

Tissue engineering: generation of differentiated artificial tissues for biomedical applications.

A new field in biomedical science has been established. Cell biologists, engineers, and surgeons now work within a team. Artificial connective, epithelial, or neuronal tissues are being constructed using living cells and different kinds of biomaterials. Numerous companies and laboratories are presenting dynamic developments in this field. Prognoses predict that, at the beginning of the coming century, the industry of tissue engineering will reach the importance of the present genetic technology. An enormous demand for organ and tissue transplants motivates research activities and drives the acquisition of innovative techniques and creative solutions. At the front of this development is the creation of artificial skin for severely burned patients and the generation of artificial cartilage for implantation in articular joint diseases. Future challenges are the construction of liver organoids and the development of an artificial kidney on the basis of cultured cells. In this paper we show strategies, needs, tools, and equipment for tissue engineering. The presupposition for all projects is the induction, development, and maintenance of differentiation within the tissue under in vitro conditions. As experiments in conventional culture dishes continued to fail, new cell and tissue culture methods had to be developed. Tissues are cultured under conditions as close as possible to their natural environment. To optimize adherence or embedding, cells are grown on novel tissue carriers and on individually selected biomatrices or scaffolds. The tissues are subsequently transferred into different types of containers for permanent perfusion with fresh culture medium. This guarantees constant nutrition of the developing tissue and prevents the accumulation of harmful metabolites. An organo-typical environment for epithelial cells, for example, is obtained in gradient containers, which are permanently superfused at the apical and basal sides with different media. Long term experiments result in cultured tissues in a quality thus far unreached.

Biomedical Engineering↗

PubMed1997

Development of in vitro model systems for destructive joint diseases: novel strategies for establishing inflammatory pannus.

OBJECTIVE: To establish a novel 3-dimensional (3-D) in vitro model for the investigation of destructive processes in rheumatoid arthritis (RA). METHODS: Two distinct culture systems were developed, consisting of RA synovial membrane and articular cartilage explants or interactive RA synovial cell/chondrocyte cultures embedded in 3-D fibrin matrices. The expression of proteolytic enzymes, chondrocyte matrix architecture, and matrix degradation parameters was analyzed by immunohistochemistry. RESULTS: Of 28 RA explant cultures, 16 displayed an invasion of synovial tissue into the cartilage explants, compared with 1 of 8 osteoarthritis explants. The expression of collagenase and vascular cell adhesion molecule 1 could be demonstrated at the cartilage-pannus junction. Of 20 interactive cell cultures, 18 revealed invasive behavior and remained vital for extended periods of time. CONCLUSION: The models presented allow us to study distinct aspects of destructive joint diseases under in vitro conditions that resemble human pathology. Moreover, our model is able to supplement animal experiments in basic research and drug testing.

Animals↗

PubMed1997

[Proliferative potential of nasal septum chondrocytes for in vitro culture of cartilage transplants].

BACKGROUND: Recent developments in the field of tissue engineering provide novel approaches in tissue repair and reconstructive surgery using the patients own cells. Isolated chondrocytes form new cartilage when seeded in appropriate scaffolds. Usually the number of cells from a cartilage biopsy is not sufficient. The present study investigates the potential of cell amplification of human nasal chondrocytes in monolayer culture. METHODS: Nasal cartilage cells from seven healthy patients with age between 16 and 60 years were enzymatically isolated with collagenase and hyaluronidase. Subsequently, cells were seeded in 75 cm2 culture flasks. After confluency, cultures were trypsinized, counted, and again seeded at a concentration of 5 x 10(4) cells/ml. Dulbecco's MEM supplemented with 10% FCS was used as culture medium. RESULTS: After enzymatic digest, an average of 5 x 10(5) cells per patient were isolated. At least 85% of the cells were vital. Within four to eight weeks, the cells number was increased 10(3) to 10(5) fold. No correlation between the proliferative activity and the age of the patient was observed in this study. DISCUSSION: The observed increase in cell number resembles about 10 to 20 cell doublings. Although the doubling time appears to be longer during the second month, no definite limit of proliferative activity was seen during the time of study. Proliferating chondrocytes in monolayer lose their tissue-specific phenotype. For the de novo formation of cartilage transplants, redifferentiation of the expanded cells has to be stimulated. CONCLUSION: This study shows that human nasal chondrocytes can be expanded sufficiently in monolayer for the engineering of autologous cartilage transplants.

Adolescent↗

PubMed1997

[Transplantation of in vitro cultured cartilage materials: characterization of matrix synthesis].

BACKGROUND: Recently a three-dimensional model for the formation of cartilage in vitro was developed. The aim of this study was to investigate the amount and quality of newly synthesized matrix after graftig in vitro engineered cartilage into athymic nude mice. MATERIAL AND METHODS: Group I received transplants consisting of human chondrocytes, agarose, and E 200 (a bioabsorbable polymer fleece that offers mechanical stability. Ethicon Inc). Group II received chondrocytes and agarose only. At intervals of six, 12, and 24 weeks after subcutaneous transplantation we used azan blue staining and antibodies against collagen type I, collagen type II, and chondroitin-4sulfate to characterize the matrix synthesis. A quantitative analysis was performed using the computer image analyzing software photoshop (Adobe Inc). RESULTS: In group I, the amounts of newly synthesized cartilage specific collagen type II and chondroitin-4 sulfate increased progressively. Twenty-four weeks after transplantation, these amounts were comparable to the original human cartilage from which the chondrocytes were derived. Collagen type I was detected only in small quantities in the periphery of the transplants. Gross examination revealed sufficient mechanical stability and unremarkable changes in size and form. In contrast to this, group II transplants showed markedly smaller amounts of cartilage specific matrix components as collagen type II and chondroitin-4 sulfate and at the same time greater amounts of collagen type I. It was found both in the periphery and in central parts of the transplants. There was a remarkable loss of volume in all transplants and mechanical stability was poor. CONCLUSIONS: The absorbable cell carrier E 200 not only offers mechanical stability to in vitro engineered cartilage but also had a positive effect on the development of cartilage in our experiments. In conclusion, in vitro engineered cartilage is a promising pathway for the replacement of cartilage defects.

Adolescent↗

PubMed1997

Artificial tissues in perfusion culture.

In the stagnant environment of traditional culture dishes it is difficult to generate long term experiments or artificial tissues from human cells. For this reason a perfusion culture system with a stable supply of nutrients was developed. Human chondrocytes were seeded three-dimensionally in resorbable polymer fleeces. The cell-polymer tissues were then mounted in newly developed containers (W.W. Minuth et al, Biotechniques, 1996) and continuously perfused by fresh medium for 40 days. Samples from the effluate were analyzed daily, and the pH of the medium and glucose concentration remained stable during this period. The lactid acid concentration increased from 0.17 mg/ml to 0.35 mg/ml, which was influenced by the degradation of the resorbable polymer fibers used as three dimensional support material for the cells. This perfusion system proved to be reliable especially in long term cultures. Any components in the culture medium of the cells could be monitored without disturbances as caused by manual medium replacement. These results suggest the described perfusion culture system to be a valuable and convenient tool for many applications in tissue engineering, especially in the generation of artificial connective tissue.

Adult↗

PubMed1996

Resorbable polyesters in cartilage engineering: affinity and biocompatibility of polymer fiber structures to chondrocytes.

The resorbable polymers polyglycolic acid (PGA) and polylactic acid (PLA) are gaining increasing importance in tissue engineering and cell transplantation. The present investigation was focused on the biocompatibility and cell retaining behavior of PGA/poly-L-lactide (PLLA) (90/10) and PLLA nonwoven structures for the in vitro development of chondrocyte-polymer constructs. The effect of the relevant monomers to chondrocytes was analyzed. Type II collagen and poly-L-lysine were compared to improve loading of PGA/PLLA and PLLA polymer nonwovens with chondrocytes. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetra-zoliumbrom ide (MTT) test was applied for quantification. At concentrations above 2 mg/mL, glycolic acid was more cytotoxic than lactic acid. As shown by pH equilibration, the cytotoxic effect is not due merely to the acidity of the alpha-hydroxy acids. Regarding the degradation products, glycolic acid, and L(+) lactic acid, nonwovens of PLLA are more biocompatible with chondrocytes than nonwovens of polyglycolide. Collagen type II and poly-L-lysine generally improved cell seeding on resorbable polymers in tissue engineering; however, their efficiency varies depending on the type of fiber structure.

Adult↗

PubMed1996

Monoclonal antibodies against human chondrocytes.

Cell-specific antigens are mainly found in cells or membrane surfaces rather than in the surrounding matrix. However, until now it was not possible to produce antibodies specific for cellular structures of chondrocytes. In 1989, Lance (Immunol. Lett. 21:63-73; 1989) first established specific monoclonal antibodies for human articular chondrocytes tested only by immunofluorescence. Studies describing the specificity of these five antibodies (HUMC 1-5) and their relevance for immunohistological analysis of cartilage tissue were not available until now. Therefore, the aim of the following study was to investigate the distribution of HUMC 1, 2, 3, 4, and 5 in mesenchymal cells in vivo and in vitro immunohistochemically. Further investigations concentrate on the localization of chondrocyte specific antigens using immunoelectron microscopy. Immunohistological studies showed positive immunostainings with all five antibodies in human chondrocytes in vivo and in vitro. A cross-reaction with human fibroblasts and osteoblasts for the antibodies HUMC 2 and HUMC 5 was observed. Furthermore, a parallel loss of immunoreactivity for HUMC 1, HUMC 3, and HUMC 4 was observed in cultured chondrocytes indicating that the specific antigens vanish during differentiation observed in vitro. Subsequent immunoblot analysis employing collagens as antigens did not show any reactivity. Using immunoelectron microscopy, gold particle labeling was observed in intracytoplasmatic vesicles of isolated chondrocytes. Our results indicate that HUMC 1, HUMC 3, and HUMC 4 are specific for cartilage cells and might be suitable for immunohistological analysis of different cartilage tissues and pathologically altered chondrocytes.

Antibodies, Monoclonal↗

PubMed1996

[Tissue engineering of human cartilage tissue for reconstructive surgery using biocompatible resorbable fibrin gel and polymer carriers].

Current practical approaches in cartilage engineering still face problems with three dimensional cell distribution or require components for cell immobilization, raising biocompatibility problems. In this study, we present a new model using cells cross-linked by fibrin within biocompatible resorbable polymers. Both components have been in clinical use for a long time. Immunohistochemical procedures showed that this model provides optimal requirements for in vitro cartilage production. Immunochemically, cartilage-specific extracellular components such as proteoglycan, chondroitin sulfate and collagen II were characterized. Histomorphological methods showed a mechanically stable tissue compound that lasted for at least 5 weeks. This model may be the first to provide all biocompatible requirements for in vitro production of autologous cartilage transplants for reconstructive surgery.

Biocompatible Materials↗

PubMed1996

Encapsulation of artificial tissues in polyelectrolyte complexes: preliminary studies.

The in vitro engineering of vital tissues from isolated cells requires primarily the synthesis of a new intercellular matrix. Structural components of the extracellular matrix are large molecules such as collagens and proteoglycans. To retain and accumulate new matrix molecules within three-dimensional cell cultures, chondrocyte-polymer constructs were encapsulated in polyelectrolyte complex membranes. Further, these membranes might also be relevant for other applications where cells or tissues have to be isolated from their environment by semipermeable structures.

Cells, Cultured↗