Search PubMed⌕ Search

Biomedical subjects

M Scheffler

Publications and source records attributed to M Scheffler.

At least 19 recordsLinked to original sources
PubMed2005

Jahn-Teller stabilization of a "polar" metal oxide surface: Fe3O4(001).

Using ab initio thermodynamics we compile a phase diagram for the surface of Fe3O4(001) as a function of temperature and oxygen pressures. A hitherto ignored polar termination with octahedral iron and oxygen forming a wavelike structure along the [110] direction is identified as the lowest energy configuration over a broad range of oxygen gas-phase conditions. This novel geometry is confirmed via x-ray diffraction analysis. The stabilization of the Fe3O4(001) surface goes together with dramatic changes in the electronic and magnetic properties, e.g., a half metal to metal transition.

Journal Article↗
PubMed2005

Structure determination of small vanadium clusters by density-functional theory in comparison with experimental far-infrared spectra.

The far-infrared vibrational spectra for charged vanadium clusters with sizes of 3-15 atoms have been measured using infrared multiple photon dissociation of Vn+Ar-->Vn(+)+Ar. Using density-functional theory calculations, we calculated the ground state energy and vibrational spectra for a large number of stable and metastable geometries of such clusters. Comparison of the calculated vibrational spectra with those obtained in the experiment allows us to deduce the cluster size specific atomic structures. In several cases, a unique atomic structure can be identified, while in other cases our calculations suggest the presence of multiple isomers.

Journal Article↗
PubMed2004

Atomic structure of the GaAs(001)-c(4x4) surface: first-principles evidence for diversity of heterodimer motifs.

The GaAs(001)-c(4x4) surface was studied using ab initio atomistic thermodynamics based on density-functional theory calculations. We demonstrate that in a range of stoichiometries, between those of the conventional three As-dimer and the new three Ga-As-dimer models, there exists a diversity of atomic structures featuring Ga-As heterodimers. These results fully explain the experimental scanning tunneling microscopy images and are likely to be relevant also to the c(4x4)-reconstructed (001) surfaces of other III-V semiconductors.

Journal Article↗
PubMed2004

Kinetic hindrance during the initial oxidation of Pd(100) at ambient pressures.

The oxidation of the Pd(100) surface at oxygen pressures in the 10(-6) to 10(3) mbar range and temperatures up to 1000 K has been studied in situ by surface x-ray diffraction (SXRD). The results provide direct structural information on the phases present in the surface region and on the kinetics of the oxide formation. Depending on the (T,p) environmental conditions, we observe either a thin (sqrt[5]xsqrt[5])R27 degrees surface oxide or the growth of a rough, poorly ordered bulk oxide film of PdO predominantly with (001) orientation. By either comparison to the surface phase diagram from first-principles atomistic thermodynamics or by explicit time-resolved measurements we identify a strong kinetic hindrance to the bulk oxide formation even at temperatures as high as 675 K.

Journal Article↗
PubMed2003

Non-arrhenius behavior of the island density in metal heteroepitaxy: Co on Cu(001).

We present a combined theoretical and experimental study of island nucleation and growth in the deposition of Co on Cu(001)-a prototype for understanding heteroepitaxial growth involving intermixing. Experimentally, ion scattering is employed. Using density-functional theory, we obtain energy barriers for the various elementary processes and incorporate these into a kinetic Monte Carlo program to simulate the heteroepitaxial growth. Both the simulations and the experiments show a unique N-shape dependence of the island density on temperature that stems from the interplay and competition of the different processes involved.

Journal Article↗
PubMed2003

Pharmacokinetics of thalidomide in patients with impaired renal function and while on and off dialysis.

There is a renewed interest in thalidomide for use in malignancies and systemic inflammatory diseases. Reduced renal function is not uncommon among patients with these disease states but the pharmacokinetics has not been fully investigated. The aim of this study was to investigate the pharmacokinetics of thalidomide in haemodialysis patients while on and off dialysis and in myeloma patients with varying degrees of renal function. Two studies were performed. To establish the pharmacokinetics of thalidomide in patients with mild to moderate renal failure, blood samples were taken over 12 weeks from 40 patients with multiple myeloma. A second study was performed in six patients with end-stage renal disease both on a non-dialysis day and before and during a haemodialysis session. Thalidomide concentration was determined by HPLC. A one-compartment open model with first-order absorption and elimination was used to fit total thalidomide concentration to population pharmacokinetics and statistical models using the NONMEM program. Clearance and volumes were slightly below 10 L h-1 and 1 L kg-1, respectively, in both patient groups. The inter- and intra-patient variability was low. Clearance was doubled during dialysis. There was no correlation between thalidomide clearance and renal function. In conclusion, the pharmacokinetics of thalidomide in patients with renal failure are very similar to values reported by others for patients with normal renal function. Although clearance during dialysis is doubled, thalidomide dose need not be changed for patients with decreased kidney function. There is also no need for a supplementary dose due to haemodialysis.

Adult↗
PubMed2002

Quantum Monte Carlo calculations of H2 dissociation on Si(001).

The dissociative adsorption of H2 on the Si(001) surface is theoretically investigated for several reaction pathways using quantum Monte Carlo methods. Our reaction energies and barriers are at large variance with those obtained with commonly used approximate exchange-correlation density functionals. Our results for adsorption support recent experimental findings, while, for desorption, the calculations give barriers in excess of the presently accepted experimental value, pinpointing the role of coverage effects and desorption from steps.

Journal Article↗
PubMed2002

Role of subsurface oxygen in oxide formation at transition metal surfaces.

We present a density-functional theory trend study addressing the incorporation of oxygen into the basal plane of the late 4d transition metals (TMs) from Ru to Ag. Occupation of subsurface sites is always connected with a significant distortion of the host lattice, rendering it initially less favorable than on-surface chemisorption. Penetration starts only after a critical coverage theta(c), which is lower for the softer metals towards the right of the TM series. The computed theta(c) are found to be very similar to those above which the bulk oxide phase becomes thermodynamically more stable, thus suggesting that the initial incorporation of O actuates the formation of a surface oxide on TM surfaces.

Journal Article↗
PubMed2002

Reaction-limited island nucleation in molecular beam epitaxy of compound semiconductors.

Kinetic Monte Carlo simulations on the basis of rates derived from density-functional calculations are used to investigate the atomic processes in molecular beam epitaxy of GaAs. This approach puts us in a position to describe island nucleation and growth in all relevant atomistic detail by bridging the gap in length and time scales between the mesoscopic scale of growth morphology and the atomic scale. We observe a nonmonotonic dependence of the island density on growth temperature related to a reversible surface reaction of As2 with Ga adatoms.

Journal Article↗
PubMed2001

Role of electronic correlation in the Si(100) reconstruction: a quantum Monte Carlo study.

Recent low-temperature scanning tunneling experiments have questioned the generally accepted picture of buckled silicon dimers as the ground state reconstruction of the Si(100) surface, undermining the ability of density functional theory to accurately describe electronic correlations at surfaces. We present quantum Monte Carlo calculations on large cluster models of the surface, and conclude that buckling remains energetically favorable even when the present-day best treatment of electronic correlation is employed. The implications for experimental interpretation are discussed.

Journal Article↗
PubMed2001

Atomic Structure of the Stoichiometric GaAs(114) Surface.

The stoichiometric GaAs(114) surface has been prepared using molecular beam epitaxy followed by annealing in ultrahigh vacuum. Based on in situ scanning tunneling microscopy measurements and first-principles electronic-structure calculations, we determine the surface reconstruction which we call alpha2(2x1). Contrary to what is expected for a high-index surface, it is surprisingly elementary. The (2x1) unit cell contains two As dimers and two rebonded Ga atoms. The surface energy is calculated as 53 meV/Å(2), which falls well within the range of low-index GaAs surface energies.

Journal Article↗
PubMed2000

GaAs(001) surface under conditions of low As pressure: evidence for a novel surface geometry

Using density-functional theory we identify a new low-energy structure for GaAs(001) in an As-poor environment. The discovered geometry is qualitatively different from the usual surface-dimer based reconstructions of III-V semiconductor (001) surfaces. The stability of the new structure, which has a c(8x2) periodicity, is explained in terms of bond saturation and favorable electrostatic interactions between surface atoms. Simulated scanning tunneling microscopy images are in good agreement with experimental data, and a low-energy electron diffraction analysis supports the theoretical prediction.

Journal Article↗
PubMed2000

Symmetric versus nonsymmetric structure of the phosphorus vacancy on InP(110).

The atomic and electronic structure of positively charged P vacancies on InP(110) surfaces is determined by combining scanning tunneling microscopy, photoelectron spectroscopy, and density-functional theory calculations. The vacancy exhibits a nonsymmetric rebonded atomic configuration with a charge transfer level 0.75+/-0.1 eV above the valence band maximum. The scanning tunneling microscopy (STM) images show only a time average of two degenerate geometries, due to a thermal flip motion between the mirror configurations. This leads to an apparently symmetric STM image, although the ground state atomic structure is nonsymmetric.

Journal Article↗
PubMed2000

Island nucleation in thin-film epitaxy: A first-principles investigation

We describe a theoretical study of the role of adsorbate interactions in island nucleation and growth, using Ag/Pt(111) heteroepitaxy as an example. From density-functional theory, we obtain the substrate-mediated Ag adatom pair interaction and we find that, past the short range, a repulsive ring is formed about the adatoms. The magnitude of the repulsion is comparable to the diffusion barrier. In kinetic Monte Carlo simulations, we find that the repulsive interactions lead to island densities over an order of magnitude larger than those predicted by nucleation theory and thus identify a severe limitation of its applicability.

Journal Article↗
PubMed2000

Effect of the environment on alpha-Al2O3 (0001) surface structures

We report that calculating the Gibbs free energy of the alpha-Al2O3 (0001) surfaces in equilibrium with a realistic environment containing both oxygen and hydrogen species is essential for obtaining theoretical predictions consistent with experimental observations. Using density-functional theory we find that even under conditions of high oxygen partial pressure the metal-terminated surface is surprisingly stable. An oxygen-terminated alpha-Al2O3 (0001) surface becomes stable only if hydrogen is present on the surface. In addition, including hydrogen on the surface resolves discrepancies between previous theoretical work and experimental results with respect to the magnitude and direction of surface relaxations.

Journal Article↗
PubMed1999

Self-Assembly of Trisoligonucleotidyls: The Case for Nano-Acetylene and Nano-Cyclobutadiene.

Rapid cooling is the recipe for the self-assembly of nanostructures from trisoligonucleotidyls, a novel class of branched oligonucleotides whose 3'-termini are connected by a trifunctional linker. The topology of the smallest complex is formally equivalent to the topology of acetylene, if a DNA double strand is envisioned as a C-C bond. The model of nano-acetylene is shown.

Journal Article↗
PubMed1999

Phonon- versus electron-mediated desorption and oxidation of CO on Ru(0001)

Heating of a ruthenium surface on which carbon monoxide and atomic oxygen are coadsorbed leads exclusively to desorption of carbon monoxide. In contrast, excitation with femtosecond infrared laser pulses enables also the formation of carbon dioxide. The desorption is caused by coupling of the adsorbate to the phonon bath of the ruthenium substrate, whereas the oxidation reaction is initiated by hot substrate electrons, as evidenced by the observed subpicosecond reaction dynamics and density functional calculations. The presence of this laser-induced reaction pathway allows elucidation of the microscopic mechanism and the dynamics of the carbon monoxide oxidation reaction.

Journal Article↗