Search PubMed⌕ Search

Biomedical subjects

M P Weiner

Publications and source records attributed to M P Weiner.

At least 19 recordsLinked to original sources
PubMed2001

Fluorescent microsphere-based readout technology for multiplexed human single nucleotide polymorphism analysis and bacterial identification.

Large-scale human genotyping requires technologies with a minimal number of steps, high accuracy, and the ability to automate at a reasonable cost. In this regard, we have developed a rapid, cost-effective readout method for single nucleotide polymorphism (SNP) genotyping that combines an easily automatable single-tube allele-specific primer extension (ASPE) with an efficient high throughput flow cytometric analysis performed on a Luminex 100 flow cytometer. This robust technique employs an ASPE reaction using PCR-derived target DNA containing the SNP and a pair of synthetic complementary capture probes that differ at their 3' end-nucleotide defining the alleles. Each capture probe has been synthesized to contain a unique 25-nucleotide identifying sequence (ZipCode) at its 5' end. An array of fluorescent microspheres, covalently coupled with complementary ZipCode sequences (cZipCodes), was hybridized to biotin-labeled ASPE reaction products, sequestering them for flow cytometric analysis. ASPE offers both an advantage of streamlining the SNP analysis protocol and an ability to perform multiplex SNP analysis on any mixture of allelic variants. All steps of the assay are simple additions of the solutions, incubations, and washes. This technique was used to assay 15 multiplexed SNPs on human chromosome 12 from 96 patients. Comparison of the microsphere-based ASPE assay results to gel-based oligonucleotide ligation assay (OLA) results showed 99.2% agreement in genotype assignments. In addition, the microsphere-based multiplex SNPs assay system was adapted for the identification of bacterial samples by both ASPE and single base chain extension (SBCE) assays. A series of probes designed for different variable sites of bacterial 16S rDNA permitted multiplex analysis and generated species- or genus-specific patterns. Seventeen bacterial species representing a broad range of gram-negative and gram-positive bacteria were analyzed within 16 variable sites of 16S rDNA sequence. The results were consistent with the published sequences and confirmed by direct DNA sequencing.

Alleles↗
PubMed2001

Flow cytometric platform for high-throughput single nucleotide polymorphism analysis.

We have developed a rapid, cost-effective, high-throughput readout for single nucleotide polymorphism (SNP) genotyping using flow cytometric analysis performed on a Luminex 100 flow cytometer. This robust technique employs a PCR-derived target DNA containing the SNP, a synthetic SNP-complementary ZipCode-bearing capture probe, a fluorescent reporter molecule, and a thermophilic DNA polymerase. An array of fluorescent microspheres, covalently coupled with complementary ZipCode sequences (cZipCodes), was hybridized to the reaction products and sequestered them for flow cytometric analysis. The single base chain extension (SBCE) reaction was used to assay 20 multiplexed SNPs for 633 patients in 96-well format. Comparison of the microsphere-based SBCE assay results to gel-based oligonucleotide ligation assay (OLA) results showed 99.3% agreement in genotype assignments. Substitution of direct-labeled R6G dideoxynucleotide with indirect-labeled phycoerythrin dideoxynucleotide enhanced signal five- to tenfold while maintaining low noise levels. A new assay based on allele-specific primer extension (ASPE) was validated on a set of 15 multiplexed SNPs for 96 patients. ASPE offers both the advantage of streamlining the SNP analysis protocol and the ability to perform multiplex SNP analysis on any mixture of allelic variants.

Flow Cytometry↗
PubMed2000

Substrate specificity of human collagenase 3 assessed using a phage-displayed peptide library.

The substrate specificity of human collagenase 3 (MMP-13), a member of the matrix metalloproteinase family, is investigated using a phage-displayed random hexapeptide library containing 2 x 10(8) independent recombinants. A total of 35 phage clones that express a peptide sequence that can be hydrolyzed by the recombinant catalytic domain of human collagenase 3 are identified. The translated DNA sequence of these clones reveals highly conserved putative P1, P2, P3 and P1', P2', and P3' subsites of the peptide substrates. Kinetic analysis of synthetic peptide substrates made from human collagenase 3 selected phage clones reveals that some of the substrates are highly active and selective. The most active substrate, 2, 4-dinitrophenyl-GPLGMRGL-NH(2) (CP), has a k(cat)/K(m) value of 4.22 x 10(6) m(-)(1) s(-)(1) for hydrolysis by collagenase 3. CP was synthesized as a consensus sequence deduced from the preferred subsites of the aligned 35 phage clones. Peptide substrate CP is 1300-, 11-, and 820-fold selective for human collagenase 3 over the MMPs stromelysin-1, gelatinase B, and collagenase 1, respectively. In addition, cleavage of CP is 37-fold faster than peptide NF derived from the major MMP-processing site in aggrecan. Phage display screening also selected five substrate sequences that share sequence homology with a major MMP cleavage sequence in aggrecan and seven substrate sequences that share sequence homology with the primary collagenase cleavage site of human type II collagen. In addition, putative cleavage sites similar to the consensus sequence are found in human type IV collagen. These findings support previous observations that human collagenase 3 can degrade aggrecan, type II and type IV collagens.

Blotting, Western↗
PubMed2000

Identification of the human Mnk2 gene (MKNK2) through protein interaction with estrogen receptor beta.

We have identified and characterized the human Mnk2 gene (HGMW-approved gene symbol MKNK2) through a yeast two-hybrid screen in which the Mnk2 protein interacted with the ligand-binding domain of estrogen receptor beta (ERbeta). Human Mnk2 is homologous to murine Mnk2 ( approximately 94% identical) and human Mnk1 (71% identical), both of which encode MAP kinase interacting kinases that are phosphorylated and activated by ERK1 and 2. This report presents a thorough genomic sequence analysis revealing that the human Mnk2 gene has two C-terminal splice variants, designated here as Mnk2a and Mnk2b. These two isoforms are identical over the first 385 amino acids of the coding sequence and differ only in the final exon which encodes an additional 80 residues for Mnk2a and 29 residues for Mnk2b. A more detailed biological analysis in yeast showed that the Mnk2 interaction was selective for ERbeta as opposed to ERalpha and that the interaction was specific to Mnk2b as opposed to Mnk2a or Mnk1. This pattern was reproduced in a mammalian two-hybrid system using a completely different set of fusion partners; and in both yeast and mammalian systems, the addition of estradiol decreased the interaction. While it remains unknown whether ERbeta is a substrate of Mnk2, the interaction of these two proteins is reminiscent of ERalpha and ribosomal S6 kinase (p90-RSK), another MAP kinase-regulated kinase homologous to Mnk2 that is known to phosphorylate ERalpha.

Amino Acid Sequence↗
PubMed2000

Multiplexed single nucleotide polymorphism genotyping by oligonucleotide ligation and flow cytometry.

BACKGROUND: We have developed a rapid, high throughput method for single nucleotide polymorphism (SNP) genotyping that employs an oligonucleotide ligation assay (OLA) and flow cytometric analysis of fluorescent microspheres. METHODS: A fluoresceinated oligonucleotide reporter sequence is added to a "capture" probe by OLA. Capture probes are designed to hybridize both to genomic "targets" amplified by polymerase chain reaction and to a separate complementary DNA sequence that has been coupled to a microsphere. These sequences on the capture probes are called "ZipCodes". The OLA-modified capture probes are hybridized to ZipCode complement-coupled microspheres. The use of microspheres with different ratios of red and orange fluorescence makes a multiplexed format possible where many SNPs may be analyzed in a single tube. Flow cytometric analysis of the microspheres simultaneously identifies both the microsphere type and the fluorescent green signal associated with the SNP genotype. RESULTS: Application of this methodology is demonstrated by the multiplexed genotyping of seven CEPH DNA samples for nine SNP markers located near the ApoE locus on chromosome 19. The microsphere-based SNP analysis agreed with genotyping by sequencing in all cases. CONCLUSIONS: Multiplexed SNP genotyping by OLA with flow cytometric analysis of fluorescent microspheres is an accurate and rapid method for the analysis of SNPs.

Chromosomes, Human, Pair 19↗
PubMed2000

A microsphere-based assay for multiplexed single nucleotide polymorphism analysis using single base chain extension.

A rapid, high throughput readout for single-nucleotide polymorphism (SNP) analysis was developed employing single base chain extension and cytometric analysis of an array of fluorescent microspheres. An array of fluorescent microspheres was coupled with uniquely identifying sequences, termed complementary ZipCodes (cZipCodes), which allowed for multiplexing possibilities. For a given assay, querying a polymorphic base involved extending an oligonucleotide containing both a ZipCode and a SNP-specific sequence with a DNA polymerase and a pair of fluoresceinated dideoxynucleotides. To capture the reaction products for analysis, the ZipCode portion of the oligonucleotide was hybridized with its cZipCodes on the microsphere. Flow cytometry was used for microsphere decoding and SNP typing by detecting the fluorescein label captured on the microspheres. In addition to multiplexing capability, the ZipCode system allows multiple sets of SNPs to be analyzed by a limited set of cZipCode-attached microspheres. A standard set of non-cross reactive ZipCodes was established experimentally and the accuracy of the system was validated by comparison with genotypes determined by other technologies. From a total of 58 SNPs, 55 SNPs were successfully analyzed in the first pass using this assay format and all 181 genotypes across the 55 SNPs were correct. These data demonstrate that the microsphere-based single base chain extension (SBCE) method is a sensitive and reliable assay. It can be readily adapted to an automated, high-throughput genotyping system. [Primer sequences used in this study are available as online supplementary materials at www.genome.org.]

DNA, Complementary↗
PubMed2000

The admid system: generation of recombinant adenoviruses by Tn7-mediated transposition in E. coli.

A new system has been developed for generating recombinant adenoviruses by Tn7-mediated transposition in E. coli. Low copy number E. coli plasmids containing a full-length adenoviral genome with lacZattTn7 replacing E1 have been constructed. The adenovirus plasmid or admid, as well as high copy number progenitors, were stably maintained in E. coli strain DH10B. Several transfer vectors containing a mammalian expression cassette flanked by Tn7R and Tn7L were used as donors to transpose the mini-Tn7 into the E1 region of the adenoviral genome. Transposed recombinant admids are readily identified by their beta-galactosidase phenotype. Transfection of admid DNA into producer cells resulted in the efficient production of infectious adenovirus. This easy-to-use, efficient system generates pure, clonal stocks of recombinant adenovirus without successive rounds of plaque purification.

Adenoviridae↗
PubMed1999

Automation of yeast two-hybrid screening.

We have developed an automated format for screening yeast two-hybrid libraries for protein-protein interactions. The format consists of a liquid array in which pooled library subsets of yeast, expressing up to 1000 different cDNAs, are mated to a yeast strain of the opposite mating type, expressing a protein of interest. Interactors are detected by a liquid assay for beta-galacsidase following prototrophic selection. The method is demonstrated by the detection of interactions between two encoded yeast RNA polymerase subunits in simulated libraries of varied complexity. To demonstrate its utility for large scale screening of complex cDNA libraries, two nuclear receptor ligand-binding domains were screened through two cDNA libraries arrayed in pooled subsets. Screening these libraries yielded clones which had previously been identified in traditional yeast two hybrid screens, as well as several new putative interacting proteins. The formatting of the cDNA library into pooled subsets lends itself to functional subtraction of the promiscuous positive class of interactor from the library. Also, the liquid arrayed format enables electronic handling of the data derived from interaction screening, which, together with the automated handling of samples, should promote large-scale proteome analysis.

Automation↗
PubMed1996

Vectors encoding alternative antibiotic resistance for use in the yeast two-hybrid system.

We have altered the antibiotic resistance of the reporter plasmids and the pJG4-5 activation-domain and pEG202 DNA binding-domain plasmids used in the Brent interaction trap/two-hybrid system. These plasmids were each previously ampicillin-resistant, resulting in an inefficient purification of any one plasmid from a yeast strain containing all three plasmids that constitute the complete interaction trap. By creating derivatives of each of these plasmids expressing either kanamycin or chloramphenicol resistance, along with the parent plasmids, we now have the option to use the interaction trap in yeast with three E. coli differentially selectable vectors. This will allow isolation of any one plasmid by purifying all of the interaction trap plasmids from yeast simultaneously and plating E. coli transformed with the plasmids onto the appropriate antibiotic plate to select the particular plasmid of interest.

Ampicillin Resistance↗
PubMed1994

Site-directed mutagenesis of double-stranded DNA by the polymerase chain reaction.

We have developed a facile procedure for rapid PCR-based site-directed mutagenesis of double-stranded DNA. Increasing the initial template concentration and decreasing the PCR cycles to 5-10 allows us to reduce the rate of undesired second-site mutations and dramatically increase the time savings. Following PCR, DpnI treatment is used to select against parental DNA molecules. The DpnI (target sequence 5'-Gm6ATC) is specific for methylated and hemimethylated DNA and is used to digest parental DNA and select for mutation-containing amplified DNA. DNA isolated from almost all common Escherichia coli strains is Dam methylated and therefore susceptible to DpnI digestion. Pfu DNA polymerase is used, prior to intramolecular ligation of the linear template, to remove any bases extended onto the 3' ends of the PCR product by Taq DNA polymerase. The recircularized vector DNA incorporating the desired mutations is transformed into E. coli. This method can be used independently of any host strain and vector.

Base Sequence↗
PubMed1994

Cloning and analysis of PCR-generated DNA fragments.

Methods are presented for the improved yield and analysis of blunt-ended cloning of PCR-generated DNA fragments. We show that Pfu DNA polymerase polishing of Taq DNA polymerase-generated fragments increases the yield and efficiency of cloning. Using a triple primer set consisting of two outside, asymmetrically distanced primers and one fragment-specific primer, both the presence and orientation of cloned inserts can be determined. Application of these methods allows the generation and cloning of a fragment in 1 day and the analysis of putative clones the next, thereby saving a substantial amount of both time and effort.

Base Sequence↗
PubMed1993

A method for the site-directed mono- and multi-mutagenesis of double-stranded DNA.

A general solid-phase method for the site-directed mutagenesis of double-stranded DNA (dsDNA) is described. Plasmid DNA is linearized using either a restriction endonuclease (ENase) or the RecA-assisted ENase or RecA-AC cleavage method. Alternatively, PCR may be used to generate linear dsDNA. One or both strands of the DNA is biotinylated and attached to a solid support, and the DNA strands are separated using 0.2 M NaOH. An extension oligodeoxyribonucleotide (oligo) and a single or multiple oligo(s) containing the desired mutation(s) are annealed to one of the bound DNA strands and used to initiate the synthesis of a complementary strand by a nonstrand-displacing DNA polymerase. The in vitro synthesized strand incorporating the desired alteration(s) is melted off of the support and recircularized using one of several types of bridging oligos, DNA ligase, and a DNA polymerase and transformed into the host. Greater than 90% mutagenic efficiency has been obtained using this method.

Base Sequence↗
PubMed1993

Directional cloning of blunt-ended PCR products.

A method that allows the directional cloning of blunt-ended polymerase chain reaction (PCR) fragments is described. One PCR primer must be 5' phosphorylated. Extra bases are not required on either PCR primer. A linearized vector is enzymatically processed to contain a single 5'-terminal phosphate. The monophosphorylated vector is amenable to recombinant-insertion during ligation when the fragment is in the correct orientation. Increased recombinant yield results from incubating the monophosphorylated vector with a restriction enzyme (SrfI) that relinearizes nonrecombinant plasmids during the ligation reaction.

Base Sequence↗