Search PubMed⌕ Search

Biomedical subjects

M Moneghini

Publications and source records attributed to M Moneghini.

13 recordsLinked to original sources
PubMed2003

Study of the solid state of carbamazepine after processing with gas anti-solvent technique.

The purpose of this study was to investigate the influence of supercritical CO2 processing on the physico-chemical properties of carbamazepine, a poorly soluble drug. The gas anti-solvent (GAS) technique was used to precipitate the drug from three different solvents (acetone, ethylacetate and dichloromethane) to study how they would affect the final product. The samples were analysed before and after treatment by scanning electron microscopy analysis and laser granulometry for possible changes in the habitus of the crystals. In addition, the solid state of the samples was studied by means of X-ray powder diffraction, differential scanning calorimetry, diffuse reflectance Fourier-transform infrared spectroscopy and hot stage microscopy. Finally, the in vitro dissolution tests were carried out. The solid state analysis of both samples untreated and treated with CO2, showed that the applied method caused a transition from the starting form III to the form I as well as determined a dramatic change of crystal morphology, resulting in needle-shaped crystals, regardless of the chosen solvent. In order to identify which process was responsible for the above results, carbamazepine was further precipitated from the same three solvents by traditional evaporation method (RV-samples). On the basis of this cross-testing, the solvents were found to be responsible for the reorganisation into a different polymorphic form, and the potential of the GAS process to produce micronic needle shaped particles, with an enhanced dissolution rate compared to the RV-carbamazepine, was ascertained.

Carbamazepine↗
PubMed2001

Processing of carbamazepine-PEG 4000 solid dispersions with supercritical carbon dioxide: preparation, characterisation, and in vitro dissolution.

The purpose of this study was to apply the attractive technique of the supercritical fluid to the preparation of solvent-free solid dispersions. In particular, the gas antisolvent crystallisation technique (GAS), using supercritical carbon dioxide as processing medium, has been considered to prepare an enhanced release dosage form for of the poorly soluble carbamazepine, employing PEG 4000 as a hydrophilic carrier. The physical characterisation of the systems using laser granulometer, powder X-ray diffraction, thermal analyses, and scanning electron microscopy was carried out in order to understand the influence of this technological process on the physical status of the drug. The results of the physical characterisation attested a substantial correspondence of the solid state of the drug before and after treatment with GAS technique, whereas a pronounced change in size and morphology of the drug crystals was noticed. The dramatic reduction of the dimensions and the better crystal shape, together with the presence of the hydrophilic polymer determined a remarkable enhancement of the in vitro drug dissolution rate.

Carbamazepine↗
PubMed2001

Melt pelletization in high shear mixer using a hydrophobic melt binder: influence of some apparatus and process variables.

The effects of process conditions and the apparatus variables on the granulometric characteristics of a formulation containing a hydrophobic binder (stearic acid), lactose and paracetamol prepared by melt pelletization process were investigated in a 10-litre high shear mixer. The factors under investigation were: impeller speed, massing time, type of impeller blades and presence of the deflector and their reciprocal interactions. Two granule characteristics were analysed: the percentage of aggregates larger than 3000 microm (Y(1)) and the yield of the 2000-microm pellet size fraction (Y(2)). In order to estimate simultaneously the above-mentioned factors, a particular experimental design was adopted, that allowed the reduction of the number of trials from 378 to 35 and took into consideration other uncontrolled factors with the aid of a block variable. Using the postulated model, we found the optimal operating conditions to minimize Y(1) and increase Y(2) by selecting the type of impeller, and by using an impeller speed lower than 300 rpm, a massing time of 8-9 min and by not using the deflector. Finally, the validity of the adopted strategy has been proved with an additional check point.

Acetaminophen↗
PubMed2000

Preparation in high-shear mixer of sustained-release pellets by melt pelletisation.

The preparation of sustained-release pellets by melt pelletisation was investigated in a 10-l high shear mixer and ternary mixtures containing stearic acid as a melting binder, anhydrous lactose as a filler and theophylline as a model drug. A translated Doehlert matrix was applied for the optimisation of process variables and quality control of pellets characteristics. After determination of size distribution, the pellets were characterised with scanning electron microscopy, X-ray photoelectron spectroscopy and porosimetric analysis. Finally, the in vitro release from every single size fraction was evaluated and the release mechanism was analysed. Since the drug release rate decreased when enhancing the pellet size fraction, the 2000-microm fraction, exhibiting a substantially zero-order release, was selected for further in vivo biovailability studies. These data demonstrated that pellets based on the combination of stearic acid and lactose can be used to formulate sustained release pellets for theophylline.

Adult↗
PubMed2000

Chitosan microspheres with hydrocortisone and hydrocortisone-hydroxypropyl-beta-cyclodextrin inclusion complex.

In the present study, an inclusion complex composed of hydrocortisone acetate (HC) and hydroxypropyl-beta-cyclodextrin (HPbetaCD) was prepared by the spray-drying method. HC alone, HC inclusion complex or HC with HPbetaCD as a physical mixture were incorporated into chitosan microspheres by spray-drying. The inclusion complex and microspheres were characterized by X-ray powder diffractometry and differential scanning calorimetry (DSC). Microspheres were studied with respect to particle size distribution, drug content and in vitro drug release. The results indicate that the HCHPbetaCD inclusion complex is more water soluble than HC alone. The HC release rates from chitosan microspheres were influenced by the drug/polymer ratio in the manner that an increase in the release rate was observed when the drug loading was decreased. However, release data from all samples showed significant improvement of the dissolution rate for HC, with 25-40% of the drug being released in the first hour compared with about 5% for pure HC. The complexation method and microsphere preparation method (spray-drying) is simple with great potential for industrial production.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMed2000

Formulation and evaluation of vinylpyrrolidone/vinylacetate copolymer microspheres with carbamazepine.

Vinylpyrrolidone/vinylacetate copolymer (VP/VAc) was used for the enhancement of dissolution rate of carbamazepine, an antiepileptic drug characterized by very low water solubility. Microspheres containing different drug-to-polymer ratios were prepared using a solvent-evaporation technique and their physical characterizations were carried out by differential scanning calorimetry, x-ray diffractometry, and scanning electron microscopy. Through the solubilization kinetics and dissolution rates studies, the in vitro drug availability of the microspheres was evaluated. These results showed that the dissolution of carbamazepine in gastrointestinal fluids from all of the prepared formulations was increased with respect to the drug itself. However, the best dissolution parameters were obtained from 1:10 w/w system because of the presence of the drug in amorphous form and its efficient encapsulation.

Anticonvulsants↗
PubMed1999

Screening of high shear mixer melt granulation process variables using an asymmetrical factorial design.

The effects of process conditions on the granulometric characteristics of a placebo formulation prepared in a 10 l high shear mixer by single-step melt granulation were studied. The factors under investigation were: binder grade, mixer load, presence of the deflector (all of analysed at two levels), binder concentration, impeller speed, massing time, type of impeller blades (these four at three levels) and jacket temperature (considered at four levels). Two granule characteristics were analysed: the geometric mean diameter and the percentage of particles finer than 315 microm. In order to screen simultaneously the above-mentioned factor levels, an asymmetrical factorial design was adopted, which allowed the reduction in the number of runs from 2592 to 25. Additionally, this technique permitted the selection of the factor levels which have the major 'weight' on the two granule characteristics under study. Two additional trials were performed to attest the screening validity.

Chemistry, Pharmaceutical↗
PubMed1989

[Ion pair HPLC determination of p-aminobenzoic acid as an impurity in procaine and procainamide hydrochlorides].

A simple, specific and sensitive high-performance liquid chromatographic method for the determination of p-amino benzoic acid (PABA) as impurity in procaine and procainamide hydrochlorides has been developed. The compounds were chromatographed on reversed phase C-18 using water-methanol-acetonitrile solvent system containing sodium lauryl sulphate ion-pair reagent.

4-Aminobenzoic Acid↗
PubMedDate not supplied

[Not Available].

Explore the source record for details and available documents.

History of Pharmacy↗