Biomedical subjects

M M Benning

Publications and source records attributed to M M Benning.

25 records · Page 2Linked to original sources

PubMed1994

Molecular structure of the oxidized high-potential iron-sulfur protein isolated from Ectothiorhodospira vacuolata.

The high-potential iron-sulfur protein (iso-form II) isolated from Ectothiorhodospira vacuolata has been crystallized and its three-dimensional structure determined by molecular replacement procedures and refined to 1.8-A resolution with a crystallographic R factor of 16.3%. Crystals employed in the investigation belonged to the space group C222(1) with unit cell dimensions of a = 58.4 A, b = 64.7 A, and c = 39.3 A and one molecule per asymmetric unit. Like those HiPIPs structurally characterized thus far, the E. vacuolata molecule contains mostly reverse turns that wrap around the iron-sulfur cluster with cysteine residues 34, 37, 51, and 65 ligating the metal center to the polypeptide chain. There are 57 ordered solvent molecules, most of which lie at the surface of the protein. Two of these water molecules play important structural roles by stabilizing the loops located between Asp 42 and Lys 57. The metal center binding pocket is decidedly hydrophobic with the closest solvent molecule being 6.9 A from S2 of the [4Fe-4S] cluster. The E. vacuolata HiPIP molecules pack in the crystalline lattice as dimers with their iron-sulfur centers approximately 17.5 A apart. On the basis of biochemical properties, it was anticipated that the E. vacuolata HiPIP would be structurally more similar to the HiPIP isolated from Ectothiorhodospira halophila than to the protein obtained from Chromatium vinosum. In fact, the E. vacuolata molecule is as structurally close to the C. vinosum HiPIP as it is to the E. halophila protein due to the presence of various insertions and deletions that disrupt local folding.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗

PubMed1993

Molecular structure of kanamycin nucleotidyltransferase determined to 3.0-A resolution.

Kanamycin nucleotidyltransferase, as originally isolated from Staphylococcus aureus, inactivates the antibiotic kanamycin by catalyzing the transfer of a nucleotidyl group from nucleoside triphosphates such as ATP to the 4'-hydroxyl group of the aminoglycoside. The molecular structure of the enzyme described here was determined by X-ray crystallographic analysis to a resolution of 3.0 A. Crystals employed in the investigation belonged to the space group P4(3)2(1)2 with unit cell dimensions of a = b = 78.9 A and c = 219.2 A. An electron density map phased with seven heavy-atom derivatives revealed that the molecules packed in the crystalline lattice as dimers exhibiting local 2-fold rotation axes. Subsequent symmetry averaging and solvent flattening improved the quality of the electron density such that it was possible to completely trace the 253 amino acid polypeptide chain. Each monomer is divided into two distinct structural domains: the N-terminal motif composed of residues Met 1-Glu 127 and the C-terminal half delineated by residues Ala 128-Phe 253. The N-terminal region is characterized by a five-stranded mixed beta-pleated sheet whereas the C-terminal domain contains five alpha-helices, four of which form an up-and-down alpha-helical bundle very similar to that observed in cytochrome c'. The two subunits wrap about one another to form an ellipsoid with a pronounced cleft that could easily accommodate the various aminoglycosides known to bind to the enzyme.

Amino Acid Sequence↗

PubMed1993

Three-dimensional structure of myosin subfragment-1: a molecular motor.

Directed movement is a characteristic of many living organisms and occurs as a result of the transformation of chemical energy into mechanical energy. Myosin is one of three families of molecular motors that are responsible for cellular motility. The three-dimensional structure of the head portion of myosin, or subfragment-1, which contains both the actin and nucleotide binding sites, is described. This structure of a molecular motor was determined by single crystal x-ray diffraction. The data provide a structural framework for understanding the molecular basis of motility.

Actins↗

PubMed1992

Crystallization, structure determination and least-squares refinement to 1.75 A resolution of the fatty-acid-binding protein isolated from Manduca sexta L.

The molecular structure of an insect fatty-acid-binding protein isolated from Manduca sexta L. has been determined and refined to a nominal resolution of 1.75 A. Crystals used in the investigation were grown from 1.6 M-ammonium sulfate solutions buffered at pH 4.5 with 50 mM-sodium succinate, and belonged to space group P2(1) with unit cell dimensions of a = 27.5 A, b = 71.0 A, c = 28.7 A and beta = 90.8 degrees. An electron density map, phased with four heavy-atom derivatives and calculated to 2.5 A resolution, allowed for complete tracing of the 131 amino acid residue polypeptide chain. Subsequent least-squares refinement of the model reduced the R-factor from 46.0% to 17.3% using all measured X-ray data from 30.0 A to 1.75 A. Approximately 92% of the amino acid residues fall into classical secondary structural elements including ten strands of anti-parallel beta-pleated sheet, two alpha-helices, one type I turn, three type II turns, four type II' turns and one type III turn. As in other fatty-acid-binding proteins, the overall molecular architecture of the insect molecule consists of ten strands of anti-parallel beta-pleated sheet forming two layers that are nearly orthogonal to one another. A helix-turn-helix motif at the N-terminal portion of the protein flanks one side of the up-and-down beta-barrel. The functional group of the fatty acid is within hydrogen-bonding distance of Gln39, Tyr129, Arg127 and a sulfate molecule, while the aliphatic portion of the ligand is surrounded by hydrophobic amino acid residues lining the beta-barrel. The binding of the carboxylic acid portion of the ligand is very similar to that observed in P2 myelin protein and the murine adipocyte lipid-binding protein, but the positioning of the hydrocarbon tail after approximately C6 is completely different.

Animals↗

PubMed1991

Molecular structure of cytochrome c2 isolated from Rhodobacter capsulatus determined at 2.5 A resolution.

The molecular structure of the cytochrome c2, isolated from the purple photosynthetic bacterium Rhodobacter capsulatus, has been solved to a nominal resolution of 2.5 A and refined to a crystallographic R-factor of 16.8% for all observed X-ray data. Crystals used for this investigation belong to the space group R32 with two molecules in the asymmetric unit and unit cell dimensions of a = b = 100.03 A, c = 162.10 A as expressed in the hexagonal setting. An interpretable electron density map calculated at 2.5 A resolution was obtained by the combination of multiple isomorphous replacement with four heavy atom derivatives, molecular averaging and solvent flattening. At this stage of the structural analysis the electron densities corresponding to the side-chains are well ordered except for several surface lysine, glutamate and aspartate residues. Like other c-type cytochromes, the secondary structure of the protein consists of five alpha-helices forming a basket around the heme prosthetic group with one heme edge exposed to the solvent. The overall alpha-carbon trace of the molecule is very similar to that observed for the bacterial cytochrome c2, isolated from Rhodospirillum rubrum, with the exception of a loop, delineated by amino acid residues 21 to 32, that forms a two stranded beta-sheet-like motif in the Rb. capsulatus protein. As observed in the eukaryotic cytochrome c proteins, but not in the cytochrome c2 from Rsp. rubrum, there are two evolutionarily conserved solvent molecules buried within the heme binding pocket.

Amino Acid Sequence↗

PubMed1991

Crystallization and structure determination to 2.5-A resolution of the oxidized [2Fe-2S] ferredoxin isolated from Anabaena 7120.

The molecular structure of the oxidized form of the [2Fe-2S] ferredoxin isolated from the cyanobacterium Anabaena species strain PCC 7120 has been determined by X-ray diffraction analysis to a nominal resolution of 2.5 A and refined to a crystallographic R factor of 18.7%. Crystals used in this investigation belong to the space group P2(1)2(1)2(1) with unit cell dimensions of a = 37.42 A, b = 38.12 A, and c = 147.12 A and two molecules in the asymmetric unit. The three-dimensional structure of this ferredoxin was solved by a method that combined X-ray data from one isomorphous heavy-atom derivative with noncrystallographic symmetry averaging and solvent flattening. As in other plant-type [2Fe-2S] ferredoxins, the iron-sulfur cluster is located toward the outer edge of the molecule, and the irons are tetrahedrally coordinated by both inorganic sulfurs and sulfurs provided by protein cysteine residues. The main secondary structural elements include four strands of beta-pleated sheet and three alpha-helical regions.

Crystallization↗

PubMed1991

Molecular structure of an apolipoprotein determined at 2.5-A resolution.

The three-dimensional structure of an apolipoprotein isolated from the African migratory locust Locusta migratoria has been determined by X-ray analysis to a resolution of 2.5 A. The overall molecular architecture of this protein consists of five long alpha-helices connected by short loops. As predicted from amino acid sequence analyses, these helices are distinctly amphiphilic with the hydrophobic residues pointing in toward the interior of the protein and the hydrophilic side chains facing outward. The molecule falls into the general category of up-and-down alpha-helical bundles as previously observed, for example, in cytochrome c'. Although the structure shows the presence of five long amphiphilic alpha-helices, the alpha-helical moment and hydrophobicity of the entire molecule fall into the range found for normal globular proteins. Thus, in order for the amphiphilic helices to play a role in the binding of the protein to a lipid surface, there must be a structural reorganization of the protein which exposes the hydrophobic interior to the lipid surface. The three-dimensional motif of this apolipoprotein is compatible with a model in which the molecule binds to the lipid surface via a relatively nonpolar end and then spreads on the surface in such a way as to cause the hydrophobic side chains of the helices to come in contact with the lipid surface, the charged and polar residues to remain in contact with water, and the overall helical motif of the protein to be maintained.

Amino Acid Sequence↗