Search PubMed⌕ Search

Biomedical subjects

M L Giger

Publications and source records attributed to M L Giger.

At least 19 recordsLinked to original sources

Ideal observer approximation using Bayesian classification neural networks.

It is well understood that the optimal classification decision variable is the likelihood ratio or any monotonic transformation of the likelihood ratio. An automated classifier which maps from an input space to one of the likelihood ratio family of decision variables is an optimal classifier or "ideal observer." Artificial neural networks (ANNs) are frequently used as classifiers for many problems. In the limit of large training sample sizes, an ANN approximates a mapping function which is a monotonic transformation of the likelihood ratio, i.e., it estimates an ideal observer decision variable. A principal disadvantage of conventional ANNs is the potential over-parameterization of the mapping function which results in a poor approximation of an optimal mapping function for smaller training samples. Recently, Bayesian methods have been applied to ANNs in order to regularize training to improve the robustness of the classifier. The goal of training a Bayesian ANN with finite sample sizes is, as with unlimited data, to approximate the ideal observer. We have evaluated the accuracy of Bayesian ANN models of ideal observer decision variables as a function of the number of hidden units used, the signal-to-noise ratio of the data and the number of features or dimensionality of the data. We show that when enough training data are present, excess hidden units do not substantially degrade the accuracy of Bayesian ANNs. However, the minimum number of hidden units required to best model the optimal mapping function varies with the complexity of the data.

Bayes Theorem↗

Computerized analysis of multiple-mammographic views: potential usefulness of special view mammograms in computer-aided diagnosis.

PURPOSE: To investigate the potential usefulness of special view mammograms in the computer-aided diagnosis of mammographic breast lesions. MATERIALS AND METHODS: Previously, we developed a computerized method for the classification of mammographic mass lesions on standard-view mammograms, i.e., mediolateral oblique (MLO) view and/or cranial caudal (CC) views. In this study, we evaluate the performance of our computerized classification method on an independent database consisting of 70 cases (33 malignant and 37 benign cases), each having CC, MLO, and special view mammograms (spot compression or spot compression magnification views). The mass lesion identified in each of the three mammographic views was analyzed using our previously developed and trained computerized classification method. Performance in the task of distinguishing between malignant and benign lesions was evaluated using receiver operating characteristic analysis. On this independent database, we compared the performance of individual computer-extracted mammographic features, as well as the computer-estimated likelihood of malignancy, for the standard and special views. RESULTS: Computerized analysis of special view mammograms alone in the task of distinguishing between malignant and benign lesions yielded an Az of 0.95, which is significantly higher (p < 0.005) than that obtained from the MLO and CC views (Az values of 0.78 and 0.75, respectively). Use of only the special views correctly classified 19 of 33 benign cases (a specificity of 58%) at 100% sensitivity, whereas use of the CC and MLO views alone correctly classified 4 and 8 of 33 benign cases (specificities of 12% and 24%, respectively). In addition, we found that the average computer output of the three views (Az of 0.95) yielded a significantly better performance than did the maximum computer output from the mammographic views. CONCLUSIONS: Computerized analysis of special view mammograms provides an improved prediction of the benign versus malignant status of mammographic mass lesions.

Breast Neoplasms↗

Automatic segmentation of breast lesions on ultrasound.

In this paper we present a computationally efficient segmentation algorithm for breast masses on sonography that is based on maximizing a utility function over partition margins defined through gray-value thresholding of a preprocessed image. The performance of the segmentation algorithm is evaluated on a database of 400 cases in two ways. Of the 400 cases, 124 were complex cysts, 182 were benign solid lesions, and 94 were malignant lesions. In the first evaluation, the computer-delineated margins were compared to manually delineated margins. At an overlap threshold of 0.40, the segmentation algorithm correctly delineated 94% of the lesions. In the second evaluation, the performance of our computer-aided diagnosis method on the computer-delineated margins was compared to the performance of our method on the manually delineated margins. Round robin evaluation yielded Az values of 0.90 and 0.87 on the manually delineated margins and the computer-delineated margins, respectively, in the task of distinguishing between malignant and nonmalignant lesions.

Algorithms↗

Automated detection of lung nodules in CT scans: preliminary results.

We have developed a fully automated computerized method for the detection of lung nodules in helical computed tomography (CT) scans of the thorax. This method is based on two-dimensional and three-dimensional analyses of the image data acquired during diagnostic CT scans. Lung segmentation proceeds on a section-by-section basis to construct a segmented lung volume within which further analysis is performed. Multiple gray-level thresholds are applied to the segmented lung volume to create a series of thresholded lung volumes. An 18-point connectivity scheme is used to identify contiguous three-dimensional structures within each thresholded lung volume, and those structures that satisfy a volume criterion are selected as initial lung nodule candidates. Morphological and gray-level features are computed for each nodule candidate. After a rule-based approach is applied to greatly reduce the number of nodule candidates that corresponds to nonnodules, the features of remaining candidates are merged through linear discriminant analysis. The automated method was applied to a database of 43 diagnostic thoracic CT scans. Receiver operating characteristic (ROC) analysis was used to evaluate the ability of the classifier to differentiate nodule candidates that correspond to actual nodules from false-positive candidates. The area under the ROC curve for this categorization task attained a value of 0.90 during leave-one-out-by-case evaluation. The automated method yielded an overall nodule detection sensitivity of 70% with an average of 1.5 false-positive detections per section when applied to the complete 43-case database. A corresponding nodule detection sensitivity of 89% with an average of 1.3 false-positive detections per section was achieved with a subset of 20 cases that contained only one or two nodules per case.

Adult↗

Computer-aided detection and diagnosis of breast cancer.

The limitations of radiologists when interpreting mammogram examinations provides a reasonable, if not compelling, basis for application of computer techniques that have the potential to improve diagnostic performance. Computer algorithms, at their present state of development, show great promise for clinical use. It can be expected that such use will only improve as computer technology and computer methods continue to become more formidable. The eventual role of computers in mammographic detection and diagnosis has not been fully defined, but their effect on practice may one day be very significant.

Algorithms↗

Computerized classification of benign and malignant masses on digitized mammograms: a study of robustness.

RATIONALE AND OBJECTIVES: The purpose of this study was to evaluate the robustness of a computerized method developed for the classification of benign and malignant masses with respect to variations in both case mix and film digitization. MATERIALS AND METHODS: The classification method included automated segmentation of mass regions, automated feature-extraction, and automated lesion characterization. The method was evaluated independently with a 110-case database consisting of 50 malignant and 60 benign cases. Mammograms were digitized twice with two different digitizers (Konica and Lumisys). Performance of the method in differentiating benign from malignant masses was evaluated with receiver operating characteristic (ROC) analysis. Effects of variations in both case mix and film digitization on performance of the method also were assessed. RESULTS: Categorization of lesions as malignant or benign with an artificial neural network (or a hybrid) classifier achieved an area under the ROC curve, Az, value of 0.90 (0.94 for the hybrid) on the previous training database in a round-robin evaluation and Az values of 0.82 (0.81) and 0.81 (0.82) on the independent database for the Konica and Lumisys formats, respectively. These differences, however, were not statistically significant (P > .10). CONCLUSION: The computerized method for the classification of lesions on mammograms was robust with respect to variations in case mix and film digitization.

Breast Diseases↗

Automated registration of frontal and lateral radionuclide lung scans with digital chest radiographs.

RATIONALE AND OBJECTIVES: The purpose of this study was to develop and evaluate a fully automated method that spatially registers anterior, posterior, and lateral ventilation/perfusion (V/Q) images with posteroanterior and lateral digital chest radiographs to retrospectively combine the physiologic information contained in the V/Q scans with the anatomic detail in the chest radiographs. MATERIALS AND METHODS: Gray-level thresholding techniques were used to segment the aerated lung regions in the radiographic images. A variable-thresholding technique combined with an analysis of image noise was used to segment the adequately perfused or ventilated lung regions in the scintigraphic images. The physical dimensions of the segmented lung regions in images from both modalities were used to properly scale the radiographic images relative to the radionuclide images. Computer-determined locations of anatomic landmarks were then used to rotate and translate the images to achieve registration. Pairs of corresponding radionuclide and radiographic images were enhanced with color and then merged to create superimposed images. RESULTS: Five observers used a five-point rating scale to subjectively evaluate four image combinations for each of 50 cases. Of these ratings, 95.5% reflected very good, good, or fair registration. CONCLUSION: The automated method for the registration of radionuclide lung scans with digital chest radiographs to produce images that combine functional and structural information should benefit nuclear medicine physicians and radiologists, who must visually correlate images that differ greatly in physical size, resolution properties, and information content.

Female↗

Normalized BMD as a predictor of bone strength.

RATIONALE AND OBJECTIVES: In the noninvasive evaluation of bone quality, bone mineral density (BMD) has been shown to be the single most important predictor of bone strength and osteoporosis-related fracture. Among the methods of measuring BMD, dual x-ray absorptiometry (DXA) has widespread acceptance due to its low radiation, low cost, and high precision. However, DXA measures area BMD instead of true volumetric density; thus, a larger bone will tend to have a high BMD than will a smaller bone. Therefore, the comparison of BMDs of bones of different sizes can be misleading. In this study, the authors tried to compensate for the size effect by normalizing the area BMD with bone size as measured from a standard pelvic radiograph. MATERIALS AND METHODS: The overall method for calculation of normalized BMD included conventional area-based BMD from DXA and the extraction of geometric measures from pelvic radiographs. The database for analysis included 34 femoral neck specimens. Regression analysis was performed between the normalized volumetric BMD, measured from femoral neck region, and the mechanical properties obtained from trabecular bone cubes machined from the same region. RESULTS: After normalization of the area BMD, the coefficient of determination increased from 0.30 to 0.43 for the Young modulus and from 0.27 to 0.37 for bone compressive strength. CONCLUSION: A noninvasive method of normalizing BMD can improve the prediction of bone mechanical properties and has potential in monitoring changes in growing skeletons and in the clinical evaluation of bone quality.

Absorptiometry, Photon↗

Computerized analysis of mammographic parenchymal patterns for breast cancer risk assessment: feature selection.

Our purpose in this study was to identify computer-extracted, mammographic parenchymal patterns that are associated with breast cancer risk. We extracted 14 features from the central breast region on digitized mammograms to characterize the mammographic parenchymal patterns of women at different risk levels. Two different approaches were employed to relate these mammographic features to breast cancer risk. In one approach, the features were used to distinguish mammographic patterns seen in low-risk women from those who inherited a mutated form of the BRCA1/BRCA2 gene, which confers a very high risk of developing breast cancer. In another approach, the features were related to risk as determined from existing clinical models (Gail and Claus models), which use well-known epidemiological factors such as a woman's age, her family history of breast cancer, reproductive history, etc. Stepwise linear discriminant analysis was employed to identify features that were useful in differentiating between "low-risk" women and BRCA1/BRCA2-mutation carriers. Stepwise linear regression analysis was employed to identify useful features in predicting the risk, as estimated from the Gail and Claus models. Similar computer-extracted mammographic features were identified in the two approaches. Results show that women at high risk tend to have dense breasts and their mammographic patterns tend to be coarse and low in contrast.

BRCA2 Protein↗

Computerized analysis of radiographic bone patterns: effect of imaging conditions on performance.

We are developing computerized methods for characterizing the bone texture pattern from digitized skeletal radiographs. For this method to be useful clinically, it must be able to distinguish between weak and strong bone under the range of exposure conditions potentially encountered in the clinical setting. In this study, we examined the effect of exposure conditions on Fourier-based texture features. Thirty-four femoral specimens from total hip arthroplasties were radiographed multiple times under different exposure conditions. The specimens underwent mechanical strength testing from which load to failure values were obtained. The performance of the texture features were investigated in the task of distinguishing between strong and weak bone as characterized by the load to failure values. The texture features showed no dependence upon focal spot size of the x-ray tube or magnification. The texture features did show a dependence with relative exposure, peak kilovoltage, and amount of scattering material.

Biophysical Phenomena↗

Computerized analysis of abnormal asymmetry in digital chest radiographs: evaluation of potential utility.

The purpose of this study was to develop and test a computerized method for the fully automated analysis of abnormal asymmetry in digital posteroanterior (PA) chest radiographs. An automated lung segmentation method was used to identify the aerated lung regions in 600 chest radiographs. Minimal a priori lung morphology information was required for this gray-level thresholding-based segmentation. Consequently, segmentation was applicable to grossly abnormal cases. The relative areas of segmented right and left lung regions in each image were compared with the corresponding area distributions of normal images to determine the presence of abnormal asymmetry. Computerized diagnoses were compared with image ratings assigned by a radiologist. The ability of the automated method to distinguish normal from asymmetrically abnormal cases was evaluated by using receiver operating characteristic (ROC) analysis, which yielded an area under the ROC curve of 0.84. This automated method demonstrated promising performance in its ability to detect abnormal asymmetry in PA chest images. We believe this method could play a role in a picture archiving and communications (PACS) environment to immediately identify abnormal cases and to function as one component of a multifaceted computer-aided diagnostic scheme.

Databases as Topic↗

Improving breast cancer diagnosis with computer-aided diagnosis.

RATIONALE AND OBJECTIVES: The purpose of this study was to test whether computer-aided diagnosis (CAD) can improve radiologists' performance in breast cancer diagnosis. MATERIALS AND METHODS: The computer classification scheme used in this study estimates the likelihood of malignancy for clustered microcalcifications based on eight computer-extracted features obtained from standard-view mammograms. One hundred four histologically verified cases of microcalcifications (46 malignant, 58 benign) in a near-consecutive biopsy series were used in this study. Observer performance was measured on 10 radiologists who read the original standard- and magnification-view mammograms. The computer aid provided a percentage estimate of the likelihood of malignancy. Comparison was made between computer-aided performance and unaided (routine clinical) performance by using receiver operating characteristic (ROC) analysis and by comparing biopsy recommendations. RESULTS: The average ROC curve area (Az) increased from 0.61 without aid to 0.75 with the computer aid (P < .0001). On average, with the computer aid, each observer recommended 6.4 additional biopsies for cases with malignant lesions (P = .0006) and 6.0 fewer biopsies for cases with benign lesions (P = .003). This improvement corresponded to increases in sensitivity (from 73.5% to 87.4%), specificity (from 31.6% to 41.9%), and hypothetical positive biopsy yield (from 46% to 55%). CONCLUSION: CAD can be used to improve radiologists' performance in breast cancer diagnosis.

Area Under Curve↗

Computerized analysis of lesions in US images of the breast.

RATIONALE AND OBJECTIVES: Breast sonography is not routinely used to distinguish benign from malignant solid masses because of considerable overlap in their sonographic appearances. The purpose of this study was to investigate the computerized analyses of breast lesions in ultrasonographic (US) images in order to ultimately aid in the task of discriminating between malignant and benign lesions. MATERIALS AND METHODS: Features related to lesion margin, shape, homogeneity (texture), and posterior acoustic attenuation pattern in US images of the breast were extracted and calculated. The study database contained 184 digitized US images from 58 patients with 78 lesions. Benign lesions were confirmed at biopsy or cyst aspiration or with image interpretation alone; malignant lesions were confirmed at biopsy. Performance of the various individual features and output from linear discriminant analysis in distinguishing benign from malignant lesions was studied by using receiver operating characteristic (ROC) analysis. RESULTS: At ROC analysis, the feature characterizing the margin yielded Az values (area under the ROC curve) of 0.85 and 0.75 in distinguishing between benign and malignant lesions for the entire database and for an "equivocal" database, respectively. The equivocal database contained lesions that had been proved to be benign or malignant at cyst aspiration or biopsy. Linear discriminant analysis round-robin runs yielded Az values of 0.94 and 0.87 in distinguishing benign from malignant lesions for the entire database and for the equivocal database, respectively. CONCLUSION: Computerized analysis of US images has the potential to increase the specificity of breast sonography.

Adult↗

Effect of dominant features on neural network performance in the classification of mammographic lesions.

Two different classifiers, an artificial neural network (ANN) and a hybrid system (one step rule-based method followed by an artificial neural network) have been investigated to merge computer-extracted features in the task of differentiating between malignant and benign masses. A database consisting of 65 cases (38 malignant and 26 benign) was used in the study. A total of four computer-extracted features--spiculation, margin sharpness and two density-related measures--was used to characterize these masses. Results from our previous study showed that the hybrid system performed better than the ANN classifier. In our current study, to understand the difference between the two classifiers, we investigated their learning and decision-making processes by studying the relationships between the input features and the outputs. A correlation study showed that the outputs from the ANN-alone method correlated strongly with one of the input features (spiculation), yielding a correlation coefficient of 0.91, whereas the correlation coefficients (absolute value) for the other features ranged from 0.19 to 0.40. This strong correlation between the ANN output and spiculation measure indicates that the learning and decision-making processes of the ANN-alone method were dominated by the spiculation measure. Three-dimensional plots of the computer output as functions of the input features demonstrate that the ANN-alone method did not learn as effectively as the hybrid system in differentiating non-spiculated malignant masses from benign masses, thus resulting in an inferior performance at the high sensitivity levels. We found that with a limited database it is detrimental for an ANN to learn the significance of other features in the presence of a dominant feature. The hybrid system, which initially applied a rule concerning the value of the spiculation measure prior to employing an ANN, prevents over-learning from the dominant feature and performed better than the ANN-alone method in merging the computer-extracted features into a correct diagnosis regarding the malignancy of the masses.

Breast Diseases↗

Characterization of bone quality using computer-extracted radiographic features.

Both bone mineral density (BMD) and trabecular structure are important determinates of bone mechanical properties. However, neither BMD or trabecular structural features can completely explain the variations in bone mechanical properties. In this study, we combine BMD and bone structural features to characterize bone mechanical behavior. Radiographs were obtained from 34 femoral neck specimens excised during total hip arthroplasties. Each neck radiograph was digitized and a region of interest (ROI) was selected from the medial side of the femoral neck. Textural features, the global Minkoswski dimension and trabecular orientation, were extracted from each ROI image using Minkowski dimension analysis. The BMD of each specimen was measured using dual-energy x-ray absorptiometry (DXA) and subsequently normalized by bone size as measured from a standard pelvis radiograph. Mechanical testing was performed on the trabecular bone cubes machined from each femoral neck to yield bone mechanical properties. Multiple regression was performed to select the best features to predict bone mechanical properties. The results suggest that, using multiple predictors including normalized BMD structural features, and patient age, the coefficients of determination (R2) improved over the use of BMD alone. For bone strength, the R2 was improved from 0.24 using conventional BMD to 0.48 using a four-predictor model. Similar results were obtained in the prediction of Young's modulus, i.e., the R2 was improved from 0.25 to 0.55 in going from the model using conventional BMD to a four-predictor model. This study demonstrates the contributions of normalized BMD, structural features, and age to bone mechanical properties, and suggests a potential method for the noninvasive evaluation of bone mechanical properties.

Absorptiometry, Photon↗

Computerized radiographic texture measures for characterizing bone strength: a simulated clinical setup using femoral neck specimens.

We are investigating computerized methods to ultimately characterize bone trabecular pattern from clinical skeletal radiographs. In this paper, we present a "phantom" for potential use in the development and evaluation of computerized methods for characterizing radiographic trabecular patterns and ultimately bone strength. Femoral neck specimens were excised during total hip arthroplasties from subjects exhibiting a range of diseases. To mimic the femoral neck in vivo, a "simulated clinical" setup was implemented in which specimens were exposed under conditions that yielded radiographs similar in appearance to standard pelvis radiographs. Fourier-based and fractal-based texture measures were used in the computer analysis; including RMS variation, first moment of the power spectrum, angular-dependent forms of these measures, and fractal dimension. The texture measures obtained from the "simulated clinical" specimen films correlated modestly with those from direct exposure "verification" films of the specimens (r= 0.59-0.69; p<0.0001). From our study, we conclude that the femoral neck specimen "phantoms" may be useful in the development and evaluation of computerized methods for analyzing bone trabecular patterns from skeletal radiographs. The use of a phantom that simulates the clinical radiographic examination allows for repeat exposures without the concern of excessive radiation exposure to a patient.

Adult↗

Feature selection with limited datasets.

Computer-aided diagnosis has the potential of increasing diagnostic accuracy by providing a second reading to radiologists. In many computerized schemes, numerous features can be extracted to describe suspect image regions. A subset of these features is then employed in a data classifier to determine whether the suspect region is abnormal or normal. Different subsets of features will, in general, result in different classification performances. A feature selection method is often used to determine an "optimal" subset of features to use with a particular classifier. A classifier performance measure (such as the area under the receiver operating characteristic curve) must be incorporated into this feature selection process. With limited datasets, however, there is a distribution in the classifier performance measure for a given classifier and subset of features. In this paper, we investigate the variation in the selected subset of "optimal" features as compared with the true optimal subset of features caused by this distribution of classifier performance. We consider examples in which the probability that the optimal subset of features is selected can be analytically computed. We show the dependence of this probability on the dataset sample size, the total number of features from which to select, the number of features selected, and the performance of the true optimal subset. Once a subset of features has been selected, the parameters of the data classifier must be determined. We show that, with limited datasets and/or a large number of features from which to choose, bias is introduced if the classifier parameters are determined using the same data that were employed to select the "optimal" subset of features.

Bias↗