Search PubMed⌕ Search

Biomedical subjects

M L Bouxsein

Publications and source records attributed to M L Bouxsein.

At least 19 recordsLinked to original sources
PubMed2006

Contribution of the advanced glycation end product pentosidine and of maturation of type I collagen to compressive biomechanical properties of human lumbar vertebrae.

Collagen characteristics contribute to bone biomechanical properties. Yet, few studies have analyzed the independent contributions of bone mineral density (BMD) and post-translational modifications of type I collagen to whole bone strength. Thus, the aim of this study was to determine the relative contributions of BMD and both enzymatic and non-enzymatic collagen crosslink concentration to the biomechanical properties of human vertebrae. Nineteen L3 vertebrae were collected after necropsy (age 26-93; 10 males, 9 females). BMD of the vertebral body was measured by DXA, and the vertebrae were compressed to failure to assess the stiffness, failure load and work to fracture. After mechanical testing, the concentration of both enzymatic crosslinks pyridinoline (PYD), and deoxypyridinoline (DPD) as well as, and the non-enzymatic crosslinks pentosidine (PEN) were analyzed in trabecular and cortical bone by reversed-phase HPLC. The extent of aspartic acid isomerization of type I collagen C telopeptide (CTX) was evaluated by ELISA of native (alpha CTX) and isomerized (beta CTX) forms. BMD was significantly positively related with stiffness (R(2) = 0.74; P < 0.0001), failure load (R(2) = 0.69; P < 0.0001) and work to fracture (R(2) = 0.44; P = 0.002). Bivariate regression analysis showed no association between collagen traits and biomechanical properties. However, in a multiple regression model, BMD and trabecular PEN were both significantly associated with failure load and work to fracture (multiple R(2) = 0.83, P = 0.001 and R(2) = 0.67, P = 0.001, respectively). Similarly, BMD and trabecular alpha/beta CTX ratio were both associated with stiffness (multiple R(2) = 0.83, P = 0.015). These findings indicate that post-translational modifications of type I collagen have an impact on skeletal fragility.

Absorptiometry, Photon↗
PubMed2005

Bone response to intermittent parathyroid hormone is altered in mice null for {beta}-Arrestin2.

Intermittent PTH administration increases bone turnover, resulting in net anabolic effects on bone. These effects are primarily mediated by intracellular cAMP signaling. However, the molecular mechanisms that regulate PTH activity in bone remain incompletely understood. beta-Arrestin2, a G protein-coupled receptor regulatory protein, inhibits PTH-stimulated cAMP accumulation in vitro. Using beta-arrestin2(-/-) (KO) and wild-type (WT) mice, we investigated the response to PTH in primary osteoblasts (POB) and the effects of intermittent PTH administration on bone mass and microarchitecture in vivo. Compared with that in WT mice, PTH-stimulated intracellular cAMP was increased and sustained in KO POB. Intermittent exposure of POB to PTH significantly decreased the ratio of osteoprotegerin (OPG) receptor activator of nuclear factor-kappaB ligand (RANKL) mRNA expression in KO POB, whereas it increased this ratio in WT POB. Total body bone mass and cortical and trabecular bone parameters were 5-10% lower in male KO mice compared with WT, and these differences were magnified upon in vivo administration of intermittent PTH (80 mug/kg.d) for 1 month. Thus, PTH significantly increased total body bone mineral content as well as vertebral trabecular bone volume and thickness in WT, but not KO mice. The anabolic response to PTH in cortical bone was also slightly more pronounced in WT than KO mice. Histomorphometry indicated that PTH prominently stimulated indexes of bone formation in both WT and KO mice, whereas it significantly increased indexes of bone resorption (i.e. osteoclast number and surface) in KO mice only. In conclusion, these results suggest that beta-arrestins may specify the activity of intermittent PTH on the skeleton by limiting PTH-induced osteoclastogenesis.

Animals↗
PubMed2004

Adenoviral-mediated transfer of human BMP-6 gene accelerates healing in a rabbit ulnar osteotomy model.

This study evaluated healing of rabbit bilateral ulnar osteotomies 6 and 8 weeks after surgery in response to percutaneous injection of transgenic adenoviral (Ad) bone morphogenetic protein-6 (BMP-6) vector or green fluorescent protein vector control (Ad-GFP) administered 7 days after surgery compared to untreated osteotomy controls. The amount, composition and biomechanical properties of the healing bone repair tissue were compared among groups and to historical data for intact rabbit ulnae obtained from similar studies at the same institution. Quantitative computed tomography was used to determine area, density and mineral content of the mineralized callus in the harvested ulnae. Maximum torque, torsional stiffness, and energy absorbed to failure were determined at 1.5 degrees /s. Calcified sections of excised ulnae (5 microm) were stained with Goldner's Trichrome and Von Kossa, and evaluated for callus composition, maturity, cortical continuity, and osteotomy bridging. Radiographic assessment of bone formation indicated greater mineralized callus in the ulnae injected with Ad-hBMP-6 as early as 1 week after treatment (2 weeks after surgery) compared to untreated osteotomy ulnae (p < 0.006) and Ad-GFP treated osteotomy ulnae (p < 0.002). Quantitative computed tomography confirmed greater bone area and bone mineral content at the osteotomy at 6 weeks in Ad-BMP-6 treated osteotomy as compared to untreated osteotomy ulnae (p < 0.001) and Ad-GFP treated osteotomy ulnae (p < 0.01). Ad-BMP-6 treated osteotomy ulnae were stronger (p < 0.001 and 0.003) and stiffer (p < 0.004 and 0.003) in torsion at 6 weeks than untreated osteotomy ulnae or Ad-GFP treated osteotomy ulnae, respectively. Maximum torque, torsional stiffness, and energy absorbed to failure were greater in Ad-BMP-6 treated osteotomy ulnae compared to their respective untreated contralateral osteotomy ulnae at 8 weeks [p < 0.03]. Maximum torque and torsional stiffness in the Ad-BMP-6 treated osteotomy ulnae were not different to intact ulnae values at 6 and 8 weeks. These experiments confirm that BMP-6 can be potently osteoinductive in vivo resulting in acceleration of bone repair.

Adenoviridae↗
PubMed2003

Three-dimensional distribution of bone density in the proximal humerus.

Bone quality of the proximal humerus is important for the surgical treatment of proximal humeral fractures and rotator cuff tears. However, very few studies have evaluated the areal bone mineral density (BMD) of the proximal humerus. The aim of this study was to analyze the volumetric BMD (vBMD) using peripheral-quantitative-computed-tomography. Total, trabecular and cortical vBMD were determined separately for the proximal and distal half of the humeral head, the surgical neck and seven specific regions of interest. The greater tuberosity (GT) was divided into three regions, and the lesser tuberosity (LT) and articular surface (AS) were each divided into two regions. The proximal head showed a significantly higher trabecular (+ 46%) and cortical vBMD (+ 15%) than the distal one. The mean trabecular vBMD of AS was significantly higher (+ 80%), and the cortical vBMD was significantly lower (- 11%) than that of the tuberosities. In the proximal half of GT, trabecular vBMD was higher in the posterior than in the middle and anterior regions. Cortical vBMD was higher in middle region than in the anterior and posterior ones. In the distal half of GT, trabecular vBMD was significantly higher in the posterior than in the middle region, and cortical vBMD was significantly higher in the anterior than in the middle region. In one. These results point to bone sites that may provide stronger fixation for implants, reduce the risk of implant loosening, and therefore improve patient outcome.

Absorptiometry, Photon↗
PubMed2003

Congenic mice reveal sex-specific genetic regulation of femoral structure and strength.

Genetic linkage studies in C3H/HeJ (C3H) and C57BL/6J (B6) mice identified several chromosomal locations or quantitative trait loci (QTL) linked to femoral volumetric bone mineral density (vBMD). From QTL identified on chromosomes (chr) 1, 4, 6, 13, and 18, five congenic mouse strains were developed. In each of these mice, genomic DNA from the QTL region of the donor C3H strain was transferred into the recipient B6 strain. Here we report the effects of donated C3H QTL on femoral structure, cortical vBMD and bending strength. Femoral structure was quantified by the polar moment of inertia (Ip) at the mid-diaphysis, which reflects the bending or torsional rigidity of the femur. Although the C3H progenitor mice have a smaller Ip than B6 progenitor mice, the congenic mice carrying the C3H segment at Chr 4 had significantly increased Ip in both males and females, giving these mice stronger femora. In female mice from the congenic Chr 1 strain, Ip was increased whereas male mice from the Chr 1 strain had smaller femoral cross-sections and significantly reduced Ip. This sex-specific effect on femoral structure was seen to a lesser extent in Chr 18 congenic mice. In addition, cortical vBMD was measured using peripheral quantitative computed tomography. Cortical vBMD was similar among most congenic strains except in Chr 6 congenic mice, where cortical vBMD was significantly less in females, but not in males. We conclude that (1) chromosomal QTL from C3H mice, which are genetically linked to total femoral vBMD, also regulate femoral structure; (2) the QTL on Chr 4 improves femoral structure and strength; (3) QTL on Chr 1 and 18 impart sex-specific effects on femoral structure; and (4) the QTL on Chr 6 imparts a sex-specific effect on cortical vBMD and femoral strength.

Animals↗
PubMed2003

rhBMP-2 injected in a calcium phosphate paste (alpha-BSM) accelerates healing in the rabbit ulnar osteotomy model.

This study evaluated the ability of recombinant human bone morphogenetic protein-2 (rhBMP-2) delivered in an injectable calcium phosphate carrier (alpha-BSM) to accelerate healing in a rabbit ulna osteotomy model compared to untreated surgical controls. Healing was assessed by radiography, histology and biomechanics. Bilateral mid-ulnar osteotomies were created in 16 skeletally mature rabbits. One limb in each animal was injected with either 0.1 mg rhBMP-2/alpha-BSM (BMP) (N=8) or buffer/alpha-BSM (BSM) (N=8). Contralateral osteotomies served as untreated surgical controls (SXCT). Gamma scintigraphy showed 75%, 45% and 5% of the initial 125I-rhBMP-2 dose was retained at the osteotomy site at 3 h, 1 week and 3 weeks. The biological activity of rhBMP-2 (alkaline phosphatase activity from bioassay) extracted from alpha-BSM incubated in vitro up to 30 days at 37 degrees C was unchanged. Radiographs demonstrated complete bridging of the BMP limbs at 4 weeks whereas none of the BSM or SXCT limbs were bridged. Post-mortem peripheral quantitative computed tomography determined mineralized callus area was 62% greater in BMP limbs compared to SXCT limbs. Torsional stiffness and strength were 63% and 103% greater in BMP limbs compared to SXCT limbs. There was no difference in torsional properties between BSM and SXCT limbs. Failure occurred outside the osteotomy in four out of seven of the BMP limbs. All BSM and SXCT limbs failed through the osteotomy. Histology showed bony bridging of the osteotomy and no residual carrier in the BMP limbs. BSM and SXCT groups showed less mature calluses composed of primarily fibrocartilaginous tissue and immature bone in the osteotomy gap. These data indicate rhBMP-2 delivered in alpha-BSM accelerated healing in a rabbit ulna osteotomy model compared to BSM and SXCT groups.

Animals↗
PubMed2002

Digital X-ray radiogrammetry predicts hip, wrist and vertebral fracture risk in elderly women: a prospective analysis from the study of osteoporotic fractures.

Digital X-ray radiogrammetry (DXR) is a technique that uses automated image analysis of standard hand radiographs to estimate bone mineral density (DXR-BMD). Previous studies have shown that DXR-BMD measurements have high precision, are strongly correlated with forearm BMD and are lower in individuals with prevalent fractures. To determine whether DXR-BMD measurements predict wrist, hip and vertebral fracture risk we conducted a case-cohort study within a prospective study of 9704 community-dwelling elderly women (the Study of Osteoporotic Fractures). We compared DXR-BMD, and BMD of the radius (proximal and distal), calcaneus, femoral neck and posteroanterior lumbar spine in women who subsequently suffered a wrist (n = 192), hip (n = 195), or vertebral fracture (n = 193) with randomly selected controls from the same cohort (n = 392-398). DXR-BMD was estimated from hand radiographs acquired at the baseline visit. The radiographs were digitized and the Pronosco X-posure System was used to compute DXR-BMD from the second through fourth metacarpals. Wrist fractures were confirmed by radiographic reports and hip fractures were confirmed by radiographs. Vertebral fractures were defined using morphometric analysis of lateral spine radiographs acquired at baseline and an average of 3.7 years later. Age-adjusted odds ratio (OR, vertebral fracture) or relative hazard (RH, wrist and hip fracture) for a 1 SD decrease in BMD were computed. All BMD measurements were similar for prediction of wrist (RH = 1.5-2.1) and vertebral fracture (OR = 1.8-2.5). Femoral neck BMD best predicted hip fracture (RH = 3.0), while the relative hazards for all other BMD measurements were similar (RH = 1.5-1.9). These prospective data indicate that DXR-BMD performs as well as other peripheral BMD measurements for prediction of wrist, hip and vertebral fractures. Therefore, DXR-BMD may be useful for prediction of fracture risk in clinical settings where hip BMD is not available.

Absorptiometry, Photon↗
PubMed2002

Effect of temperature on ultrasonic properties of the calcaneus in situ.

To assess the dependence of calcaneal quantitative ultrasound (QUS) on foot temperature, a series of acoustic measurements were made in five cadaver feet in situ (all soft tissues retained) over a temperature range of 25 degrees C to 40 degrees C in steps of 5 degrees C. An implanted probe was used to measured temperature directly in the calcaneus itself. Ultrasound velocity decreased linearly with increasing temperature, with a mean thermal coefficient of -2.2 m/s/ degrees C. In contrast, broadband ultrasonic attenuation (BUA) increased with temperature with a mean thermal coefficient of +0.75 dB/MHz/ degrees C. We argue that the temperature trends in velocity are likely to be due to the influence of fat, present in the bone marrow and in the soft tissues, which has a negative thermal coefficient for acoustic velocity. The attenuation trends may arise, in part, from greater scattering losses inside the cancellous bone due to an increased acoustic impedance mismatch between trabeculae and fatty marrow at higher temperatures. These considerations suggest that the greatest temperature effects may be expected in patients with a high proportion of fat within the measured volume and/or low calcaneal bone density. Given the magnitude of the thermal coefficients observed, the clinical impact of temperature-related QUS errors is likely to be modest for diagnostic purposes but of greater significance in follow-up studies.

Aged↗
PubMed2002

Recombinant human bone morphogenetic protein-2 enhances osteotomy healing in glucocorticoid-treated rabbits.

The objectives of this study were to evaluate the effect of chronic prednisolone treatment on osteotomy healing in rabbits and to determine whether recombinant human bone morphogenetic protein-2 (rhBMP-2) would enhance healing in the presence of chronic glucocorticoid therapy. Forty-nine skeletally mature, male rabbits were injected with either prednisolone (n = 26; 0.35 mg/kg per day, three times a week) or saline (n = 23). After a 6-week pretreatment period, bilateral ulnar osteotomies were created surgically. One osteotomy was treated with rhBMP-2 (0.2 mg/ml of rhBMP-2, 40 microg of rhBMP-2 total) delivered on an absorbable collage sponge (ACS), whereas the contralateral osteotomy remained untreated. Prednisolone or saline treatment was continued until the rabbits were killed either 6 weeks or 8 weeks after creation of the osteotomy. Osteotomy healing was evaluated by radiography, peripheral quantitative computed tomography (pQCT), torsional biomechanics, and undecalcified histology. Because we observed similar responses to both prednisolone and rhBMP-2/ACS treatment in the 6-week and 8-week cohorts, the results from these time points were combined. Serum osteocalcin and vertebral trabecular bone density were lower in the prednisolone-treated rabbits. Prednisolone treatment dramatically inhibited osteotomy healing. In the untreated ulnas, callus area and torsional strength were 25% and 55% less, respectively, in the prednisolone-treated rabbits than in the saline group (p < 0.001 for both). rhBMP-2/ACS enhanced healing in both the prednisolone- and the saline-treated groups, although the effect was larger in the prednisolone-treated rabbits. In the prednisolone-treated rabbits, callus area and torsional strength were 40% and 165% greater (p < 0.001 for both), respectively, in osteotomies treated with rhBMP-2/ACS compared with the contralateral, untreated osteotomies. Histological evaluation confirmed that osteotomy healing was inhibited by prednisolone and accelerated by rhBMP-2/ACS. In summary, a single application of rhBMP-2/ACS counteracted the inhibition of osteotomy healing caused by prednisolone exposure. These results suggest that rhBMP-2/ACS may be a useful treatment for enhancing fracture healing in patients who are undergoing chronic glucocorticoid therapy.

Animals↗
PubMed2001

Variation in bone biomechanical properties, microstructure, and density in BXH recombinant inbred mice.

To test the hypothesis that factors associated with bone strength (i.e., volumetric bone mineral density [vBMD], geometry, and microstructure) have heritable components, we exploited the 12 BXH recombinant inbred (RI) strains of mice derived from C57BL/6J (B6; low bone mass) and C3H/HeJ (C3H; high bone mass) progenitor strains. The femurs and lumbar vertebrae from each BXH RI strain were characterized for phenotypes of vBMD, microstructural, biomechanical, and geometrical properties. Methods included bending (femur) and compression (vertebra) testing, peripheral quantitative computed tomography (pQCT), and microcomputed tomography (microCT). Segregation patterns of femoral and vertebral biomechanical properties among the BXH RI strains suggested polygenic regulation. Femoral biomechanical properties were strongly associated with femoral width in the anteroposterior (AP) direction and cortical thickness--geometric properties with complex genetic regulation. Vertebral vBMD and biomechanical properties measured in BXH RI strains showed a greater variability than either B6 or C3H progenitors, suggesting both progenitor strains have independent subsets of genes that yield similar vBMD and strength. The microCT and pQCT data suggested that the distribution of vertebral mineral into cortical and trabecular compartments is regulated genetically. Although the B6 and C3H progenitors had similar vertebral strength, their vertebral structures were markedly different: B6 had good trabecular bone structure and modest cortical bone mineral content (BMC), whereas C3H had high cortical BMC combined with a deficiency in trabecular structure. These structural traits segregated independently in the BXH RI strains. Finally, vertebral strength was not correlated consistently with femoral strength among the BXH RI strains, suggesting genetic regulation of bone strength is site specific.

Animals↗
PubMed2001

Recombinant human bone morphogenetic protein-2 accelerates healing in a rabbit ulnar osteotomy model.

BACKGROUND: Approximately 5% to 20% of fractures have delayed or impaired healing. Therefore, it is desirable to develop new therapies to enhance fracture-healing that can be used in conjunction with traditional treatment methods. The purpose of this study was to evaluate the ability of a single application of recombinant human bone morphogenetic protein-2 to accelerate fracture-healing in a rabbit ulnar osteotomy that heals spontaneously. METHODS: Bilateral mid-ulnar osteotomies (approximately 0.5 to 1.0 mm wide) were created in seventy-two skeletally mature male rabbits. The limbs were assigned to one of three groups: those treated with an absorbable collagen sponge containing recombinant human bone morphogenetic protein-2, those treated with an absorbable collagen sponge containing buffer, and those left untreated. In the first two groups, an 8 20-mm strip of absorbable collagen sponge containing either 40 g of recombinant human bone morphogenetic protein-2 or buffer only was wrapped around the osteotomy site. The rabbits were killed at two, three, four, or six weeks after surgery. In addition, twenty-four age-matched rabbits were used to provide data on the properties of intact limbs. The retention of recombinant human bone morphogenetic protein-2 at the osteotomy site was determined with scintigraphic imaging of (125)I-labeled recombinant human bone morphogenetic protein-2. After the rabbits were killed, the limbs were scanned with peripheral quantitative computed tomography to assess the area and mineral content of the mineralized callus. The limbs were then tested to failure in torsion, and undecalcified specimens were evaluated histologically. RESULTS: Gamma scintigraphy of (125)I-recombinant human bone morphogenetic protein-2 showed that 73% +/- 6% (mean and standard deviation) of the administered dose was initially retained at the fracture site. Approximately 37% +/- 10% of the initial dose remained at the site one week after surgery, and 8% +/- 7% remained after two weeks. The mineralized callus area was similar in all groups at two weeks, but it was 20% to 60% greater in the ulnae treated with recombinant human bone morphogenetic protein-2 than in either the ulnae treated with buffer or the untreated ulnae at three, four, and six weeks (p < 0.05). Biomechanical properties were similar in all groups at two weeks, but they were at least 80% greater in the ulnae treated with recombinant human bone morphogenetic protein-2 at three and four weeks than in either the ulnae treated with buffer (p < 0.005) or the untreated ulnae (p < 0.01). By four weeks, the biomechanical properties of the ulnae treated with recombinant human bone morphogenetic protein-2 were equivalent to those of the intact ulnae, whereas the biomechanical properties of both the ulnae treated with buffer and the untreated ulnae had reached only approximately 45% of those of the intact ulnae. At six weeks, the biomechanical properties were similar in all groups and were equivalent to those of the intact ulnae. The callus geometry and biomechanical properties of the ulnae treated with buffer were equivalent to those of the untreated ulnae at all time-points. CONCLUSIONS AND CLINICAL RELEVANCE: These findings indicate that treatment with an absorbable collagen sponge containing recombinant human bone morphogenetic protein-2 enhances healing of a long-bone osteotomy that heals spontaneously. Specifically, osteotomies treated with recombinant human bone morphogenetic protein-2 healed 33% faster than osteotomies left untreated. The results of this study provide a rationale for testing the ability of recombinant human bone morphogenetic protein-2 to accelerate healing in patients with fractures requiring open surgical management.

Animals↗
PubMed2000

Elderly cohort study subjects unable to return for follow-up have lower bone mass than those who can return.

Longitudinal studies of osteoporosis in older persons may underestimate bone loss because of a lack of follow-up measurements on subjects too frail to return. The authors addressed this possible bias as part of the population-based Framingham Study; in 1996-1997, they used quantitative ultrasound to assess the bone status of elderly subjects regardless of their ability to return to the clinic. Broadband ultrasound attenuation (BUA) and speed of sound of the calcaneus (heel) were measured in 433 subjects at the Framingham, Massachusetts, clinic and in 167 subjects at their homes or nursing homes. All ultrasound parameters were measured with intramachine coefficients of variation of <6.0%. The mean BUA for those subjects evaluated at the clinic was higher than for those measured at home (9.2% higher for men, p = 0.081; 8.6% higher for women, p = 0.034). After adjustment for age and weight, the differences in BUA were no longer significant. Among the elderly subjects participating in this longitudinal cohort study, those who were unable to return for follow-up were older, weighed less, and had a lower BUA than those who did return, suggesting that longitudinal studies of changes in bone mass with aging may underestimate the true population values.

Aged↗
PubMed2000

Scattering of ultrasound in cancellous bone: predictions from a theoretical model.

An understanding of the interaction between acoustic waves and cancellous bone is needed in order to realize the full clinical potential of ultrasonic bone measurements. Scattering is likely to be of central importance but has received little attention to date. In this study, we adopted a theoretical model from the literature in which scattering was assumed to be proportional to the mean fluctuation in sound speed, and bone was considered to be a random continuum containing identical scatterers. The model required knowledge only of sound speeds in bone and marrow, porosity, and scatter size. Predicted attenuation, broadband ultrasonic attenuation (BUA) and backscatter coefficient were obtained for a range of porosities and scatterer sizes, and were found to be comparable to published values for cancellous bone. Trends in predicted BUA with porosity agreed with previous experimental observations. All three predicted acoustic parameters showed a non-linear dependence on scatterer size which was independent of porosity. These data confirm the value of the scattering approach and provide the first quantitative predictions of the independent influence of structure and porosity on bone acoustic properties.

Bone and Bones↗
PubMed2000

Quantitative ultrasound does not reflect mechanically induced damage in human cancellous bone.

This study investigated the ability of quantitative ultrasound (QUS) to detect reductions in the elastic modulus of cancellous bone caused by mechanical damage. Ultrasonic velocity and attenuation were measured using an in-house parametric imaging system in 46 cancellous bone cores from the human calcaneus. Each core was subjected to a mechanical testing regime to (a) determine the predamage elastic modulus, (b) induce damage by applying specified strains in excess of the yield strain, and (c) measure the postdamage elastic modulus. The specimens were divided into four groups: a control group subjected to a nominally nondestructive 0.7% maximum strain (epsilonm) and three damage groups subjected to increasing strain levels (epsilonm = 1.5, 3.0, and 4.5%). QUS measurements before and after the mechanical testing showed no significant differences between the control group and damage groups, despite highly significant (p < 0.001) reductions in the elastic modulus of up to 72%. These results indicate that current QUS techniques do not intrinsically reflect the elastic properties of cancellous bone. This is consistent with ultrasonic properties being determined by other factors (apparent density and/or architecture), which normally are associated strongly with elastic properties, but only when bone is mechanically intact. Clinically, this implies that ultrasound cannot be expected to detect bone fragility in the absence of major changes in bone density and/or trabecular architecture.

Aged↗
PubMed2000

Genetic regulation of cortical and trabecular bone strength and microstructure in inbred strains of mice.

The inbred strains of mice C57BL/6J (B6) and C3H/HeJ (C3H) have very different femoral peak bone densities and may serve as models for studying the genetic regulation of bone mass. Our objective was to further define the bone biomechanics and microstructure of these two inbred strains. Microarchitecture of the proximal femur, femoral midshaft, and lumbar vertebrae were evaluated in three dimensions using microcomputed tomography (microCT) with an isotropic voxel size of 17 microm. Mineralization of the distal femur was determined using quantitative back-scatter electron (BSE) imaging. MicroCT images suggested that C3H mice had thicker femoral and vertebral cortices compared with B6. The C3H bone tissue also was more highly mineralized. However, C3H mice had few trabeculae in the vertebral bodies, femoral neck, and greater trochanter. The trabecular number (Tb.N) in the C3H vertebral bodies was about half of that in B6 vertebrae (2.8(-1) +/- 0.1 mm(-1) vs. 5.1(-1) +/- 0.2 mm(-1); p < 0.0001). The thick, more highly mineralized femoral cortex of C3H mice resulted in greater bending strength of the femoral diaphysis (62.1 +/- 1.2N vs. 27.4 +/- 0.5N, p < 0.0001). In contrast, strengths of the lumbar vertebra were not significantly different between inbred strains (p = 0.5), presumably because the thicker cortices were combined with inferior trabecular structure in the vertebrae of C3H mice. These results indicate that C3H mice benefit from alleles that enhance femoral strength but paradoxically are deficient in trabecular bone structure in the lumbar vertebrae.

Animals↗