Search PubMed⌕ Search

Biomedical subjects

M G Rossmann

Publications and source records attributed to M G Rossmann.

At least 145 records · Page 8Linked to original sources
PubMed1988

Preliminary X-ray crystallographic analysis of canine parvovirus crystals.

The first diffraction pattern of a crystalline single-stranded DNA virus has been obtained. Canine parvovirus was crystallized in a monoclinic P21 unit cell with a = 264.4 A, b = 350.3 A, c = 267.8 A and beta = 90.86 degrees (1 A = 0.1 nm). The diffraction pattern extends to at least 2.8 A resolution. Packing of the particles suggests that they have a diameter around 257 A, in excellent agreement with the reported molecular weight of 5.5 x 10(6).

Animals↗
PubMed1988

Prediction of three-dimensional models for foot-and-mouth disease virus and hepatitis A virus.

Atomic models of foot-and-mouth disease virus and hepatitis A virus have been predicted using amino acid sequence alignments with the known structures of Mengo virus and human rhinovirus 14. The structural models are consistent with results of biochemical and immunological studies. The two viruses appear to have surface features exceedingly different than those of other picornaviruses. They also have large hydrophobic cavities within VP1 suggesting that it may be possible to inhibit their infectivity with suitably designed antiviral agents that block uncoating.

Amino Acid Sequence↗
PubMed1988

Conservation of the putative receptor attachment site in picornaviruses.

A deep canyon or pit on the surfaces of human rhinovirus 14 and Mengo virus, respectively, has been proposed as a putative receptor binding site. Amino acids lining the surface of the canyon or pit have been identified and show greater conservation than other surface residues.

Antigens, Viral↗
PubMed1988

Enantiomeric effects of homologues of disoxaril on the inhibitory activity against human rhinovirus-14.

X-ray crystallography studies of racemic 5-[7-[4-(4,5-dihydro-4-methyl-2-oxazolyl)phenoxy]heptyl]- 3-methylisoxazole bound to human rhinovirus-14 (HRV-14) indicate selective binding of the S isomer. This result correlates well with the 10-fold greater activity of the S isomer as compared to the R isomer. The enantiomeric effect on activity is explained by a hydrophobic interaction of the methyl group in the case of 2a, with a pocket formed by Leu106 and Ser107. The 4-ethyl, 4-propyl, and 4-butyloxazolinyl homologues were prepared and tested against HRV-14. All of these compounds exhibited a comparable stereochemical effect. In each case, the S isomer displayed greater levels of activity than the R. The results of energetic considerations of the oxazoline ring in an 8-A pocket bound to the HRV-14 binding site suggest that the twist angle between the oxazoline and phenyl rings resulting from hydrophobic interactions of the alkyl substituents could be one of the determining factors for biological activity.

Antiviral Agents↗
PubMed1988

Structural analysis of a series of antiviral agents complexed with human rhinovirus 14.

The binding to human rhinovirus 14 of a series of eight antiviral agents that inhibit picornaviral uncoating after entry into host cells has been characterized crystallographically. All of these bind into the same hydrophobic pocket within the viral protein VP1 beta-barrel structure, although the orientation and position of each compound within the pocket was found to differ. The compounds cause the protein shell to be less flexible, thereby inhibiting disassembly. Although the antiviral potency of these compounds varies by 120-fold, they all induce the same conformational changes on the virion. The interactions of these compounds with the viral capsid are consistent with their observed antiviral activities against human rhinovirus 14 drug-resistant mutants and other rhinovirus serotypes. Crystallographic studies of one of these mutants confirm the partial sequencing data and support the finding that this is a single mutation that occurs within the binding pocket.

Antiviral Agents↗
PubMed1988

Antiviral agents targeted to interact with viral capsid proteins and a possible application to human immunodeficiency virus.

The tertiary structure of most icosahedral viral capsid proteins consists of an eight-stranded antiparallel beta-barrel with a hydrophobic interior. In a group of picornaviruses, this hydrophobic pocket can be filled by suitable organic molecules, which thereby stop viral uncoating after attachment and penetration into the host cell. The antiviral activity of these agents is probably due to increased rigidity of the capsid protein, which inhibits disassembly. The hydrophobic pocket may be an essential functional component of the protein and, therefore, may have been conserved in the evolution of many viruses from a common precursor. Since eight-stranded anti-parallel beta-barrels, with a topology as in viral capsid proteins, are not generally found for other proteins involved in cell metabolism, this class of antiviral agents is likely to be more virus-specific and less cytotoxic. Furthermore, the greatest conservation of viral capsid proteins occurs within this pocket, whereas the least conserved part is the antigenic exterior. Thus, compounds that bind to such a pocket are likely to be effective against a broader group of serologically distinct viruses. Discovery of antiviral agents of this type will, therefore, depend on designing compounds that can enter and fit snugly into the hydrophobic pocket of a particular viral capsid protein. The major capsid protein, p24, of human immunodeficiency virus would be a likely suitable target.

Antiviral Agents↗
PubMed1987

Refined crystal structure of dogfish M4 apo-lactate dehydrogenase.

The crystal structure of M4 apo-lactate dehydrogenase from the spiny dogfish (Squalus acanthius) was initially refined by a constrained-restrained, and subsequently restrained, least-squares technique. The final structure contained 286 water molecules and two sulfate ions per subunit and gave an R-factor of 0.202 for difraction data between 8.0 and 2.0 A resolution. The upper limit for the co-ordinate accuracy of the atoms was estimated to be 0.25 A. The elements of secondary structure of the refined protein have not changed from those described previously, except for the appearance of a one-and-a-half turn 3(10) helix immediately after beta J. There is also a short segment of 3(10) helix between beta C and beta D in the part of the chain that connects the two beta alpha beta alpha beta units of the six-stranded parallel sheet (residues Tyr83 to Ala87). Examination of the interactions among the different elements of secondary structure by means of a surface accessibility algorithm supports the four structural clusters in the subunit. The first of the two sulfate ions is in the active site and occupies a cavity near the essential His195. Its nearest protein ligands are Arg171, Asp168 and Asn140. The second sulfate ion is located near the P-axis subunit interface. It is liganded by His188 and Arg173. These two residues are conserved in bacterial lactate dehydrogenase and form part of the fructose 1,6-bisphosphate effector binding site. Two other data sets in which one (collected at pH 7.8) or both (collected at pH 6.0) sulfate ions were replaced by citrate ions were also analyzed. Five cycles of refinement with respect to the pH 6.0 data (25 to 2.8 A resolution) resulted in an R value of 0.191. Only water molecules occupy the subunit boundary anion binding site at pH 7.8. The amino acid sequence was found to be in poor agreement with (2Fobs-Fcalc) electron density maps for the peptide between residues 207 and 211. The original sequence WNALKE was replaced by NVASIK. The essential His195 is hydrogen bonded to Asp168 on one side and Asn140 on the other. The latter residue is part of a turn that contains the only cis peptide bond of the structure at Pro141. The "flexible loop" (residues 97 to 123), which folds down over the active center in ternary complexes of the enzyme with substrate and coenzyme, has a well-defined structure. Analysis of the environment of Tyr237 suggests how its chemical modification inhibits the enzyme.

Amino Acid Sequence↗
PubMed1987

Characterization of the antigenic sites on the refined 3-A resolution structure of mouse testicular lactate dehydrogenase C4.

The atomic structure of mouse testicular apolactate dehydrogenase C4 has been refined to 3.0-A resolution yielding a final crystallographic R-factor of 0.256. Comparison with the refined structure of dogfish apolactate dehydrogenase A4 shows that equivalent secondary structure elements are essentially in the same position relative to the molecular 2-fold axes, except for the helices alpha D, alpha E, and alpha 2G in the vicinity of the active center, and the carboxyl-terminal helix alpha H. The positions of antigenic peptides correlate best with surface accessibilities of the monomer rather than of the full tetrameric molecule.

Amino Acid Sequence↗
PubMed1987

Refined structure of southern bean mosaic virus at 2.9 A resolution.

The T = 3 capsid of southern bean mosaic virus is analyzed in detail. The beta-sheets of the beta-barrel folding motif that form the subunits show a high degree of twist, generated by several beta-bulges. Only 34 water molecules were identified in association with the three quasi-equivalent subunits, most of them on the external viral surface. Subunit contacts related by quasi-3-fold axes are similar, are dominated by polar interactions and have almost identical calcium binding sites. There is no metal ion on the quasi-3-fold axis, as previously reported. Subunits related by quasi-2-fold and icosahedral 2-fold axes have different contacts but nevertheless display almost identical interactions between the antiparallel helices alpha A. A dipole-dipole type interaction between these helices may produce an energetically stable hinge that allows two types of dimers in a T = 3 assembly. The temperature factor distribution, the hydrogen-bonding pattern, and the contacts across the icosahedral 2-fold axes suggest that one of the dimer types is present in the intact virion and probably also in solution; the other is produced only during capsid assembly. Interactions along the 5-fold axes are mainly polar and possibly form an ion channel. The beta-sheet structures of the three subunits can be superimposed with considerable precision. Significant relative distortions between quasi-equivalent subunits occur mainly in helices and loops. The two dimeric forms and the subunit distortions are the consequence of the non-equivalent subunit environments in the capsid.

Amino Acid Sequence↗
PubMed1987

The atomic structure of Mengo virus at 3.0 A resolution.

The structure of Mengo virus, a representative member of the cardio picornaviruses, is substantially different from the structures of rhino- and polioviruses. The structure of Mengo virus was solved with the use of human rhinovirus 14 as an 8 A resolution structural approximation. Phase information was then extended to 3 A resolution by use of the icosahedral symmetry. This procedure gives promise that many other virus structures also can be determined without the use of the isomorphous replacement technique. Although the organization of the major capsid proteins VP1, VP2, and VP3 of Mengo virus is essentially the same as in rhino- and polioviruses, large insertions and deletions, mostly in VP1, radically alter the surface features. In particular, the putative receptor binding "canyon" of human rhinovirus 14 becomes a deep "pit" in Mengo virus because of polypeptide insertions in VP1 that fill part of the canyon. The minor capsid peptide, VP4, is completely internal in Mengo virus, but its association with the other capsid proteins is substantially different from that in rhino- or poliovirus. However, its carboxyl terminus is located at a position similar to that in human rhinovirus 14 and poliovirus, suggesting the same autocatalytic cleavage of VP0 to VP4 and VP2 takes place during assembly in all these picornaviruses.

Antigens, Viral↗
PubMed1987

Comparison of the three-dimensional structure of two human rhinoviruses (HRV2 and HRV14).

An attempt has been made to build a model of human rhinovirus 2 (HRV2) based on the known human rhinovirus 14 (HRV14) structure. HRV2 was selected because its amino acid sequence is known and because it belongs to the minor rhinovirus receptor class as compared to HRV14, which belongs to the major class. Initial alignment of HRV2 with HRV14 based on the primary sequence and the knowledge of the three-dimensional structure of HRV14 showed that the most probable position of the majority of insertions and deletions occurred in the vicinity of the neutralizing immunogenic sites (NIm). Out of a total of 855 amino acids present in one copy of each of the capsid proteins VP1 through VP4 of HRV14, 411 are different between the two viruses. There are also 6 amino acid residues inserted and 14 residues deleted in HRV2 relative to HRV14. Examination of amino acid interactions showed several cases of conservation of function, e.g., salt bridges or the filling of restricted space. The largest variation amongst the residues lining the canyon, the putative receptor binding site, was in the carboxy-terminal residues of VP1.

Amino Acid Sequence↗
PubMed1987

Implications of the picornavirus capsid structure for polyprotein processing.

Mature picornaviral proteins are derived by progressive, posttranslational cleavage of a precursor polyprotein. These cleavages play a role in the control of virus functions. Although the processed termini are separated by as much as 75 A in the native virus capsid, the fold and arrangement of polypeptide chains in a protomer before proteolysis are likely to be similar to that found in the mature virus. The three-dimensional structures of rhinovirus and Mengo virus suggest that the cleavage sites within the protomeric precursor are in structurally flexible regions. The final proteolytic processing event, maturation of the virion peptide VP0 (also called peptide 1AB) appears to occur by an unusual autocatalytic serine protease-type mechanism possibly involving viral RNA basic groups that would serve as proton-abstractors during the cleavage reaction.

Capsid↗
PubMed1987

What does the molecular structure of viruses tell us about viral functions?

The structures of the protein shell of a number of simple icosahedral RNA plant and animal viruses are now known at atomic resolution. In addition, components of viral capsids such as the haemagglutinin and neuraminidase spikes of influenza virus and the hexon unit of adenovirus are known in similar detail. These structures have provided a wealth of information on viral assembly, viral disassembly, the antigenic surface on viruses available to neutralizing antibodies, the host cell receptor attachment site, fusion of viral particles with the host cell, processing of polyproteins during maturation and the manner in which antiviral agents can interfere with the function of a viral capsid.

Antibodies, Viral↗
PubMed1986

The site of attachment in human rhinovirus 14 for antiviral agents that inhibit uncoating.

WIN 51711 and WIN 52084 are structurally related, antiviral compounds that inhibit the replication of rhino (common cold) viruses and related picornaviruses. They prevent the pH-mediated uncoating of the viral RNA. The compounds consist of a 3-methylisoxazole group that inserts itself into the hydrophobic interior of the VP1 beta-barrel, a connecting seven-membered aliphatic chain, and a 4-oxazolinylphenoxy group (OP) that covers the entrance to an ion channel in the floor of the "canyon." Viral disassembly may be inhibited by preventing the collapse of the VP1 hydrophobic pocket or by blocking the flow of ions into the virus interior.

Antiviral Agents↗
PubMed1986

Three-dimensional structure of catalase from Penicillium vitale at 2.0 A resolution.

The three-dimensional structure analysis of crystalline fungal catalase from Penicillium vitale has been extended to 2.0 A resolution. The crystals belong to space group P3(1)21, with the unit cell parameters of a = b = 144.4 A and c = 133.8 A. The asymmetric unit contains half a tetrameric molecule of 222 symmetry. Each subunit is a single polypeptide chain of approximately 670 amino acid residues and binds one heme group. The amino acid sequence has been tentatively determined by computer graphics model building (using the FRODO system) and comparison with the known sequence of beef liver catalase. The atomic model has been refined by the Hendrickson & Konnert (1981) restrained least-squares program against 68,000 reflections between 5 A and 2 A resolution. The final R-factor is 0.31 after 24 refinement cycles. The secondary and tertiary structure of the catalase has been analyzed.

Amino Acid Sequence↗
PubMed1986

Comparison of beef liver and Penicillium vitale catalases.

The structures of Penicillium vitale and beef liver catalase have been determined to atomic resolution. Both catalases are tetrameric proteins with deeply buried heme groups. The amino acid sequence of beef liver catalase is known and contains (at least) 506 amino acid residues. Although the sequence of P. vitale catalase has not yet been determined chemically, 670 residues have been built into the 2 A resolution electron density map and have been given tentative assignments. A large portion of each catalase molecule (91% of residues in beef liver catalase and 68% of residues in P. vitale catalase) shows structural homology. The root-mean-square deviation between 458 equivalenced C alpha atoms is 1.17 A. The dissimilar parts include a small fragment of the N-terminal arm and an additional "flavodoxin-like" domain at the carboxy end of the polypeptide chain of P. vitale catalase. In contrast, beef liver catalase contains one bound NADP molecule per subunit in a position equivalent to the chain region, leading to the flavodoxin-like domain, of P. vitale catalase. The position and orientation of the buried heme group in the two catalases, relative to the mutually perpendicular molecular dyad axes, are identical within experimental error. A mostly hydrophobic channel leads to the buried heme group. The surface opening to the channel differs due to the different disposition of the amino-terminal arm and the presence of the additional flavodoxin-like domain in P. vitale catalase. Possible functional implications of these comparisons are discussed.

Amino Acid Sequence↗
PubMed1986

The structure of rabbit muscle phosphoglucomutase at intermediate resolution.

The three-dimensional structure of rabbit phosphoglucomutase has been determined to 2.7 A resolution by a combination of isomorphous and molecular replacement techniques. Heavy atom positions were found by using vector search and difference Fourier methods. The two molecules in the asymmetric unit form a dimer with its 2-fold axis perpendicular to and intersecting with a crystallographic 4(1) axis. Thus, the dimers are arranged so that they form fibers that are coincident with the 4(1) axes. A polypeptide model, corresponding with the known residue sequence, has been fitted to the electron density map to produce a structure that consists of four domains. All four have an alpha/beta structure; the first three have a somewhat similar topology that is based on a mixed parallel/antiparallel beta sheet, whereas the fourth is based on an antiparallel sheet. The active site lies between the four domains, with the phosphoserine residue in the first domain and some of the probable substrate-binding residues in the fourth and final domain. The carboxyl edges of all four sheets are directed towards the active site region, which lies in a deep crevice.

Animals↗