Search PubMed⌕ Search

Biomedical subjects

M Frederick Hawthorne

Publications and source records attributed to M Frederick Hawthorne.

18 recordsLinked to original sources
PubMed2006

Selective irradiation of the vascular endothelium has no effect on the survival of murine intestinal crypt stem cells.

The possible role of vascular endothelial cell damage in the loss of intestinal crypt stem cells and the subsequent development of the gastrointestinal (GI) syndrome is addressed. Mice received whole-body epithermal neutron irradiation at a dose rate of 0.57 +/- 0.04 Gy x min(-1). An additional dose was selectively targeted to endothelial cells from the short-ranged (5-9 microm) particles released from neutron capture reactions in 10B confined to the blood by incorporation into liposomes 70-90 nm in diameter. Different liposome formulations produced 45 +/- 7 or 118 +/- 12 microg/g 10B in the blood at the time of neutron irradiation, which resulted in total absorbed dose rates in the endothelial cells of 1.08 +/- 0.09 or 1.90 +/- 0.16 Gy x min(-1), respectively. At 3.5 d after irradiation, the intestinal crypt microcolony assay showed that the 2- to 3-fold increased doses to the microvasculature, relative to the nonspecific whole-body neutron beam doses, caused no additional crypt stem cell loss beyond that produced by the neutron beam alone. The threshold dose for death from the GI syndrome after neutron-beam-only irradiation was 9.0 +/- 0.6 Gy. There were no deaths from the GI syndrome, despite calculated absorbed doses to endothelial cells as high as 27.7 Gy, in the groups that received neutron beam doses of <9.0 Gy with boronated liposomes in the blood. These data indicate that endothelial cell damage is not causative in the loss of intestinal crypt stem cells and the eventual development of the GI syndrome.

Animals↗
PubMed2006

Closomers of high boron content: synthesis, characterization, and potential application as unimolecular nanoparticle delivery vehicles for boron neutron capture therapy.

Unique nanosized closomers of high boron content that may exhibit potential as boron neutron capture therapy target species have been synthesized. The design of these boron-rich nanospheres is based in part on previous work involving dodeca(carboranyl)-substituted closomers [Thomas, J.; Hawthorne, M. F. Chem. Commun. 2001, 1884-1885]. Coupling of ortho-carborane moieties through ester and ether linkages to the rigid [closo-B(12)(OH)(12)](2-) scaffold resulted in the development of a 12(12)-closomer-ester derivative, dodeca[6-(1,2-dicarba-closo-dodecaboran-1-yl)hexanoate]-closo-dodecaborate (2-), 6, and 12(12)-closomer-ether derivatives, dodeca[6-(2-methy1-1,2-dicarba-nido-dodecaboran-1-yl)hexyl]-closo-dodecaborane (14-), 14, and dodeca[6-(7,8-dicarba-nido-dodecaboran-7-yl)hexyl]-closo-dodecaborane (14-), 15. These closomers were investigated by UV-visible spectroscopy and cyclic voltammetry. Additionally, a deboronation method employing NaCN as the nucleophilic reagent was utilized to obtain sodium salts of the ether-linked nido-closomer polyanions, which were purified using a newly developed size-exclusion high pressure liquid chromatography method.

Animals↗
PubMed2006

Synthesis and structural characterization of symmetrical closo-4,7-I2-1,2-C2B10H10 and [(CH3)3NH][nido-2,4-I2-7,8-C2B9H10].

The boron-atom insertion reaction of nido-9,11-I(2)-7,8-C(2)B(9)H(9)(2-), with the HBCl(2):SMe(2) complex yields closo-4,7-I(2)-1,2-C(2)B(10)H(10), 1, in excellent yield. Although the two boron atoms (B3 and B6) nearest to the carbon atoms in 1 are equally available for attack by nucleophiles, the boron-degradation reaction of 1 with alkoxide ion occurs only at the B6 vertex, yielding regioselectively [(CH(3))(3)NH][nido-2,4-I(2)-7,8-C(2)B(9)H(10)], 2. The molecular structures of 1 and 2 have been determined by X-ray diffraction studies. Crystallographic data are as follows. For 1, monoclinic, space group P2(1)/n, a = 6.9199(19) Angstroms, b = 23.9560(7) Angstroms, c = 7.2870(2) Angstroms, beta = 94.081(4) degrees, V = 1204.9(6) Angstroms(3), Z = 4, rho(calcd) = 2.18 g cm(-3), R = 0.020, R(w) = 0.0610; for 2, orthorhombic, space group Pca2(1), a = 14.1141(7) Angstroms, b = 7.0276(4) Angstroms, c = 16.4602(9) Angstroms, V = 1632.7(15) Angstroms(3), Z = 4, rho(calcd) = 1.81 gcm(-3), R = 0.022, R(w) = 0.0623.

Journal Article↗
PubMed2005

Synthesis of stable dodecaalkoxy derivatives of hypercloso-B12H12.

The scope and limitations of the alkylation of [closo-B12(OH)12]2- using a series of fourteen alkyl and aralkyl halides and two p-toluenesulfonic acid esters in the presence of N,N-diisopropylethylamine have been investigated. The dodecaalkoxy-closo-dodecaborate products, [closo-B12(OR)12]2-, and their hypercloso two-electron oxidation products have been explored. The species [closo-B12(OR)12]2- containing 26 cage-bonding electrons may undergo two reversible, sequential, one-electron oxidation processes, producing a 25-electron radical anion and a 24-electron neutral species. Several oxidizing reagents were investigated for the chemical oxidation of [closo-B12(OR)12]2- and [hypercloso-B12(OR)12]- to [hypercloso-B12(OR)12]. Both FeCl3.6H2O and K3Fe(CN)6 in 90/5/5 ethanol/acetonitrile/H2O were found to be the reagents of choice. The reverse reaction leading from the neutral species to the radical anion and subsequently to the dianion was achieved using sodium borohydride in ethanol. A variety of alkoxyl derivatives have been synthesized by heating the reactants for extended periods of time in acetonitrile at the reflux temperature. The use of elevated reaction temperatures attained by employing moderate argon pressure (autoclave) over the reaction mixture led to drastic reductions in reaction times and increased efficiency. X-ray diffraction studies of substituted dodecabenzyl ether derivatives proved that 2(2-) has approximate Ih symmetry while hypercloso-2, -3, -9, -11, -12, and -13 have approximate D3d point group symmetry due to Jahn-Teller distortion from Ih.

Journal Article↗
PubMed2005

Organic syntheses on an icosahedral borane surface: closomer structures with twelvefold functionality.

The syntheses of a series of novel ester-linked derivatives of the icosahedral [closo-B12(OH)12]2- boron cluster (closomer esters) are described using several synthetic methods. The reaction of bis(tetrabutylammonium)-closo-dodecahydroxy-dodecaborate, [NBu4]2 1, with carboxylic acid chlorides and anhydrides, vinyl esters with a Y5(OiPr)13O catalyst and 1,1'-carbonyldiimidazole-activated carboxylic acids yields the corresponding dianionic dodeca-ester closomers. The method using 1,1'-carbonyldiimidazole-activated carboxylic acids may be employed as a general synthetic strategy. The use of elevated reaction temperatures, achievable under pressure, to expedite syntheses is described. An attractive methodology using immobilized scavenger reagents for the expeditious purification of the closomer esters was employed. The developed methodology is compatible with a variety of peripheral functional groups attached to the termini of densely packed, carboxylate ester-linked radial arms bonded to the icosahedral borane surface. A closomer ester having twelve terminal amino groups was prepared, and without isolation, fully acetylated in good yield.

Acylation↗
PubMed2005

Camouflaged carborarods derived from B-permethyl-1,12-diethynyl-para- and B-octamethyl-1,7-diethylnyl-meta-carborane modules.

Rigid camouflaged carborarods constructed from the corresponding C,C'-diethynyl derivatives of B-decamethyl-1,12-dicarbadodecaborane(12) (6) and B-octamethyl-1,7-dicarbadodecaborane(12) (48) have been synthesized by largely conventional organic transformations. These carborarods are the longest discrete rod species available by this method in which B-methylated p-carborane and m-carborane cages are linked through their carbon vertices by using butadiynylene moieties. They exhibit enhanced solubility in common organic solvents relative to all other presently known carborane-based rigid-rod molecules. The oxidative coupling of bis(ethynyl) derivatives of 6 generates oligomers containing, on average, 16 carborane modules. The structural characterization of the corresponding dimeric species revealed that the carborarods possess a sinusoidal chain distortion in the solid state. The stereoelectronic properties of these and related model carborarods were evaluated by using molecular dimensions as a monitor for the comparison of computational and experimental methods. In addition, the effect of exhaustive B-methylation of 12- and 10-vertex para-carborane cages in a series of model C,C'-diethynyl derivatives was similarly investigated by computational and structural studies. As expected, a correlation of intercage C--C bond lengths with cage size was observed and was attributed to hybridization effects. B-Permethylation had no significant structural effect with either 10- or 12-vertex cage derivatives. Relative to unsubstituted compounds, thermal and chemical stabilities of B-permethylated derivatives were increased through the operation of a steric "bumper-car" process, and solubilities in organic solvents were enhanced. The formation of linear, sterically encumbered platina-carborarods using ethynyl derivatives of 6 as precursors is described.

Journal Article↗
PubMed2005

Camouflaged carborane amphiphiles: synthesis and self-assembly.

A series of amphiphilic amine hydrochloride salts of B-polymethylated (camouflaged) (aminoalkyl)- and bis(aminoalkyl)carboranes have been designed and synthesized in high yield for the purpose of constructing novel carborane-based nanomaterials. Due to the distinct separation of the hydrophobic and hydrophilic regions within each salt, the mono- and disubstituted amphiphiles spontaneously self-assembled upon sonication into rod-shape micro/nanostructures in aqueous solutions. The effects of concentration, method of dispersion, solvent, chain length, counterion, ionic charge, and underlying carborane cage structure on the formation of the these rod products were investigated. The microrods have been studied by transmission electron microscopy (TEM), optical microscopy, X-ray powder diffraction (XRD), thermogravimetric/differential thermal analysis (TG/DTA), and FTIR. For the first time, this work clearly demonstrates the self-assembly of B-polymethylated carboranes into supramolecular structures.

Journal Article↗
PubMed2005

Coordination-driven self-assemblies with a carborane backbone.

The design and self-assembly of five new supramolecular complexes (a rectangle, a triangle, a hexagon, and two squares) are described. These assemblies incorporate carborane building blocks and were prepared in excellent yields (>85%). The assemblies and building blocks were characterized with multinuclear NMR spectroscopy, electrospray ionization mass spectrometry, and elemental analysis. Isotopically resolved mass spectrometry data confirm the existence of the rectangle, triangle, and hexagon, and NMR data are consistent with the formation of all five assemblies. The X-ray structures of two linear carborane building blocks, 1,12-(4-CC(C(5)H(4)N)(2)-p-C(2)B(10)H(10) (1) and 1,12-(trans-(Pt(PEt(3))(2)I)CC)(2)-p-C(2)B(10)H(10) (2), are reported: 1 is monoclinic, P2(1)/c, a = 10.6791(4) A, b = 8.0091(14) A, c = 11.6796(4) A, beta = 107.8461(15) degrees , V = 950.89(5) A(3), Z = 2; 2 is monoclinic, C2/c, a = 62.1128(10) A, b = 22.0071(3) A, c = 14.0494(2) A, beta = 89.9411(8) degrees , V = 19204.4(5) A(3), Z = 16. Crystals of the linear linker 1 exhibit close pi-pi pyridine and pyridine-B(carborane) interactions, which are discussed.

Boranes↗
PubMed2004

An improved method for the synthesis of [closo-B12(OH)12]-2.

The dicesium salt of the icosahedral borane anion dodecahydroxy-closo-dodecaborate(2-), closo-Cs(2)B(12)(OH)(12), Cs(2)4, was prepared using an improved synthetic pathway. Heating cesium dodecahydro-closo-dodecaborate, closo-Cs(2)B(12)H(12), Cs(2)1, with 30% hydrogen peroxide added in successive increments at 105-110 degrees C provided Cs(2)4 in 95% yield. Reaction progress was monitored using (1)H-decoupled (11)B NMR while (17)O NMR provides the most reliable way to detect the presence of peroxides in the reaction solution. The reaction may be safely increased in scale to afford Cs(2)4 in multigram quantities.

Journal Article↗
PubMed2004

Electrical or photocontrol of the rotary motion of a metallacarborane.

Rotary motion around a molecular axis has been controlled by simple electron transfer processes and by photoexcitation. The basis of the motion is intramolecular rotation of a carborane cage ligand (7,8-dicarbollide) around a nickel axle. The Ni(III) metallacarborane structure is a transoid sandwich with two pairs of carbon vertices reflected through a center of symmetry, but that of the Ni(IV) species is cisoid. The interconversion of the two provides the basis for controlled, rotational, oscillatory motion. The energies of the Ni(III) and Ni(IV) species are calculated as a function of the rotation angle.

Journal Article↗
PubMed2003

The synthesis of carboacycles derived from B,B'-bis(aryl) derivatives of icosahedral ortho-carborane.

Reactions of both closo-9,12-I2-1,2-C2B10H10 and closo-9,10-I2-1,7-C2B10H10 with an excess of aryl magnesium bromide in the presence of [PdCl2(PPh3)2] afford the corresponding closo-9,12-(4-R-C6H4)2-1,2-C2B10H10 [R=H (1), Me (2), OMe (3), SMe (4), N(CH3)2 (5), Cl (6)] and closo-9,10-(4-R-C6H4)2-1,7-C2B10H10 [R'=Me (7), OMe (8), N(CH3)2 (9), Cl (10), and -C[(OCH2)2]CH3 (11)] compounds in high yields. The anisole derivatives 3 and 8 were deprotected to yield the corresponding bis-phenols 12 and 13, respectively. Structural analyses of compounds 1, 3, 6, and 12 are reported. Re-etherification of compound 12 by using gamma-bromotriethyleneglycol methyl ether provided 14 (R=(CH2CH2O)3CH3). Oxidation of 4 with ceric(IV) ammonium nitrate (CAN) generated the bis-sulfoxide 15 (R=S(O)Me). Deprotection of compound 11 led to the corresponding acetyl derivative 18 (R'=C(O)Me). Bis-anisole 3 was tethered with 1,3-dibromopropane, 1,6-dibromohexane, 1,8-dibromooctane, 4,4'-bis(iodomethyl)-1,1'-biphenyl, and alpha,alpha'-dibromo-2,6-lutidine to afford the dimers 20b, 21b, 22b, 23b, and 24b, respectively. The tetrameric carboracycles 27a and 30a, as well as the dimeric 29c were obtained through repetitive coupling of the dimeric compounds 20b, 24b, and 22b with 1,3-dibromopropane, alpha,alpha'-dibromo-2,6-lutidine, and 1,8-dibromooctane, respectively. The tetrameric carboracycle 28a was obtained upon consecutive reactions of 1 with 1,4-dibromobutane. Hexameric carboracycle 28b was identified as a byproduct. Exhaustive ether cleavage of 27a generated octaphenol 31a. Re-etherification of 31a with trimethylenesultone provided the octasulfonate 32a, the first example of a water-soluble carboracycle. Linkage of dimer 23b with alpha,alpha'-dibromolutidine yielded the cyclic tetrameric tetrapyridyl derivative 30a in low yield. The structures of the carboracycles 27a, 28a, 28b, and 30a have been confirmed by Xray crystallography. In addition, the compounds 28a,b are the first reported carboracycles that interact with solvent molecules in a host-guest fashion.

Journal Article↗
PubMed2002

The versatile chemistry of the [B20H18]2- ions: novel reactions and structural motifs.

Among the polyhedral [closo-BnHn]2- ion series (n = 5-12 inclusive) the aromatic [closo-B10H10]2- ion is both readily available and quite reactive. Among its many reactions which retain its cage structure one finds the oxidative dimerization reaction in which two [closo-B10H12]2- ions each formally lose a hydride ion and undergo dimerization of the resulting [closo-B10H9]- ions to produce the [trans-B20H18]2- ion. The two-component [closo-B10H9]- ions of the latter are linked together by a pair of unique B-B-B bonds which provide unprecedented reactivity to the structure. Among these reactions are the two-electron reduction to a set of three interconvertible [B20H18]4- ions having intercage B-B bonds and the related reductive substitution reaction in which [trans-B20H18]2- undergoes attack by nucleophile, L, to produce [B20H18L]2-. The latter species is formally a substituted [B20H19]3- (L = H) ion formed by B-B bond protonation of one of the isomeric [B20H18]4- ions. These and a variety of novel reactions are described here along with interrelated reaction mechanisms considered for the first time.

Boranes↗
PubMedDate not supplied

A critical assessment of boron target compounds for boron neutron capture therapy.

Boron neutron capture therapy (BNCT) has undergone dramatic developments since its inception by Locher in 1936 and the development of nuclear energy during World War II. The ensuing Cold War spawned the entirely new field of polyhedral borane chemistry, rapid advances in nuclear reactor technology and a corresponding increase in the number to reactors potentially available for BNCT. This effort has been largely oriented toward the eradication of glioblastoma multiforme (GBM) and melanoma with reduced interest in other types of malignancies. The design and synthesis of boron-10 target compounds needed for BNCT was not channeled to those types of compounds specifically required for GBM or melanoma. Consequently, a number of potentially useful boron agents are known which have not been biologically evaluated beyond a cursory examination and only three boron-10 enriched target species are approved for human use following their Investigational New Drug classification by the US Food and Drug Administration; BSH, BPA and GB-10. All ongoing clinical trials with GBM and melanoma are necessarily conducted with one of these three species and most often with BPA. The further development of BNCT is presently stalled by the absence of strong support for advanced compound evaluation and compound discovery driven by recent advances in biology and chemistry. A rigorous demonstration of BNCT efficacy surpassing that of currently available protocols has yet to be achieved. This article discusses the past history of compound development, contemporary problems such as compound classification and those problems which impede future advances. The latter include means for biological evaluation of new (and existing) boron target candidates at all stages of their development and the large-scale synthesis of boron target species for clinical trials and beyond. The future of BNCT is bright if latitude is given to the choice of clinical disease to be treated and if a recognized study demonstrating improved efficacy is completed. Eventually, BNCT in some form will be commercialized.

Animals↗
PubMedDate not supplied

Reagents for astatination of biomolecules: comparison of the in vivo distribution and stability of some radioiodinated/astatinated benzamidyl and nido-carboranyl compounds.

An investigation has been conducted to assess the in vivo stability of a series of astatinated benzamides and astatinated nido-carborane compounds in mice. It was hypothesized that the higher bond strength of boron-astatine bonds in the nido-carboranes might provide increased stability toward in vivo deastatination. Four tri-n-butylstannylbenzamides were prepared for radiohalogenation and evaluation in vivo. Those compounds were N-propyl-4-(tri-n-butylstannyl)benzamide 1a, N-propyl-3-(tri-n-butylstannyl)benzamide 2a, ethyl 4-tri-n-butylstannylhippurate 3a, and 4-tri-n-butylstannyl-hippuric acid 4a. Seven mono-nido-carboranyl derivatives were prepared for radiohalogenation and in vivo evaluation. Four of the seven mono-carboranyl derivatives (5a, 6a, 7a, 13a) contained a 3-(nido-carboranyl)propionamide functionality, and the remaining compounds (8a, 8g, 10a) contained a 4-(nido-carboranyl)aniline functionality. Two additional derivatives (11a, 12a) were prepared that contained bis-(nido-carboranylmethyl)benzene moieties (also referred to as Venus flytrap complexes (VFCs). All benzamide and nido-carborane compounds underwent facile iodination and radiohalogenation, except a 4-(nido-carboranyl)aniline derivative, 8a. Iodination of 8a resulted in a mixture, of which the desired iodinated product was a minor component. Therefore, radiohalogenation was not attempted. It is believed that the mixture of products is due to the presence of a thiourea bond. Previous studies have shown that thiourea bonds can interfere with halogenation reactions. In vivo comparisons of the compounds were conducted by co-injection of dual labeled (125/131I and 211At) compounds. Tissue distribution data were obtained at 1 and 4 h postinjection of the radiolabeled compounds, as that was sufficient to determine if astatine was being released. Stability of the astatinated compound was assessed by the difference in concentration of radioiodine and astatine in lung and spleen. All of the benzamides were found to undergo rapid deastatination in vivo. The nido-carborane derivatives appeared to be slightly more stable to in vivo deastatination; however, they had long blood residence times. The surprising finding was that the VFC derivatives did not release 211At in vivo, even though they rapidly localized to liver. This finding provides encouragement that stable conjugates of 211At may be attained if appropriate modifications of the VFC can be made to redirect their excretion through the renal system.

Animals↗
PubMedDate not supplied

Unilamellar liposomes with enhanced boron content.

A new type of boron-rich, DSPC-free, unilamellar liposomes was formed using the novel dual-chain, ionic, nido-carborane lipid, K[nido-7-(C16H33OCH2)2CHOCH2-7,8-C2B9H11] (DAC-16), and cholesterol for encapsulation of an aqueous buffer core. Since DSPC was not necessary for the formation of stable DAC-16 liposomes, the boron concentration of these vesicles was increased dramatically to approximately 8.8 wt % in the dry lipid; these liposomes had a high bilayer boron incorporation efficiency of 98%. DSPC-free liposomes exhibited a size distribution pattern of 40-60 nm, which was in the range normally associated with selective tumor uptake. This size distribution was maintained throughout storage at room temperature for several months. Additionally, optimized liposome formulations incorporating DAC-16, DSPC, and cholesterol were identified having stable size distribution patterns after storage for more than two months at a variety of temperatures. Although animal studies indicate that DAC-16 liposomes are toxic, this new ionic nido-carborane lipid allows the formation of liposomes of high boron content for in vitro applications that require the delivery of large amounts of boron.

Animals↗