Search PubMed⌕ Search

Biomedical subjects

M Fini

Publications and source records attributed to M Fini.

At least 19 recordsLinked to original sources

Destination of titanium particles detached from titanium plasma sprayed implants.

Small titanium particles may detach from titanium plasma sprayed (TPS) implants during implant insertion, when no preliminary tapping is used, probably for the frictional force between titanium coating and host bone. Aim of this study was to investigate the destination of these titanium particles observed in the peri-implant environment. Twenty-four TPS screws were implanted in tibiae of two sheep. Fourteen and 90 days after implantation the implants with the surrounding bone were removed and processed to be analyzed by light microscope and scanning electron microscope (secondary electron and back-scattered electron probes). Small titanium particles detached from the unloaded TPS implants were observed both in the newly-formed bone matrix and in marrow tissue. Histomorphometric analysis showed that both at 14 and 90 days after implantation the titanium particles appeared more concentrated in marrow tissue than in calcified bone matrix, decreasing by 66.4% over time. In particular, smaller particles (<250 microm(2)) decreased by 81.5%, whereas the larger ones (250-2000 microm(2)) did not show any significant variations over time, suggesting that most of the smaller particles may undergo to ionic dissolution, probably migrating into the peri-implant marrow lacunae. A slight migration of titanium particles from the implant surface towards the more distant peri-implant tissues was also demonstrated over time.

Animals↗

Normal and osteopenic bone-derived osteoblast response to a biomimetic gelatin-calcium phosphate bone cement.

We have recently developed a new calcium phosphate bone cement enriched with gelatin (GEL-CP), which exhibits improved mechanical properties with respect to the control cement (C-CP). In a previous study, we demonstrated the good response of osteoblast-like cells to the new biomimetic bone cement. Herein, we extend the investigation to primary culture of osteoblasts derived from healthy and pathological bones. Osteoblasts derived from normal (N-OB) and osteopenic (O-OB) sheep bones were cultured on samples of GEL-CP, and their behavior was compared with that of cells cultured on C-CP as control. Cell morphology, proliferation, and differentiation were evaluated at 3 and 7 days. SEM analysis revealed that both N-OB and O-OB showed a normal morphology when cultured on GEL-CP. Biological tests demonstrated that the gelatin-enriched cement improves osteoblasts' activity and differentiation of O-OB cultures, with respect to the control samples. The data indicate that the new composite cement positively stimulates alkaline phosphatase activity, collagen type I, and osteocalcin production, not only in N-OB, but also in O-OB culture. The improvement due to the presence of gelatin suggests that the biomimetic composite material could be successfully applied as bone substitute also in the presence of osteopenic bone.

Animals↗

Collagen I-coated titanium surfaces: mesenchymal cell adhesion and in vivo evaluation in trabecular bone implants.

The goal of the study was the evaluation of the effect of modification of titanium implants by acrylic acid surface grafting-collagen I coupling. Tests were performed on titanium samples treated by galvanostatic anodization to create a porous surface topography. Surface characterization by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) confirms the biochemical modification of the surface and shows a surface topography characterized by pores mostly below 1 mum diameter. In vitro evaluation involving human mesenchymal cells shows enhanced cell growth on collagen coated surfaces as compared to titanium ones. Four weeks in vivo evaluation of implants in rabbit femur trabecular bone shows improvements of bone-to-implant contact, while improvement of bone ingrowth is slightly not significant (p = 0.056), when compared to the control. Overall, these data indicate that integration in trabecular, or cancellous, bone can be enhanced by the surface collagen layer, confirming previous findings obtained by modification of machined surfaces by the same approach in cortical bone implants.

Animals↗

Low testosterone levels are associated with coronary artery disease in male patients with angina.

Historically, high androgen levels have been linked with an increased risk for coronary artery disease (CAD). However, more recent data suggest that low androgen levels are associated with adverse cardiovascular risk factors, including an atherogenic lipid profile, obesity and insulin resistance. The aim of the present study was to evaluate the relationship between plasma sex hormone levels and presence and degree of CAD in patients undergoing coronary angiography and in matched controls. We evaluated 129 consecutive male patients (mean age 58+/-4 years, range 43-72 years) referred for diagnostic coronary angiography because of symptoms suggestive of CAD, but without acute coronary syndromes or prior diagnosis of hypogonadism. Patients were matched with healthy volunteers. Out of 129 patients, 119 had proven CAD; in particular, 32 of them had one, 63 had two and 24 had three vessel disease, respectively. Patients had significantly lower levels of testosterone than controls (9.8+/-6.5 and 13.5+/-5.4 nmol/l, P<0.01) and higher levels of gonadotrophin (12.0+/-1.5 vs 6.6+/-1.9 IU/l and 7.9+/-2.1 vs 4.4+/-1.4, P<0.01 for follicle-stimulating hormone and luteinizing hormone, respectively). Also, both bioavailable testosterone and plasma oestradiol levels were lower in patients as compared to controls (0.84+/-0.45 vs 1.19+/-0.74 nmol/l, P<0.01 and 10.7+/-1.4 vs 13.3+/-3.5 pg/ml, P<0.05). Hormone levels were compared in cases with one, two or three vessel disease showing significant differences associated with increasing severity of coronary disease. An inverse relationship between the degree of CAD and plasma testosterone levels was found (r=-0.52, P<0.01). In conclusion, patients with CAD have lower testosterone and oestradiol levels than healthy controls. These changes are inversely correlated to the degree of CAD, suggesting that low plasma testosterone may be involved with the increased risk of CAD in men.

Adult↗

Metastatic breast cancer: an updating.

This article reports on recent advances on metastatic breast cancer. Detection, prognostic factors, predictors of response to therapy and therapy, with particular regard to targeted therapies, were examined. DETECTION: Unlike current guidelines that yet do not routinely recommend intensive clinical-instrumental post-operative follow-up of breast cancer patients, relatively large data collected in the last decades have shown that an intensive post-operative follow-up with 'dynamic evaluation' of a suitable tumour marker panel precedes a few months as average the clinical and/or instrumental sign of a pending relapse in most relapsed patients and largely limits the use of the common instrumental examinations. PROGNOSIS AND THERAPY PREDICTORS: Disease-free interval (DFI) 24 months and disease confined to bony skeleton are prognostic factors more often correlated with relatively poor or prolonged survival, respectively. Estrogen receptor (ER) expression in primary tumour and at the relapse correlates strongly with response to salvage hormone therapy and data from large trials showed that 38-59% of ER and/or PR+ post-menopausal patients had clinical benefit from first line tamoxifen or aromatase inhibitors. An inverse correlation of ER with epidermal growth factor receptor (EGFR) has been found. The co-expression of HER-2/neu and/or elevated serum HER-2/neu protein level were associated with a low rate and shorter duration of response of ER+ patients to first line hormone therapy. Accordingly, ER-EGFR- compared with ER-EGFR+ tumours are usually more responsive to endocrine therapy. High class III beta-tubulin expression or fall in insulin-like growth factor binding protein-3 (IGFBP-3) from baseline levels have been found to significantly predict resistance to chemotherapeutic agents. THERAPY: Liposomes as carrier of doxorubicin (Caelix, Evacet, Myocet) is one approach to decrease the anthracycline-related cardiac toxicity. Weekly paclitaxel or docetaxel and oral formulation of vinorelbine and 5-fluorouracil (5-FU) (capecitabine) provide new effective and well tolerated options that reach greater dose intensity and cumulative dose than with the conventional schedules. As to the so called 'tailored' or targeted therapies, the more potent and highly selective third generation of aromatase inhibitors (letrozole, anastrozole, exemestane) targeting ER+ tumours by estrogen deprivation, challenge tamoxifen as current standard first line therapy in postmenopausals. One pilot study showed that stimulation of cellular immunity by the addition of beta-interferon-interleukin-2 sequence in patients on clinical benefit on first line tamoxifen significantly prolonged median overall survival (OS) and duration of response compared to that observed in similar patients only treated with tamoxifen. Trastuzumab, a humanised monoclonal antibody to extracellular domain of HER-2, plus conventional chemotherapy has become a standard of care for women with overexpressing HER-2 tumours. Bevacizumab is a recombinant humanised monoclonal antibody to vascular endothelial growth factor (VEGF) that in refractory metastatic breast cancer doubled the response rate of capecitabine although it did not affect survival. Finally, the so called 'oligometastatic' and a few stage IV diseases are conditions amenable to be rendered with no evidence of disease (NED) after local surgery and/or radiation. In both, as well as in complete responders to chemotherapy, minimal residual disease (m.r.d.) likely continues to be present. Recent data suggest that 'biological' therapy (immunomodulators and/or retinoids with or without hormone therapy), might be suitable to be successfully tested in these patients as maintenance treatment given soon after local intervention or chemotherapy.

Angiogenesis Inhibitors↗

Electrochemotherapy a novel approach to the treatment of metastatic nodules on the skin and subcutaneous tissues.

Electrochemotherapy (ECT) is a new treatment for metastatic nodules of solid tumors on the skin or subcutaneous tissue. ECT is a combination of a physical effect, cell membrane poration, and cytotoxic drug administration. Cell membrane poration is achieved by applying short intense electric filed pulses. Pore formation on the cell membrane allows low permeant drugs like bleomycin or cisplatin to enter the cell and thus locally increase their toxicity: up to 10.000 times for bleomycin and 80 times for cisplatin. ECT has been investigated in a multicenter study European Standard Operating Procedures for Electrochemotherapy (ESOPE) that demonstrates how by ECT over 80% of the cutaneous or subcutaneous metastatic nodules can be healed, thus confirming the results of previous studies. ECT efficacy is independent of tumor histology. The experience gathered in the ESOPE study allowed to prepare standard operating procedures that are key to the dissemination of the technology. ECT is safe effective, the treatment is completed in one session usually on an out-patient basis with minimum side-effects. ECT is cost-effective and, although palliative, it ameliorates patients' quality of life. ECT is the treatment of choice for tumors refractory to conventional treatment, can be used in form of cytoreductive therapy before conventional treatment for organ sparing and functions saving, finally can be adopted to treat hemorrhagic or painful nodules, it can be applied in previously irradiated areas.

Animals↗

Effects of molecular weight and surface functionalization on surface composition and cell adhesion to Hyaluronan coated titanium.

This paper describes the effect of surface functionalization on surface composition and cell adhesion to titanium samples by high and low molecular weight Hyaluronan (HA). HA was covalently linked to aminated Ti surfaces obtained by two different surface functionalization techniques, that is polyethyleneimine (PEI) adsorption and deposition from allylamine plasma. The two approaches yield very different surface densities of available amino groups, affecting this way the number and frequency of surface-HA bonds and the configurational freedom of the latter. Results of cell adhesion test are dependent on the surface functionalization approach adopted, low molecular weight HA coupled to PEI functionalized Ti does not yield the same degree of resistance to cell adhesion found on other samples. These results indicate that the details of the surface functionalization step are crucial for surface engineering of implant devices by biological molecules.

Allylamine↗

Proteoglycan synthesis in bovine articular cartilage explants exposed to different low-frequency low-energy pulsed electromagnetic fields.

OBJECTIVE: To investigate the role of pulsed electromagnetic field (PEMF) exposure parameters (exposure length, magnetic field peak amplitude, pulse frequency) in the regulation of proteoglycan (PG) synthesis of bovine articular cartilage explants. METHODS: Bovine articular cartilage explants were exposed to a PEMF (75 Hz; 2 mT) for different time periods: 1, 4, 9, 24 h. Then, cartilage explants were exposed for 24 h to PEMFs of different magnetic field peak amplitudes (0.5, 1, 1.5, 2 mT) and different frequencies (2, 37, 75, 110 Hz). PG synthesis of control and exposed explants was determined by Na2-35SO4 incorporation. RESULTS: PEMF exposure significantly increased PG synthesis ranging from 12% at 4 h to 17% at 24 h of exposure. At all the magnetic field peak amplitude values, a significant PG synthesis increase was measured in PEMF-exposed explants compared to controls, with maximal effect at 1.5 mT. No effect of pulse frequency was observed on PG synthesis stimulation. CONCLUSIONS: The results of this study show the range of exposure length, PEMF amplitude, pulse frequency which can stimulate cartilage PG synthesis, and suggest optimal exposure parameters which may be useful for cartilage repair in in vivo experiments and clinical application.

Animals↗

Effects of systemic glucocorticoid administration on tenocytes.

The effects of systemic administration of glucocorticoids (GC) on Achilles tendons of rats was studied. After the animal euthanasia, Achilles tendons were removed in sterile conditions from Sprague Dawley adult female rats to isolate tenocytes. Animals have been daily treated for 8 weeks with 4 mg/kg methylprednisolone or Sham-treated with saline solution. In vitro, cell proliferation (WST-1), extra-cellular matrix (ECM) synthesis (collagen type I, CICP; proteoglycans, PG; and fibronectin, FBN), and transforming growth factor (TGF-beta1) were evaluated at 3 and 7 days of culture. The effect of glucocorticoids (GC) on tenocytes was evident both at 3 and 7 days of culture, and caused a significant decreases in cell proliferation (P<0.01), CICP (P<0.01) and PG synthesis (P<0.01) as compared to NT tenocytes. In conclusion, GC systemic treatment seems to compromise the normal proliferation rate and synthetic activity of cultured tenocytes. This study was helpful in understanding the fundamental biological processes that occur during corticosteroid systemic administration and tenocyte cultures may be used to further study to improve knowledge of these cell behaviour also in the ambit of tendon tissue-engineered therapies.

Achilles Tendon↗

Bioabsorbable scaffold for in situ bone regeneration.

A non-porous poly-DL-lactide tubular chamber filled by demineralised bone matrix (DBM) and bone marrow stromal cells (BMSC) in combination, was evaluated as a scaffold for guided bone regeneration (GBR) in an experimental model using the rabbit radius. The tubular chamber had an internal diameter of 4.7 mm, a wall thickness of 0.4 mm and a length of 18 mm. Autologous BMSC were obtained, under general anaesthesia from rabbit iliac crest and isolated by centrifugation technique. Allogenic DBM was obtained from cortico-cancellous bone of rabbits. In general anaesthesia, a 10-mm defect was bilaterally created in the radii of 10 rabbits. On the right side (experimental side) the defect was bridged with the chamber filled with both BMSC and DBM. On the left side (control side) the defect was treated by positioning DBM and BMSC between the two stumps. At an experimental time of 4 months histology and histomorphometry demonstrated that the presence of a tubular chamber significantly improved bone regrowth in the defect The mean thickness of newly-formed bone inside the chamber was about 56.7+/-3.74% of the normal radial cortex, in comparison with 46.7+/-10.7% when DBM and BMSC without the chamber were placed in the defect, P<0.05). These results confirmed the effectiveness of the chamber as a container for factors promoting bone regeneration.

Absorbable Implants↗

In vitro corrosion study by EIS of an equiatomic NiTi alloy and an implant quality AISI 316 stainless steel.

The electrochemical impedance spectroscopy (EIS) technique was used for the study of the electrochemical behavior of an equiatomic NiTi alloy and an implant quality AISI 316 stainless steel type ASTM F138. Experiments were carried out using four different different test solutions: phosphate buffered saline (PBS), Dulbecco minimum essential medium (MEM), MEM + fetal calf serum (FCS), and MEM + fetal calf serum + fibroblast cell (CELL). Specimens were finished to 600-grit SiC paper and were tested in conditions that did not provoke abrupt mechanical damage of the passive film. Bode-phase spectra showed the presence of two maxima and were fitted with an equivalent circuit characterized by two parallel combinations (R, resistance; CPE, constant phase element). The R(1) and CPE(1) branch was assigned to the inner compact passive film and the R(2) and CPE(2) branch to the external porous film. The resistance of the inner film R(1), roughly corresponding to the polarization resistance (R(p)), which is inversely proportional to the material's corrosion rate, increased with the immersion time and was generally greater in PBS than in other media. With the exception of FCS solution, R(1) for NiTi alloy is better or similar to that of ASTM F138.

Biocompatible Materials↗

In vivo study on the healing of bone defects treated with bone marrow stromal cells, platelet-rich plasma, and freeze-dried bone allografts, alone and in combination.

The repair of confined trabecular bone defects in rabbits treated by autologous bone marrow stromal cells (BMSC), platelet-rich plasma (PRP), freeze-dried bone allografts (FDBA) alone and in combination (BMSC + PRP; FDBA + BMSC; FDBA + PRP; FDBA + PRP + BMSC) was compared. A critical size defect was created in the distal part of the femurs of 48 adult rabbits. Histology and histomorphometry were used in the evaluation of healing at 2, 4, and 12 weeks after surgery. The healing rate (%) was calculated by measuring the residual bone defect area. Architecture of the newly formed bone was compared with that of bone at the same distal femur area of healthy rabbits. The defect healing rate was higher in PRP + BMSC, FDBA + PRP, FDBA + BMSC, and FDBA + PRP + BMSC treatments, while lower values were achieved with PRP treatment at all experimental times. The highest bone-healing rate at 2 weeks was achieved with FDBA + PRP + BMSC treatment, which resulted significantly different from PRP (p < 0.05) and BMSC (p < 0.05) treatments. At 4 weeks, the bone-healing rate increased except for PRP treatment. Finally, the bone-healing rate of FDBA + PRP, FDBA + BMSC, and FDBA + PRP + BMSC was significantly higher than that of PRP at 12 weeks (p < 0.05). At 12 weeks, significant differences still existed between PRP, BMSC, and FDBA groups and normal bone (p < 0.05). These results showed that the combination of FDBA, BMSC and PRP permitted an acceleration in bone healing and bone remodeling processes.

Animals↗

A new chemical etching process to improve endosseous implant osseointegration: in vitro evaluation on human osteoblast-like cells.

The development of novel mechanical and chemical surface modification treatments to improve the osteointegration properties of osseointegrated dental implants is nowadays a topic of great applicative interest. The aim of the present study was to analyse the role of surface topography and chemistry of four different surface treatments on titanium by an in vitro human osteosarcoma immortalised cell line model (MG63). The surface treatments considered were (a) machined titanium, (b) chemical etched on machined titanium, (c) sandblasted titanium and (d) chemical etching on sandblasted titanium. Chemical and physical surface properties were investigated by Scanning Electron Microscopy, Thin Film-X ray Diffraction and by Laser Profilometry. The in vitro biological response was characterised using the MG63 cell line by elution cytotoxicity tests, cell morphology, adhesion, proliferation activity, alkaline phosphatase activity and total DNA content in order to show a relationship between osteoblast response and surface features. Chemical and physical characterisation showed that the considered treatments differently modify the surface morphology in the micro and sub-micrometric scale. Although some differences in alkaline phosphatase activity were observed in the biological characterisation, depending on the specific material's surface finishing, the results showed that cells were well responsive on all the tested materials and grew and differentiated with similar proliferation rate.

Air Abrasion, Dental↗

Resin-based dentin restorative materials under accelerated ageing: bio-functional behavior.

OBJECT: The aim of the present study was the evaluation of the effect of different polishing and finishing procedures on Filtek Z250 FZ ESPE restorative material. Particularly, the consequence of artificial aging (UV-irradiation) on this resin-based dental material was investigated determining also its outcome on cell behavior. METHODS: 96 specimens of restorative material were prepared using a light emitting diode curing unit and randomly divided into four finishing and polishing groups: (I) No treatment (FZ); (II) Identoflex rubbers (ID); (III) Enhance System (EN) and (IV) Sof-Lex Pop-on XT discs (SF). The surface morphology of native and artificially aged materials was assessed with Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM). FTIR and biological (biocompatibility and bacterial adhesion) analyses were also performed. RESULTS: Among all, the ID procedure represented an acceptable compromise for efficiency of polymerization and biocompatibility both before and after artificial ageing. SF and EN techniques showed better interactions with the biological environment. CONCLUSION: UV artificial ageing of the tested specimens has shown an acceleration of the surface degrading processes, favoring a possible decrease in the mechanical properties and the release of toxic free radicals. Finishing and polishing procedure seemed to affect the photodegrading pathways, even though no differences among the techniques were observed. As the cytotoxicity of materials undergoing accelerated aging is relevant, further improvement of dental restorative materials are required to limit the long-term biological damage.

Animals↗

In vitro evaluation of bio-functional performances of Ghimas titanium implants.

Titanium is the most widely used material for dental implants. The natural formation, in presence of oxygen, of different oxide films (passivation films) is correlated to titanium implant biocompatibility, resistance to corrosion and is responsible for implant bacteriostatic action. Surface roughness is another surface property of Ti-implants that, affecting implant-to-bone contact, improves integration. In the present study data concerning composition, surface roughness and biocompatibility of Ghimas implants and mini-implants undergoing sandblasting with Calcium Magnesium Carbonate (CaMg(CO3)2) are reported. AFM, SEM/EDX, XRD analyses and morpho-functional tests (MTT and ALP) were performed. Cell actin cytoskeletal modification (fluorescence phalloidin staining) was also observed with confocal laser microscopy (CLSM). Data related to surface geometry and chemical properties, associated with evidence of high purity of all the tested materials (XRD and EDX), highlighted the elevated biocompatibility of tested implants and mini-implants. CLSM investigation confirmed osteoblast features of an active cell behavior able to fit cell to chemico-mechanical stimuli present at the bone/implant interface and suggests an effective implant/alveolar bone integration in vivo.

Biocompatible Materials↗

Histomorphometric and mechanical analysis of the hydroxyapatite-bone interface after electromagnetic stimulation: an experimental study in rabbits.

We investigated the effect of stimulation with a pulsed electromagnetic field on the osseointegration of hydroxyapatite in cortical bone in rabbits. Implants were inserted into femoral cortical bone and were stimulated for six hours per day for three weeks. Electromagnetic stimulation improved osseointegration of hydroxyapatite compared with animals which did not receive this treatment in terms of direct contact with the bone, the maturity of the bone and mechanical fixation. The highest values of maximum push-out force (F(max)) and ultimate shear strength (sigma(u)) were observed in the treated group and differed significantly from those of the control group at three weeks (F(max); p < 0.0001; sigma(u), p < 0.0005).

Animals↗

Metabolic syndrome.

Metabolic and non metabolic cardiovascular risk factors tend to cluster in the same individual. The association of the cardiovascular risk factors is referred as metabolic syndrome (MS). This syndrome is associated with an increased risk of accelerated atherosclerosis and cardiovascular events. The cluster of cardiovascular risk factors of the MS includes: insulin resistance with or without glucose intolerance or diabetes, abdominal obesity, atherogenic dyslipidemia, elevated blood pressure, a proinflammatory and prothrombotic state. MS is one of the major issues in the management of cardiovascular disease because of its epidemic proportion and its impact on increasing risk of developing both cardiovascular disease and type 2 diabetes. The main therapeutic goal in the management of patients with the MS is to reduce risk for clinical cardiovascular events and to prevent type 2 diabetes. In particular, for individuals with established diabetes, risk factors management must be intensified to reduce their higher cardiovascular risk. Lifestyle changes have a critical role in the clinical management of the risk factors predisposing to MS, such as overweight/obesity, physical inactivity. A large body of evidence suggests the use of Metformin and Acarbose for the treatment of the syndrome as these drugs have consistently shown to reduce cardiovascular events and mortality. Most anti-hypertensive drugs have unfavorable metabolic profile while b-blockers, centrally acting agents and drugs targeting the renin angiotensin system should always be considered for the treatment of hypertension in patients with MS.

Atherosclerosis↗