Search PubMed⌕ Search

Biomedical subjects

M D Grynpas

Publications and source records attributed to M D Grynpas.

At least 19 recordsLinked to original sources

The genetic influence on bone susceptibility to fluoride.

INTRODUCTION: The influence of genetic background on bone architecture and mechanical properties is well established. Nevertheless, to date, only few animal studies explore an underlying genetic basis for extrinsic factors effect such as fluoride effect on bone metabolism. MATERIALS AND METHODS: This study assessed the effect of increasing fluoride doses (0 ppm, 25 ppm, 50 ppm, 100 ppm) on the bone properties in 3 inbred mouse strains that demonstrate different susceptibilities to developing enamel fluorosis (A/J a "susceptible" strain, 129P3/J a "resistant" strain and SWR/J an "intermediate" strain). Fluoride concentrations were determined in femora and vertebral bodies. Bone mineral density was evaluating through DEXA. Finally, three-point bend testing of femora, compression testing of vertebral bodies and femoral neck-fracture testing were performed to evaluate mechanical properties. RESULTS: Concordant with increasing fluoride dose were significant increases of fluoride concentration in femora and vertebral bodies from all 3 strains. Fluoride treatment had little effect on the bone mineral densities (BMD) in the 3 strains. Mechanical testing showed significant alterations in "bone quality" in the A/J strain, whereas moderate alterations in "bone quality" in the SWR/J strain and no effects in the 129P3/J strain were observed. CONCLUSION: The results suggest that genetic factors may contribute to the variation in bone response to fluoride exposure and that fluoride might affect bone properties without altering BMD.

Animals↗

Cyclic compressive mechanical stimulation induces sequential catabolic and anabolic gene changes in chondrocytes resulting in increased extracellular matrix accumulation.

Overcoming the limited ability of articular cartilage to self-repair may be possible through tissue engineering. However, bioengineered cartilage formed using current methods does not match the physical properties of native cartilage. In previous studies we demonstrated that mechanical stimulation improved cartilage tissue formation. This study examines the mechanisms by which this occurs. Application of uniaxial, cyclic compression (1 kPa, 1 Hz, 30 min) significantly increased matrix metalloprotease (MMP)-3 and MMP-13 gene expression at 2 h compared to unstimulated cells. These returned to constitutive levels by 6 h. Increased MMP-13 protein levels, both pro- and active forms, were detected at 6 h and these decreased by 24 h. This was associated with tissue degradation as more proteoglycans and collagen had been released into the culture media at 6 h when compared to the unstimulated cells. This catabolic change was followed by a significant increase in type II collagen and aggrecan gene expression at 12 h post-stimulation and increased synthesis and accumulation of these matrix molecules at 24 h. Mechanical stimulation activated the MAP kinase pathway as there was increased phosphorylation of ERK1/2 and JNK as well as increased AP-1 binding. Mechanical stimulation in the presence of the JNK inhibitor, SP600125, blocked AP-1 binding preventing the increased gene expression of MMP-3 and -13 at 2 h and type II collagen and aggrecan at 12 h as well as the increased matrix synthesis and accumulation. Given the sequence of changes, cyclic compressive loading appears to initiate a remodelling effect involving MAPK and AP-1 signalling resulting in improved in vitro formation of cartilage.

Animals↗

Effect of zoledronate on bone quality in the treatment of aseptic loosening of hip arthroplasty in the dog.

Periprosthetic bone loss, which is a direct cause of aseptic loosening in total hip arthroplasty (THA), can be suppressed by bisphosphonates. It is unknown how the quality of this bone is affected in the presence of both wear debris (from implant) and bisphosphonates. The objective of this study was to evaluate the effect of zoledronate (ZLN) on bone quality in the presence of wear debris [polyethylene (PE) particles] in a canine model of uncemented THA. Thirty dogs underwent THA, and aseptic loosening was induced via implantation of PE particles packed into the femoral component. For 26 weeks until sacrifice, two groups (each n = 10) received weekly injections of ZLN (low dose 2 mug/kg, high dose 10 mug/kg) and the third group (control) received saline. Histological and radiographic examinations were performed to evaluate the degree of implant reaction. Histomorphometry (static/dynamic) was performed to evaluate bone turnover. Back-scattered electron imaging was used to quantify the newly formed bone and to evaluate the mineralization distribution. Density fractionation and X-ray diffraction were used to evaluate mineral properties, while four-point bending was used to determine mechanical properties. A dose-dependent presence of newly formed subperiosteal bone was found, which appeared to be less mineralized than the adjacent cortical bone. The high-dose ZLN group showed decreased cortical porosity and turnover and increased mineralization profile, failure strength, and modulus. We conclude that ZLN affects some of the material properties of cortical bone and allows the newly formed subperiosteal bone to remain and therefore affect the overall quality of the bone.

Animals↗

A single application of cyclic loading can accelerate matrix deposition and enhance the properties of tissue-engineered cartilage.

OBJECTIVE: Mechanical stimulation is a widely used method to enhance the formation and properties of tissue-engineered cartilage. While studies have evaluated the responsiveness of chondrocytes to mechanical stimuli, little is known about how much stimulation is actually required. Thus, the purpose of this study was to investigate the effect of a single application of cyclic loading to chondrocytes on the formation and properties of in vitro-formed tissue. DESIGN: Isolated bovine articular chondrocytes were seeded on ceramic substrates in 3D culture and subjected to a single application of compressive cyclic loading at 1, 8 or 15 days after seeding. Once the time at which the chondrocytes were most sensitive to mechanical loading was determined, the effect of a single application on the synthesis and accumulation of matrix molecules as well as the mechanical properties of the in vitro-formed cartilage tissue was evaluated. RESULTS: Chondrocytes were more responsive to cyclic loading applied early in culture. Cyclic forces applied 24 h after the cultures were established increased collagen and proteoglycan syntheses (48 +/- 11% and 49 +/- 11%, respectively). This single application of cyclic loading also increased the accumulation of collagen (stimulated: 207 +/- 20 microg, control: 173 +/- 9 microg) and proteoglycans (stimulated: 302 +/- 24 microg, control: 270 +/- 14 microg) as well as improved the mechanical properties of the in vitro-formed tissue (twofold increase in equilibrium stress and modulus) determined 4 weeks after the applied stimulus. CONCLUSIONS: A single application of cyclic loading to chondrocytes early in culture increased matrix accumulation and enhanced the mechanical properties of the in vitro-formed tissue. This suggests that mechanical forces do not have to be applied intermittently over long periods of time to accelerate in vitro tissue formation.

Animals↗

The effects of vanadium treatment on bone in diabetic and non-diabetic rats.

Vanadium-based drugs lower glucose by enhancing the effects of insulin. Oral vanadium drugs are being tested for the treatment of diabetes. Vanadium accumulates in bone, though it is not known if incorporated vanadium affects bone quality. Nine- to 12-month-old control and streptozotocin-induced diabetic female Wistar rats were given bis(ethylmaltolato)oxovanadium(IV) (BEOV), a vanadium-based anti-diabetic drug, in drinking water for 12 weeks. Non-diabetic rats received 0, 0.25 or 0.75 mg/ml BEOV. Groups of diabetic rats were either untreated or treated with 0.25-0.75 mg/ml BEOV as necessary to lower blood glucose in each rat. In diabetic rats, this resulted in a Controlled Glucose group, simulating relatively well-managed diabetes, and an Uncontrolled Glucose group, simulating poorly managed diabetes. Plasma insulin, glucose and triglyceride assays assessed the diabetic state. Bone mineral density (BMD), mechanical testing, mineral assessment and histomorphometry measured the effects of diabetes on bone and the effects of BEOV on non-diabetic and diabetic bone. Diabetes decreased plasma insulin and increased plasma glucose and triglycerides. In bone, diabetes decreased BMD, strength, mineralization, bone crystal length, and bone volume and connectivity. Treatment was effective in incorporating vanadium into bone. In all treated groups, BEOV increased osteoid volume. In non-diabetic bone, BEOV increased cortical bone toughness, mineralization and bone formation. In controlled glucose rats, BEOV lowered plasma glucose and improved BMD, mechanical strength, mineralization, bone crystal length and bone formation rate. In poorly controlled rats, BEOV treatment slightly lowered plasma glucose but did not improve bone properties. These results suggest that BEOV improves diabetes-related bone dysfunction primarily by improving the diabetic state. BEOV also appeared to increase bone formation. Our study found no negative effects of vanadium accumulation in bone in either diabetic or non-diabetic rats at the dose given.

Absorptiometry, Photon↗

Assessment of teeth as biomarkers for skeletal fluoride exposure.

Skeletal fluorosis and dental fluorosis are diseases related to fluoride (F) ingestion. Bone is the largest storage site of F in our body. Therefore, bone F concentrations are considered biomarkers for total F body burden (exposure). However, difficult accessibility limits its use as a biomarker. Thus, a more accessible tissue should be considered and analyzed as a biomarker for total F body burden. The objective of this study, which was divided into two parts, was to evaluate teeth as a biomarker for skeletal F exposure. In part 1 of the study, 70 mice of three different strains (SWR/J, A/J and 129P3/J) were exposed to different levels of water fluoridation (0, 25, 50 and 100 ppm). Bone (femora and vertebrae) and teeth from these mice were then analyzed for F concentration using Instrumental Neutron Activation Analysis (INAA). In part 2 of the study, human teeth (enamel and dentin) and bone from 30 study subjects were collected and analyzed for F concentration using INAA. Study subjects lived in areas with optimum levels of water fluoridation (0.7 and 1 ppm) and underwent therapeutic extraction of their unerupted third molars. The values of bone and teeth F concentration were correlated for parts 1 and 2 of this study. The results showed that in the animal model, where animals were exposed to a wide range of F in their drinking water, tooth [F] correlated with bone [F]. However, no correlation was seen between bone and enamel F concentrations or between bone and dentin F concentrations in the human samples. Therefore, teeth are not good biomarkers for skeletal F exposure in humans when exposure is confined to optimum levels of F in the drinking water.

Adolescent↗

Tooth quality in dental fluorosis genetic and environmental factors.

Dental fluorosis (DF) affects the appearance and structure of tooth enamel and can occur following ingestion of excess fluoride during critical periods of amelogenesis. This tooth malformation may, depending on its severity, influence enamel and dentin microhardness and dentin mineralization. Poor correlation between tooth fluoride (F) concentration and DF severity was shown in some studies, but even when a correlation was present, tooth fluoride concentration explained very little of DF severity. This fact calls into question the generally accepted hypothesis that the main factor responsible for DF severity is tooth fluoride concentration. It has been shown previously that genetic factors (susceptibility to DF) play an important role in DF severity although DF severity relates to individual susceptibility to fluoride exposure (genetics), tooth fluoride concentration relates to fluoride ingestion (environmental). The objective of this study was to investigate the correlation between tooth fluoride concentration, DF severity, and tooth mechanical and materials properties. Three strains of mice (previously shown to have different susceptibility to DF) at weaning were treated with four different levels of F in their water (0, 25, 50, and 100 ppm) for 6 weeks. Mice teeth were tested for fluoride by instrumental neutron activation analysis (INAA), DF severity determined by quantitative light-induced fluorescence [QLF], and tooth quality (enamel and dentin microhardness and dentin mineralization). Tooth fluoride concentration (environment factor) correlated positively with DF severity (QLF) (rs=0.608), fluoride treatment group (rs=0.952). However, tooth fluoride concentration correlated negatively with enamel microhardness (rs=-0.587), dentin microhardness (rs=-0.268) and dentin mineralization (rs=-0.245). Dental fluorosis (genetic factor) severity (QLF) correlated positively with fluoride treatment (rs=0.608) and tooth fluoride concentration (rs=0.583). DF severity correlated negatively with enamel microhardness (rs=-0.564) and dentin microhardness (rs=-0.356). Genetic factors (DF severity) and the environmental factor (fluoride concentration in tooth structure) have similar influence on tooth biomechanical properties, whereas only the environmental factor has an influence on tooth material property (mineralization).

Administration, Oral↗

The immune regulatory protein B7-H3 promotes osteoblast differentiation and bone mineralization.

B7-H3, a member of the B7 family of the Ig superfamily proteins, is expressed on the surface of the antigen-presenting cells and down-regulates T cell functions by engaging an unknown counterreceptor on T cells. Although B7-H3 is ubiquitously expressed, its potential nonimmune functions have not been addressed. We found that B7-H3 is highly expressed in developing bones during embryogenesis and that its expression increases as osteoblast precursor cells differentiate into mature osteoblasts. In vitro bone formation by osteoblastic cells was inhibited when B7-H3 function was interrupted by the soluble recombinant protein B7-H3-Fc. Analysis of calvarial cells derived from neonatal B7-H3 knockout (KO) mice revealed normal numbers of osteoblast precursor cells possessing a normal proliferative capacity. However, the B7-H3-deficient calvarial cells exhibited impaired osteogenic differentiation, resulting in decreased mineralized bone formation in vitro. These results suggest that B7-H3 is required for the later phase of osteoblast differentiation. Although B7-H3 KO mice had no gross skeletal abnormalities, they displayed a lower bone mineral density in cortical (but not trabecular) bones compared with WT controls. Consistent with the reduced bone mineral density, the femurs of B7-H3 KO mice were more susceptible to bone fracture compared with those of WT mice. Taken together, these results indicate that B7-H3 and its unknown counterreceptor play a positive regulatory role in bone formation. In addition, our findings identified B7-H3 as another molecule that has a dual role in the bone-immune interface.

Animals↗

Medieval trabecular bone architecture: the influence of age, sex, and lifestyle.

Osteoporosis has become a growing health concern in developed countries and an extensive area of research in skeletal biology. Despite numerous paleopathological studies of bone mass, few studies have measured bone quality in past populations. In order to examine age- and sex-related changes in one aspect of bone quality in the past, a study was made of trabecular bone architecture in a British medieval skeletal sample. X-ray images of 5-mm-thick coronal lumbar vertebral bone sections were taken from a total of 54 adult individuals divided into three age categories (18-29, 30-49, and 50+ years), and examined using image analysis to evaluate parameters related to trabecular bone structure and connectivity. Significant age-related changes in trabecular bone structure (trabecular bone volume (BV/TV), trabecular number (Tb.N), trabecular separation (Tb.Sp), and anisotropic ratio (Tb.An)) were observed to occur primarily by middle age with significant differences between the youngest and two older age groups. Neither sex showed continuing change in trabecular structure between the middle and old age groups. Age-related changes in bone connectivity (number of nodes (N.Nd) and node-to-node strut length (Nd.Nd)) similarly indicated a change in bone connectivity only between the youngest and two older age groups. However, females showed no statistical differences among the age groups in bone connectivity. These patterns of trabecular bone loss and fragility contrast with those generally found in modern populations that typically report continuing loss of bone structure and connectivity between middle and old age, and suggest greater loss in females. The patterns of bone loss in the archaeological samples must be interpreted cautiously. We speculate that while nutritional factors may have initiated some bone loss in both sexes, physical activity could have conserved bone architecture in old age in both sexes, and reproductive factors such as high parity and extended periods of lactation could have played a key role in female bone maintenance in this historic population. The study of qualitative elements (such as trabecular architecture) is vital if we are to understand bone maintenance and fragility in the past.

Adolescent↗

Association between fluoride, magnesium, aluminum and bone quality in renal osteodystrophy.

INTRODUCTION: Trace elements are known to influence bone metabolism; however, their effects may be exacerbated in renal failure because dialysis patients are unable to excrete excess elements properly. Our study correlated bone quality in dialysis patients with levels of bone fluoride, magnesium, and aluminum. A number of studies have linked trace elements, including fluoride, magnesium, and aluminum, to the development of renal osteodystrophy (ROD). However, little is known about the relationship between trace elements and changes in bone quality in ROD patients. The purpose of this study was to examine bone quality in ROD patients, and correlate differences in bone quality to trace element concentrations in bone. Bone quality encompasses parameters that contribute to the mechanical integrity of the bone. METHODS: One hundred fifty-three anterior iliac crest bone biopsies from patients with ROD were examined and subdivided into five groups based on the pathological features. Parameters contributing to bone quality, such as bone structure and remodeling, connectivity, mineralization, and microhardness, were assessed and correlated to bone chemical composition. In addition, clinical symptoms of ROD were assessed and correlated with bone composition. RESULTS AND CONCLUSIONS: There were no differences in bone architecture between the different ROD bone groups; however, differences in bone mineralization and microhardness were observed. Increase in bone fluoride was associated with increased osteoid parameters and decreased bone microhardness. Bone mineralization and microhardness decreased with increasing bone magnesium content and intact parathyroid hormone (PTH) level. Moreover, bone magnesium increased with intact PTH levels. The relationship between PTH, bone magnesium, mineralization, and microhardness was primarily observed in aplastic bone disorder. Furthermore, bone magnesium and aluminum contents were positively associated with bone pain and proximal myopathy in these patients. Most importantly, fluoride, magnesium, and aluminum showed significant correlations with one another. These results suggested that in ROD, bone fluoride may diminish bone microhardness by interfering with mineralization. Magnesium may be involved in the suppression of PTH secretion, lowering bone turnover thus leading to an increase in bone mineralization profile and microhardness in aplastic bone disorder. The effects of fluoride and magnesium on bone quality may be exacerbated by their interaction with aluminum.

Aluminum↗

The steroidal aromatase inhibitor exemestane prevents bone loss in ovariectomized rats.

The irreversible steroidal aromatase inhibitor exemestane (EXE) is one of three third generation aromatase inhibitors currently prescribed for advanced breast cancer in postmenopausal women. Its principal mechanism of action is to reduce estrogen by inhibiting its synthesis. In addition to its efficacy against breast cancer, its effects on other organs are important, especially when given to women with good-prognosis breast cancer or potentially to healthy women at increased risk of developing breast cancer. The purpose of this study was to evaluate the effects of EXE on bone and lipid metabolism in ovariectomized (OVX) rats. Ten-month-old Sprague-Dawley female rats were sorted into intact controls, intact + EXE, OVX controls, and OVX + EXE groups, and treated by weekly intramuscular injection with vehicle or 100 mg/kg EXE for 16 weeks. The bone mineral density (BMD), mechanical testing, histomorphometry, bone resorption marker-serum pyridinoline (PYD), and bone formation marker-serum osteocalcin (OC) were used to determine the effects of treatment on bone. In addition, total serum cholesterol, triglyceride, high-density lipoprotein (HDL), and low-density lipoprotein (LDL) were determined. BMD of the lumbar spine and femur were 11% and 7%, respectively, higher in OVX animals given EXE than in OVX controls (all Ps<0.001). Significant increases in the bending strength and toughness of the femora as well as the compressive strength and elastic modulus of the vertebrae were observed in OVX rats given EXE (all Ps<0.02 vs. OVX controls). Trabecular bone volume (BV) was significantly higher in OVX rats treated with EXE than in OVX controls (P<0.0001). In OVX animals, EXE reduced the OVX-induced increase of serum PYD by 96% (P<0.0001), and the OVX-induced increase of serum OC was completely prevented by treatment with EXE. In OVX animals, EXE resulted in a 28% reduction of serum cholesterol (P<0.0001) and reduced LDL by 64% compared with OVX controls (P<0.0001). The positive results of EXE on bone and lipid metabolism in the OVX rat model merit further investigation of the effects of EXE in postmenopausal women.

Androstadienes↗

Is fluoride concentration in dentin and enamel a good indicator of dental fluorosis?

Despite some studies correlating dental fluorosis (DF) and fluoride (F) concentration in dental enamel, no information is available about DF and dentin F concentration. Our objective was to determine the correlation between teeth F concentration and DF severity in unerupted human 3rd molars, and the correlation between dentin and enamel F concentrations in the same tooth. Ninety-nine 3rd molars were studied-53 from Fortaleza, Brazil (F water, 0.7 ppm), 22 from Toronto (1.0 ppm), and 24 from Montreal (0.2 ppm). DF severity was evaluated according to the Thylstrup-Fejerskov Index, while F concentration was analyzed by Instrumental Neutron Activation Analysis. DF severity varied between TF0 and TF4, while F concentration ranged between 39 and 550 ppm in enamel and 101 and 860 ppm in dentin. Our results showed correlation between dentin F concentration and DF (r(S) = 0.316, p = 0.001), but no correlation between enamel F concentration and DF (r(S) = 0.154, p = 0.133). No correlation was observed between dentin and enamel F concentrations in the same tooth (r(S) = 0.064, p = 0.536).

Adult↗

Effect of strain rate on tensile properties of sheep disc anulus fibrosus.

We investigated the effect of loading rate on tensile properties of sheep bone-anulus-bone specimens in axial direction. Disc anulus Samples with adjacent bone attachments were prepared from lateral, posterior and anterior regions of sheep lumbar spinal segments. The specimens were then tested at different strain rates under non-destructive cyclic tensile loading followed by destructive tensile loading. Each specimen was prepared by embedding the bony parts in the polymethylmetacrylate (PMMA) exposing the anulus portion to support tension. The results of non-destructive cyclic tests indicated a decrease in the hysteresis energy loss as strain rate increased. In the destructive tests, no significant differences in ultimate stress, ultimate strain and strain energy density were observed at different strain rates or annulus locations. However, there was a significant increase in the modulus at linear region as strain rate increased. Two major modes of failure were observed; rupture in the anulus mid-substance and at the anulus-endplate junction. The former failure was more frequent with no clear pattern across strain rates and locations, while the latter failure at anulus-endplate junction occurred primarily at slow strain rates.

Animals↗

Chondrocyte interactions with porous titanium alloy and calcium polyphosphate substrates.

Chondrocytes maintain their phenotype and form cartilagenous tissue when cultured on calcium polyphosphate (CPP) or titanium alloy (Ti alloy), porous three-dimensional materials. To understand how these materials may influence chondrocyte phenotype and matrix synthesis, the early interactions of cultured cells with CPP and titanium alloy were examined. These were compared to chondrocytes grown in monolayer culture on tissue culture polystyrene, conditions in which cultured chondrocytes dedifferentiate and do not form cartilagenous tissue. Scanning electron microscopy of cells up to 72 h in culture showed that bovine chondrocytes on CPP, Ti alloy, and polystyrene were an admixture of round and spread cells. The spread cells on CPP and titanium alloy were not entirely flattened but maintained a polygonal shape. In contrast, spread chondrocytes in monolayer culture were flatter and significantly larger, a difference that was maintained even in the absence of serum. All cells cultured on CPP and Ti alloy exhibited subcortical ring-like distribution of actin filaments whereas the flattened cells on polystyrene showed actin filaments distributed throughout the cytoplasm. Cells on CPP and Ti alloy synthesized significantly less collagen and proteoglycans than cells cultured on polystyrene at 72 h of culture. In summary the cells on the porous three-dimensional materials differed from those on polystyrene in terms of cell morphology and size, actin cytoskeleton organization, and synthesis of selected matrix macromolecules. The data suggests that CPP and titanium alloy may mediate their effect by limiting cell spreading in part by favoring the maintenance of a ring-like actin distribution.

Actin Cytoskeleton↗

Porous calcium polyphosphate scaffolds for bone substitute applications in vivo studies.

Porous rods (6 mm in length and 4 mm in diameter) of calcium polyphosphate (CPP) made by gravity sintering of particles in the size ranges of 45-105, 105-150. and 150-250 microm and with initial volume percent porosity in the range of 35-45% were implanted in the distal femur of New Zealand white rabbits. In an initial experiment, four rabbits implanted with rods made from coarse particles (150-250 microm) were sacrificed at each of the following time points: 2 days, 2 weeks, 6 weeks and 12 weeks. In a subsequent experiment, 10 rabbits were implanted with rods made by sintering 45-105 microm particles and another 10 were made by using particles of 105-150 microm. These rabbits were sacrificed at 6 weeks (five rabbits) and 1 year (five rabbits). No adverse reaction was found histologically at any time point in either experiment. These experiments show that CPP macroporous rods can support bone ingrowth and that between 12 weeks and 1 year, the amount of bones formed is equivalent to the natural bone volume found at similar sites. The degradation of the CPP material is inversely proportional to the original particle size and is rapid initially (within the first 6 weeks) and slows down thereafter. In conclusion, this material seems to promote rapid bone ingrowth and can be tailored to degrade at a given rate in vivo to some degree through appropriate selection of the starting particle size.

Animals↗

Polycyclic aromatic hydrocarbons present in cigarette smoke cause bone loss in an ovariectomized rat model.

A number of epidemiological studies have suggested that cigarette smoking is a risk factor for osteoporosis. Benzo(a)pyrene (BaP) and 7,12-dimethylbenz(a)anthracene (DMBA) are polycyclic aromatic hydrocarbons (PAHs) found in the tar fraction of cigarette smoke, as well as in car exhaust and furnace gases. We hypothesized that BaP and DMBA are responsible, through interaction with the aryl hydrocarbon receptor (AhR), for the bone loss and fragility seen in smoking-related osteoporosis. In this study four groups of 9-month-old Sprague-Dawley rats were examined. An intact group served as controls. A second control was the ovariectomized (ovx) group. The third group (ovx + E(2)) were ovariectomized and also given a continuous basal dose of estrogen by implanted estrogen pellet (0.085 mg of 17beta-estradiol per rat). The fourth group (ovx + E(2) + BaP/DMBA) was ovariectomized with an estradiol pellet, and received subcutaneous injections of 250 microg/kg of BaP/DMBA weekly for 15 weeks. The loss of ovarian function allowed the study of a direct effect of BaP/DMBA on bone while the concomitant estrogen repletion prevented ovx-related bone loss. Dual-energy X-ray absorptiometry (DEXA), histomorphometry, image analysis, and mechanical testing were used to determine the effect of the treatments on bone. The DEXA results showed a significant (p < 0.05) decrease in bone mineral density compared with intact controls with both ovx alone and with ovx + E(2) + BaP/DMBA treatment. The ovx + E(2) rats were similar to the intact controls. The osteoid parameters showed a significant increase (p < 0.05) with BaP/DMBA addition vs. intact controls, mimicking the ovx rats. The ovx + E(2) rats had osteoid parameters comparable to those of intact rats. Bone connectivity was decreased in the ovx and ovx + E(2) + BaP/DMBA animals. Connectivity of the ovx + E(2) rats was comparable to that of intact animals. A decrease in failure force was seen in three-point bending for the ovx + E(2) + BaP/DMBA group and in vertebral compression in both the ovx and ovx + E(2) + BaP/DMBA groups vs. intact controls. The mechanical properties of the ovx + E(2) rats were similar to those of intact rats. These results demonstrate that BaP/DMBA causes a loss of bone mass and bone strength, possibly through an increase in bone turnover. This is the first in vivo study linking environmental toxicants, found in the tar fraction of cigarette smoke and in urban air pollution, to loss of bone mass and strength in estrogen-replete ovx rats.

Animals↗

Fabrication of porous calcium polyphosphate implants by solid freeform fabrication: a study of processing parameters and in vitro degradation characteristics.

Solid freeform fabrication (SFF) involves the creation of a solid 3-D object of desired shape by successively adding raw materials in particles or layers. Its use in fabricating surgical implants is being explored. The objective of this study was to determine the feasibility of using SFF to build porous parts of calcium polyphosphate (CPP), a linear condensed phosphate that has been suggested as a material for forming bioresorbable skeletal replacement implants. CPP powders (<25 microm in particle size) were added to an UV curable monomer (SOMOS 6110) at a solids loading of 25 vol %, with the addition of a commercial dispersant to prevent particle agglomeration and settling. Viscosity and cure depth measurements were performed to insure that CPP suspension met the requirements deemed necessary for use in SFF. The CPP suspension was bulk cured and sintered in molds in order to assess binder removal and sintering parameters. Using a three-point bend test, the ultimate bending strength and energy-to-fracture of sintered CPP samples simulating parts to be formed by this strategy were characterized. In vitro degradation studies using 0.1M of tris-buffered solution were performed to assess the effect of aging on mechanical properties of the samples as a function of the processing route and resulting structures. The polymer binder successfully was removed from the cured ceramic suspension by developing a procedure that combined slow heating rates with low temperature dwells. Sintering CPP at 585 degrees C for 1 h produced amorphous material samples with average porosity of 27.7 +/- 2.0%. Sintering CPP at 600 degrees C for 1 h produced a crystalline material with samples having an average porosity of 22.9 +/- 1.3%. Crystalline CPP was found to exhibit superior bend strength and toughness compared with amorphous CPP. Both samples experienced a decline in mechanical properties during in vitro degradation; however, the effects were more pronounced with the amorphous CPP samples. Amorphous CPP was found to degrade four times faster than crystalline CPP, as shown by high levels of phosphate present in the degradation solution and a noticeable increase in the porosity of the samples. Crystalline CPP was more resistant to attack as dissolution was limited to surface features of the sintered particles.

Biocompatible Materials↗

Induction of collagen mineralization by a bone sialoprotein--decorin chimeric protein.

The observation that hydroxyapatite (HA) formation from metastable solutions can be induced by nucleating proteins such as bone sialoprotein (BSP) suggests a possible treatment for bone defects. The introduction of a mixture of nucleating protein and type I collagen should result in a defect becoming filled with a mineralized collagenous matrix that is biologically and mechanically compatible and capable of being remodeled. To create a nucleating protein that would interact with collagen fibrils, we combined the putative collagen-binding site of mouse decorin with one of two putative HA-nucleating sites of pig BSP. The resulting chimeric protein induced the formation of HA crystals in a steady-state agarose gel system and bound with high affinity to fibrillar type I collagen. The addition of chimeric protein to collagen gels perfused with low concentrations of calcium and phosphate resulted in the deposition of large, apparently needle-shaped HA crystals on the surface of collagen fibrils. These findings suggest that the BSP-decorin chimeric protein could be capable of inducing the mineralization of collagen in vivo.

Animals↗