Search PubMed⌕ Search

Biomedical subjects

M C Reedy

Publications and source records attributed to M C Reedy.

43 records · Page 3Linked to original sources

Rigor crossbridge structure in tilted single filament layers and flared-X formations from insect flight muscle.

The averaged structure of rigor crossbridges in insect flight muscle has been studied in filtered images. Their three-dimensional structure has been deduced by relating tilt views of single filament layers in 25 nm longitudinal sections (myac layers and actin layers) to the flared-X appearance in 15 nm cross-sections showing single crossbridge levels. Tilting myac or actin layers around the filament axis makes crossbridges show one of two patterns. Beadlike densities appear either singly over thin filaments ("center-beading") or doubled and flanking thin filaments ("straddle-beading"). These express two different projections from the crossbridge-actin complexes as seen end-on in flared-X formations. Tannic acid/glutaraldehyde fixation gave improved actin preservation, showing, in 15 nm cross-sections, the long-pitch helical strands as "two-dot" profiles of consistent azimuth in the gaps between double chevrons. The azimuth in the flared-X arms was then inferred from lattice relationships, since it was not seen directly. The tangential attachment of comma-shaped crossbridges to the inferred actin dyad fits the binding geometry in recent actin-subfragment 1 complex reconstructions. However, averaged crossbridge structure differs between lead and rear members of double chevrons, unlike the uniform heads on decorated actin. In filtered images of myac layers, the lead bridges are dense and steeply angled; the rear chevron is seen as a dense bead over the thin filament with faint, less angled bars extending laterally. Actin layer images also suggest that rear and lead bridges differ in angle. Left and right flared-X arms are end-on views of lead and rear chevron bridges, respectively, and differ in shape. Improved fixation with tannic acid/glutaraldehyde allows us to distinguish three crossbridge domains in flared-X arms: (1) a dense bulb-like head merged into the thin filament; (2) a dense but thinner neck tangential to actin; and (3) a faint thin stem joining the necks to myosin filaments. Shape differences in lead and rear members between the head-neck-actin complexes are indicated by the names "L sigmoid" and "R dogleg". Within crossbridges, internal angles between the head-neck axis and the head-actin-head axis differ between sigmoid and dogleg by about 30 degrees, implying a flexible junction between bridge-head and bridge-neck. Lead and rear bridges are axially at least 13 nm apart on actin; the expected 60 degrees difference in azimuth is expressed by head-neck portions, but the head-actin-head axis rotates by only 30 degrees.(ABSTRACT TRUNCATED AT 400 WORDS)

Actins↗

Binding of myosin subfragment 1 to glycerinated insect flight muscle in the rigor state.

The binding of rabbit muscle myosin subfragment 1 (S1) to glycerinated insect flight muscle fibers has been studied by low-angle x-ray diffraction, quantitative sodium dodecyl sulfate gel electrophoresis, quantitative interference microscopy, and electron microscopy. Changes induced in the rigor x-ray diffraction pattern are consistent with the idea that vacant myosin-binding sites on thin filaments are filled by exogenous S1. Electron microscopy indicates that S1 permeates and labels fibers and fibrils completely. Electron micrographs also show that cross-bridges are not displaced by exogenous S1 under the conditions used, and this is supported by the unchanged mechanical stiffness of the S1-labeled fibers. The amount of bound S1, as measured by gel electrophoresis and interference microscopy, together with the magnitude of the intensity changes in the x-ray diffraction pattern, is consistent with a thick filament structure that contains four molecules of endogenous myosin per 14.5 nm of its length, but does not agree well with earlier estimates of six myosins per crown. Lack of information on possible inhibition of S1-binding by factors other than the presence of cross-bridges, e.g., troponin, render uncertain calculations of the number of attached cross-bridges in the rigor state. However, it appears that at least 75% of the endogenous myosin heads are attached. Occupancy of binding sites on thin filaments after incubation with S1 is high, probably greater than 85%, so that x-ray scattering from those parts of the structure that adhere to the symmetry of the thin filaments can be treated as diffraction from S1-decorated thin filaments. In addition, we show in thin flared X cross sections that exo-S1 heads bind to actin with the geometry described in decorated actin by Taylor, K.A., and L.A. Amos.

Actins↗

The presence of two skeletal muscle alpha-actinins correlates with troponin-tropomyosin expression and Z-line width.

Two species of alpha-actinin from rabbit fast skeletal muscles were identified with a monospecific antisera. Designated alpha-actinin1f and alpha-actinin2f, their distribution in muscles does not correlate with histochemically defined fast fiber type. Rather, the presence of each correlates with Z-line width and with the expression of different thin filament Ca2+-regulatory complexes. alpha-Actinin1f is expressed with troponin T 1f-alpha beta tropomyosin, and alpha-actinin2f with troponin T 2f-alpha 2 tropomyosin. CNBr peptide maps show that the fast alpha-actinin species differ in primary structure. In contrast, the slow alpha-actinin is indistinguishable from alpha-actinin1f. Further evidence for the similarity of alpha-actinin1f and slow alpha-actinin comes from electron microscopic studies which show that fibers that express these species exhibit thick Z-lines. So, unlike other contractile proteins, the multiple forms of alpha-actinin do not reflect the distinction between fast- and slow-twitch muscles.

Actinin↗

Co-ordinated electron microscopy and X-ray studies of glycerinated insect flight muscle. II. Electron microscopy and image reconstruction of muscle fibres fixed in rigor, in ATP and in AMPPNP.

This paper presents electron microscopy, supported by optical diffraction and filtering of images from 100 nm and 25 nm sections, to complement the companion report of X-ray diffraction monitoring (immediately preceding this article) performed on the same insect flight muscle specimens during fixation, dehydration and embedding. Glycerinated Lethocerus fibre bundles initially fixed in rigor, in ATP relaxing buffer, or in 1 mM AMPPNP at 2 degrees C, gave thin-section images from each state whose optical transforms match the distinctive X-ray diffraction patterns from the embedded samples. For rigor and relaxed states, this extends and confirms a long-known correlation between X-ray patterns and EM image regularities. For the AMPPNP state, such correlation is here fully developed for the first time, and involves a new and distinctive EM image pattern of the crossbridge array, clearly different from a previously reported structure in AMPPNP-treated muscles that appears identical to fixed relaxed muscle. We found this latter artifact of 'AMPPNP-relaxed structure' in many fibres from our best AMPPNP specimen, but could identify other fibres which retained the distinctive AMPPNP structure, known to be dominant in this specimen from the X-ray pattern. The true AMPPNP structure shows features of both the ATP-relaxed and rigor crossbridge patterns, not as separate patches, but hybridized uniformly along each filament and throughout each affected sarcomere and fibre. It presents a 14.5 nm repeat of striping and lateral projections along thick filaments, together with variously angled crossbridge attachments to actin that form a 38.7 nm repeat of diffuse chevrons or deltoids replacing the more clearly delinated rigor double chevrons. The associated optical transform has the typical AMPPNP features, that is, it has in common with rigor a strong 19.3 nm layer line and strong second to fourth row line sampling on the 38.7 nm layer line, it has in common with relaxed patterns a strong 14.5 nm meridional and layer line, but it uniquely shows no intensity at the first row line on the 38.7 nm layer line (the 10.3 X-ray reflection), where rigor and relaxed transforms always show high intensity. The processing artifacts which intensify the 10.3 reflection, and produce the weak 19.3 nm layer line (a gain of intensity for ATP but a loss for the AMPPNP state), throughout ATP specimens and in those analogue-treated fibres showing AMPPNP-relaxed structure, might indicate trapping and accumulation of minority populations within the native equilibrium distribution of crossbridge conformations in each nucleotide state.

Adenosine Triphosphate↗

Structure and paramyosin content of tarantula thick filaments.

Muscle fibers of the tarantula femur exhibit structural and biochemical characteristics similar to those of other long-sarcomere invertebrate muscles, having long A-bands and long thick filaments. 9-12 thin filaments surround each thick filament. Tarantula muscle has a paramyosin:myosin heavy chain molecular ratio of 0.31 +/- 0.079 SD. We studied the myosin cross-bridge arrangement on the surface of tarantula thick filaments on isolated, negatively stained, and unidirectionally metal-shadowed specimens by electron microscopy and optical diffraction and filtering and found it to be similar to that previously described for the thick filaments of muscle of the closely related chelicerate arthropod, Limulus. Cross-bridges are disposed in a four-stranded right-handed helical arrangement, with 14.5-nm axial spacing between successive levels of four bridges, and a helical repeat period every 43.5 nm. The orientation of cross-bridges on the surface of tarantula filaments is also likely to be very similar to that on Limulus filaments as suggested by the similarity between filtered images of the two types of filaments and the radial distance of the centers of mass of the cross-bridges from the surfaces of both types of filaments. Tarantula filaments, however, have smaller diameters than Limulus filaments, contain less paramyosin, and display structure that probably reflects the organization of the filament backbone which is not as apparent in images of Limulus filaments. We suggest that the similarities between Limulus and tarantula thick filaments may be governed, in part, by the close evolutionary relationship of the two species.

Animals↗

Three-dimensional reconstruction of rigor insect flight muscle from tilted thin sections.

Rigor cross-bridges show two conformations paired within each 38.7-nm axial repeat. The two forms may express two stages of the cross-bridge cycle during contraction. Differing numbers of myosin heads per cross-bridge and associated helical changes in the thin filament distinguish the two forms and suggest that both myosin heads usually bind to a single thin filament.

Actins↗