Search PubMed⌕ Search

Biomedical subjects

M C Lin

Publications and source records attributed to M C Lin.

At least 19 recordsLinked to original sources
PubMed2006

Experimental and theoretical investigation of rate coefficients of the reaction S(3P)+OCS in the temperature range of 298-985 K.

The reaction S(3P)+OCS in Ar was investigated over the pressure range of 50-710 Torr and the temperature range of 298-985 K with the laser photolysis technique. S atoms were generated by photolysis of OCS with light at 248 nm from a KrF excimer laser; their concentration was monitored via resonance fluorescence excited by atomic emission of S produced from microwave-discharged SO2. At pressures less than 250 Torr, our measurements give k(298 K)=(2.7+/-0.5)x10(-15) cm3 molecule-1 s-1, in satisfactory agreement with a previous report by Klemm and Davis [J. Phys. Chem. 78, 1137 (1974)]. New data determined for 407-985 K connect rate coefficients reported previously for T>or=860 and T or=500 Torr, the reaction rate was enhanced. Theoretical calculations at the G2M(CC2) level, using geometries optimized with the B3LYP6-311+G(3df) method, yield energies of transition states and products relative to those of the reactants. Rate coefficients predicted with multichannel Rice-Ramsperger-Kassel-Marcus (RRKM) calculations agree satisfactorily with experimental observations. According to our calculations, the singlet channel involving formation of SSCO followed by direct dissociation into S2(a 1Deltag)+CO dominates below 2000 K; SSCO is formed via intersystem crossing from the triplet surface. At low temperature and under high pressure the stabilization of OCS2, formed via isomerization of SSCO, becomes important; its formation and further reaction with S atoms partially account for the observed increase in the rate coefficient under such conditions.

Journal Article↗
PubMed2006

Quantum chemical prediction of reaction pathways and rate constants for dissociative adsorption of CO(x) and NO(x) on the graphite (0001) surface.

We present predictions of reaction rate constants for dissociative adsorption reactions of CO(x) (x = 1, 2) and NO(x) (x = 1, 2) molecules on the basal graphite (0001) surface based on potential energy surfaces (PES) obtained by the integrated ONIOM(B3LYP:DFTB-D) quantum chemical hybrid approach with dispersion-augmented density functional tight binding (DFTB-D) as low level method. Following an a priori methodology developed in a previous investigation of water dissociative adsorption reactions on graphite, we used a C(94)H(24) dicircumcoronene graphene slab as model system for the graphite surface in finite-size molecular structure investigations, and single adsorbate molecules reacting with the pristine graphene sheet. By employing the ONIOM PES information in RRKM theory we predict reaction rate constants in the temperature range between 1,000 and 5,000 K. We find that among CO(x) and NO(x) adsorbate species, the dissociative adsorption reactions of CO(2) and both radical species NO and NO(2) are likely candidates as a cause for high temperature oxidation and erosion of graphite (0001) surfaces, whereas reaction with CO is not likely to lead to long-lived surface defects. High temperature quantum chemical molecular dynamics simulations (QM/MD) at T = 5,000 K using on-the-fly DFTB-D energies and gradients confirm the results of our PES study.

Journal Article↗
PubMed2006

Characterization of O2-CeO2 interactions using in situ Raman spectroscopy and first-principle calculations.

Interactions between O(2) and CeO(2) are examined experimentally using in situ Raman spectroscopy and theoretically using density-functional slab-model calculations. Two distinct oxygen bands appear at 825 and 1131 cm(-1), corresponding to peroxo- and superoxo-like species, respectively, when partially reduced CeO(2) is exposed to 10 % O(2). Periodic density-functional theory (DFT) calculations aid the interpretation of spectroscopic observations and provide energetic and geometric information for the dioxygen species adsorbed on CeO(2). The O(2) adsorption energies on unreduced CeO(2) surfaces are endothermic (0.91<DeltaE(ads)<0.98 eV), while those on reduced surfaces are exothermic (-4. 0<DeltaE(ads)<-0.9 eV), depending on other relevant surface processes such as chemisorption and diffusion into the bulk. Partial reduction of surface Ce(4+) to Ce(3+) (together with formation of oxygen vacancies) alters geometrical parameters and, accordingly, leads to a shift in the vibrational frequencies of adsorbed oxygen species compared to those on unreduced CeO(2). Moreover, the location of oxygen vacancies affects the formation and subsequent dissociation of oxygen species on the surfaces. DFT predictions of the energetics support the experimental observation that the reduced surfaces are energetically more favorable than the unreduced surfaces for oxygen adsorption and reduction.

Journal Article↗
PubMed2006

A computational study on the kinetics and mechanism for the unimolecular decomposition of o-nitrotoluene.

The kinetics and mechanism for the unimolecular decomposition of o-nitrotoluene (o-CH(3)C(6)H(4)NO(2)) have been studied computationally at the G2M(RCC, MP2)//B3LYP/6-311G(d, p) level of theory in conjunction with rate constant predictions with RRKM and TST calculations. The results of the calculations reveal 10 decomposition channels for o-nitrotoluene and its six isomeric intermediates, among them four channels give major products: CH(3)C(6)H(4) + NO(2), C(6)H(4)C(H)ON (anthranil) + H(2)O, CH(3)C(6)H(4)O (o-methyl phenoxy) + NO, and C(6)H(4)C(H(2))NO + OH. The predicted rate constants in the 500-2000 K temperature range indicate that anthranil production, taking place initially by intramolecular H-abstraction from the CH(3) group by NO(2) followed by five-membered ring formation and dehydration, dominates at temperatures below 1000 K, whereas NO(2) elimination becomes predominant above 1100 K and CH(3)C(6)H(4)O formation by the nitro-nitrite isomerization/decomposition process accounts for only 5-11% of the total product yield in the middle temperature range 800-1300 K. The branching ratio for CH(2)C(6)H(4)NO formation by the decomposition process of CH(2)C(6)H(4)N(O)OH is negligible. The predicted high-pressure-limit rate constants with the rate expression of 4.10 x 10(17) exp[-37000/T] s(-1) for the NO(2) elimination channel and 9.09 x 10(12) exp[-25800/T] s(-1) for the H(2)O elimination channel generally agree reasonably with available experimental data. The predicted high-pressure-limit rate constants for the NO and OH elimination channels are represented as 1.49 x 10(14) exp[-30000/T] and 1.31 x 10(15) exp[-38000/T] s(-1), respectively.

Journal Article↗
PubMed2006

Experimental and theoretical studies of the phenyl radical reaction with propene.

The kinetics for the reaction of C6H5 with propene has been measured by cavity ring-down spectrometry (CRDS) at temperatures 296-496 K under an Ar pressure of 40 Torr. The total rate constant can be given by the following Arrhenius expression (in units of cm3 mol(-1) s(-1)): k(C6H5 + C3H6) = 10(11.93+/-0.06) exp[-(1512 +/- 51)/T]. Density functional and higher level of theory calculations (up to the G2M level) have been carried out to provide additional insights about the mechanism of this reaction, and we also performed transition state theory (TST) calculation for the rate constant prediction. Our theoretical kinetic calculations predict that the C6H5 addition to the terminal =CH2 site in propene is dominant at the temperature range of our CRDS measurements. However, the H-abstraction channel forming benzene and the allyl radical becomes increasingly important at higher temperatures. The total high-pressure limiting rate constant calculated on the basis of the G2M reaction barriers is in reasonable agreement with the experimental values.

Journal Article↗
PubMed2006

Theoretical study on the kinetics and mechanism for the reaction of FCO with NO.

The radical reaction mechanism of FCO + NO on the ground electronic state energy surface has been studied at the G2M level of theory based on the geometric parameters optimized at the B3LYP/6-311+G(d) level of theory. The two kinds of reaction pathways include the direct fluorine abstraction channel producing CO + FNO and the association channel forming the FC(O)NO complex. The former has a distinct barrier of 8.9 kcal mol(-1), while the latter is a barrierless association process. The rate constant of this reaction system in the temperature range 200-3000 K has been calculated by the microcanonical VTST/RRKM theory. The theoretical result shows that the predicted total rate constants exhibit a negative-temperature dependence and positive-pressure effect at lower temperatures. Under the experimental conditions, the predicted values are in good agreement with the experimental results. In addition, the predicted branching ratios clearly indicate that the dominant product channel is the formation of FC(O)NO at low temperatures and FNO + CO at high temperatures (>500 K).

Journal Article↗
PubMed2006

Mechanisms of the reactions of W AND W+ with H2O: computational studies.

The mechanism of the reactions of W and W(+) with the water molecule have been studied for several lower-lying electronic states of tungsten centers at the CCSD(T)/6-311G(d,p)+SDD and B3LYP/6-31G(d,p)+SDD levels of theory. It is shown that these reactions are essentially multistate processes, during which lower-lying electronic states of the systems cross several times. They start with the formation of initial prereaction M(H(2)O) complexes with M-H(2)O bonding energies of 9.6 and 48.2 kcal/mol for M = W and W(+), followed by insertion of the metal center into an O-H bond with 20.0 and 53.3 kcal/mol barriers for neutral and cationic systems, respectively. The overall process of M + H(2)O --> t-HM(OH) is calculated to be highly exothermic, 48.4 and 48.8 kcal/mol for M = W and W(+). From the HM(OH) intermediate the reaction may proceed via several different channels, among which the stepwise HM(OH) --> HMO + H --> (H)(2)MO and concerted HM(OH) --> (H)(2)MO pathways are more favorable and can compete (energetically) with each other. For the neutral system (M = W), the concerted process is the most favorable, whereas for the charged system (M = W(+)), the stepwise pathway is slightly more favorable. From the energetically most favorable intermediate (H)(2)MO the reactions proceed via H(2)-molecule formation with a 53.1 kcal/mol activation barrier for the neutral system. For the cationic system, H-H formation and dissociation is an almost barrierless process. The overall reaction of W and W(+) with the water molecule leading to H(2) + MO formation is found to be exothermic by 48.2 and 39.8 kcal/mol, respectively. In the gas phase with the collision-less conditions the reactions W((7)S) + H(2)O --> H(2) + WO((3)Sigma(+)), and W(+)((6)D) + H(2)O --> H(2) + WO(+)((4)Sigma(+)) are expected to proceed via a 10.4 and 5.1 kcal/mol overall energy barrier corresponding to the first O-H dissociation at the TS1. On the basis of these PESs, we predict kinetic rate constants for the reactions of W and W(+) with H(2)O.

Journal Article↗
PubMed2006

Reactions of hydrazoic acid and trimethylindium on TiO2 rutile (110) surface: a computational study on the formation of the first monolayer InN.

This article reports the result of a computational study on the reaction of hydrazoic acid and trimethylindium (TMIn), coadsorbed on TiO2 rutile (110) surface. The adsorption geometries and energies of possible adsorbates including HN3-In(CH3)3(a) and its derivatives, HN3-In(CH3)2(a), N3-In(CH3)2(a), N3-In(CH3)(a), and N-In(a), have been predicted by first-principles calculations based on the density functional theory (DFT) and the pseudopotential method. The mechanisms of these surface reactions have also been explicitly elucidated with the computed potential energy surfaces. Starting from the interaction of three stable HN3 adsorbates, HN3-Ob(a), H(N2)N-Ob(a), and Ti-NN(H)N-Ob(a), where Ob is the bridged O site on the surface, with two stable intermediates from the adsorption and dissociative adsorption of TMIn, (H3C)3In-Ob(a) and (H3C)2In-Ob(a)+H3C-Ob(a), InN products can be formed exothermically via four reaction paths following the initial barrierless In-atom association with the N atom directly bonded to H, by CH4 elimination (with approximately 40 kcal/mol barriers), the InN-N bond breaking and the final CH3 elimination or migration (with <20 kcal/mol barriers). These Langmuir-Hinshelwood processes producing the two most stable InN(a) side-on adsorptions confirm that HN3 and TMIn are indeed very efficient precursors for the deposition of InN films on TiO2 nanoparticles. The result of similar calculations for the reactions occurring by the Rideal-Eley mechanism involving HN3(a)+TMIn(g) and HN3(g)+TMIn(a) indicates that they are energetically less favored and produce the less stable InN(a) with end-on configurations.

Journal Article↗
PubMed2006

Ab initio kinetics for the unimolecular reaction C6H5OH --> CO + C5H6.

The unimolecular decomposition of C(6)H(5)OH on its singlet-state potential energy surface has been studied at the G2M//B3LYP/6-311G(d,p) level of theory. The result shows that the most favorable reaction channel involves the isomerization and decomposition of phenol via 2,4-cyclohexadienone and other low-lying isomers prior to the fragmentation process, producing cyclo-C(5)H(6) + CO as major products, supporting the earlier assumption of the important role of the 2,4-cyclohexadienone intermediate. The rate constant predicted by the microcanonical RRKM theory in the temperature range 800-2000 K at 1 Torr--100 atm of Ar pressure for CO production agrees very well with available experimental data in the temperature range studied. The rate constants for the production of CO and the H atom by O-H dissociation at atmospheric Ar pressure can be represented by k(CO) = 8.62 x 10(15) T(-0.61) exp(-37,300/T) s(-1) and k(H) = 1.01 x 10(71) T(-15.92) exp(-62,800/T) s(-1). The latter process is strongly P-dependent above 1000 K; its high- and low-pressure limits are given.

Journal Article↗
PubMed2005

Reactions of trimethylindium on TiO2 nanoparticles: experimental and computational study.

This article reports the results of an experimental and computational study on the reaction of trimethylindium, In(CH3)(3), adsorbed on TiO2 nanoparticle films. Experimentally, Fourier transform infrared (FTIR) spectra have been measured by varying In(CH3)(3) dosing pressure, UV irradiation time in the absence and presence of oxygen, and surface annealing temperature on both "clean" and HO-covered TiO2 nanoparticle films. Computationally, adsorption energies, molecular structures, and vibrational frequencies of possible adsorbates have been predicted by first-principles calculations based on the density functional theory (DFT) and the pseudopotential method. Three important reactions involving CH3 elimination, CH4 elimination, and CH3 migration from the adsorbed trimethylindium have been elucidated in detail. CH(3 migration is the only exothermic process with the lowest reaction barrier. On the basis of experimental and computational results, the two sharpest peaks at 2979 and 2925 cm(-1), detected in the dosage and UV irradiation experiments in the absence of oxygen, are attributable to the asymmetric and symmetric C-H vibrations of methyl groups in In(CH3)3(a) and its derivatives, (H3C)2In(a), H3CIn(a), and H3CO(a). In the UV irradiation experiment in the presence of oxygen, the methyl groups attached to the In atom were quickly oxidized to the methoxy with the C-H vibrations at 2925 and 2822 cm(-1) and to the carboxyl group with vibrations at 2888 cm(-1) (vs(CH)), 1577 cm(-1) (va(OCO)), 1380 cm(-1) (delta(CH)), and 1355 cm(-1) (vs(OCO)). Finally, from the computed energies with vibrational analysis, the adsorbed structure of the carboxyl group was confirmed to involve two oxygen atoms doubly adsorbed on two surface Ti atoms.

Journal Article↗
PubMed2005

Water clusters on graphite: methodology for quantum chemical a priori prediction of reaction rate constants.

The properties, interactions, and reactions of cyclic water clusters (H(2)O)(n=1-5) on model systems for a graphite surface have been studied using pure B3LYP, dispersion-augmented density functional tight binding (DFTB-D), and integrated ONIOM(B3LYP:DFTB-D) methods. Coronene C(24)H(12) as well as polycircumcoronenes C(96)H(24) and C(216)H(36) in monolayer, bilayer, and trilayer arrangements were used as model systems to simulate ABA bulk graphite. Structures, binding energies, and vibrational frequencies of water clusters on mono- and bilayer graphite models have been calculated, and structural changes and frequency shifts due to the water cluster-graphite interactions are discussed. ONIOM(B3LYP:DFTB-D) with coronene and water in the high level and C(96)H(24) in the low level mimics the effect of extended graphite pi-conjugation on the water-graphite interaction very reasonably and suggests that water clusters only weakly interact with graphite surfaces, as suggested by the fact that water is an excellent graphite lubricant. We use the ONIOM(B3LYP:DFTB-D) method to predict rate constants for model pathways of water dissociative adsorption on graphite. Quantum chemical molecular dynamics (QM/MD) simulations of water clusters and water addition products on the C(96)H(24) graphite model are presented using the DFTB-D method. A three-stage strategy is devised for a priori investigations of high temperature corrosion processes of graphite surfaces due to interaction with water molecules and fragments.

Journal Article↗
PubMed2005

Computational study on the mechanism and rate constant for the C6H5 + C6H5NO reaction.

The reaction mechanism of C6H5 + C6H5NO involving four product channels on the doublet-state potential energy surface has been studied at the B3LYP/6-31+G(d, p) level of theory. The first reaction channel occurs by barrierless association forming (C6H5)2NO (biphenyl nitroxide), which can undergo isomerization and decomposition. The second channel takes place by substitution reaction producing C12H10 (biphenyl) and NO. The third and fourth channels involve direct hydrogen abstraction reactions producing C6H4NO + C6H6 and C6H5NOH + C6H4, respectively. Bimolecular rate constants of the above four product channels have been calculated in the temperature range 300-2000 K by the microcanonical Rice-Ramsperger-Kassel-Marcus theory and/or variational transition-state theory. The result shows the dominant reactions are channel 1 at lower temperatures (T < 800 K) and channel 3 at higher temperatures (T > 800 K). The total rate constant at 7 Torr He is predicted to be k(t) = 3.94 x 10(21) T(-3.09) exp(-699/T) for 300-500 K, 2.09 x 10(20) T(-3.56) exp(2315/T) for 500-1000 K, and 1.51 x 10(2) T(3.30) exp(-3043/T) for 1000-2000 K (in units of cm3 mol(-1) s(-1)), agreeing reasonably with the experimental data within their reported errors. The heats of formation of key products including biphenyl nitroxide, hydroxyl phenyl amino radical, and N-hydroxyl carbazole have been estimated.

Journal Article↗
PubMed2005

Ab initio studies of ClO(x) reactions: prediction of the rate constants of ClO+NO2 for the forward and reverse processes.

The potential-energy surface for the reaction of ClO with NO2 has been constructed at the CCSD(T)/6-311+G(3df)//B3LYP/6-311+G(3df) level of theory. Six ClNO3 isomers are located; these are ClONO2, pc-ClOONO, pt-ClOONO, OClNO2, pt-OClONO, pc-OClONO, with predicted energies relative to the reactants of -25.6, -0.5, 1.0, 1.9, 12.2 and 13.6 kcal mol-1, and heats of formation at 0 K of 7.8, 32.9, 34.4, 35.5, 45.6 and 47.0 kcal mol-1, respectively. Isomerizations among them are also discussed. The rate constants for the low-energy pathways have been computed by statistical theory calculations. For the association reaction producing exclusively ClONO2, the predicted low- and high-pressure-limit rate constants in N2 for the temperature range of 200-600 K can be represented by: (N2)=3.19 x 10-17 T-5.54 exp(-384 K/T) cm6 molecule-2 s-1 and =3.33 x 10-7 T-1.48 exp(-18 K/T) cm3 molecule-1 s-1. The predicted low- and high-pressure-limit rate constants for the decomposition of ClONO2 in N2 at 200-600 K can be expressed, respectively, by =6.08 x 1013 T-6.54 exp(-13813 K/T) cm3 molecule-1 s-1 and =4.59 x 1023 T-2.43 exp(-13437 K/T) s-1. The predicted values compare satisfactorily with available experimental data. The reverse Cl+NO3 reaction was found to be independent of the pressure, giving exclusively ClO+NO2; the predicted rate constant can be expressed as k(Cl+NO3)=1.19 x 10-9 T-0.60 exp(58 K/T) cm3 molecule-1 s-1..

Journal Article↗
PubMed2005

Experimental and theoretical studies of rate coefficients for the reaction O(3P)+CH3OH at high temperatures.

Rate coefficients of the reaction O((3)P) + CH(3)OH in the temperature range of 835-1777 K were determined using a diaphragmless shock tube. O atoms were generated by photolysis of SO(2) with a KrF excimer laser at 248 nm or an ArF excimer laser at 193 nm; their concentrations were monitored via atomic resonance absorption excited by emission from a microwave-discharged mixture of O(2) and He. The rate coefficients determined for the temperature range can be represented by the Arrhenius equation, k(T) = (2.29 +/- 0.18) x 10(-10) exp[-(4210 +/- 100)T] cm(3) molecule(-1) s(-1); unless otherwise noted, all the listed errors represent one standard deviation in fitting. Combination of these and previous data at lower temperature shows a non-Arrhenius behavior described as the three-parameter equation, k(T) = (2.74 +/- 0.07) x 10(-18)T(2.25 +/- 0.13) exp[-(1500 +/- 90)T] cm(3)molecule(-1) s(-1). Theoretical calculations at the Becke-3-Lee-Yang-Parr (B3LYP)6-311 + G(3df,2p) level locate three transition states. Based on the energies computed with coupled clusters singles, doubles (triples) [CCSD(T)]/6-311 + G(3df,2p)B3LYP6-311 + G(3df,2p), the rate coefficients predicted with canonical variational transition state theory with small curvature tunneling corrections agree satisfactorily with the experimental observations. The branching ratios of two accessible reaction channels forming OH + CH(2)OH (1a) and OH + CH(3)O (1b) are predicted to vary strongly with temperature. At 300 K, reaction (1a) dominates, whereas reaction (1b) becomes more important than reaction (1a) above 1700 K.

Journal Article↗
PubMed2005

Ab initio kinetics of the reaction of HCO with NO: abstraction versus association/elimination mechanism.

The kinetics and mechanism for the reaction of HCO with NO occurring by both singlet and triplet electronic state potential-energy surfaces (PESs) have been studied at the modified Gaussian-2 level of theory based on the geometric parameters optimized by the Becke-3 Lee-Yang-Parr/6-311G(d,p) method. There are two major reaction channels on both singlet and triplet PESs studied: one is direct H abstraction producing CO+HNO and the other is association forming a stable HC(O)NO (nitrosoformaldehyde) molecule. The dominant reaction is predicted to be the direct H abstraction occurring primarily by the lowest-energy path via a loose hydrogen-bonding singlet molecular complex, ON...HCO, with a 2.9-kcal/mol binding energy and a small decomposition barrier (1.9 kcal/mol). The commonly assumed HC(O)NO intermediate, predicted to lie below the reactants by 27.7 kcal/mol, has a high HNO-elimination barrier (34.5 kcal/mol). Bimolecular rate constants for the formation of the singlet products and their branching ratios have been calculated in the temperature range of 200-3000 K. The rate constant for the disproportionation process producing HNO+CO, found to be affected strongly by multiple reflections above the well of the complex at low temperature, is predicted to be k(HNO)=3.08 x 10(-12) T(0.10) exp(242T) for 200-500 K, and 1.72 x 10(-16) T(1.47) exp(888T) for 500-3000 K in units of cm(3) molecule(-1) s(-1). The high- and low-pressure rate constants for the association process forming HC(O)NO can be represented by k(infinity)=4.42 x 10(-11) T(0.25) exp(-28T) cm(3) molecule(-1) s(-1) (200-3000 K) and k(0)=7.30x10(-16) T(-5.75) exp(-719T) (200-1000 K) and 1.82 x 10(2) T(-11.92) exp(1846T) (1000-3000 K) cm(6) molecule(-2) s(-1) for N(2)-buffer gas. The absolute values of total rate constant, predicted to be weakly dependent negatively on temperature but positively on pressure, are in close agreement with most experimental data within their reported errors.

Journal Article↗
PubMed2005

Reaction mechanism and kinetics of the NCN+NO reaction: comparison of theory and experiment.

The rate constants for the NCN + NO reaction have been measured by laser photolysis/laser-induced fluorescence technique in the temperature range of 254-353 K in the presence of He (40-600 Torr) and N2 (30-528 Torr) buffer gases. The NCN radical was produced from the photodissociation of NCN3 at 193 nm and monitored with a dye laser at 329.01 nm. The reaction was found to be strongly positive-pressure dependent with negative-temperature dependence, as was reported previously. The experimental data could be reasonably accounted for by dual-channel Rice-Ramsperger-Kassel-Marcus calculations based on the predicted potential-energy surface using the modified Gaussian-2 method. The reaction is predicted to occur via weak intermediates, cis- and trans-NCNNO, in the 2A" state which crosses with the 2A' state containing more stable cis- and trans-NCNNO isomers. The high barriers for the fragmentation of these isomers and their trapping in the 2A' state by collisional stabilization give rise to the observed positive-pressure dependence and negative-temperature effect. The predicted energy barrier for the fragmentation of the cis-NCNNO (2A') to CN + N2O also allows us to quantitatively account for the rate constant previously measured for the reverse process CN + N2O --> NCN + NO.

Journal Article↗
PubMed2005

Computational study on the kinetics and mechanism for the unimolecular decomposition of C6H5NO2 and the related C6H5 + NO2 and C6H5O + NO reactions.

The kinetics and mechanisms for the unimolecular dissociation of nitrobenzene and related association reactions C(6)H(5) + NO(2) and C(6)H(5)O + NO have been studied computationally at the G2M(RCC, MP2) level of theory in conjunction with rate constant prediction with multichannel RRKM calculations. Formation of C(6)H(5) + NO(2) was found to be dominant above 850 K with its branching ratio > 0.78, whereas the formation of C(6)H(5)O + NO via the C(6)H(5)ONO intermediate was found to be competitive at lower temperatures, with its branching ratio increasing from 0.22 at 850 K to 0.97 at 500 K. The third energetically accessible channel producing C(6)H(4) + HONO was found to be uncompetitive throughout the temperature range investigated, 500-2000 K. The predicted rate constants for C(6)H(5)NO(2) --> C(6)H(5) + NO(2) and C(6)H(5)O + NO --> C(6)H(5)ONO under varying experimental conditions were found to be in good agreement with all existing experimental data. For C(6)H(5) + NO(2), the combination processes producing C(6)H(5)ONO and C(6)H(5)NO(2) are dominant at low temperature and high pressure, while the disproportionation process giving C(6)H(5)O + NO via C(6)H(5)ONO becomes competitive at low pressure and dominant at temperatures above 1000 K.

Journal Article↗