Search PubMed⌕ Search

Biomedical subjects

M C Kennedy

Publications and source records attributed to M C Kennedy.

At least 55 records · Page 3Linked to original sources
PubMed1990

17O, 1H, and 2H electron nuclear double resonance characterization of solvent, substrate, and inhibitor binding to the [4Fe-4S]+ cluster of aconitase.

17O electron nuclear double resonance (ENDOR) studies at X-band (9-GHz) and Q-band (35-GHz) microwave frequencies reveal that the [4Fe-4S]+ cluster of substrate-free aconitase [citrate (isocitrate) hydro-lyase, EC 4.2.1.3] binds solvent, HxO (x = 1, 2). Previous 17O ENDOR studies [Telser et al. (1986) J. Biol. Chem. 261, 4840-4846] had disclosed that Hx17O binds to the enzyme-substrate complex and also to complexes of enzyme with the substrate analogues trans-aconitate and nitroisocitrate (1-hydroxy-2-nitro-1,3-propanedicarboxylate). We have used 1H and 2H ENDOR to characterize these solvent species. We propose that the fourth ligand of Fea in substrate-free enzyme is a hydroxyl ion from the solvent; upon binding of substrate or substrate analogues at this Fea site, the solvent species becomes protonated to form a water molecule. Previous 17O and 13C ENDOR studies [Kennedy et al. (1987) Proc. Natl. Acad. Sci. U.S.A. 84, 8854-8858] showed that only a single carboxyl, at C-2 of the propane backbone of cis-aconitate or at C-1 of the inhibitor nitroisocitrate, coordinates to the cluster. Together, these results imply that enzyme-catalyzed interconversion of citrate and isocitrate does not involve displacement of an endogenous fourth ligand, but rather addition of the anionic carboxylate ligand and a change in protonation state of a solvent species bound to Fea. We further report the 17O hyperfine tensor parameters of the C-2 carboxyl oxygen of substrate bound to the cluster as determined by the field dependence of the 17O ENDOR signals. 17O ENDOR studies also show that the carboxyl group of the inhibitor trans-aconitate binds similarly to that of substrate.

Aconitate Hydratase↗
PubMed1990

Characterization of the [4Fe-4S]+ cluster at the active site of aconitase by 57Fe, 33S, and 14N electron nuclear double resonance spectroscopy.

57Fe, 33S, and 14N electron nuclear double resonance (ENDOR) studies have been performed to characterize the [4Fe-4S]+ cluster at the active site of aconitase. Q-band 57Fe ENDOLR of isotopically enriched enzyme, both substrate free and in the enzyme-substrate complex, reveals four inequivalent iron sites. In agreement with Mössbauer studies [Kent et al. (1985) J. Biol. Chem. 260, 6371-6881], one of the iron ions, Fea, which is easily removed by oxidation to yield the [3Fe-4S]+ cluster of inactive aconitase, shows a dramatic change in the presence of substrate. The remaining iron sites, Feb1,2,3, show minor changes when substrate is bound. Methods devised by us for analyzing and simulating ENDOR spectra of a randomly oriented paramagnet have been used to determine the principal values and orientation relative to the g tensor for the hyperfine tensors of three of the four inequivalent iron sites of the [4Fe-4S]+ cluster, Fea, Feb2, and Feb3, in the substrate-free enzyme and the enzyme-substrate complex. The full tensor for the fourth site, Feb1, could not be obtained because its signal is seen only over a limited range of the EPR envelope. 33S ENDOR data for the enzyme-substrate complex using enzyme reconstituted with 33S show that the four inorganic bridging sulfide ions of the [4Fe-4S]+ cube have isotropic hyperfine couplings of A(S) less than 12 MHz, and analysis indicates that they can be divided into two pairs, one with couplings of A(S1) approximately less than 1 MHz and the other with A(S2) approximately 6-12 MHz; the analysis further places these pairs within the cube relative to the iron sites. 33S data for substrate-free enzyme is qualitatively similar and can be completely simulated by two types of S2- ion, with A(S1) approximately 7.5 and A(S2) approximately 9 MHz; the full hyperfine tensors have been determined. The hyperfine values for the two enzyme forms correspond to surprisingly small unpaired spin density on S2-. 14N ENDOR at Q-band reveals a nitrogen signal that does not change upon substrate binding.

Aconitate Hydratase↗
PubMed1989

19th Sir Hans Krebs lecture. Engineering of protein bound iron-sulfur clusters. A tool for the study of protein and cluster chemistry and mechanism of iron-sulfur enzymes.

An increasing number of iron-sulfur (Fe-S) proteins are found in which the Fe-S cluster is not involved in net electron transfer, as it is in the majority of Fe-S proteins. Most of the former are (de)hydratases, of which the most extensively studied is aconitase. Approaches are described and discussed by which the Fe-S cluster of this enzyme could be brought into states of different structure, ligation, oxidation and isotope composition. The species, so obtained, provided the basis for spectroscopic and chemical investigations. Results from studies by protein chemistry, EPR, Mössbauer, 1H, 2H and 57Fe electron-nuclear double resonance spectroscopy are described. Conclusions, which bear on the electronic structure of the Fe-S cluster, enzyme-substrate interaction and the enzymatic mechanism, were derived from a synopsis of the recent work described here and of previous contributions from several laboratories. These conclusions are discussed and summarized in a final section.

Aconitate Hydratase↗
PubMed1989

Cysteine labeling studies of beef heart aconitase containing a 4Fe, a cubane 3Fe, or a linear 3Fe cluster.

The reactivity of cysteines following cluster destruction by iron chelation was investigated for [4Fe-4S]2+ and cubane [3Fe-4S]+ beef heart aconitase. When the chelator orthobathophenanthroline disulfonate was used, the formation of sulfur-sulfur bonds and the retention of inorganic sulfur from the cluster was observed. For both the 4Fe and 3Fe forms of aconitase, the two cysteines in peptide 7, the cysteine in peptide 3, and the cysteine in peptide 2 were found as the primary constituents of sulfur-sulfur bonds (the peptide sequences and nomenclature are from Plank, D. W., and Howard, J. B. (1988) J. Biol. Chem. 263, 8184-8189). Three of these four cysteines (peptides 3 and 7) correlated with those proposed to be cluster ligands recently determined by x-ray crystallography (Robbins, A. H. and Stout, C. D. (1989) Proteins, in press; Robbins, A. H., and Stout, C. D.,, (1989) Proc. Natl. Acad. Sci. U. S. A. 86, 3639-3643) for pig heart aconitase. A mechanism is proposed whereby the greater affinity of orthobathophenanthroline disulfonate for Fe2+ relative to Fe3+ shifts the equilibrium toward reduction of ferric iron through sulfur-sulfur bond formation at the cluster site. Aconitase which has been oxidized with ferricyanide and from which the cluster iron has been removed by EDTA has been shown to have two di- or polysulfides (Kennedy, M. C., and Beinert, H. (1988) J. Biol. Chem. 263, 8194-8198). The cysteines found in the sulfur-sulfur bonds generated by this treatment also were predominantly those from peptides 3 and 7. In addition, the putative thiol ligands for the linear [3Fe-4S]+ cluster of aconitase are reported. The four cysteines of peptides 7 and 9 (two in each peptide) were found to be protected by the cluster from alkylation when the protein was denatured. The difference in the ligands between the cubane and linear forms indicates that a specific thiol exchange occurs during the conversion.

Aconitate Hydratase↗
PubMed1989

Mössbauer study of the inactive Fe3S4 and Fe3Se4 and the active Fe4Se4 forms of beef heart aconitase.

Active beef heart aconitase contains an iron-sulfur cluster with an [Fe4S4]2+ core. This cluster can be converted into Fe3S4 with concomitant loss of enzymatic activity. We have reconstituted apo-aconitase with iron and selenide to obtain Fe4Se4 aconitase. The Se analog has higher catalytic activity than the native S-containing enzyme when isocitrate is the substrate. Oxidation of [Fe4Se4]2+ with ferricyanide yields the inactive [Fe3Se4]1+ form. The Se-containing 3-Fe cluster can be reduced to [Fe3Se4]0. We have studied the [Fe3S4]1+,0, [Fe3Se4]1+,0, and [Fe4Se4]2+ states with Mössbauer spectroscopy from 1.3 K to 200 K in magnetic fields up to 6.0 T. The spectra of the S- and Se-containing enzymes were found to be remarkably similar. The spectra of the 3-Fe clusters were analyzed and the salient features of the electronic structure are discussed.

Aconitate Hydratase↗
PubMed1988

The active site sulfhydryl of aconitase is not required for catalytic activity.

Previous reports have demonstrated that aconitase has a single reactive sulfhydryl at or near the active site (Johnson, P. G., Waheed, A., Jones, L., Glaid, A. J., and Gawron, O. (1977) Biochem. Biophys. Res. Commun. 74, 384-389). On the basis of experiments with phenacyl bromide in which enzyme activity was abolished while substrate afforded protection, it was concluded that this group was an essential sulfhydryl. We have further examined the reactivity of this group and confirmed the result that, when reagents with bulky groups (e.g. N-ethylmaleimide or phenacyl bromide) modify the protein at the reactive sulfhydryl, activity is lost. However, when smaller groups, e.g. the SCH3 from methylmethanethiosulfonate or the CH2CONH2 from iodoacetamide, are introduced, there is only partial (50%) or no loss of activity. Experiments were performed to obtain evidence that these reagents are modifying the same residue. Methylmethanethio-sulfonate-treated enzyme showed an increase in the Km for citrate from 200 to 330 microM. EPR spectra were taken of the reduced N-ethylmaleimide- and iodoacetamide-modified enzyme in the presence of substrate. The former gave a spectrum typical of the substrate-free enzyme, while the spectrum of the latter was identical to enzyme with bound substrate. We, therefore, conclude that modification of this sulfhydryl affects activity by interfering with the binding of substrate to the active site and is not essential in the catalytic process.

Acetophenones↗
PubMed1988

The state of cluster SH and S2- of aconitase during cluster interconversions and removal. A convenient preparation of apoenzyme.

During the interconversion of the various cluster types observed in aconitase ([4Fe-4S]1+,2+, [3Fe-4S]0,1+, cubane, or linear types) and production of apoenzyme, changes int he state of the sulfur ligands (RSH and S2-) are bound to occur. We have attempted to obtain information on such changes by interception of SH groups and/or by analysis of the resulting cluster or apoprotein for various forms of sulfur and enzymatic activity. During cluster interconversions no evidence was obtained for changes in SH titer that could be associated with cluster ligands. We conclude from this that the ligand exchange at the cluster is too rapid to allow trapping even by SH reagents of low Mr. The possibility that released SH becomes buried in the protein structure and unreactive cannot be entirely discounted. On formation of the apoenzyme by oxidation with ferricyanide, four SH groups per molecule became unavailable for reaction with 5,5'-dithiobis(2-nitrobenzoic acid); instead, while the holoenzyme contains no disulfides or S(0), two di- or polysulfides were found in the apoenzyme indicating that, on an average, four SH groups and three of the original four S(2-) ligands are trapped as RS-Sx-SR. In agreement with this conclusion is the fact that the apoenzyme can be reconstituted without addition of S(2-). A convenient preparative procedure for reconstitutable apoenzyme in 75% yield is [3Fe-4S] and [4Fe-4S] clusters with a variety of combinations of iron and sulfur isotopes as required for Mössbauer, resonance Raman, and electron nuclear double resonance studies.

Aconitate Hydratase↗
PubMed1987

Mode of substrate carboxyl binding to the [4Fe-4S]+ cluster of reduced aconitase as studied by 17O and 13C electron-nuclear double resonance spectroscopy.

The active form of aconitase has a diamagnetic [4Fe-4S]2+ cluster. A specific iron ion (Fea, which is lost during inactivation) is the binding site for substrate, as shown by Mössbauer spectroscopy. We have studied the mode of substrate and analogue binding at equilibrium to the paramagnetic [4Fe-4S]+ cluster of the reduced active form by 17O and 13C electron-nuclear double resonance spectroscopy with specifically labeled substrates. The data show that with substrate, only the carboxyl at C-2 of the propane backbone is strongly bound in addition to H2O or OH- (HxO) from the solvent, whereas in an isocitrate analogue that has a nitro group at C-2, the carboxyl and hydroxyl at C-1 are bound along with solvent HxO. We conclude from these data that, on addition of any one of the three substrates, cis-aconitate is the predominant species bound to Fea of the cluster along with solvent HxO and that cis-aconitate is bound in the citrate mode (carboxyl at C-2). The results with the nitro analogue show that the enzyme can also bind a substrate-like ligand to the cluster in the alternative isocitrate mode (carboxyl at C-1), as is implicit in models proposed for the aconitase reaction.

Aconitate Hydratase↗
PubMed1987

The Luria-Nebraska and Halstead-Reitan Neuropsychological Test batteries: a cross-cultural study in English and Arabic.

In the present study, the Luria-Nebraska and the Halstead-Reitan Neuropsychological Test batteries were administered to 112 male and female Arabic and English speaking Egyptians enrolled at the American University in Cairo. The aims of the study were to establish normative data, test the effects of language and order of administration upon performance, and examine practice effects and test-retest reliability of the two batteries. Only minimal differences were found between the Arabic and the English administrations. Results revealed strong test-retest reliability coefficients for the HRB and moderate ones for the LNNB. Practice effects were detected on six LNNB scales as well as on the HRB complex problem solving tests (Category and Tactual Performance Test). No other effects were detected. Thus, the initial performance on one battery did not interfere with nor enhance performance on the other battery.

Adolescent↗
PubMed1986

17O electron nuclear double resonance characterization of substrate binding to the [4Fe-4S]1+ cluster of reduced active aconitase.

To characterize the binding of substrate to aconitase, we have made 17O electron nuclear double resonance (ENDOR) measurements on reduced active ([4Fe-4S]1+) beef heart aconitase, both in H216O and H217O, in the presence of substrate and the inhibitors, tricarballylate, trans-aconitate, and 1-hydroxy-2-nitro-1, 3-propanedicarboxylate, referred to here as nitroisocitrate; the hydroxyl of the latter also was isotypically labeled with 17O. The hydroxyl oxygen of citrate and isocitrate is exchanged with solvent water by aconitase, but the hydroxyl of nitroisocitrate is not. Thus, the isotopic composition of nitroisocitrate can be chemically controlled, allowing direct identification of any 17O ENDOR signal associated with it. 17O ENDOR signals were observed from Hx17O (mean = 1 or 2) bound to the [4Fe-4S]1+ cluster in samples prepared with trans-aconitate and unlabeled nitroisocitrate. 17O-Labeled nitroisocitrate in H216O bound to the cluster showed a signal from the 17OH group; in H217O it showed 17O ENDOR resonances due to both Hx17O and 17OH of substrate. This result demonstrates that the cluster participates in substrate binding and can simultaneously coordinate the hydroxyl of a substrate (or analogue) and water (or hydroxyl). The sample with citrate in H217O showed only the Hx17O signal, although aconitase exchanges the hydroxyl of substrate with solvent water. The mechanism of action of aconitase is discussed in light of this observation. Comparison shows the ENDOR study to be in agreement with previous Mössbauer and EPR spectroscopic results.

Aconitate Hydratase↗
PubMed1985

Mössbauer studies of aconitase. Substrate and inhibitor binding, reaction intermediates, and hyperfine interactions of reduced 3Fe and 4Fe clusters.

Active beef heart aconitase contains a [4Fe-4S] cluster. One iron of the cluster, Fea, is labile and can be removed easily by oxidation in air to yield the [3Fe-4S]1+ cluster of inactive aconitase. We have previously shown that substrate binds to Fea. We have continued our Mössbauer studies by further investigating the active and inactive forms of the enzyme. When active aconitase, [4Fe-4S]2+, is mixed with substrate, two species (substrates or intermediates bound to Fea) labeled S1 and S2 are obtained. With the nitroanalogs of citrate and isocitrate, thought to be transition state analogs, and fluorocitrate, species S2, but not S1, is observed, suggesting that S2 represents a carbanion transition state complex. We have prepared Mössbauer samples by rapid mix/rapid freeze techniques. Using either citrate, isocitrate or cis-aconitate, the natural substrates, we have been able to detect at 0 degree C reaction intermediates in the 5-35 ms time range and, studying enzyme substrate interactions at subzero temperatures in a water/methanol/ethylene glycol solvent, we have observed new species when substrates were added at -60 degrees C. Details of these experiments are given, although in neither case can unique interpretations be offered at this time. We have also investigated reduced active aconitase ([4Fe-4S]1+; EPR at g = 1.94) in the presence of substrate with material selectively enriched with 57Fe in either Fea or the other three cluster sites. The spectra were analyzed with a spin Hamiltonian, and the results are discussed and interpreted in terms of three inequivalent Fe sites in the cluster. Finally, we have studied enzyme containing the reduced [3Fe-4S]0 cluster. There is no indication that citrate binds to the 3Fe cluster, and since no significant activity was observed, we conclude that aconitase containing a 3Fe cluster is not active in either oxidation state.

Aconitate Hydratase↗
PubMed1985

Development of a miniaturized, improved nucleic acid precursor incorporation assay for chemosensitivity testing of human solid tumors.

Two technological problems limit the usefulness of chemosensitivity assays: low success rates (generally 30-60%); and the requirement for large numbers of tumor cells (5 X 10(5)/dish). To solve these problems, we developed a miniaturized, improved, nucleic acid precursor incorporation assay (MINI-assay). In this new assay, 0.3-1.5 X 10(5) tumor cells were plated in double-layer agarose in 16-mm wells of a Costar (No. 3524) 24-well cluster dish. After 72 h of incubation, 5 microCi [3H]thymidine were added to each well. After an additional 24 h of incubation, the trichloroacetic acid-precipitable material was collected and counted by liquid scintillation. We found that 280 of 351 (80%) human solid tumors gave evaluable chemosensitivity results. Labeling efficiency was optimum when the plating density was between 1.5 and 3 X 10(4) cells/well. Radioisotope uptake was less efficient in 35-mm Petri dishes and in the 7-mm wells. The MINI-assay was particularly suitable for small specimens (less than 1 g) and for tumor types that usually yield small numbers of viable tumor cells (19 of 30 breast cancers and 56 of 71 sarcomas were evaluable). The artifacts of colony counting (cell clumps, debris, clots) were also eliminated with this assay. With high evaluability rates, the requirement of fewer cells, a short duration (5 days), and ease of quantitation, the MINI-assay is widely applicable to chemosensitivity testing in human tumors.

Agar↗
PubMed1984

Evidence for the formation of a linear [3Fe-4S] cluster in partially unfolded aconitase.

Beef heart aconitase, as isolated under aerobic conditions, is inactive and contains a [3Fe-4S]1+ cluster. On incubation at pH greater than 9.5 (or treatment with 4-8 M urea) the color of the protein changes from brown to purple. This purple form is stable and can be converted back in good yield to the active [4Fe-4S]2+ form by reduction in the presence of iron. Active aconitase is converted to the purple form at alkaline pH only after oxidative inactivation. The Fe/S2- ratio of purple aconitase is 0.8, indicating the presence of [3Fe-4S] clusters. The number of SH groups readily reacting with 5,5'-dithiobis(2-nitrobenzoic acid) is increased from approximately 1 in the enzyme as isolated to 7-8 in the purple form, indicating a partial unfolding of the protein. On conversion of inactive aconitase to the purple form, the EPR signal at g = 2.01 (S = 1/2) is replaced by signals at g = 4.3 and 9.6 (S = 5/2). Mössbauer spectroscopy shows that purple aconitase has high-spin ferric ions, each residing in a tetrahedral environment of sulfur atoms. The three iron sites are exchange-coupled to yield a ground state with S = 5/2. Analysis of the data within a spin coupling model shows that J13 congruent to J23 and 2 J12 less than J13, where the Jik describe the antiferromagnetic (J greater than 0) exchange interactions among the three iron pairs. Comparison of our data with those reported for synthetic Fe-S clusters (Hagen, K. S., Watson, A. D., and Holm, R. H., (1983) J. Am. Chem. Soc. 105, 3905-3913) shows that purple aconitase contains a linear [3Fe-4S]1+ cluster, a structural isomer of the S = 1/2 cluster of inactive aconitase. Our studies also show that protein-bound [2Fe-2S] clusters can be generated under conditions where partial unfolding of the protein occurs.

Aconitate Hydratase↗
PubMed1984

Molecular weight of beef heart aconitase and stoichiometry of the components of its iron-sulfur cluster.

Existing estimates of the molar content of iron and labile sulfide in aconitase are varying and deviate from integral numbers. The proposed model of the iron-sulfur cluster of inactive aconitase, suggesting it to contain a single [3Fe-4S] cluster, has prompted us to reinvestigate the basic physicochemical data of the enzyme to arrive at a more precise figure of the stoichiometry of Fe and S2-. The molecular weight of aconitase estimated from low speed sedimentation equilibrium was 80,900 +/- 2,200. Gel chromatography in 6 M guanidine HCl showed the presence of a single peptide chain of 710 residues, corresponding to a Mr of 78,400, while gel electrophoresis in presence of sodium dodecyl sulfate gave a value of 83,000. Both values are in reasonable agreement with the value obtained from sedimentation equilibrium. Protein determination by amino acid analyses, together with iron and sulfur analyses of 20 different preparations of greater than or equal to 95% purity, gives values of 2.9 +/- 0.2 Fe/mol and 3.9 +/- 0.2 S2-/mol. The data obtained are thus in agreement with the [3Fe-4S] model of the iron-sulfur cluster of inactive aconitase.

Aconitate Hydratase↗
PubMed1984

Incorporation of [35S]sulfide into the Fe-S cluster of aconitase.

Exchange of sulfide into the iron-sulfur cluster of beef heart aconitase was investigated using Na235S. After anaerobic incubation for minutes and up to 24 h, samples were freed of substances of low Mr by Sephadex G-50 and analyzed for protein, protein-bound Fe, S2-, total Fe-S cluster by EPR, and for radioactivity. The activated and the inactive enzyme exchange three S2- ions within 1-2 h at essentially equal rates. No further exchange is observed with the activated enzyme within 24 h, whereas with the inactive enzyme, (partial) exchange of one more S2- occurs slowly within 5-10 h. Exchange is facilitated at elevated pH, but then destruction of clusters also increases. During incubation of inactive enzyme with S2-, partial activation may occur because S2- can act as reductant. Thus, depending on conditions, we observed very low to substantial activities. There is a linear, positive correlation between activity developed and ratio of cluster bound Fe to S2-. When Fe and dithiothreitol are present together with S2- during incubation, the extent of S2-exchange generally is between 10 and 25%. Fe incorporation exceeds S2- exchange, with the difference between Fe and S2- incorporation consistently amounting to one Fe/cluster. It is suggested that this excess Fe represents the Fe ion taken up on completion of the [4Fe-4S] from the [3Fe-4S] structure. The ease of S2-exchange suggests that the Fe-S cluster of aconitase is readily accessible to solvent.

Aconitate Hydratase↗