Biomedical subjects

Lyudmila M Bronstein

Publications and source records attributed to Lyudmila M Bronstein.

8 recordsLinked to original sources

PubMed2006

Morphology of hybrid polystyrene-block-poly(ethylene oxide) micelles: analytical ultracentrifugation and SANS studies.

Morphology and structure of aqueous block copolymer solutions based on polystyrene-block-poly(ethylene oxide) (PS-b-PEO) of two different compositions, a cationic surfactant, cetyl pyridinium chloride (CPC), and either platinic acid (H2PtCl6.6H2O) or Pt nanoparticles were studied using a combination of analytical ultracentrifugation (AUC), transmission electron microscopy (TEM), and small angle neutron scattering (SANS). These studies combining methods contributing supplemental and analogous structural information allowed us to comprehensively characterize the complex hybrid systems and to discover an isotope effect when H2O was replaced with D2O. In particular, TEM shows formation of both micelles and larger aggregates after incorporation of platinic acid, yet the amount of aggregates depends on the H2PtCl6.6H2O concentration. AUC reveals the presence of micelles and micellar clusters in the PS-b-PEO block copolymers solution and even larger (supermicellar) aggregates in hybrids (with CPC). Conversely, SANS applied to D2O solutions of the similar species indicates that micelles are spherical and no other micellar species are found in block copolymer solutions. To reconcile the SANS and AUC data, we carried out AUC examination of the corresponding D2O block copolymer solutions. These measurements demonstrate a pronounced isotope effect on micelle aggregation and micelle size, i.e., no micelle aggregation in D2O solutions, revealing good agreement of AUC and SANS data.

Calorimetry, Differential Scanning↗

PubMed2005

Metalated diblock and triblock poly(ethylene oxide)-block-poly(4-vinylpyridine) copolymers: understanding of micelle and bulk structure.

The paper provides new insights into the structure of Pt-containing diblock and triblock copolymers based on poly(ethylene oxide) (PEO) and poly(4-vinylpyridine) (P4VP), using a combination of atomic force microscopy (AFM), X-ray diffraction (XRD), transmission electron microscopy (TEM), and anomalous small-angle X-ray scattering (ASAXS). Parallel studies using methods contributing supplemental structural information allowed us to comprehensively characterize sophisticated polymer systems during metalation and to exclude possible ambiguity of the data interpretation of each of the methods. AFM and TEM make available the determination of sizes of the micelles and of the Pt-containing micelle cores, respectively, while a combination of XRD, TEM, and ASAXS reveals Pt-nanoparticle size distributions and locations along with the structural information about the polymer matrix. In addition, for the first time, ASAXS revealed the organization of Pt-nanoparticle-filled diblock and triblock copolymers in the bulk. The nanoparticle characteristics are mainly determined by the type of block copolymer system in which they are found: larger particles (2.0-3.0 nm) are formed in triblock copolymer micelles, while smaller ones (1.5-2.5 nm) are found in diblock copolymer micelles. This can be explained by facilitated intermicellar exchange in triblock copolymer systems. For both systems, Pt nanoparticles have narrow particle size distributions as a result of a strong interaction between the nanoparticle surface and the P4VP units inside the micelle cores. The pH of the medium mainly influences the particle location rather than the particle size. A structural model of Pt-nanoparticle clustering in the diblock PEO-b-P4VP and triblock P4VP-b-PEO-b-P4VP copolymers in the bulk was constructed ab initio from the ASAXS data. This model reveals that nearly spherical micellar cores of about 10 nm in diameter (filled with Pt nanoparticles) aggregate forming slightly oblate hollow bodies with an outer diameter of about 40 nm.

Micelles↗

PubMed2005

Transformations of poly(methoxy hexa(ethylene glycol) methacrylate)-b-(2-(diethylamino)ethyl methacrylate) block copolymer micelles upon metalation.

Micelle transformations upon metalation (i.e., incorporation of metal compounds and metal nanoparticle formation) in poly(methoxy hexa(ethylene glycol) methacrylate)-block-poly((2-(diethylamino)ethyl methacrylate)), PHEGMA-b-PDEAEMA, solutions have been studied using transmission electron microscopy (TEM) and photon correlation spectroscopy (PCS). Three different methods for the formation of metalated micelles are compared: (A) dissolution of the block copolymers in pure water followed by incorporation of platinic acid (H(2)PtCl(6).6H(2)O), (B) micellization in acidic molecular solutions of block copolymers induced by interaction of the protonated amino groups with the PtCl(6)(2)(-) ions, and (C) incorporation of metal species in pH-induced micelles. The latter method leads to well-defined metalated micelles of 22-25 nm diameter containing nanoparticles with diameters of 1.3-1.5 nm. No nanoparticle aggregation is observed. Good agreement is obtained for the sizes of the platinic acid-containing micelles assessed by TEM and PCS.

Light↗

PubMed2005

Core-shell nanostructures from single poly(N-vinylcaprolactam) macromolecules: stabilization and visualization.

Formation of core-shell poly(N-vinylcaprolactam) (PVCL) single-molecule nanostructures due to interaction of PVCL with metal ions was studied using transmission electron microscopy, 13C NMR, and light scattering. This study demonstrates that addition of CoCl2 to PVCL in its globular conformation yields unimolecular core-shell polymer particles with the core decorated with Co(II) ions. The crucial condition for formation of well-defined unimolecular nanostructures is the presence of stable globular aggregates in aqueous solution. Moreover, the metal ions should have a sufficiently high coordination number (higher than 2) to provide a cross-linking and stabilization of the core.

Caprolactam↗

PubMed2005

Micellization in pH-sensitive amphiphilic block copolymers in aqueous media and the formation of metal nanoparticles.

Dynamic light scattering, potentiometric titration, transmission electron microscopy and atomic force microscopy have been used to investigate the micellar behaviour and metal-nanoparticle formation in poly(ethylene oxide)-block-poly(2-vinylpyridine), PEO-b-P2VP, poly(hexa(ethylene glycol) methacrylate)-block-poly(2-(diethylamino)ethyl methacrylate), PHEGMA-b-PDEAEMA, and PEO-b-PDEAEMA amphiphilic diblock copolymers in water. The hydrophobic block of these copolymers (P2VP or PDEAEMA) is pH-sensitive: at low pH it can be protonated and becomes partially or completely hydrophilic leading to molecular solubility whereas at higher pH micelles are formed. These micelles consist of a P2VP or PDEAEMA core and a PEO or PHEGMA corona, respectively, where the core forming amine units can incorporate metal compounds due to coordination. The metal compounds (e.g., H2PtCl6, K2PtCl6) can either be introduced in a micellar solution, where they are incorporated within the micelle core via coordination with functional groups, or can be added to a unimer solution at low pH, where they lead to a metal-induced micellization. In these micellar nanoreactors, metal nanoparticles nucleate and grow upon reduction with sizes in the range of a few nanometers as observed by TEM. The effect of the metal incorporation method on the characteristics of the micelles and of the synthesized nanoparticles is investigated.

Journal Article↗

PubMed2004

Influence of metalation on the morphologies of poly(ethylene oxide)-block-poly(4-vinylpyridine) block copolymer micelles.

Micellization of a poly(ethylene oxide)-block-poly(4-vinylpyridine) (PEO45-b-P4VP28) copolymer in water during metalation (incorporation of gold compounds and gold nanoparticle formation) with three types of gold compounds, NaAuCl4, HAuCl4, and AuCl3, was studied using dynamic light scattering (DLS) and transmission electron microscopy (TEM). The transformations of the PEO45-b-P4VP28 block copolymer micelles in water were found to depend on a number of parameters including the thermal history of the as-prepared block copolymer, the type of the metal compound, and the metal loading. For the HAuCl4-filled PE045-b-P4VP28 micelles, the subsequent reduction with hydrazine hydrate results in a significant fraction of rodlike micelles, suggesting that slow nucleation (confirmed by the formation of the large gold nanoparticles) and facilitated migration of gold ions yields the ideal conditions for sphere-to-rod micellar transition.

Journal Article↗

PubMed2004

Functional polymer colloids with ordered interior.

Polymer colloids with internal ordering were synthesized using hydrolytic condensation of octadecyl-dimethyl(3-trimethoxysilylpropyl)ammonium chloride (ODMACl) and a mixture of ODMACl and the trisodium salt of the triacetic acid N-(trimethoxysilylpropyl)ethylenediamine (TANED). The structure and morphology of these colloids were studied with small-angle X-ray scattering, transmission electron microscopy, nuclear magnetic resonance, sedimentation in ultracentrifuge; and other methods. When polymer colloids are obtained from a single precursor (ODMACl), their local structure, molecular weight characteristics, and morphology strongly depend on the reaction conditions, while lamellar ordering remains nearly unaffected. Use of a mixture of cationic and anionic silanes (ODMACl and TANED) as precursors in hydrolytic condensation results in novel zwitterionic copolymer colloids with two-dimensional hexagonal packing. Interaction of the ODMACl quaternary ammonium groups with the three carboxy groups of TANED leads to replacement of sodium and chloride ions and formation of gegenions, resulting in a molar ratio ODMACl:TANED = 3:1 (each TANED molecule contains three carboxy groups). Due to their ordered interior, polyODMACl (PODMACl) and PODMACl-TANED colloids can be used as templates for controlled positioning of nanoparticles within these colloids. For example, lamellar ordering controls Pt nanoparticle formation within PODMACl colloids providing Pt nanoparticle alignment within the lamellar structure. Loading of PODMACl-TANED colloids with iron salts followed by pH increase results in the formation of iron oxide nanoparticles located within PODMACl-TANED cylinders.

Journal Article↗

PubMedDate not supplied

Structure and ionic interactions of organic-inorganic composite polymer electrolytes studied by solid-state NMR and Raman spectroscopy.

Solid-state NMR studies of composite polymer electrolytes are reported. The materials consist of polyethylene oxide and an organic inorganic composite, together with a lithium salt, and are candidates for electrolytes in solid-state lithium ion batteries. Silicon and aluminum MAS and multiple quantum MAS are used to characterize the network character of the organic-inorganic composite, and spin diffusion measurements are used to determine the nanostructure of the polymer/composite blending. Multiple quantum spin counting is used to measure the ion aggregation. The NMR results are supported by Raman spectra, calorimetry, and impedance spectroscopy. From these experiments it is concluded that the composite suppresses polymer crystallization without suppressing its local mobility, and also suppresses the tendency for the ions to aggregate. This polymer composite thus appears very promising for application in lithium ion batteries.

Aluminum↗