Biomedical subjects

Ludovic Richert

Publications and source records attributed to Ludovic Richert.

7 recordsLinked to original sources

PubMed2006

Imaging cell interactions with native and crosslinked polyelectrolyte multilayers.

The adhesion of primary chondrocytes to polyelectrolyte multilayer films, made of poly(l-lysine) (PLL) and hyaluronan (HA), was investigated for native and crosslinked films, either ending by PLL or HA. Crosslinking the film was achieved by means of a water-soluble carbodiimide in combination with N-hydroxysulfosuccinimide. The adhesion of macrophages and primary chondrocytes was investigated by microscopical techniques (optical, confocal, and atomic), providing useful information on the cell/film interface. Native films were found to be nonadhesive for the primary chondrocytes, but could be degraded by macrophages, as could be visualized by confocal laser scanning microscopy after film labeling. Confocal microscopy images show that these films can be deformed by the chondrocytes and that PLL diffuses at the chondrocyte membrane. In contrast, the cells adhered and proliferated well on the crosslinked films, which were not degraded by the macrophages. These results were confirmed by a MTT test over a 6-d period and by atomic force microscopy observations. We thus prove that chemical crosslinking can dramatically change cell adhesion properties, the cells being more stably anchored on the crosslinked films.

Animals↗

PubMed2005

Polyelectrolyte multilayers functionalized by a synthetic analogue of an anti-inflammatory peptide, alpha-MSH, for coating a tracheal prosthesis.

Polyelectrolyte multilayer films made of poly (L-lysine) (PLL) and poly (L-glutamic acid) (PGA) have been functionalized by covalent binding of a synthetic analogue of the anti-inflammatory peptide, alpha-melanocyte-stimulating hormone (alpha-MSH) to PGA to create biologically active coatings for tracheal prostheses. The morphology and in vivo stability of the films were investigated by atomic force microscopy and confocal laser scanning microscopy, respectively. For the in vivo evaluation, 87 rats were implanted and examined for a period superior to 3 months. Histological analysis, performed 1 month after implantation, showed a fibroblast colonization of the periprosthetic side and a respiratory epithelium type on the endoluminal side of the implant for all the polyelectrolyte coatings tested. However, for prostheses modified by PGA ending multilayer films, a more regular and less obstructive cell layer was observed on the endoluminal side compared to those modified by PLL ending films. Systemic anti-inflammatory IL-10 production was only detected in rats implanted with prostheses functionalized by alpha-MSH, demonstrating, in vivo, the anti-inflammatory activity of the embedded peptide into multilayer architectures.

Animals↗

PubMed2004

Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects.

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.

Animals↗

PubMed2003

3-D surface charges modulate protrusive and contractile contacts of chondrosarcoma cells.

Up to now, most of the studies addressing the critical roles played by protrusive and contractile cell-matrix contacts in cell adhesion, guidance, migration, matrix assembly, and activation of signaling molecules have been performed on two-dimensional surfaces. Here, we analysed the organization of chondrosarcoma cell contacts in a new three-dimensional environment made of titanium beads. Surface charges were modified by deposition of polyelectrolyte multilayer films built up by alternated polycations poly-(L-lysine) or poly(allylamine hydrochloride) and polyanions poly-(L-glutamic acid) or poly(sodium 4-styrenesulfonate). Negatively charged 3-D titanium surfaces amplified the occurrence and length of cell protrusions. These protrusions had pseudopod characteristics extended to 200 microm in length, growing off the substratum to distant beads. Pseudopod formation is inhibited by the exocytosis inhibitor concanamycin A and is triggered by a secreted factor. Chondrosarcoma cells adhering on uncoated or on negatively charged surfaces contained discrete focal spots of vinculin and actin cables. In cells plated onto these surfaces, phosphorylation of p44/42 MAPK/ERK was twofold increased. In contrast, no cytoskeletal vinculin and actin organization was observed when the surface was positively charged. These data suggest that chondrosarcoma cells adapt a more stable adhesion on uncoated or negatively charged surfaces. This point may be critical in tissue engineering strategies designed for cartilage repair.

Actins↗

PubMedDate not supplied

Improvement of stability and cell adhesion properties of polyelectrolyte multilayer films by chemical cross-linking.

Poly(L-lysine)/hyaluronan (PLL/HA) films were chemically cross-linked with a water soluble carbodiimide (EDC) in combination with a N-hydroxysulfo-succinimide (NHS) to induce amide formation. Fourier transform infrared spectroscopy confirms the conversion of carboxylate and ammonium groups into amide bonds. Quartz crystal microbalance-dissipation reveals that the cross linking reaction is accompanied by a change in the viscoelastic properties of the films leading to more rigid films. After the cross-linking reaction, both positively and negatively ending films exhibit a negative zeta potential. It is shown by fluorescence recovery after photobleaching measured by confocal laser scanning microscopy that cross-linking dramatically reduces the diffusion of the PLL chains in the network. Cross linking also renders the films highly resistant to hyaluronidase, an enzyme that naturally degrades hyaluronan. Finally, the adhesion of chondrosarcoma cells on the films terminating either with PLL or HA is also investigated. Whereas the non cross-linked films are highly resistant to cell adhesion, the cells adhere and spread well on the cross-linked films.

Cell Adhesion↗

PubMedDate not supplied

Degradability of polysaccharides multilayer films in the oral environment: an in vitro and in vivo study.

Biomedical devices and modified biomaterial surfaces constitute an expanding research domain in the dental field. However, such oral applications have to face a very particular environment containing specific physiological conditions and specific enzymes. To evaluate their suitability in the development of novel oral applications, the degradability of polyelectrolyte multilayer films made of the natural polysaccharides chitosan and hyaluronan (CHI/HA) was investigated in vitro and in vivo in a rat mouth model. The films were either native or cross-linked using a water-soluble carbodiimide (EDC) in combination with N-hydroxysulfosuccinimide. The in vitro degradation of the films by different enzymes present in the oral environment, such as lysozyme and amylase, was followed by quartz crystal microbalance measurements and confocal laser scanning microscopy observations after being film labeled with CHI(FITC). Whereas native films were subjected to degradation by all the enzymes, cross-linked films were more resistant to enzymatic degradation. Films were also put in contact with whole saliva, which induced a slow degradation of the native films over an 18 h period. The in vivo degradation of the films deposited on polymer disks and sutured in the rat mouth was followed over a 3 day period. Whereas film degradation is fast for native films, it is much slower for the cross-linked ones. More than 60% of these films remained on the disks after 3 days in the mouth. Taken together, these results suggest that the multilayer films made of natural polysaccharides are of high potential interest for oral applications, especially as drug release systems, offering various degradation rates and consequent release characteristics.

Animals↗

PubMedDate not supplied

Elasticity of native and cross-linked polyelectrolyte multilayer films.

Mechanical properties of polyelectrolyte multilayer films were studied by nanoindentation using the atomic force microscope (AFM). Force-distance measurements using colloidal probe tips were systematically obtained for supported films of poly(L-lysine) and hyaluronan that are suited to bio-application. Both native and covalently cross-linked films were studied as a function of increasing layer number, which increases film thickness. The effective Young's modulus perpendicular to the film, Eperpendicular, was determined to be a function of film thickness, cross-linking, and sample age. Thick PEM films exhibited a lower Eperpendicular than thinner PEM, whereas the Young's modulus of cross-linked films was more than 10-fold larger than native films. Moduli range from approximately 20 kPa for native films up to approximately 800 kPa for cross-linked ones. Young's moduli increased slightly with sample age, plateauing after approximately 4 weeks. Spreading of smooth muscle cells on these substrates with pre-attached collagen proved to be highly dependent on film rigidity with stiffer films giving greater cell spreading.

Cross-Linking Reagents↗