Biomedical subjects

Liju Yang

Publications and source records attributed to Liju Yang.

At least 19 recordsLinked to original sources

PubMed2006

Performance evaluation of a low conductive growth medium (LCGM) for growth of healthy and stressed Listeria monocytogenes and other common bacterial species.

The performance of a low conductive growth medium (LCGM) (conductivity of <1300 microS) was evaluated for its ability to support growth of food borne bacterial pathogens including Listeria monocytogenes and to determine the expression of the two key virulence proteins in L. monocytogenes for possible applications in an impedance-based microfluidic biochip detection platform. Growth of Listeria was monitored spectrophotometrically and the lag phase, generation time, growth rate and maximum population density were determined using the Gompertz equation. LCGM had a lag phase of 2.3 h and showed a higher cell density compared to Luria Bertini (LB) broth. Length of lag phase was highly dependent on initial inoculum concentrations. The changes in conductivity with respect to growth in the low conductive medium were monitored using a conductivity probe. L. monocytogenes growth could be detected within 2 h (0.1 mS) in LCGM and within 6 h in LB. The performance of the media was also evaluated for the recovery of Listeria cells exposed to various stresses as 42 degrees C for 1, 2 or 6 h, an osmotic stress in 10.5% NaCl, an acidic stress at pH 2, 3 or 5 and a combined stress of 10.5% NaCl, pH 5 and 1 h exposure at 42 degrees C. The recovery rate was comparable with that of Tryptic soy broth containing yeast extract (TSBYE). L. monocytogenes in LCGM supported the expression of two key virulence markers, actin polymerization protein (ActA) and internalin B (InlB), which could be detected using specific antibodies. In general LCGM also supported the growth of several other bacterial species suggesting its implication in microbial quality monitoring of products. In conclusion, LCGM is a sensitive low conductive medium that supports the growth as well as the expression of virulence markers for potential applications in sensitive detection of L. monocytogenes or other food borne pathogens in impedance-based sensor platform.

Colony Count, Microbial↗

PubMed2006

A multifunctional micro-fluidic system for dielectrophoretic concentration coupled with immuno-capture of low numbers of Listeria monocytogenes.

In this study, we demonstrated a micro-fluidic system with multiple functions, including concentration of bacteria using dielectrophoresis (DEP) and selective capture using antibody recognition, resulting in a high capture efficiency of bacterial cells. The device consisted of an array of oxide covered interdigitated electrodes on a flat silicon substrate and a approximately 16 microm high and approximately 260 microm wide micro-channel within a PDMS cover. For selective capture of Listeria monocytogenes from the samples, the channel surface was functionalized with a biotinylated BSA-streptavidin-biotinylated monoclonal antibody sandwich structure. Positive DEP (at 20 V(pp) and 1 MHz) was used to concentrate bacterial cells from the fluid flow. DEP could collect approximately 90% of the cells in a continuous flow at a flow rate of 0.2 microl min(-1) into the micro-channel with concentration factors between 10(2)-10(3), in sample volumes of 5-20 microl. A high flow rate of 0.6 microl min(-1) reduced the DEP capture efficiency to approximately 65%. Positive DEP attracts cells to the edges of the electrodes where the field gradient is the highest. Cells concentrated by DEP were captured by the antibodies immobilized on the channel surface with efficiencies of 18 to 27% with bacterial cell numbers ranging from 10(1) to 10(3) cells. It was found that DEP operation in our experiments did not cause any irreversible damage to bacterial cells in terms of cell viability. In addition, increased antigen expression (antigens to C11E9 monoclonal antibody) on cell membranes was observed following the exposure to DEP.

Antibodies, Monoclonal↗

PubMed2006

Pediatric reference intervals for bone markers.

Bone markers are specific bone-derived molecules that reflect bone remodeling activity and can be classified into two categories: bone formation and bone resorption markers. Children have significantly elevated bone marker levels due to high skeletal growth velocity and rapid bone turnover during childhood growth. Many physiological and pathological processes may influence bone metabolism and bone marker concentrations during childhood growth. Measurements of bone markers may be useful in investigating skeletal diseases in children and monitoring the response to treatment. This review documents recent advances in analytical methods, preanalytical considerations related to each marker and particularly highlights the most valuable bone formation markers, bone alkaline phosphatase and osteocalcin, and bone resorption markers, pyridinium cross-links and cross-linked telopeptides. Age- and sex-specific pediatric reference intervals and their limitations in clinical application are also discussed.

Biomarkers↗

PubMed2006

Polarized Th2 cytokine production in patients with hypertrophic scar following thermal injury.

Following thermal injury, hypertrophic scar (HSc) is a frequent and severe form of fibrosis of the skin, which limits movement and compromises the cosmetic appearance and function of the skin. Prolonged pruritus and dysesthesia are also common problems in the previously injured, fibrotic tissues, as current understanding of the pathogenesis is limited, and few effective therapies exist, as with other fibroproliferative disorders (FPD). To investigate the role of T cells and their cytokines in the development of HSc, intracellular cytokine synthesis of circulating T cells was measured serially in burn patients using flow cytometry from the time of injury to over a 1-year period during which many patients developed HSc. Within 1 month of injury, low interferon-gamma (IFN-gamma)-positive T cells (Th1) were found in association with low interleukin-12 (IL-12) and absent IFN-gamma cytokine levels in the serum. IL-4-positive Th 2 cells, however, were significantly increased compared with normal controls by 2 months postinjury. In burn patients with HSc, serum IL-10 and transforming growth factor-beta (TGF-beta) levels were also significantly increased early after burn injury in patients who later developed HSc compared with normal volunteers and with a subset of burn patients who did not develop HSc, before returning to normal levels after 6 months. Activated peripheral blood mononuclear cells (PBMC) demonstrated that mRNA for IFN-gamma was present only in normal volunteers or patients without HSc but was undetectable in HSc patients. IL-4 mRNA levels were increased in the PBMCs of burn patients with HSc. In HSc tissues, IL-4 mRNA was increased, whereas, IFN-gamma mRNA was reduced compared with normal skin and mature scar. Increased CD3(+) and CD4(+) cells were present in HSc tissues compared with normal skin and were coexpressed with the fibrogenic cytokine TGF-beta. These longitudinal studies in human patients with HSc suggest that fibrosis in the skin is associated with a polarized Th2 systemic response to injury that leads to increased T cells and their Th2 fibrogenic cytokines in tissues and the development of fibrosis and HSc.

Adult↗

PubMed2005

Conductivity and pH dual detection of growth profile of healthy and stressed Listeria monocytogenes.

In this study, growth of Listeria monocytogenes in a low conductivity growth medium (LCGM) was simultaneously monitored by conductivity and pH measurements. Detection times obtained from the conductivity and pH growth curves were inversely related to the initial concentration of L. monocytogenes in the medium. Linear responses were found by plotting detection times obtained from both conductivity and pH growth curves as a function of initial cell concentration in the range of 10(2) to 10(7) cfu/mL. The detection time was approximately 12 and 2 h for 10(2) and 10(7) cfu/mL of viable L. monocytogenes, respectively, using the conductivity growth curves, whereas it was approximately 1 h less using the pH growth curves. This dual detection system was used for evaluating the growth of acid-, temperature-, and salt-treated L. monocytogenes in the medium. Acid stress at pH 2 and 3 for 3 h caused approximately 12 and 4 h delay in the detection time on pH growth curves, while stress at pH 5 for 3 h did not cause a significant delay in detection time. Delay in detection times was also observed for L. monocytogenes cells exposed to 45 degrees C for more than 1 h (2 and 6 h). Exposure to 10% NaCl for 3 h did not cause visible delay in the detection time. These observations on detection times for stressed L. monocytogenes had a consistent trend with the cell number decrease determined by surface plating method.

Colony Count, Microbial↗

PubMed2005

Simultaneous detection of Escherichia coli O157:H7 and Salmonella Typhimurium using quantum dots as fluorescence labels.

In this study, we explored the use of semiconductor quantum dots (QDs) as fluorescence labels in immunoassays for simultaneous detection of two species of foodborne pathogenic bacteria, Escherichia coli O157:H7 and Salmonella Typhimurium. QDs with different sizes can be excited with a single wavelength of light, resulting in different emission peaks that can be measured simultaneously. Highly fluorescent semiconductor quantum dots with different emission wavelengths (525 nm and 705 nm) were conjugated to anti-E. coli O157 and anti-Salmonella antibodies, respectively. Target bacteria were separated from samples by using specific antibody coated magnetic beads. The bead-cell complexes reacted with QD-antibody conjugates to form bead-cell-QD complexes. Fluorescent microscopic images of QD labeled E. coli and Salmonella cells demonstrated that QD-antibody conjugates could evenly and completely attach to the surface of bacterial cells, indicating that the conjugated QD molecules still retain their effective fluorescence, while the conjugated antibody molecules remain active and are able to recognize their specific target bacteria in a complex mixture. The intensities of fluorescence emission peaks at 525 nm and 705 nm of the final complexes were measured for quantitative detection of E. coli O157:H7 and S. Typhimurium simultaneously. The fluorescence intensity (FI) as a function of cell number (N) was found for Salmonella and E. coli, respectively. The regression models can be expressed as: FI = 60.6 log N- 250.9 with R(2) = 0.97 for S. Typhimurium, and FI = 77.8 log N- 245.2 with R(2) = 0.91 for E. coli O157:H7 in the range of cell numbers from 10(4) to 10(7) cfu ml(-1). The detection limit of this method was 10(4) cfu ml(-1). The detection could be completed within 2 hours. The principle of this method could be extended to detect multiple species of bacteria (3-4 species) simultaneously, depending on the availability of each type of QD-antibody conjugates with a unique emission peak and the antibody coated magnetic beads specific to each species of bacteria.

Animals↗

PubMed2005

A nanoparticle amplification based quartz crystal microbalance DNA sensor for detection of Escherichia coli O157:H7.

A quartz crystal microbalance (QCM) DNA sensor, based on the nanoparticle amplification method, was developed for detection of Escherichia coli O157:H7. A thiolated single-stranded DNA (ssDNA) probe specific to E. coli O157:H7 eaeA gene was immobilized onto the QCM sensor surface through self-assembly. The hybridization was induced by exposing the ssDNA probe to the complementary target DNA, and resulted in the mass change and therefore frequency change of the QCM. Streptavidin conjugated Fe(3)O(4) nanoparticles (average diameter=145 nm) were used as "mass enhancers" to amplify the frequency change. Synthesized biotinylated oligonucleotides as well as E. coli O157:H7 eaeA gene fragments (151 bases) amplified using asymmetric PCR with biotin labeled primers were tested. As low as 10(-12)M synthesized oligonucleotides and 2.67 x 10(2) colony forming unit (CFU)/ml E. coli O157:H7 cells can be detected by the sensor. Linear correlation between frequency change and logarithmic number of bacterial cell concentration was found for E. coli O157:H7 from 2.67 x 10(2) to 2.67 x 10(6)CFU/ml.

Biosensing Techniques↗

PubMed2005

Detection of viable Salmonella using microelectrode-based capacitance measurement coupled with immunomagnetic separation.

In this study, we demonstrated the use of a general medium--brain heart infusion (BHI) broth that is not specifically formulated for impedance measurement, to achieve detectable impedance signals by using an interdigitated microelectrode (IME) with capacitance measurement at low frequencies. Anti-Salmonella antibody coated immunomagnetic beads were used to separate S. typhimurium from samples to provide the selectivity to this method. From analysis based on the equivalent circuit of the IME system, we found that the impedance change in BHI broth resulting from the growth of Salmonella was indeed the change in the double layer capacitance and could be monitored at 10 Hz using the IME. The results indicated that medium modification to improve impedance signal is not necessary with this IME system. However, effective immunological separation for the target organism is required for the selectivity when non-selective media are used. This finding provides a more flexible option of medium in impedance methods, which may provide opportunities to test those species of bacteria that have no suitable conductance growth medium. The detection time, t(d), was obtained from the impedance growth curve (impedance against bacterial growth time) at 10 Hz at the point where the impedance started to change. A linear relationship between the detection time and the logarithmic value of the initial cell number (N) was found in the Salmonella cell number ranging from 10(1) to 10(6) cfu/ml. The regression equation was t(d) = -1.22Log N + 8.90, with R2 = 0.95. The detection times for the initial cell number of 10(1) CFU/ml and 10(6) CFU/ml are 8 h and 1.5 h, respectively. This method is more sensitive than impedance methods using conventional electrodes.

Biosensing Techniques↗

PubMed2005

AFM and impedance spectroscopy characterization of the immobilization of antibodies on indium-tin oxide electrode through self-assembled monolayer of epoxysilane and their capture of Escherichia coli O157:H7.

The microscopic surface molecular structures and macroscopic electrochemical impedance properties of the epoxysilane monolayer and anti-Escherichia coli antibody layer on an indium-tin oxide (ITO) electrode surface were studied in this paper. Characterization of stepwise changes in microscopic features of the surfaces and electrochemical properties upon the formation of each layer were carried out using both atomic force microscopy (AFM) and electrochemical impedance spectroscopy in the presence of [Fe(CN)6](3-/4-) as a redox couple. AFM images of the self-assembled monolayer (SAM) evidenced the dense, complete, and homogeneous morphology of the epoxysilane monolayer on the ITO surface. The uniformity of the epoxysilane SAM allowed antibodies to attach to the epoxy surface groups of the silanes in a similarly uniform fashion. The effects of epoxysilane monolayer and the antibody layer on the electrochemical properties of the electrode were quantitatively analyzed in terms of double layer capacitance, electron transfer resistance, Warburg impedance and solution resistance using Randles model as the equivalent circuit. It was demonstrated that the epoxysilane monolayer and the antibody layer act as barriers for the electron transfer between the electrode surface and the redox species in the solution, resulting in most significant increases in the electron transfer resistance compared to all the electric elements. Immunoreaction with E. coli O157:H7 cells demonstrated specific recognition of the immobilized anti-E. coli antibodies as evidenced by AFM imaging and impedance spectroscopy. It was found that the binding of E. coli cells mainly affected the electron transfer resistance and Warburg impedance.

Antibodies↗

PubMed2005

Quantum dots as fluorescent labels for quantitative detection of Salmonella typhimurium in chicken carcass wash water.

Fluorescent semiconductor quantum dots have recently emerged as a novel and promising class of fluorescent labels for biological detection. In this study, quantum dots were used as fluorescent labels in immunoassays for quantitative detection of foodborne pathogenic bacteria. Salmonella Typhimurium cells were separated from chicken carcass wash water using anti-Salmonella antibody coated magnetic beads and reacted to secondary biotin-labeled anti-Salmonella antibody. Quantum dots coated with streptavidin were added to react with biotin on the secondary antibody. Measurement of the intensity of fluorescence produced by quantum dots provided a quantitative method for microbial detection. A linear relationship between Salmonella Typhimurium cell number (log N) in the samples of chicken carcass wash water and the fluorescence intensity (FI) was found for the cell numbers ranging from 10(3) to 10(7) CFU/ml. The regression model can be expressed as FI = 198.6 Log N - 639.03 with R2 = 0.96. The detection limit of this method was 10(3) CFU/ml.

Animals↗

PubMed2005

Magnetic nanoparticle-antibody conjugates for the separation of Escherichia coli O157:H7 in ground beef.

The immunomagnetic separation with magnetic nanoparticle-antibody conjugates (MNCs) was investigated and evaluated for the detection of Escherichia coli O157:H7 in ground beef samples. MNCs were prepared by immobilizing biotin-labeled polyclonal goat anti-E. coli antibodies onto streptavidin-coated magnetic nanoparticles. For bacterial separation, MNCs were mixed with inoculated ground beef samples, then nanoparticle-antibody-E. coli O157:H7 complexes were separated from food matrix with a magnet, washed, and surface plated for microbial enumeration. The capture efficiency was determined by plating cells bound to nanoparticles and unbound cells in the supernatant onto sorbitol MacConkey agar. Key parameters, including the amount of nanoparticles and immunoreaction time, were optimized with different concentrations of E. coli O157:H7 in phosphate-buffered saline. MNCs presented a minimum capture efficiency of 94% for E. coli O157:H7 ranging from 1.6 x 10(1) to 7.2 x 10(7) CFU/ml with an immunoreaction time of 15 min without any enrichment. Capture of E. coli O157:H7 by MNCs did not interfere with other bacteria, including Salmonella enteritidis, Citrobacter freundii, and Listeria monocytogenes. The capture efficiency values of MNCs increased from 69 to 94.5% as E. coli O157:H7 decreased from 3.4 x 10(7) to 8.0 x 10(0) CFU/ml in the ground beef samples prepared with minimal steps (without filtration and centrifugation). An enrichment of 6 h was done for 8.0 x 10(0) and 8.0 x 10(1) CFU/ml of E. coli O157:H7 in ground beef to increase the number of cells in the sample to a detectable level. The results also indicated that capture efficiencies of MNCs for E. coli O157:H7 with and without mechanical mixing during immunoreaction were not significantly different (P > 0.05). Compared with microbeads based immunomagnetic separation, the magnetic nanoparticles showed their advantages in terms of higher capture efficiency, no need for mechanical mixing, and minimal sample preparation.

Animals↗

PubMed2004

Interdigitated microelectrode (IME) impedance sensor for the detection of viable Salmonella typhimurium.

Interdigitated microelectrodes (IMEs) were used as impedance sensors for rapid detection of viable Salmonella typhimurium in a selective medium and milk samples. The impedance growth curves, impedance against bacterial growth time, were recorded at four frequencies (10Hz, 100Hz, 1kHz, and 10kHz) during the growth of S. typhimurium. The impedance did not change until the cell number reached 10(5)-10(6) CFUml(-1). The greatest change in impedance was observed at 10Hz. To better understand the mechanism of the IME impedance sensor, an equivalent electrical circuit, consisting of double layer capacitors, a dielectric capacitor, and a medium resistor, was introduced and used for interpreting the change in impedance during bacterial growth. Bacterial attachment to the electrode surface was observed with scanning electron microscopy, and it had effect on the impedance measurement. The detection time, t(D), defined as the time for the impedance to start change, was obtained from the impedance growth curve at 10Hz and had a linear relationship with the logarithmic value of the initial cell number of S. typhimurium in the medium and milk samples. The regression equations for the cell numbers between 4.8 and 5.4 x 10(5) CFUml(-1) were t(D) = -1.38 log N + 10.18 with R(2) = 0.99 in the pure medium and t(D) = -1.54 log N + 11.33 with R(2) = 0.98 in milk samples, respectively. The detection times for 4.8 and 5.4 x 10(5) CFUml(-1) initial cell numbers were 9.3 and 2.2 h, respectively, and the detection limit could be as low as 1 cell in a sample.

Animals↗

PubMed2004

Interdigitated Array microelectrode-based electrochemical impedance immunosensor for detection of Escherichia coli O157:H7.

A label-free electrochemical impedance immunosensor for rapid detection of Escherichia coli O157:H7 was developed by immobilizing anti-E. coli antibodies onto an indium-tin oxide interdigitated array (IDA) microelectrode. Based on the general electronic equivalent model of an electrochemical cell and the behavior of the IDA microelectrode, an equivalent circuit, consisting of an ohmic resistor of the electrolyte between two electrodes and a double layer capacitor, an electron-transfer resistor, and a Warburg impedance around each electrode, was introduced for interpretation of the impedance components of the IDA microelectrode system. The results showed that the immobilization of antibodies and the binding of E. coli cells to the IDA microelectrode surface increased the electron-transfer resistance, which was directly measured with electrochemical impedance spectroscopy in the presence of [Fe(CN)(6)](3-/4-) as a redox probe. The electron-transfer resistance was correlated with the concentration of E. coli cells in a range from 4.36 x 10(5) to 4.36 x 10(8) cfu/mL with the detection limit of 10(6) cfu/mL.

Antibodies, Bacterial↗

PubMed2003

Detection of viable Salmonella typhimurium by impedance measurement of electrode capacitance and medium resistance.

Three-electrode electrochemical impedance technique was investigated for detection of Salmonella typhimurium by monitoring the growth of bacteria in selenite cystine (SC) broth supplemented with trimethylamine oxide hydrochloride (TMAO.HCl) and mannitol (M). The change in the system impedance during the growth of bacteria was studied using frequency spectral scanning. It was found that the impedance at low frequencies (<10 kHz) mainly came from the double-charged layer capacitance, reflecting the changes at the electrode interface and the adsorption on the electrode surface. While at high frequencies (>10 kHz), the system impedance mainly depended on the medium resistance. The adsorption of bacteria on the electrode surface was detected by measuring low frequency impedance, and verified with Faradic impedance spectroscopy. Enumeration of S. typhimurium using a low frequency (1 Hz) capacitance measurement and a high frequency (1 MHz) resistance measurement were compared. The detection times were determined for quantitative analysis based on the growth curves of bacteria referring to either the medium resistance or electrode capacitance. The regression equations for the detection times (t(d), h) and the initial cell number (N, cells.ml(-1)) were t(d)=-1.24logN+13.4 with R(2)=0.98 and t(d)=-1.40logN+14.46 with R(2)=0.97 for the medium resistance and electrode capacitance methods, respectively.

Cell Count↗

PubMed2002

Immunobiosensor chips for detection of Escherichia coil O157:H7 using electrochemical impedance spectroscopy.

Impedance biosensor chips were developed for detection of Escherichia coli O157:H7 based on the surface immobilization of affinity-purified antibodies onto indium tin oxide (ITO) electrode chips. The immobilization of antibodies onto ITO chips was carried out using an epoxysilane monolayer to serve as a template for chemical anchoring of antibodies. The surface characteristics of chips before and after the binding reaction between the antibodies and antigens were characterized by atomic force microscopy (AFM). The patterns of the epoxysilanes monolayer, antibodies, and E. coli cells were clearly observed from the AFM images. Alkaline phosphatase as the labeled enzyme to anti-E. coli O157:H7 antibody was used to amplify the binding reaction of antibody-antigen on the chips. The biocatalyzed precipitation of 5-bromo-4-chloro-3-indolyl phosphate by alkaline phosphatase on the chips in pH 10 PBS buffer containing 0.1 M MgCl2 increased the electron-transfer resistance for a redox probe of Fe(CN)6(3-/4-) at the electrode-solution interface or the electrode resistance itself. Electrochemical impedance spectroscopy and cyclic voltammetric method were employed to follow the stepwise assembly of the systems and the electronic transduction for the detection of E. coli. The biosensor could detect the target bacteria with a detection limit of 6 x 10(3) cells/mL. A linear response in the electron-transfer resistance for the concentration of E. coli cells was found between 6 x 10(4) and 6 x 10(7) cells/mL.

Biosensing Techniques↗

PubMed2002

Peripheral blood fibrocytes from burn patients: identification and quantification of fibrocytes in adherent cells cultured from peripheral blood mononuclear cells.

Peripheral blood fibrocytes are a newly identified leukocyte subpopulation that displays fibroblast-like properties. These blood-borne cells can rapidly enter the site of injury at the same time as circulating inflammatory cells. We hypothesize that circulating fibrocytes represent an important source of fibroblasts for healing of extensive burn wounds where it may be difficult for fibroblasts to migrate from the edges of uninjured tissue. In this study we identified and quantified fibrocytes among the adherent cells cultured from human peripheral blood mononuclear cells (PBMC) obtained from 18 burn patients and 12 normal individuals, based on their ability to express type I collagen. Our results showed that adherent cells cultured from PBMC of burn patients differentiated to fibrocytes more efficiently than did those from normal individuals. The percentage of type I collagen-positive fibrocytes was significantly higher for patients than for controls (89.7 +/- 7.9% versus 69.9 +/- 14.7%, p < 0.001). This percentage was consistently higher for patients with a >/=30% total body surface area burn until 1 year, with the highest percentage appearing within 3 weeks of injury. A positive correlation was found between the levels of serum transforming growth factor-beta1 (TGF-beta1) and the percentage of fibrocytes developing in the cultures of PBMC derived from these patients. We also demonstrated that fibrocytes were derived from CD14(+) cells but not CD14(-) cells. Conditioned medium from CD14(-) cells was, however, required for fibrocyte differentiation, whereas direct contact between CD14(-) and CD14(+) cells was not necessary. Treatment of the cell cultures with TGF-beta1 enhanced the development of collagen-positive cells, whereas the inclusion of neutralizing anti-TGF-beta1 antibodies in the CD14(-) conditioned medium suppressed fibrocyte differentiation. These data suggest that the development of fibrocytes is up-regulated systemically in burn patients. Increased TGF-beta in serum stimulates the differentiation of the CD14(+) cell population in PBMC into collagen-producing cells that may be important in wound healing and scarring.

Adolescent↗

PubMedDate not supplied

Burn injury induces an inhibitory signal in the lung Smad pathway.

Smad signaling mediates the cellular response to transforming growth factor-beta (TGF-beta). We hypothesize that variations in Smad signaling modify the response to TGF-beta signaling in the lung after injury. C57BLKS/J mice were subjected to an 18% surface area burn injury, sacrificed at specific time points and their lung tissue was harvested. Lung TGF-beta1 expression, as determined by RT-PCR, ELISA and PAI/Luciferase assay, was not affected by injury. Western blots for Smad2/3 and Smad4 on nuclear fractions revealed decreased Smad2, Smad3, and Smad4 protein levels at 3h, while their total cellular levels did not differ from control mice. Smad7 protein increased transiently at 3 h. Correlating with Smad inhibition, transcription in type I alpha-2 collagen was also transiently depressed. By RT-PCR, Smad3 and Smad7 mRNAs decreased at 3 h, while Smad2 and Smad4 mRNA levels remained constitutive. Burn injury did not alter lung TGF-beta1 expression but caused Smad inhibition through decreased nuclear translocation of Smad2, Smad3, and Smad4, and upregulated Smad7. Transcription was not the key regulatory step in Smad protein expression, as transient decreases in Smad3 and Smad7 mRNA did not correlate with protein levels. It appears that Smad activity may in part attenuate TGF-beta activity after burn injury.

Animals↗

PubMedDate not supplied

Development, characterization, and wound healing of the keratin 14 promoted transforming growth factor-beta1 transgenic mouse.

Transforming growth factor-beta1 is a fibrogenic cytokine that is important in the development of fibroproliferative disorders of the skin after injury. To investigate the role of transforming growth factor-beta1 produced by keratinocytes during wound healing, a plasmid with the human transforming growth factor-beta1 gene coupled with the keratin 14 promoter (pG3Z: K14-TGF-beta1) was constructed. The construct was tested successfully in vitro before being used to generate transgenic animals, which were subsequently bred into homozygous and heterozygous lines. Genotype screening of founders and progeny was performed by Southern blotting and targeting of the transgene to the epidermis by the keratin 14 promoter was shown by reverse transcription polymerase chain reaction. The major phenotypic change observed in the transgenic animals was "scruffiness" of the fur attributed to transgene expression in the skin, seen primarily in the homozygous line. A significant reduction in the rate of reepithelialization of full-thickness excisional wounds of dorsal skin was seen in homozygous animals compared with normal litter-mate controls at day 7 (p < 0.05, Fisher's Exact test) and day 9 (p < 0.01) postwounding. Wounds in heterozygous animals also healed more slowly at day 9 (p < 0.01). Northern analysis of mRNA extracted from the wounds showed increased human transforming growth factor-beta1 message levels in homozygous and heterozygous animals, maximal at day 5. Significant increases in transforming growth factor-beta1 activity in healing wounds measured using the plasminogen activator inhibitor-1/luciferase assay were found in the transgenic strains at day 9 postinjury as compared with the normal litter-mate control mice (p < 0.001, ANOVA). Type I procollagen mRNA expression was higher in the homozygous and heterozygous animals, with the highest levels reached at day 9. By day 5 postwounding, biopsies of both homozygous and heterozygous tissues were significantly higher in collagen as compared with wounds in control animals (p < 0.05, ANOVA). Based on these data, the K14-TGF-beta1 transgenic mouse shows that excessive latent transforming growth factor-beta1 produced in the epidermal layer of the skin delays reepithelialization in excisional wounds but subsequently the cells of the epidermis stimulate dermal fibroblasts leading to fibrosis through a paracrine mechanism.

Animals↗