Search PubMed⌕ Search

Biomedical subjects

Lawrence B Alemany

Publications and source records attributed to Lawrence B Alemany.

10 recordsLinked to original sources
PubMed2006

Surface-rolling molecules.

Design, syntheses, and testing of new, fullerene-wheeled single molecular nanomachines, namely, nanocars and nanotrucks, are presented. These nanovehicles are composed of three basic components that include spherical fullerene wheels, freely rotating alkynyl axles, and a molecular chassis. The use of spherical wheels based on C60 and freely rotating axles based on alkynes permits directed nanoscale rolling of the molecular structure on gold surfaces. The rolling motion observed by STM resembles the same motion performed by macroscopic entities in which rolling occurs perpendicular to the axles. A new synthesis methodology, in situ ethynylation of fullerenes, was developed for the realization of the fullerene-wheeled molecular machines. Four generations of the fullerene-wheeled structures were developed, and the latest fourth generation nanocar, 3b, along with three-wheeled triangular compounds, 4a and 4b, provided definitive evidence for fullerene-based wheel-like rolling motion, not stick-slip or sliding translation. The studies here underscore the ability to control directionality of motion in molecular-sized nanostructures through precise molecular design and synthesis.

Journal Article↗
PubMed2006

Detailed analysis of coupling constants and isotope effects in NMR spectra of isotopomers of (12)C(68) (13)C(2).

A preliminary study of the long-range (i.e. two-bond or longer) (13)C--(13)C coupling constants in natural abundance C(70) shows, consistent with recent theoretical calculations by Peralta et al. that the largest long-range J(CC) values for the polar and equatorial sites are clearly smaller than the largest long-range J(CC) values for the other three sites. The unusually large size of the (2)J(CC) couplings between inequivalent carbons in a nonpolar pentagon in C(70) has no analog among (2)J(CC) data reported for planar aromatic compounds. No long-range J(CC) values appear to have been reported for any curved aromatic compounds. In addition, much more precise (1)J(CC) values were obtained for C(70) than was possible about 15 years ago. Comparing the chemical shifts for each of the five isotopomers of C(70) containing only one (13)C nucleus and the frequencies of the satellites for each of the four isotopomers containing two adjacent and inequivalent (13)C nuclei indicates that replacing (12)C with (13)C shields the adjacent (13)C nucleus by 15 to 23 ppb, consistent with the limited (1)Delta(13)C((13/12)C) isotope effect data available on a few small aromatic molecules. Such measurements become possible with natural abundance C(70) only by using a (13)C cryoprobe and a high-field spectrometer (700 MHz). The additional information that could be obtained from a spectrum obtained under ultrahigh resolution conditions is discussed. Secure identification of the singlets arising from the four (12)C(68) (13)C(2) isotopomers with equivalent adjacent (13)C nuclei is necessary to allow the largest long-range J(CC) values to be precisely determined. The presence of numerous isotopomers containing two or more (13)C nuclei would present a great challenge in interpreting the various signals in a spectrum obtained under ultrahigh resolution conditions.

Journal Article↗
PubMed2005

Structure analyses of dodecylated single-walled carbon nanotubes.

Alkylation of nanotube salts prepared using either lithium, sodium, or potassium in liquid ammonia yields sidewall-functionalized nanotubes that are soluble in organic solvents. Atomic force microscopy and transmission electron microscopy studies of dodecylated SWNTs prepared from HiPco nanotubes and 1-iodododecane show that extensive debundling results from intercalation of the alkali metal into the SWNT ropes. TGA-FTIR analyses of samples prepared from the different metals revealed radically different thermal behavior during detachment of the dodecyl groups. The SWNTs prepared using lithium can be converted into the pristine SWNTs at 180-330 degrees C, whereas the dodecylated SWNTs prepared using sodium require a much higher temperature (380-530 degrees C) for dealkylation. SWNTs prepared using potassium behave differently, leading to detachment of the alkyl groups over the temperature range 180-500 degrees C. These differences can be observed by analysis of the solid-state 13C NMR spectra of the dodecylated SWNTs that have been prepared using the different alkali metals and may indicate differences in the relative amounts of 1,2- and 1,4-addition of the alkyl groups.

Alkylation↗
PubMed2005

Diels-Alder addition to fluorinated single walled carbon nanotubes.

Fluorinated single walled carbon nanotubes (SWNTs) undergo a facile Diels-Alder [4 + 2] cycloaddition with a range of dienes resulting in a C ratio substituent ratio between 20 ratio 1 to 32 ratio 1; IR, Raman, AFM and (13)C NMR characterization are consistent with sidewall functionalization.

Journal Article↗
PubMed2005

Synthesis, spectroscopic and nonlinear optical properties of multiple [60]fullerene-oligo(p-phenylene ethynylene) hybrids.

A series of multiple [60]fullerene terminated oligo(p-phenylene ethynylene) (OPE) hybrid compounds has been synthesized through a newly developed in situ ethynylation method. Structural and magnetic shielding properties of the highly unsaturated carbon-rich C(60) and OPE scaffolds were characterized by 1D and 2D NMR spectroscopic analyses. Electronic interactions between the [60]fullerenes and the OPE backbones were investigated by UV/Vis spectroscopic and cyclic voltammetry (CV) experiments. Our studies clearly show that although the multiple [60]fullerene groups are connected via pi-conjugated OPE frameworks, they present diminutive electronic interactions in the ground state, and the electronic behavior of the [60]fullerene cages are only affected by the OPE backbones through modest inductive effects. Interestingly, sizable third-order nonlinear optical (NLO) responses (gamma) and enhanced two-photon absorption (TPA) cross-sections (sigma((2))) were determined for the multifullerene-OPE hybrid 31 relative to its OPE precursor from differential optical Kerr effect (DOKE) experiments. Such enhanced NLO performance is presumably due to the occurrence of periconjugation and/or charge transfer effects in the excited state. In addition, comparatively strong excited-state absorption was observed and characterized for OPE pentamer 12. Thus, the use of such fullerene-derivatized conjugated oligomers aids the quest for molecules with large third-order NLO and TPA properties.

Fullerenes↗
PubMed2004

Reversible dimerization of [5,6]-C60O.

The recently discovered [5,6]-open isomer of C(60)O has been found to undergo facile dimerization to form a new C(2) symmetry isomer of C(120)O(2), which can be photodissociated with relatively high efficiency to regenerate monomeric [5,6]-C(60)O. High yield dimerization of [5,6]-C(60)O proceeds spontaneously in toluene solution near room temperature. On the basis of (13)C NMR spectroscopy, ab initio quantum computations, and HPLC retention patterns, the resulting C(120)O(2) product has been deduced to be a nonpolar dimer of C(2) symmetry in which the C(60)O moieties are linked by two single bonds between sp(3)-hybridized carbon atoms adjacent to oxygen atoms. Photophysical properties of this dimer have also been measured and compared to those of C(120), the [2 + 2]-dimer of C(60). The ground-state absorption spectrum of C(120)O(2) in toluene is slightly red-shifted relative to that of C(120), with a distinctive peak at 329 nm and an S(1)-S(0) origin band at 704 nm. Its fluorescence spectrum shows two major peaks at 718 and 793 nm. In room-temperature toluene, the measured triplet state intrinsic lifetime of this C(120)O(2) isomer is 34 +/- 2 micros, a value somewhat shorter than that of C(120) (44 micros). C(120)O(2) undergoes photodissociation from its triplet state to regenerate monomeric [5,6]-C(60)O with quantum yields of 2.5% at 24 degrees C and 43% at 70 degrees C. It can therefore serve as a stable reactant for photolytic production of [5,6]-C(60)O. As a simple fullerene adduct that reacts under mild conditions, [5,6]-C(60)O may prove useful in special synthetic applications. Solutions of [5,6]-C(60)O are also unique because they can provide mixtures of a fullerene monomer and its dimer in a dynamic balance controllable by adjustment of concentration, temperature, and optical irradiation.

Journal Article↗
PubMed2003

Sidewall carboxylic acid functionalization of single-walled carbon nanotubes.

The reactions of single-walled carbon nanotubes (SWNTs) with succinic or glutaric acid acyl peroxides in o-dichlorobenzene at 80-90 degrees C resulted in the addition of 2-carboxyethyl or 3-carboxypropyl groups, respectively, to the sidewalls of the SWNT. These acid-functionalized SWNTs were converted to acid chlorides by derivatization with SOCl(2) and then to amides with terminal diamines such as ethylenediamine, 4,4'-methylenebis(cyclohexylamine), and diethyltoluenediamine. The acid-functionalized SWNTs and the amide derivatives were characterized by a set of materials characterization methods including attenuated total reflectance (ATR) FTIR, Raman and solid state (13)C NMR spectroscopy, transmission electron microscopy (TEM), and thermal gravimetry-mass spectrometry (TG-MS). The degree of SWNT sidewall functionalization with the acid-terminated groups was estimated as 1 in 24 carbons on the basis of TG-MS data. In comparison with the pristine SWNTs, the acid-functionalized SWNTs show an improved solubility in polar solvents, for example, alcohols and water, which enables their processing for incorporation into polymer composite structures as well as for a variety of biomedical applications.

Journal Article↗
PubMed2002

Thermal rearrangements of spiro[2.4]hepta-1,4,6-trienes.

Thermolysis of spiro[2.4]hepta-1,4,6-triene (1a) at 50 degrees C yielded bicyclo[3.2.0]hepta-1,3,6-triene (5), which dimerized in two different fashions to form cyclobutanes. The 1,2-dimethyl and 1-propyl derivatives of 1a also rearranged at 50 degrees C, but at a faster rate, each yielding a pair of cyclobutane dimers. The structures of these symmetrical dimers were investigated by 1D and 2D NMR and NOE difference spectroscopy. Ab initio calculations indicated that the two strained olefins 1a and 5 had comparable energies about 50 kcal/mol lower than norborna-1(7),2,5-triene, which was thus excluded as a reaction intermediate.

Journal Article↗
PubMed2002

Using simple 13C NMR linewidth and relaxation measurements to make detailed chemical shift assignments in triacylglycerols and related compounds.

Two simple experiments measuring the 13C linewidths nu(1/2) and spin-lattice relaxation times T(1) of each of the signals in the spectrum of trilinolein indicate that the nu(1/2) and T(1) values are consistent with the different degrees of motional freedom expected for the various 13C nuclei. However, for each chain, the nu(1/2) and T(1) measurements indicate a small reversal in mobility at C-10 relative to C-9 before motional freedom again steadily increases on each chain starting at C-11. The T(1) experiment allows unambiguous assignments of the C-8 signal and C-14 signal, which differ by only 0.010 ppm. Measurements of 13C nu(1/2) and T(1) values on tripalmitin provide secure assignments for the C-5 and C-6 signals, for which conflicting assignments have been reported. The T(1) measurements also show that among the tightly clustered C-8 through C-12 signals, the C-11 signals are the most downfield, while the C-12 signals are the most upfield, again contrary to a previous report. Similar measurements of 13C nu(1/2) and T(1) values on other triacylglycerols or related compounds may prove equally useful in making chemical shift assignments and detecting any discontinuities in motional freedom along a chain. The benefits and possible limitations of ultrahigh field NMR for studying triacylglycerols and related compounds are discussed.

Carbon Isotopes↗