Search PubMed⌕ Search

Biomedical subjects

L S Skaggs

Publications and source records attributed to L S Skaggs.

12 recordsLinked to original sources
PubMed1980

Comparison of the microdosimetric event-size method and the twin-chamber method of separating dose into neutron and gamma components.

Microdosimetric measurements of event-size spectra, made with a proportional counter, are being used increasingly for separation of dose components in mixed n-gamma fields. Measurements in fields produced by 8.3 MeV deuteron bombardment of thick beryllium and deuterium targets were made in air and at 6 and 12 cm depth in water with a spherical tissue-equivalent (TE) proportional counter and with a pair of calibrated ion chambers (TE-TE and Mg-Ar). The dose results obtained with the two methods agree well for the neutron components, but the gamma components do not demonstrate consistent agreement. An important source of error in the microdosimetric method is the matching of the spectra measured at different gain settings to cover the large range of event sizes. The effect of this and other sources of error is analysed.

Gamma Rays↗
PubMed1979

Energy dependence of the neutron sensitivity of C--CO2, Mg--Ar and TE--TE ionisation chambers.

The neutron sensitivity relative to 60Co of commercially available C--CO2, Mg--Ar and TE--TE ionisation chambers was measured as a function of energy from 1 to 44 MeV. The sensitivity function was obtained by the method of Kuchnir, Vyborny and Skaggs from differences in measurements made at two angles in mixed fields having an isotropic gamma-ray component. Such fields were produced by bombardment of a thick beryllium target with 16 and 28 MeV deuterons, 44 MeV 3He-ions and 35 and 46 MeV protons. The results show that the relative neutron sensitivity of the C--CO2 and Mg--Ar chambers increases continuously with energy, whereas that of the TE--TE chamber is relatively constant.

Argon↗
PubMed1978

Dosimetric properties of neutron beams from the D--D reaction in the energy range from 6.8 to 11.1 MeV.

The tissue kerma in air, the tissue dose at maximum build-up, the relative depth dose on the central axis and the dose build-up characteristics were measured for neutrons produced by 6.8, 8.9 and 11.1 MeV deuterons on deuterium. The neutron beams were produced by a variable-energy cyclotron with a fully stopping deuterium gas target 20 cm long. Measurements were made in a 11.1cm x 11.1 cm field 126 cm from the target entrance window. The dose rate was found to increase rapidly with energy from 0.07 rad min-1 microamperemeter-1 at 6.8MeV to 0.35 rad min-1 muA-1 at 11.1 MeV. The entrance dose is about 50% of the dose maximum for each bombarding energy. The depth of the 95% dose level in the build-up region increased from 50 mg cm-2 at 6.8 MeV to 90 mg cm-2 at 11.1 MeV. The penetration was independent of the bombarding energy in the region investigated. Attenuation of the total dose to 50% of the maximum occurred at 10.2 +/- 0.1 g cm-2 for all three bombarding energies. The dose at the maximum is typically 14% higher than the tissue kerma in air.

Atmosphere↗
PubMed1978

The use of 10B to enhance the tumour dose in fast-neutron therapy.

Incorporation of 10B in tumours treated by fast-neutron therapy would increase the tumour dose via the reaction 10B(n, alpha)7Li which occurs with partially thermalised neutrons. The extent of the dose enhancement was measured for neutron beams with median energies of 2.4, 3.3, 7.0 and 9.0 MeV by two techniques: with a BF3 proportional counter in three beams and activation of 23Na in the fourth. The results obtained with the two techniques are in good agreement. The magnitude of the dose enhancement depends upon the depth, field size and neutron beam energy. The dose enhancement at a depth of 8 cm varied from 0.32% with the lowest-energy beam to 0.07% with the highest-energy beam for each microgram of 10B uptake per gram of tissue. The products of the reaction in 10B would, however, have an RBE about twice that of the fast-neutron dose in the absence of boron. The method may be useful if drugs providing adequate uptake of 10B can be synthesised.

Beryllium↗
PubMed1977

Comparison of two independent methods for determining the neutron/gamma sensitivity of a dosemeter.

Results obtained with two independent methods for measuring the n/gamma sensitivity of non-hydrogenous dosemeters are compared for the neutron beam produced by 8.3 MeV deuterons on beryllium. In one method, a pure neutron field is simulated by taking the difference between measurements made at diffrent angles in a mixed field with an isotropic gamma-ray component. In the second method, the mixed (n+gamma) beam is purified by lead filtration. An assumption in the lead filtration method is that the background radiation is invariant under three different beam conditions. This assumption was found not be be valid in our experimental arrangement; and caused the values obtained for the n/gamma sensitivity to be systematically high. A modification was made in the lead filtration method so that the dosemeter response to background could be determined for each beam condition. Good agreement was obtained between the results of the spectral difference and modified lead filtration methods.

Air↗
PubMed1975

A new method for determining the neutron response function of "neutron insensitive" dosimeters. Method and preliminary determinations.

Charged-particle bombardment of thick beryllium targets produces a neutron yield varying with angle, and an isotropic gamma component. Differences in detector response in such a field are due to neutrons alone. With accurate neutron spectral distributions and measurements of detector response, a computer code can be used to determine the neutron sensitivity of the detector as a function of energy.

Computers↗
PubMedDate not supplied

Neutron spectra.

Explore the source record for details and available documents.

Neutrons↗
PubMedDate not supplied

Neutron spectra from 35 and 46 MeV protons, 16 and 28 MeV deuterons, and 44 MeV 3He ions on thick beryllium.

The energy spectra of neutrons produced by 35 and 46 MeV protons, 16 and 28 MeV deuterons, and 44 MeV 3He ions on thick beryllium were measured at angles of 0 degrees, 15 degrees, and 45 degrees with respect to the incident beams. The spectra were measured by the time-of-flight method for neutrons from the maximum energy down to 1 MeV. Neutron dose rates obtained from the zero-degree spectra by use of available tissue kerma factors agree with TE-TE ionization chamber measurements.

Beryllium↗
PubMedDate not supplied

Dosimetric considerations of d(15) + Be and p(26) + Be neutron beams from an isocentric cyclotron facility.

To select the optimum therapeutic neutron beam available from a CS30 medical cyclotron (manufactured by the Cyclotron Corporation, Berkeley, California), central axis depth dose data and output dose rates were compared for the bombardment of beryllium with either the proton or deuteron beams available from the machine. The effect on these parameters of filtering the beams with either pure polyethylene, polyethylene loaded with 5% boron, or polyethylene loaded with 10% lithium was studied. A 4-cm, 10% lithiated filter used with a 26-MeV proton beam was selected for therapeutic use. Buildup curves, beam profiles at several transverse planes for different field sizes, and comparison of beam profiles with 60Co are given.

Beryllium↗