Search PubMed⌕ Search

Biomedical subjects

L Mahadevan

Publications and source records attributed to L Mahadevan.

At least 19 recordsLinked to original sources
PubMed2007

Nonlinear mechanics of soft fibrous networks.

Mechanical networks of fibres arise on a range of scales in nature and technology, from the cytoskeleton of a cell to blood clots, from textiles and felts to skin and collageneous tissues. Their collective response is dependent on the individual response of the constituent filaments as well as density, topology and order in the network. Here, we use the example of a low-density synthetic felt of athermal filaments to study the generic features of the mechanical response of such networks including strain stiffening and large effective Poisson ratios. A simple microscopic model allows us to explain these features of our observations, and provides us with a baseline framework to understand active biomechanical networks.

Biocompatible Materials↗
PubMed2006

Dynamics of fracture in drying suspensions.

We investigate the dynamics of fracture in drying films of colloidal silica. Water loss quenches the nanoparticle dispersions to form a liquid-saturated elastic network of particles that relieves drying-induced strain by cracking. These cracks display intriguing intermittent motion originating from the deformation of arrested crack tips and aging of the elastic network. The dynamics of a single crack exhibits a universal evolution, described by a balance of the driving elastic power with the sum of interfacial power and the viscous dissipation rate of flowing interstitial fluid.

Journal Article↗
PubMed2006

Microtubules can bear enhanced compressive loads in living cells because of lateral reinforcement.

Cytoskeletal microtubules have been proposed to influence cell shape and mechanics based on their ability to resist large-scale compressive forces exerted by the surrounding contractile cytoskeleton. Consistent with this, cytoplasmic microtubules are often highly curved and appear buckled because of compressive loads. However, the results of in vitro studies suggest that microtubules should buckle at much larger length scales, withstanding only exceedingly small compressive forces. This discrepancy calls into question the structural role of microtubules, and highlights our lack of quantitative knowledge of the magnitude of the forces they experience and can withstand in living cells. We show that intracellular microtubules do bear large-scale compressive loads from a variety of physiological forces, but their buckling wavelength is reduced significantly because of mechanical coupling to the surrounding elastic cytoskeleton. We quantitatively explain this behavior, and show that this coupling dramatically increases the compressive forces that microtubules can sustain, suggesting they can make a more significant structural contribution to the mechanical behavior of the cell than previously thought possible.

Actomyosin↗
PubMed2006

Dynamics of surfactant-driven fracture of particle rafts.

We investigate the dynamic fracture of a close-packed monolayer of particles, or particle raft, floating at a liquid-gas interface induced by the localized addition of surfactant. Unusually for a two-dimensional solid, our experiments show that the speed of crack propagation here is not affected by the elastic properties of the raft. Instead it is controlled by the rate at which surfactant is advected to the crack tip by means of the induced Marangoni flows. Further, the velocity of propagation is not constant in time and the length of the crack scales as t(3/4). More broadly, this surfactant-induced rupture of interfacial rafts suggests ways to manipulate them for applications.

Air↗
PubMed2006

Superficial wrinkles in stretched, drying gelatin films.

When a thin film of initially hydrated gelatin is allowed to dry from the surface, superficial changes in the structure of the material affect the local mechanical properties of the drying region. If the film is simultaneously subjected to large strain deformation (above 20%), a periodic pattern of wrinkles appears on the surface of the gelatin along the length of the sample in the direction of the applied force. These wrinkles are uniformly distributed on the surface of the gelatin with a wavelength that is much smaller than the sample thickness, which changes with sample composition, aging time, and deformation rate. We investigate these patterns via in situ environmental scanning electron microscopy (ESEM) and provide a theory for their origin.

Chemistry, Physical↗
PubMed2006

Modeling DNA loops using the theory of elasticity.

An elastic rod model of a protein-bound DNA loop is adapted for application in multi-scale simulations of protein-DNA complexes. The classical Kirchhoff system of equations which describes the equilibrium structure of the elastic loop is modified to account for the intrinsic twist and curvature, anisotropic bending properties, and electrostatic charge of DNA. The effects of bending anisotropy and electrostatics are studied for the DNA loop clamped by the lac repressor protein. For two possible lengths of the loop, several topologically different conformations are predicted and extensively analyzed over the broad range of model parameters describing DNA bending and electrostatic properties. The scope and applications of the model in already accomplished and in future multi-scale studies of protein-DNA complexes are discussed.

Computer Simulation↗
PubMed2006

A simple microscopic model for the dynamics of adhesive failure.

We consider a microscopic model for the failure of soft adhesives in tension based on ideas of bond rupture under dynamic loading. By focusing on adhesive failure under loading at constant velocity, we demonstrate that bimodal curves of stress against strain may occur due to effects of finite polymer chain or bond length and characterize the loading conditions under which such bimodal behavior is observed. The results of this analysis are in qualitative agreement with experiments performed on unconfined adhesives in which failure does not occur by cavitation.

Journal Article↗
PubMed2005

Colloid science: non-spherical bubbles.

Surface tension gives gas bubbles their perfect spherical shape by minimizing the surface area for a given volume. Here we show that gas bubbles and liquid drops can exist in stable, non-spherical shapes if the surface is covered, or 'armoured', with a close-packed monolayer of particles. When two spherical armoured bubbles are fused, jamming of the particles on the interface supports the unequal stresses that are necessary to stabilize a non-spherical shape.

Journal Article↗
PubMed2005

Solenoids and plectonemes in stretched and twisted elastomeric filaments.

We study the behavior of a naturally straight highly extensible elastic filament subjected to large extensional and twisting strains. We find that two different phases can coexist for a range of parameter values: the plectoneme and the solenoid. A simple theory based on a neo-Hookean model for the material of the filament and accounting for the slender geometry suffices to explain these observations, and leads to a phase diagram that is consistent with observations. Extension and relaxation experiments on these phases show the presence of large hysteresis loops and sawtooth-like force-displacement curves which are different for the plectoneme and the solenoid.

Computer Simulation↗
PubMed2005

Gravitational collapse of colloidal gels.

We present a unified framework for understanding the compaction of colloidal gels under their own weight. The dynamics of the collapse are determined by the value of the gravitational stress sigma(g), as compared to the yield stress sigma(Y) of the network. For sigma(g) sigma(Y), the network eventually yields, leading to rapid settling. In both cases, the rate of collapse is backflow limited, while its overall magnitude is determined by a balance between gravitational stress and network elastic stress.

Biophysics↗
PubMed2005

Physical limits and design principles for plant and fungal movements.

The typical scales for plant and fungal movements vary over many orders of magnitude in time and length, but they are ultimately based on hydraulics and mechanics. We show that quantification of the length and time scales involved in plant and fungal motions leads to a natural classification, whose physical basis can be understood through an analysis of the mechanics of water transport through an elastic tissue. Our study also suggests a design principle for nonmuscular hydraulically actuated structures: Rapid actuation requires either small size or the enhancement of motion on large scales via elastic instabilities.

Cell Wall↗
PubMed2005

Non-equilibration of hydrostatic pressure in blebbing cells.

Current models for protrusive motility in animal cells focus on cytoskeleton-based mechanisms, where localized protrusion is driven by local regulation of actin biochemistry. In plants and fungi, protrusion is driven primarily by hydrostatic pressure. For hydrostatic pressure to drive localized protrusion in animal cells, it would have to be locally regulated, but current models treating cytoplasm as an incompressible viscoelastic continuum or viscous liquid require that hydrostatic pressure equilibrates essentially instantaneously over the whole cell. Here, we use cell blebs as reporters of local pressure in the cytoplasm. When we locally perfuse blebbing cells with cortex-relaxing drugs to dissipate pressure on one side, blebbing continues on the untreated side, implying non-equilibration of pressure on scales of approximately 10 microm and 10 s. We can account for localization of pressure by considering the cytoplasm as a contractile, elastic network infiltrated by cytosol. Motion of the fluid relative to the network generates spatially heterogeneous transients in the pressure field, and can be described in the framework of poroelasticity.

Actins↗
PubMed2005

Self-organized origami.

In origami, form follows the sequential spatial organization of folds. This requires continuous intervention and raises a natural question: Can origami arise through self-organization? We answer this affirmatively by examining the possible physical origin for the Miura-ori leaf-folding patterns that arise naturally in insect wings, leaves, and other laminae-like organelles. In particular, we point out examples where biaxial compression of an elastically supported thin film, such as that due to differential growth, shrinkage, desiccation, or thermal expansion, spontaneously generates these patterns, and we provide a simple theoretical explanation for their occurrence.

Betulaceae↗
PubMed2005

Magnetic self-assembly of three-dimensional surfaces from planar sheets.

This report describes the spontaneous folding of flat elastomeric sheets, patterned with magnetic dipoles, into free-standing, 3D objects that are the topological equivalents of spherical shells. The path of the self-assembly is determined by a competition between mechanical and magnetic interactions. The potential of this strategy for the fabrication of 3D electronic devices is demonstrated by generating a simple electrical circuit surrounding a spherical cavity.

Journal Article↗
PubMed2005

Measuring the work of adhesion between a soft confined film and a flexible plate.

We present a theoretical and experimental study of a method for the determination of the adhesion strength between a thin elastomeric film bonded to a rigid substrate and a flexible plate in a geometry common in the peel test. In particular, we characterize the work of adhesion in terms of the length of an equilibrium crack, generated by a spacer of known thickness wedged between the flexible plate and adhesive film, and the elastic and geometric properties of the film and the plate. We treat both the limit of perfect bonding and that of perfect slippage at the interface of the adhesive film and the flexible plate. A series of experiments allow us to verify the theory quantitatively and thus validate our method, which ought to be of value in many technological situations.

Journal Article↗
PubMed2005

Fluid-flow-induced flutter of a flag.

We give an explanation for the onset of fluid-flow-induced flutter in a flag. Our theory accounts for the various physical mechanisms at work: the finite length and the small but finite bending stiffness of the flag, the unsteadiness of the flow, the added mass effect, and vortex shedding from the trailing edge. Our analysis allows us to predict a critical speed for the onset of flapping as well as the frequency of flapping. We find that in a particular limit corresponding to a low-density fluid flowing over a soft high-density flag, the flapping instability is akin to a resonance between the mode of oscillation of a rigid pivoted airfoil in a flow and a hinged-free elastic plate vibrating in its lowest mode.

Journal Article↗
PubMed2005

How the Venus flytrap snaps.

The rapid closure of the Venus flytrap (Dionaea muscipula) leaf in about 100 ms is one of the fastest movements in the plant kingdom. This led Darwin to describe the plant as "one of the most wonderful in the world". The trap closure is initiated by the mechanical stimulation of trigger hairs. Previous studies have focused on the biochemical response of the trigger hairs to stimuli and quantified the propagation of action potentials in the leaves. Here we complement these studies by considering the post-stimulation mechanical aspects of Venus flytrap closure. Using high-speed video imaging, non-invasive microscopy techniques and a simple theoretical model, we show that the fast closure of the trap results from a snap-buckling instability, the onset of which is controlled actively by the plant. Our study identifies an ingenious solution to scaling up movements in non-muscular engines and provides a general framework for understanding nastic motion in plants.

Biomechanical Phenomena↗