Search PubMed⌕ Search

Biomedical subjects

L M Coluccio

Publications and source records attributed to L M Coluccio.

At least 19 recordsLinked to original sources
PubMed2003

Nanometre resolution tracking of myosin-1b motility.

The movement produced by a small number of myosin molecular motors was measured with nanometre precision using single-molecule fluorescence localisation methods. The positional precision of the measurements was sufficient to reveal fluctuations in sliding velocity due to stochastic interactions between individual myosin motors and the actin filament. Dependence of sliding velocity upon filament length was measured and fluctuations in velocity were quantified by autocorrelation analysis. Optical tweezers-based nanometry was used to measure the myosin-1b step-size directly. The 10 nm power-stroke and its duty cycle ratio were consistent with values derived from in vitro sliding assays.

Journal Article↗
PubMed2000

Kinetic analyses of a truncated mammalian myosin I suggest a novel isomerization event preceding nucleotide binding.

MI(1IQ) is a complex of calmodulin and an epitope-tagged 85-kDa fragment representing the amino-terminal catalytic motor domain and the first of 6 calmodulin-binding IQ domains of the mammalian myosin I gene, rat myr-1 (130-kDa myosin I or MI(130)). We have determined the transient kinetic parameters that dictate the ATP hydrolysis cycle of mammalian myosin I by examining the properties of MI(1IQ). Transient kinetics reveal that the affinity of MI(1IQ) for actin is 12 nm. The ATP-induced dissociation of actin-MI(1IQ) is biphasic. The fast phase is dependent upon [ATP], whereas the slow phase is not; both phases show a Ca(2+) sensitivity. The fast phase is eliminated by the addition of ADP, 10 micrometer being required for half-saturation of the effect in the presence of Ca(2+) and 3 micrometer ADP in the absence of Ca(2+). The slow phase shares the same rate constant as ADP release (8 and 3 s(-)(1) in the presence and absence of Ca(2+), respectively), but cannot be eliminated by decreasing [ADP]. We interpret these results to suggest that actin-myosin I exists in two forms in equilibrium, one of which is unable to bind nucleotide. These results also indicate that the absence of the COOH-terminal 5 calmodulin binding domains of myr-1 do not influence the kinetic properties of MI(130) and that the Ca(2+) sensitivity of the kinetics are in all likelihood due to Ca(2+) binding to the first IQ domain.

Actins↗
PubMed2000

Truncation of a mammalian myosin I results in loss of Ca2+-sensitive motility.

MYR-1, a mammalian class I myosin, consisting of a heavy chain and 4-6 associated calmodulins, is represented by the 130-kDa myosin I (or MI(130)) from rat liver. MI(130) translocates actin filaments in vitro in a Ca(2+)-regulated manner. A decrease in motility observed at higher Ca(2+) concentrations has been attributed to calmodulin dissociation. To investigate mammalian myosin I regulation, we have coexpressed in baculovirus calmodulin and an epitope-tagged 85-kDa fragment representing the amino-terminal catalytic "motor" domain and the first calmodulin-binding IQ domain of rat myr-1; we refer to this truncated molecule here as MI(1IQ). Association of calmodulin to MI(1IQ) is Ca(2+)-insensitive. MI(1IQ) translocates actin filaments in vitro at a rate resembling MI(130), but unlike MI(130), does not exhibit sensitivity to 0.1-100 micrometer Ca(2+). In addition to demonstrating successful expression of a functional truncated mammalian myosin I in vitro, these results indicate that: 1) Ca(2+)-induced calmodulin dissociation from MI(130) in the presence of actin is not from the first IQ domain, 2) velocity is not affected by the length of the IQ region, and 3) the Ca(2+) sensitivity of actin translocation exhibited by MI(130) involves 1 or more of the other 5 IQ domains and/or the carboxyl tail.

Actins↗
PubMed2000

Brush border myosin I (BBMI): a basally localized transcript in human jejunal enterocytes.

To extend our recent observation that villin mRNA, encoding an apical microvillous protein, is dichotomously localized in the basal region of human enterocytes, we examined the localization of mRNAs for brush border myosin I (BBMI) and intestinal fimbrin (I-fim). In situ hybridization indicated that BBMI mRNA localized to the basal region of human enterocytes, whereas the mRNA for I-fim distributed diffusely. To facilitate study of potential mechanisms of mRNA targeting, we cloned a full-length cDNA for BBMI including its 5'- and 3'-untranslated regions (UTRs). This cDNA shares 86% sequence identity with bovine BBMI and 85% with rat BBMI. Sequence analysis revealed no obvious similarity between the 3'-UTRs of BBMI and villin. This study provides evidence of novel sorting pathways for intestinal microvillous cytoskeletal proteins.

Base Sequence↗
PubMed1999

Overlapping distribution of the 130- and 110-kDa myosin I isoforms on rat liver membranes.

The biochemical and mechanochemical properties and localization of myosin I suggest the involvement of these small members of the myosin superfamily in some aspects of intracellular motility in higher cells. We have determined by quantitative immunoblotting with isoform-specific antibodies that the 130-kDa myosin I (myr 1 gene product) and 110-kDa myosin I (myr 2 gene product) account for 0.5 and 0.4%, respectively, of total rat liver protein. Immunoblot analyses reveal that the 130- and 110-kDa myosins I are found in several purified subcellular fractions from rat liver. The membrane-associated 130-kDa myosin I is found at the highest concentration in the plasma membrane (28 ng/microg plasma membrane protein) followed by the endoplasmic reticulum-like mitochondria-associated membrane fraction (MAM; 10 ng/microg MAM protein), whereas the 110-kDa myosin I is found at the highest concentration in Golgi (50 ng/¿g Golgi protein) followed by plasma membrane (20 ng/microg) and MAM (7 ng/microg). Our analyses indicate that myosin I is peripherally associated with Golgi and MAM and its presence in these fractions is not a consequence of myosin I bound to contaminating actin filaments. Although found in relatively low concentrations in microsomes, because of the abundance of microsomes, in liver most of the membrane-associated myosin I is associated with microsomes. Neither myosin I isoform is detected in purified mitochondria. This is the first quantitative analysis addressing the cellular distribution of these mammalian class I myosins.

Animals↗
PubMed1999

Transient kinetic analysis of the 130-kDa myosin I (MYR-1 gene product) from rat liver. A myosin I designed for maintenance of tension?

The 130-kDa myosin I (MI(130)), product of the myr-1 gene, is one member of the mammalian class I myosins, a group of small, calmodulin-binding mechanochemical molecules of the myosin superfamily that translocate actin filaments. Roles for MI(130) are unknown. Our hypothesis is that, as with all myosins, MI(130) is designed for a particular function and hence possesses specific biochemical attributes. To test this hypothesis we have characterized the enzymatic properties of MI(130) using steady-state and stopped-flow kinetic analyses. Our results indicate that: (i) the Mg(2+)-ATPase activity is activated in proportion to actin concentration in the absence of Ca(2+); (ii) the ATP-induced dissociation of actin-MI(130) is much slower for MI(130) than has been observed for other myosins (-Ca(2+), second order rate constant of ATP binding, 1.7 x 10(4) M(-1) s(-1); maximal rate constant, 32 s(-1)); (iii) ADP binds to actin-MI(130) with an affinity of approximately 10 microM and competes with ATP-induced dissociation of actin-MI(130); the rate constant of ADP release from actin-MI(130) is 2 s(-1); (iv) the rates of the ATP-induced dissociation of actin-MI and ADP release are 2-3 times greater in the presence of CaCl(2), indicating a sensitivity of motor activity to Ca(2+); and (v) the affinity of MI(130) for actin (15 nM) is typical of that observed for other myosins. Together, these results indicate that although MI(130) shares some characteristics with other myosins, it is well adapted for maintenance of cortical tension.

Actins↗
PubMed1999

The motor protein myosin-I produces its working stroke in two steps.

Many types of cellular motility, including muscle contraction, are driven by the cyclical interaction of the motor protein myosin with actin filaments, coupled to the breakdown of ATP. It is thought that myosin binds to actin and then produces force and movement as it 'tilts' or 'rocks' into one or more subsequent, stable conformations. Here we use an optical-tweezers transducer to measure the mechanical transitions made by a single myosin head while it is attached to actin. We find that two members of the myosin-I family, rat liver myosin-I of relative molecular mass 130,000 (M(r) 130K) and chick intestinal brush-border myosin-I, produce movement in two distinct steps. The initial movement (of roughly 6 nanometres) is produced within 10 milliseconds of actomyosin binding, and the second step (of roughly 5.5 nanometres) occurs after a variable time delay. The duration of the period following the second step is also variable and depends on the concentration of ATP. At the highest time resolution possible (about 1 millisecond), we cannot detect this second step when studying the single-headed subfragment-1 of fast skeletal muscle myosin II. The slower kinetics of myosin-I have allowed us to observe the separate mechanical states that contribute to its working stroke.

Actins↗
PubMed1997

Myosin I.

The class I myosins are single-headed, actin-binding, mechanochemical "motor" proteins with heavy chains in the molecular mass range of 110-130 kDa; they do not form filaments. Each myosin I heavy chain is associated with one to six light chains that bind to specific motifs known as IQ domains. In vertebrate myosin I isoforms, the light chain is calmodulin, which is thought to regulate motor activity. Proteins similar to calmodulin are associated with myosin I isoforms from lower eukaryotes. Some myosin I isoforms from lower eukaryotes are regulated by phosphorylation; however, the phosphorylation site is not present in vertebrate myosin I isoforms. Based on sequence analyses of the amino terminal "head" domains, myosin I can be subdivided into several subclasses. Analyses of the biochemical properties of the isolated molecules and localization studies support the proposal of roles for these molecules in intracellular trafficking and changes in membrane structure. Our present understanding of the properties of these molecules and their proposed roles is reviewed here.

Acanthamoeba↗
PubMed1995

Phosphorylation of myosin-I from rat liver by protein kinase C reduces calmodulin binding.

Three isoforms of the cytoskeletal-associated, mechanochemical enzymes known as myosin-I have been purified from rat liver; each coisolates with calmodulin. Incubation of the purified myosin-I's with protein kinase C gamma and 32P-ATP results in phosphorylation of the myosin-I heavy chains. After phosphorylation, the myosin-I isoforms bind less radiolabeled calmodulin in binding assays than observed for control samples. Since the purified isoforms are phosphoproteins as determined by immunoblotting with monoclonal antibodies which recognize phosphoamino acids, these results indicate that phosphorylation might play a role in regulation of myosin-I.

Adenosine Triphosphate↗
PubMed1995

Identification of brush border myosin-I in liver and testis.

Brush border myosin-I, or BBMI, constitutes the lateral links that connect in intestinal microvilli the core bundle of actin filaments to the membrane. Although related molecules have been identified in other higher eukaryotic tissues, northern blot analysis has indicated that the distribution of this particular myosin-I isoform is restricted essentially to intestine. Using reverse transcriptase polymerase chain reaction we have identified BBMI in a wide range of tissues including liver and testis. Our results also indicate that in testis the BBMI gene might be alternatively spliced.

Amino Acid Sequence↗
PubMed1994

Novel 130-kDa rat liver myosin-1 will translocate actin filaments.

We have recently purified and characterized from rat liver, polypeptides of 110-kDa and 130-kDa which possess several characteristics of myosin-1 [Coluccio and Conaty: Cell Motil. Cytoskeleton 24:189-199, 1993]. What roles these myosin-1 molecules play in hepatocytes is not yet defined. One hypothesis is that they are involved in either intracellular transport or locomotion. As a first step in establishing their function, we have investigated whether these molecules are capable of supporting motility in vitro. Our results clearly demonstrate that the isolated 130-kDa-calmodulin complex will translocate filaments at a rate of 0.03-0.05 microns/sec; motility is inhibited in free calcium ion concentrations above 0.1 microM. This inhibition is reversed with the addition of exogenous calmodulin. These results provide supporting evidence of a motile role for the 130-kDa-calmodulin complex in vivo. This is the first demonstration that in higher eukaryotes, myosin-1 from a tissue other than intestine will support motility. Partial peptide sequence analysis indicates that the 130-kDa polypeptide resembles the recently described myr 1 [Ruppert et al.: J. Cell Biol. 120:1393-1403, 1993] or MM1 alpha [Sherr et al.: J. Cell Biol. 1405-1416, 1993] gene product.

Actin Cytoskeleton↗
PubMed1994

Differential calmodulin binding to three myosin-1 isoforms from liver.

We have previously purified and characterized two myosin-1 isoforms from rat liver (molecular masses 130 kDa and 110 kDa; L. M. Coluccio and C. Conaty (1993) Cell Motil. Cytoskel. 24, 189-199). Here, we describe the purification and characterization from liver of a third myosin-1 (molecular mass 105 kDa) and determine the number of calmodulin molecules associated with each of these three myosin-1 isoforms. The 105 kDa polypeptide, solubilized from liver homogenates with the addition of ATP, co-sediments with F-actin, co-purifies with calmodulin, and binds calmodulin in the presence of EGTA. Antibodies directed against chicken intestinal brush border myosin-1 cross-react with the 105 kDa polypeptide on immunoblots. Partial peptide sequence analysis indicates that the polypeptide corresponds with an MM1 gamma gene product that represents a myosin-1 isoform cloned from mouse brain (Sherr et al. (1993) J. Cell Biol. 120, 1405-1416). A comparison of calmodulin binding to the now three isolated forms of myosin-1 in liver shows that in solution the 105 kDa and 110 kDa polypeptides bind two molecules of calmodulin each whereas the 130 kDa binds six molecules of calmodulin.

Amino Acid Sequence↗
PubMed1993

Myosin-I in mammalian liver.

Myosin-I refers to a class of proteins with a molecular weight of approximately 110-kDa, which have characteristics of conventional myosin but are unable to form filaments. Previous studies have implicated myosin-I in motile cellular processes including cell migration and phagocytosis. Although the first example of myosin-I in higher eukaryotes was the intestinal 110K-calmodulin complex, which forms in microvilli the lateral links connecting the core bundle of actin filaments to the membrane, myosin-I has now been shown to be a component of rat kidney and to be present in bovine adrenal gland and brain. We have now purified and characterized two polypeptides from rat liver which have several characteristics of the intestinal 110K-calmodulin complex. Both liver polypeptides are solubilized with ATP and co-elute on gel filtration with calmodulin. The polypeptides, of 110-kDa and 130-kDa, bind calmodulin in 1 mM EGTA. Both polypeptides bind to F-actin in an ATP reversible fashion, and crosslink actin filaments. The purified polypeptides possess an actin-activated Mg(2+)-ATPase activity typical of brush border myosin-I. A polyclonal antiserum directed against the chicken intestinal 110-kDa polypeptide recognizes both rat liver polypeptides, whereas another serum recognizes the 130-kDa but not the 110-kDa rat liver polypeptide. Controlled proteolysis of the purified polypeptides with alpha-chymotrypsin indicates that the two polypeptides are distinct but related. Immunofluorescence microscopy on isolated hepatocytes shows distribution of myosin-I to be vesicular, distributed throughout the cytoplasm, but more concentrated near the nucleus. These data contribute new evidence by several functional criteria that multiple myosin-I molecules are present in higher organisms and may coexist in a single cell type.

Adenosine Triphosphatases↗
PubMed1991

Identification of the microvillar 110-kDa calmodulin complex (myosin-1) in kidney.

The epithelial layer lining the proximal convoluted tubule of mammalian kidney contains a brush border of numerous microvilli. These microvilli appear in structure to be very similar to the microvilli on epithelial cells of the small intestine. Microvilli found in both the small intestine and the proximal convoluted tubules in kidney have a core bundle of actin filaments bundled by the accessory proteins villin and fimbrin. Along the length of intestinal microvilli, lateral links can be observed to connect the core bundle of actin filaments to the membrane. These cross-bridges are comprised of a 110-kDa calmodulin complex which belongs to a class of single-headed myosin molecules, collectively referred to as myosin-1. We now report that an analogous calmodulin-binding polypeptide of 105 kDa has been identified in rat kidney cortex. The 105-kDa polypeptide is preferentially found in purified kidney brush borders, can be extracted with ATP, and co-elutes with calmodulin on gel filtration and anion exchange chromatography. Fractions containing the 105-kDa polypeptide exhibit a modest ATPase activity in buffer containing CaCl2. The partially purified 105-kDa polypeptide will bind iodinated calmodulin and will sediment with F-actin in buffer containing ethylene glycol-bis-(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid (EGTA) or Ca2+. The addition of ATP partially reverses this association with F-actin. These results indicate that myosin-1, in addition to its presence in intestinal brush borders, is present in the brush border of kidney. We also provide preliminary evidence to indicate that the 105-kDa polypeptide is not restricted to tissues possessing a brush border.

Animals↗
PubMed1990

Mapping of the microvillar 110K-calmodulin complex (brush border myosin I). Identification of fragments containing the catalytic and F-actin-binding sites and demonstration of a calcium ion dependent conformational change.

In intestinal microvilli, the 110K-calmodulin complex is the major component of the cross-bridges which connect the core bundle of actin filaments to the membrane. Our previous work showed that the 110-kDa polypeptide can be divided into three functional domains: a 78-kDa fragment that contains the ATPase activity and the ATP-reversible F-actin-binding site, a 12-kDa fragment required for binding calmodulin molecules, and a terminal 20-kDa domain of unknown function [Coluccio, L. M., & Bretscher, A. (1988) J. Cell Biol. 106, 367-374]. By analysis of limited alpha-chymotryptic cleavage products, we now show that the molecular organization is very similar to that described for the S1 fragment of myosin. The catalytic site was identified by photoaffinity labeling with [5,6-3H]UTP, and fragments binding F-actin were identified by cosedimentation assays. Cleavage of the 78-kDa fragment yielded major fragments of 32 and 45 kDa, followed by cleavage of the 45-kDa fragment to a 40-kDa fragment. Of these, only the 32-kDa fragment was labeled by [5,6-3H]UTP. Physical characterization revealed that the 45- and 32-kDa fragments exist as a complex that can bind F-actin, whereas the 40-kDa/32-kDa complex cannot bind actin. We conclude that the catalytic site is located in the 32-kDa fragment and the F-actin-binding site is present in the 45-kDa fragment; the ability to bind actin is lost upon further cleavage of the 45-kDa fragment to 40 kDa. Peptide sequence analysis revealed that the 45-kDa fragment lies within the molecule and suggests that the 32-kDa fragment is the amino terminus.(ABSTRACT TRUNCATED AT 250 WORDS)

Actins↗
PubMed1989

Reassociation of microvillar core proteins: making a microvillar core in vitro.

Intestinal epithelia have a brush border membrane of numerous microvilli each comprised of a cross-linked core bundle of 15-20 actin filaments attached to the surrounding membrane by lateral cross-bridges; the cross-bridges are tilted with respect to the core bundle. Isolated microvillar cores contain actin (42 kD) and three other major proteins: fimbrin (68 kD), villin (95 kD), and the 110K-calmodulin complex. The addition of ATP to detergent-treated isolated microvillar cores has previously been shown to result in loss of the lateral cross-bridges and a corresponding decrease in the amount of the 110-kD polypeptide and calmodulin associated with the core bundle. This provided the first evidence to suggest that these lateral cross-bridges to the membrane are comprised at least in part by a 110-kD polypeptide complexed with calmodulin. We now demonstrate that purified 110K-calmodulin complex can be readded to ATP-treated, stripped microvillar cores. The resulting bundles display the same helical and periodic arrangement of lateral bridges as is found in vivo. In reconstitution experiments, actin filaments incubated in EGTA with purified fimbrin and villin form smooth-sided bundles containing an apparently random number of filaments. Upon addition of 110K-calmodulin complex, the bundles, as viewed by electron microscopy of negatively stained images, display along their entire length helically arranged projections with the same 33-nm repeat of the lateral cross-bridges found on microvilli in vivo; these bridges likewise tilt relative to the bundle. Thus, reconstitution of actin filaments with fimbrin, villin, and the 110K-calmodulin complex results in structures remarkably similar to native microvillar cores. These data provide direct proof that the 110K-calmodulin is the cross-bridge protein and indicate that actin filaments bundled by fimbrin and villin are of uniform polarity and lie in register. The arrangement of the cross-bridge arms on the bundle is determined by the structure of the core filaments as fixed by fimbrin and villin; a contribution from the membrane is not required.

Actins↗