Biomedical subjects

L Jannière

Publications and source records attributed to L Jannière.

At least 19 recordsLinked to original sources

PubMed2003

Bacillus subtilis soil isolates: plasmid replicon analysis and construction of a new theta-replicating vector.

We have searched for plasmids in a collection of 55 Bacillus subtilis strains isolated from various natural sources of the territory of Belarus. Twenty percent of the strains contained one or two plasmids of either 6-8 or approximately 90 kb. Small plasmids were shown to carry a rolling circle replicon of the pC194 type. Four out of the eight large plasmids contained a related theta replicon that has no homolog in databases as shown by sequence determination. A B. subtilis/Escherichia coli shuttle vector based on this replicon was constructed. It has a low copy number (6 units per chromosome) and is stably inherited in B. subtilis. It might thus be a useful tool for DNA cloning. These data extend previous observations, indicating that most of the small plasmids of B. subtilis replicate as rolling circles and belong to the pC194 family. On the contrary, large plasmids appear to form a large pool of theta-replicating determinants, since three different replicons have already been isolated from them.

Amino Acid Sequence↗

PubMed2001

Two essential DNA polymerases at the bacterial replication fork.

DNA replication in bacteria is carried out by a multiprotein complex, which is thought to contain only one essential DNA polymerase, specified by the dnaE gene in Escherichia coli and the polC gene in Bacillus subtilis. Bacillus subtilis genome analysis has revealed another DNA polymerase gene, dnaE(BS), which is homologous to dnaE. We show that, in B. subtilis, dnaE(BS) is essential for cell viability and for the elongation step of DNA replication, as is polC, and we conclude that there are two different essential DNA polymerases at the replication fork of B. subtilis, as was previously observed in eukaryotes. dnaE(BS) appears to be involved in the synthesis of the lagging DNA strand and to be associated with the replication factory, which suggests that two different polymerases carry out synthesis of the two DNA strands in B. subtilis and in many other bacteria that contain both polC and dnaE genes.

Bacillus subtilis↗

PubMed2000

The RepE initiator is a double-stranded and single-stranded DNA-binding protein that forms an atypical open complex at the onset of replication of plasmid pAMbeta 1 from Gram-positive bacteria.

The RepE protein of the broad host range pAMbeta1 plasmid from Gram-positive bacteria is absolutely required for replication. To elucidate its role, we purified the protein to near homogeneity and analyzed its interactions with different nucleic acids using gel retardation assays and footprinting experiments. We show that RepE is monomeric in solution and binds specifically, rapidly, and durably to the origin at a unique double-stranded binding site immediately upstream from the initiation site of DNA replication. The binding induces only a weak bend (31 degrees ). Unexpectedly, RepE also binds nonspecifically to single-stranded DNA with a 2-4-fold greater affinity than for double-stranded origin. On a supercoiled plasmid, RepE binding to the double-stranded origin leads to the denaturation of the AT-rich sequence immediately downstream from the binding site to form an open complex. This open complex is atypical since (i) its formation requires neither multiple RepE binding sites on the double-stranded origin nor strong bending of the origin, (ii) it occurs in the absence of any cofactors (only RepE and supercoiling are required), and (iii) its melted region serves as a substrate for RepE binding. These original properties together with the fact that pAMbeta1 replication depends on a transcription step through the origin on DNA polymerase I to initiate replication and on a primosome to load the replisome suggest that the main function of RepE is to assist primer generation at the origin.

Alkylating Agents↗

PubMed2000

Efficient gene targeted random mutagenesis in genetically stable Escherichia coli strains.

We describe a method to generate in vivo collections of mutants orders of magnitude larger than previously possible. The method favors accumulation of mutations in the target gene, rather than in the host chromosome. This is achieved by propagating the target gene on a plasmid, in Escherichia coli cells, within the region preferentially replicated by DNA polymerase I (Pol I), which replicates only a minor fraction of the chromosome. Mutagenesis is enhanced by a conjunction of a Pol I variant that has a low replication fidelity and the absence of the mutHLS system that corrects replication errors. The method was tested with two reporter genes, encoding lactose repressor or lipase. The proportion of mutants in the collection was estimated to reach 1% after one cycle of growth and 10% upon prolonged cell cultivation, resulting in collections of 10(12)-10(13) mutants per liter of cell culture. The extended cultivation did not affect growth properties of the cells. We suggest that our method is well suited for generating protein variants too rare to be present in the collections established by methods used previously and for isolating the genes that encode such variants by submitting the cells of the collections to appropriate selection protocols.

Bacterial Proteins↗

PubMed1998

In vivo relations between pAMbeta1-encoded type I topoisomerase and plasmid replication.

A number of large extrachromosomal elements encode prokaryotic type I topoisomerases of unknown functions. Here, we analysed the topoisomerase Topbeta encoded by the Gram-positive broad-host-range plasmid pAMbeta1. We show that this enzyme possesses the DNA relaxation activity of type I topoisomerases. Interestingly, it is active only on plasmids that use DNA polymerase I to initiate replication, such as pAMbeta1, and depends on the activity of this polymerase. This is the first example, to our knowledge, of prokaryotic type I topoisomerase that is specific for a given type of replicon. During pAMbeta1 replication in Bacillus subtilis cells, Topbeta promotes premature arrest of DNA polymerase I, approximately 190bp downstream of the replication initiation point. We propose that Topbeta acts on the early replication intermediates of pAMbeta1, which contain D-loops formed by DNA polymerase I-mediated strand displacement. The possible role of the resulting DNA Pol I arrest in plasmid replication is discussed.

Bacillus subtilis↗

PubMed1998

Inhibition of a naturally occurring rolling-circle replicon in derivatives of the theta-replicating plasmid pIP501.

The mechanisms ensuring regulation of DNA replication in genomes containing multiple replicons are poorly understood. In this report, we addressed this question by analysing in Bacillus subtilis the replication of a derivative of the promiscuous plasmid pIP501 that carries a rolling-circle and a theta replicon. Genetic analyses revealed that the rolling-circle replicon is strongly inhibited in the derivative and that inhibition requires three elements involved in theta replication: the replication origin, the initiator RepR protein and strong transcription of the repR gene. Inhibition is, however, independent of DNA synthesis at the theta origin. We conclude that rolling-circle inhibition is caused by an inhibitory signal encoded by the theta replicon and propose that the signal is composed, at least, of the RepR protein bound to its cognate origin.

Bacillus subtilis↗

PubMed1997

Replication terminus for DNA polymerase I during initiation of pAM beta 1 replication: role of the plasmid-encoded resolution system.

Replication of plasmid pAM beta 1 is initiated by DNA polymerase I (Pol I) and completed by DNA polymerase III holoenzyme contained in the replisome machinery. In this study we report that initiation of DNA replication generates D-loop structures containing the nascent leading strand paired to its template, and that D-loop extension is arrested approximately 230 bp from the initiation site of DNA synthesis in the presence of the plasmid-encoded resolvase. In vitro and in vivo data suggest that this arrest is caused by a collision between Pol I and the resolvase bound to its target. As the arrested D-loop replication intermediates carry a single-stranded primosome-assembly site, we hypothesize that the biological role of the replication arrest is to limit the region replicated by Pol I and to promote the replacement of Pol I by the replisome in order to initiate concerted synthesis of the leading and lagging strands.

Bacillus subtilis↗

PubMed1996

In vivo analysis of the plasmid pAM beta 1 resolution system.

The promiscuous plasmid pAM beta 1 from Gram-positive bacteria encodes a resolution system which differs from that of Tn3 in that (i) it requires a histone-like protein and an unusual resolvase-DNA interaction to promote recombination and (ii) it mediates in vivo DNA inversion in plasmid substrates. In this in vivo analysis, the pAM beta 1 resolution site is narrowed down to a 99 bp segment, the strand exchange is mapped within 10 bp and the serine residue at position 10 of the resolvase is shown to be essential for enzyme activity. In addition, data showing that the resolution system does not promote DNA inversion in the Bacillus subtilis chromosome are presented. Implications of this observation are discussed.

Bacillus subtilis↗

PubMed1996

Countertranscript-driven attenuation system of the pAM beta 1 repE gene.

The plasmid-encoded RepE protein is absolutely essential and rate-limiting for replication of the promiscuous plasmid pAM beta 1 originating from Enterococcus faecalis. We previously showed that the rep gene is transcribed from a promoter that is negatively regulated (approximately 10-fold reduction) by the CopF repressor. In this report, we show that this transcription is decreased a further approximately 10-times by a countertranscript-driven transcriptional attenuation system. Extensive mutagenesis revealed that this system operates by a mechanism similar to that previously described for the unrelated repC gene of plasmid pT181.

Bacterial Proteins↗

PubMed1995

Primosome assembly site in Bacillus subtilis.

A single-strand initiation site was detected on the Enterococcus faecalis plasmid pAM beta 1 by its ability to prevent accumulation of single stranded DNA of a rolling circle plasmid, both in Bacillus subtilis and Staphylococcus aureus. This site, designated ssiA, is located on the lagging strand template, approximately 150 bp downstream from the replication origin. ssiA priming activity requires the DnaE primase, the DnaC replication fork helicase, as well as the products of the dnaB, dnaD and dnaI genes of B.subtilis, but not the RNA polymerase. The primase and the replication fork helicase requirements indicate that ssiA is a primosome assembly site. Interestingly, the pAM beta 1 lagging strand synthesis is inefficient when any of the proteins involved in ssiA activity is mutated, but occurs efficiently in the absence of ssiA. This suggests that normal plasmid replication requires primosome assembly and that the primosome can assemble not only at ssiA but also elsewhere on the plasmid. This work for the first time describes a primosome in a Gram-positive bacterium. Involvement of the B.subtilis proteins DnaB, DnaD and DnaI, which do not have any known analogue in Escherichia coli, raises the possibility that primosome assembly and/or function in B.subtilis differs from that in E.coli.

Bacillus subtilis↗

PubMed1995

pAM beta 1 resolvase has an atypical recombination site and requires a histone-like protein HU.

The broad-host-range plasmid pAM beta 1 from Gram-positive bacteria encodes a resolvase, designated Res beta, which shares homology with the proteins of the resolvase-invertase family. Here we report the purification and in vitro characterization of Res beta. This resolvase is particular in two aspects: it has an atypical binding site and requires a cofactor to promote resolution in vitro. Res beta binds to two regions within its resolution site res. One contains two inverted repeats (R1 and R2), the other contains only one repeat (R3). The cofactor required for resolution in vitro is present in crude extracts of both Bacillus subtilis and Escherichia coli and can be substituted by the E. coli histone-like protein HU. The possible mode of action of HU in the resolution process is discussed.

Bacterial Proteins↗

PubMed1994

The promiscuous plasmids pIP501 and pAM beta 1 from gram-positive bacteria encode complementary resolution functions.

pIP501 and pAM beta 1 are promiscuous plasmids from gram-positive bacteria which carry structurally and genetically related replication functions (L. Jannière, A. Gruss and S.D. Ehrlich, 1993, in "Bacillus subtilis and Other Gram-positive Bacteria: Biochemistry, Physiology, and Molecular Genetics (A.L. Sonenshein, J.A. Hoch, and R. Losick, Eds.), pp. 625-644). We report here the sequence of a approximately 1 kb region located downstream of the pIP501 minimal replicon. This region is 82% homologous to the corresponding region of pAM beta 1 and encodes a resolution system which complements that of pAM beta 1. Additionally, we present evidence that the structural similarity between the two plasmids extends for further approximately 2 kb, through a region which may encode a topoisomerase protein in pAM beta 1.

Amino Acid Sequence↗

PubMed1994

The pAM beta 1 CopF repressor regulates plasmid copy number by controlling transcription of the repE gene.

pAM beta 1 is a low-copy-number, promiscuous plasmid from Gram-positive bacteria that replicates by a unidirectional theta-type mode. Its replication is initiated by an original mechanism, involving the positive rate-limiting RepE protein. Here we show that the pAM beta 1-encoded CopF protein is involved in negative regulation of the plasmid copy number. CopF represses approximately 10-fold the transcription initiated at the promoter of the repE gene and binds to a 31 bp segment which is located immediately upstream of the -35 box of the repE promoter. We propose that CopF inhibits initiation of transcription at the repE promoter by binding to its operator.

Bacillus subtilis↗

PubMed1993

A fourth class of theta-replicating plasmids: the pAM beta 1 family from gram-positive bacteria.

Plasmid pAM beta 1 from Enterococcus faecalis uses a unidirectional theta mode of replication. We show here that this replication (i) is dependent on a plasmid-encoded replication protein (Rep) but not on a DNA structure typical for origins of most Rep-dependent plasmids and (ii) is initiated by DNA polymerase I (PolI). pAM beta 1 minimal replicon shares no homology with highly conserved ColE1-type replicons, which use PolI for initiation but do not encode a Rep, or with ColE2 and ColE3 replicons, which require PolI for replication and encode a Rep. We propose that pAM beta 1 and a number of other naturally occurring and closely related plasmids from a distinct plasmid class.

Base Sequence↗

PubMed1993

Biochemical and genetic analysis of the unidirectional theta replication of the S. agalactiae plasmid pIP501.

pIP501 is a broad-host-range plasmid originating from Streptococcus agalactiae. In this report we show that (i) it replicates by a theta mechanism initiating at the 3' end of the gene encoding the replication protein RepR and progressing in the direction of transcription of this gene; (ii) its replication origin lies within or a few nucleotides downstream from ORF R and not upstream from it as suggested in the literature (Brantl et al. (1990) Nucleic Acids Res. 18, 4783-4789); (iii) the RepR protein positively regulates pIP501 copy number; and (vi) the main function ensured by the sequences located upstream from ORF R is to express this ORF. Since the replication properties of pIP501 are indistinguishable from those of the highly related Enterococcus faecalis plasmid pAM beta 1, we conclude that these elements form the first family of theta replicating plasmids in gram-positive bacteria. Based on sequence similarities, we extend this family to the S. pyogenes plasmid pSM19035 and to 12 other plasmids isolated from streptococci or enterococci.

Bacterial Proteins↗

PubMed1991

Unidirectional theta replication of the structurally stable Enterococcus faecalis plasmid pAM beta 1.

Numerous bacterial replicons remain poorly characterized due to difficulties in localization of the replication origin. We have circumvented this problem in the characterization and fine mapping of the origin of plasmid pAM beta 1 by exploiting the Bacillus subtilis termination signal, terC. In terC-containing derivatives, theta-form molecules with two invariant endpoints accumulate. The endpoints, which correspond to plasmid origin and terC, were mapped with single-nucleotide precision. Analysis of the replication intermediates of wild-type molecules by two-dimensional gel electrophoresis confirmed the location of the plasmid origin. Our results demonstrate that pAM beta 1 replication proceeds unidirectionally by a theta mechanism. This work confirms the use of termination signals to localize origins, suggests that termination in B. subtilis occurs by a mechanism similar to that of Escherichia coli and establishes that in addition to rolling circle replicating plasmids, Gram positive bacteria harbour plasmids which replicate by a theta mechanism.

Base Sequence↗

PubMed1991

Characterization of a region of the Enterococcus faecalis plasmid pAM beta 1 which enhances the segregational stability of pAM beta 1-derived cloning vectors in Bacillus subtilis.

The nucleotide sequence of a 2.13-kb EcoRI-HindIII, pAM beta 1-derived fragment, isolated from the gram-positive cloning vector pHV1431, has been determined and shown to encode two ORFs. ORF H encodes for a protein of 23,930 Da which exhibits substantial homology to bacterial site-specific recombinases, particularly the resolvases of the gram-positive transposons Tn917 (30.3% identity) and Tn552 (31.6% identity) and the clostridial plasmid pIP404 (27.1% identity). The second ORF (I) is incomplete and encodes a polypeptide which has significant homology with Escherichia coli topoisomerase I (26.0% identity). Insertion of either the entire 2.13-kb EcoRI-HindIII fragment or a 0.73-kb EcoRI-DraI subfragment encoding only the resolvase into the pAM beta 1-based cloning vector pMTL500E causes a significant enhancement of segregational stability (from 6.5 X 10(-2) to 3.0-4.0 X 10(-3) plasmid loss per cell per generation). Improved segregational stability is mirrored by a reduction in plasmid polymerization. The introduction of a stop codon into the resolvase coding region negates its ability to promote segregational stability. It is proposed that the identified determinant stabilizes pAM beta 1-based vectors in Bacillus subtilis by maintaining the plasmid population in the monomeric state, thereby reducing the chances of producing plasmid-free segregants.

Amino Acid Sequence↗

PubMed1990

Structurally stable Bacillus subtilis cloning vectors.

Cloning of long DNA segments (greater than 5 kb) in Bacillus subtilis is often unsuccessful when naturally occurring small (less than 10 kb) plasmids are used as vectors. In this work we show that vectors derived from the large (26.5 kb) plasmids pAM beta 1 and pTB19 allow efficient cloning and stable maintenance of long DNA segments (up to 33 kb). The two large plasmids differ from the small ones in several ways. First, replication of the large plasmids does not lead to accumulation of detectable amounts of ss DNA, whereas the rolling-circle replication typical for small plasmids does. In addition, the replication regions of the two large plasmids share no sequence homology with the corresponding regions of the known small plasmids, which are highly conserved. Taken together, these observations suggest that the mode of replication of the large plasmids is different from that of small plasmids. Second, short repeated sequences recombine much less frequently when carried on large than on small plasmids. This indicates that large plasmids are structurally much more stable than small ones. We suggest that the high structural stability of large plasmids is a consequence of their mode of replication and that plasmids which do not replicate as rolling circles should be used whenever it is necessary to clone and maintain long DNA segments in any organism.

Bacillus subtilis↗