Search PubMed⌕ Search

Biomedical subjects

L Fabeck

Publications and source records attributed to L Fabeck.

At least 19 recordsLinked to original sources
PubMed2002

Anatomical and radiological correlation of Lequesne's "false profile".

Lequesne introduced a radiological projection, which is an oblique view of the edge of the acetabulum, to diagnose arthrosis affecting the anterior part of the joint and to measure the anterior coverage of the femoral head. In this study, we attempted to determine the anatomical correlation of his technique. Fifteen in vitro hemipelvises underwent radiography according to Lequesne's description, using metallic markers and wires to mark physical landmarks. According to geometric laws, the points used by Lequesne do not correlate anatomically. Although Lequesne's technique allows a diagnosis of acetabular dysplasia, measurements are on average 5.5 degrees less than those made anatomically.

Acetabulum↗
PubMed2002

Analysis of the capital femoral line orientation. A CT scan study.

An accurate knowledge of the relationship between the neck and the epiphyseal plate at the end of growth is important for biomechanical investigations of femoral neck remodelling during childhood. Statistical data about the position of the epiphyseal femoral cartilage in relation to the neck axis at the end of the growth, are rare in the literature. As the trace of the epiphysis can be observed on a CT scan view of an adult hip, cadaver femurs were investigated to study this relationship and to avoid irradiation of children. The mean anteversion angle of the epiphyseal line towards the patient's coronal plane is 2.3 degrees. The plate is retroverted in an average of 8.2 degrees in relation to the neck axis and is related to neck anteversion. The more the neck is anteverted, the more the plate is retroverted.

Femur↗
PubMed2002

Theoretical study of the decrease in the femoral neck anteversion during growth.

This theoretical analysis tries to explain the decrease of the femoral neck anteversion during growth according to well-established concepts. In the frontal plane, it was demonstrated that the capital epiphyseal plate inclination allows the plate to remain perpendicular to the resultant force applied to the hip during gait. In the transversal plane, the projection of this force varies from -24 degrees, outwards and forwards (heel strike), to 20 degrees, outwards and backwards (toe off). A mathematical formula calculates the instantaneous coordinates of the plate in this plane during gait. This kinematic study points out that the physiological value of the capital epiphyseal plate anteversion at the end of the growth is theoretically the ideal value to obtain in the transversal or horizontal plane a perpendicular relation between the orientation of this plate and the projection of the resultant force during walking.

Biomechanical Phenomena↗
PubMed2001

[Shock absorption by intermediate hip prostheses].

PURPOSE OF THE STUDY: The bipolar prosthesis was developed in an attempt to alleviate acetabular wear of conventional metallic endoprostheses. The prosthesis was designed to achieve low-friction metal-on-polyethylene inner bearing motion while decreasing shear stress across the acetabular cartilage. Although good clinical results were obtained, the principle of a persistent inner mobility was contested and some authors have assigned the delay of cartilage erosion to the shock absorption capacity of the polyethylene. The present study was focused on assessing the vibration and shock damping effect of metal monoblock and bipolar head prostheses. MATERIAL AND METHODS: The transmission of the shock wave through these two types of prostheses was studied in vitro. The two heads were first tested in a rigid environment to eliminate all external parasite frequencies. The impact excitation was applied with a hammer connected to an oscillometer. A second accelerometer was connected to the prosthesis stem. Shock wave transmission was analyzed. Secondly, the head was tested with a system vibrating in the same order of frequencies as the skeleton, with and without pre-constraint. The frequency response functions were analyzed. RESULTS: For the metallic prosthesis, the frequency of vibration recorded on the femoral stems was in a large frequency range from 0 Hz to 10 KHz. For the bipolar prosthesis, all the high frequencies of the shock wave were eliminated and only shock wave frequencies from 0 to 500 Hz were recorded. In an environmental system vibrating below 100 Hz, the metallic head did not express high frequencies of vibration. The coefficient of shock absorption was not significantly different for the two heads. DISCUSSION: In the first rigid environment, the metallic head did not filter the high frequency components of the shock wave and the bipolar head tended to eliminate high frequency components due to the flattening effect of the impulse load by the polymer. But, the lower leg is not a rigid structure and the musculo-skeletal system vibrates in frequencies below 100 Hz. In similar conditions, the increased shock-absorbing effect of the polyethylene is far more difficult to observe. For the metallic prosthesis, the recorded frequency of vibration also belongs to a small domain of frequency, from 0 Hz to 100 Hz. The range of frequency is similar for the two types of prostheses. CONCLUSION: Even though polyethylene is characterized by a more pronounced damping capacity than metallic materials, in experimental conditions simulating the vibratory characteristics of the human body, the introduction of a high-density polyethylene liner does not afford any additional shock-absorbing effect compared with a metallic head. It cannot explain cartilaginous sparing.

Equipment Failure Analysis↗
PubMed2001

Biomechanical evaluation of Hackethal's intramedullary bundle pin fixation of humeral neck fractures.

Humeral neck fractures can be stabilized using a bundle of intramedullary pins as described by Hackethal. In order to decrease the risk of pin migration, packing of the medullary cavity with as many pins as possible is sometimes recommended, but others believe that stability can be decreased by destruction of cancellous bone in the humeral head by a large bundle of pins. A surgical neck fracture was created with a saw in 30 frozen cadaveric humeri. Bone quality was evaluated by radiography and densitometry. Fractures were stabilized using Hackethal's technique of retrograde intramedullary pinning with varying numbers of 2.5-mm diameter pins; increasing torsion or bending moments of force were then applied to the bones studied. Stability was found to improve with an increasing number of pins and with higher humeral head density. Based upon these findings, the use of a large number of pins is recommended to reduce the risk of pin migration. Up to eight pins, the risk of destruction of cancellous bone in the humeral head appears very low.

Biomechanical Phenomena↗
PubMed2001

Localized pigmented villonodular synovitis of the knee with bone involvement mimicking a benign bone tumor: CT and MR findings.

The localized form of pigmented villonodular synovitis is characterized by a limited involvement of synovium. Although the knee is the joint that is commonly affected, bone changes in this location are not usual. We report the case of a histologically proven localized form of this entity in the knee, which mimicked a benign bone tumor on the basis of an MR pattern, CT findings, and scintigraphic results. Bone changes which may cause a pitfall in the diagnosis of the disorder are discussed.

Adult↗
PubMed2000

Geometrical analysis of the femoral neck torsion.

By the geometrical analysis of three cross sections the surface along the femoral neck, the second moments of area and the major axes of symmetry are obtained. The surface passing through these axes determined in each section, from the lateral to the medial third of the neck, is one of the two anatomical surfaces of symmetry of the neck. The geometric structure defined by this surface is a helicoid. No plane, in the ordinary sense of the word, has to be defined in the femoral neck. At the trochanteric junction, the major axis is inclined about 17 degrees on the anteversion plane, twists anteriorly and becomes more horizontal to finish with a mean inclination of 60 degrees at the cephalic junction. Surprisingly, this twist and then the neck torsion are in opposite directions to that suggested by the bony markers, often taken as a reference and reported in the anatomical descriptions.

Biomechanical Phenomena↗
PubMed1999

Histopathology of a well-functioning hydroxyapatite-coated femoral prosthesis after 52 months.

A fully hydroxyapatite-coated femoral implant was retrieved during autopsy. This component, provided with a bipolar femoral head, had been inserted for a displaced fracture of the femoral neck 52 months before. Osseointegration of the implant was evident, without any formation of fibrous tissue :39.9% of the perimeter of the prosthesis at the level of its proximal third was interfaced with bone (62.8% at the mid-third and 65.2% at the distal third). Remodeling of bone had ensued. Deposition of bone was most prominent in the calcar zone, along the medial and lateral aspects and around the tip. Proximally, cortical porosity was found to be increased by 73%, whereas medullary bone porosity was increased by a factor of 2. Cell-mediated resorption of the coating was systematically present in these bone remodeling areas. The average thickness of the coating was respectively 10.8, 50.2 and 151.2 microns in the proximal, mid- and distal thirds of the implant. Formation of new bone was often coupled with resorption. No debris from the coating was found in the joint tissues or in the articulating surface of the polyethylene insert. These overall histopathological features support mechanical stability of the implant and active remodelling of bone along with focal removal of HA coating associated with osteoclastic activity. No side effects from coating degradation could be demonstrated.

Aged↗
PubMed1999

[Analysis of the acetabulum anterior cover].

PURPOSE: The false profile X-Ray view as described by Lequesne, allowing the measurement of the anterior cover of the acetabulum, is a slantwise view obtained by a 65 degrees inclination of the pelvis on the radiographic plate. The errors introduced by this radiological measurement of the anterior cover are evaluated. MATERIALS AND METHODS: An anatomical and radiological analysis is conducted on 20 acetabula. The anterior cover is measured on the bone and the A point, the anterior extremity of the acetabular roof, is plumbed. Each pelvis is imaged following the Lequesne method. The VCA angle is measured with the radiological point A described by Lequesne and with the metallic point A as reference. RESULTS: The difference between the anatomical and radiological values of the anterior cover is an average by 11 degrees and undervalues the anatomical value. The deviation is reduced by the application of a trigonometrical formula. A difference between the radiological localisation of A point described by Lequesne and the metallic marker is pointed out. This difference increases when the acetabulum becomes dysplasic. CONCLUSION: The acetabular anterior cover measured with the radiological incidence described by Lequesne undervalues the real value. Moreover, the error increases when the acetabulum is dysplasic.

Acetabulum↗
PubMed1999

A method to measure acetabular cup anteversion after total hip replacement.

The authors propose a simple and practical method to measure radiologically the angle of ante- or retroversion of the acetabular cup using a goniometer. It only necessitates an anteroposterior radiograph centered on the femoral head and another one centered on the public symphysis. Special x ray equipment, compass, conversion table, mathematical formulas, or a pocket calculator are not required. The opening of the prosthetic cup is projected on the film as an ellipse. According to the rules of descriptive geometry, the true size of the angle of anteversion is easily obtained. The geometric constructions consist in drawing four lines. The adequate positioning on a hip radiograph of the protractor, drawn on the goniometer, permits the direct reading of the true and planar anteversion angles of the cup.

Acetabulum↗
PubMed1998

Use of an intramedullary hip-screw compared with a compression hip-screw with a plate for intertrochanteric femoral fractures. A prospective, randomized study of one hundred patients.

One hundred elderly patients who had an intertrochanteric femoral fracture were randomized to treatment with a compression hip-screw with a plate (fifty patients) or a new intramedullary device, the intramedullary hip-screw (fifty patients). All patients were followed prospectively for one year or until death. A detailed assessment of the functional status and the plain radiographs of the hip was performed one, three, six, and twelve months postoperatively. The two treatment groups were strictly comparable. The operative time needed to insert the intramedullary hip-screw was significantly greater than that needed to insert the compression hip-screw with the plate (p = 0.02), but use of the intramedullary hip-screw was associated with less estimated intraoperative blood loss (p = 0.011). The prevalence of perioperative complications, such as bronchopneumonia, cardiac failure, and urinary tract infection, was comparable in the two treatment groups. There were one intraoperative fracture of the femoral shaft and two intraoperative fractures of the greater trochanter in the group managed with the intramedullary hip-screw. One patient had pulling-out of the compression hip-screw on the seventh postoperative day. Four patients had a trochanteric wound hematoma, without infection, after insertion of an intramedullary hip-screw. All but one of the fractures healed. The one non-union, which was in a patient who had a compression hip-screw, was treated with a hemiarthroplasty. The mortality rate was similar in the two treatment groups. The patients who had an intramedullary hip-screw had, on the average, significantly better mobility at one (p < 0.0001) and three months (p = 0.0013) postoperatively. This difference was no longer seen at six and twelve months, although the patients who had an intramedullary hip-screw still had significantly better walking ability outside the home at those time-periods (p = 0.05). The compression hip-screw was removed from two patients because of pain in the mid-portion of the thigh, which had begun after consolidation of the fracture. Fourteen patients who had an intramedullary hip-screw had cortical hypertrophy at the level of the tip of the nail at twelve months postoperatively. Cortical hypertrophy was significantly related to the use of two interlocking screws (p = 0.02). Six of these patients also had pain in the mid-portion of the thigh, and the nail had been locked with two screws in five of them. Three of the six patients had the hardware removed because of the pain, and the symptoms resolved. A seventh patient had pain without cortical hypertrophy. The intramedullary hip-screw device was associated with significantly less sliding of the lag-screw and subsequent shortening of the limb in the region of the thigh (p = 0.012 and 0.019, respectively); these differences were more pronounced when the unstable fractures in the two treatment groups were compared (p < 0.001).

Aged↗
PubMed1998

[Study of cotyloid anteversion by coxometric measurement].

A coxometric evaluation is helpful for the diagnosis and the prognosis of hip dysplasia. These measurements also given an intrinsic guide to the surgeon for total hip arthroplasty. A coxometric protractor is drawn on the majority of the goniometers and allows the measurement of the angle of internal and external roof, the angle of the acetabular roof obliquity and the femoral neck-shaft angle on a hip AP X-ray. The purpose of this report is to demonstrate that on the same X-ray, the adequate placement of the coxometric protractor allows to calculate the inclination angle, the acetabular anteversion angles and the anterior roof angle.

Acetabulum↗
PubMed1997

Radiocarpal articular pressures during the reduction of distal radius fractures.

OBJECTIVES: To measure in vivo radiocarpal articular pressures during closed reduction and external fixation of distal radius fractures. DESIGN: Intraoperative measurements using a sterile pressure sensitive sensor specially constructed for this application. SETTING AND PATIENTS: Ten patients with a closed distal radius fracture stabilized by radiometacarpal external fixation. Radiocarpal pressures measured during transarticular distraction, wrist palmar flexion, wrist ulnar inclination, and fracture reduction. MAIN OUTCOME MEASUREMENTS AND RESULTS: Transarticular distraction resulted in a substantial decrease of the articular pressure, averaging -158.1 mmHg. Palmar flexion resulted in a mean pressure increase of 91.8 mmHg. The reduction of the fracture using a combination of distraction, palmar flexion and ulnar deviation resulted in either an increase or decrease of articular pressure, but always with a tendency toward progressive normalization of the pressure, with a mean slope of 3.2 mmHg/min. CONCLUSIONS AND CLINICAL RELEVANCE: The phenomena leading to the reduction of distal radius fractures could be related in part to a decrease of the intraarticular pressure, which may be responsible for a suction effect on the intraarticular bone fragments.

Adolescent↗
PubMed1995

Cancellous bone in human acetabulum: microradiographic and histomorphometric aspects.

The acetabular cancellous bone of 18 subjects aged 57-88 years was characterized by low mass and a poorly ramified pattern according to microradiographic analysis. There was no correlation between the histomorphometric data of this region and those of the iliac crest. Microcalluses were visible in 13 acetabular samples, whereas they were absent from the iliac crest. As the acetabular trabeculae appeared decidedly longitudinal, age-related bone rarefaction is suggested to occur in two different ways: uniform thinning of the trabeculae and selective disappearance of transverse elements. The remaining longitudinal trabeculae are considered to be most useful for the weight-bearing function of the hip joint.

Acetabulum↗
PubMed1994

[Contribution to the study of pelvic stress during weight-bearing. Role of the pubic branch and trabecular bone].

INTRODUCTION: Several authors have reported evidence of loosening of the acetabular component in 14 per cent of cases at 10 years follow-up. To understand this phenomena, parametric studies of the acetabulum have involved finite element analysis, photo elastic models or strain gauges. The differing and sometimes contradictory results were due to the way the model was solicited. If the classic "Resultant" is accurate for the study of the forces on the hip, Pauwels described other forces on the pelvis during the gait. The effect of the application of these other forces on the acetabulum are the object of this study. MATERIALS AND METHOD: Four pelvises were loaded with different forces. Nine strain gauges were pasted around the acetabulum. The pelvis was loaded up to 140 Kg and a compressive force was applied to the pubis by 10 Kg increments up to 40 Kg. The stress data with and without the second force were recorded. A cortical window was bored on the anterior inferior iliac spine. Through this patch, the trabecular bone of the acetabular roof was cut up to disturb its mechanical properties. The load was once again applied to the pelvis and the stress data recorded. RESULTS: The compressive force applied to the symphyseal surface decreases the deformation of the posterior acetabular rim and increases deformation in the proximity of the ischio-iliac and iliopubic junctions. The disruption of trabecular bone generates an increase in deformation mainly perpendicularly to the acetabular rim. DISCUSSION: The decrease of the stress on the posterior acetabular rim is interpreted as a reduction of the solicitations on a fragile zone and its increase on the iliopubic and ischio iliac junctions expresses the application of the acetabular horn on the femoral head permitting better settling of the hip during the gait. The constatation of a stress increase around the acetabulum after disruption of the traecbular bone is interesting. The bone behavior with different acetabular cup models on different pelvis may be studied by strain gauges pasted on the cortical bone. The variable quality of the trabecular bone may introduce an error factor in the measurement. CONCLUSION: The deformation of the acetabulum during gait has to be studied following the different forces described by Pauwels. The compressive force on the pubic symphysis during one leg stance permits a decrease of the stress on the acetabular rim and an increase in the setting of the femoral head. Different qualities of trabecular bone change the deformation of the cortical bone for an equivalent load. This incites us, in comparative studies, to be careful in the deduction of the acetabular roof stresses from the recorded cortical bone deformations.

Aged↗