Search PubMed⌕ Search

Biomedical subjects

L Claes

Publications and source records attributed to L Claes.

At least 19 recordsLinked to original sources

1[alpha],25-dihydroxyvitamin D(3) enhances annexin II dependent proliferation of osteoblasts.

Cells experience a variety of physiological and non-physiological stresses and consequently have appropriate mechanisms to deal with such deviations from homeostasis. Particularly subject to mechanical stress and shear forces are the cells that make up the bones. Osteoblastic cells can interpret this stress as a stimulus for proliferation; however, the molecular mechanisms underlying this phenomenon are poorly understood. We have identified annexin II as being specifically upregulated in mechanically stressed osteoblasts and found that increased levels of this protein are necessary for 1[alpha],25-dihydroxyvitamin D(3) mediated augmentation of the proliferative response of osteoblasts after mechanical stress. Our data demonstrate a novel interaction between 1[alpha],25-dihydroxyvitamin D(3) and annexin II in the proliferative response of osteoblasts as well as a novel function for annexin II in the stress response. These findings may offer new therapeutic opportunities for conditions that require regenerative osteoblastic activity such as osteoporosis.

Adult↗

Changes in stretch reflex excitability are related to "giving way" symptoms in patients with anterior cruciate ligament rupture.

A rupture of the anterior cruciate ligament (ACL) usually leads to an altered stretch reflex excitability of the thigh muscles that stabilize the knee. The purpose of this study was to quantitatively assess reflex activity in the m. semitendinosus/semimembranosus after anterior tibial translation in 21 patients with isolated ACL ruptures. The patients were divided into a group with "giving way" symptoms (noncopers, n = 12) and a group without "giving way" symptoms (copers, n = 9). While the patients were standing upright with 30 degrees knee flexion, a force of 300 N was applied to the knee to induce posterior-anterior tibial translation. Activity of m. semitendinosus/semimembranosus was measured using surface electromyography (EMG). A linear potentiometer was placed on the tibial tuberosity and measured maximum tibial translation during standing (i.e., functional condition). In addition, knee laxity was assessed with a KT1000 arthrometer under passive conditions. After ACL rupture, the short-latency response (SLR) latency remained unchanged (P = 0.21), whereas for the medium-latency response (MLR) it was significantly longer (P < 0.001). Significantly longer MLR latencies were noted for noncopers compared with copers (P < 0.01), whereas SLR latencies were similar. Significant differences between healthy and injured legs were noted after tibial translations using KT1000 (P < 0.001) and during stance (P < 0.001). Mechanical knee instability was found to be unchanged between copers and noncopers (KT1000: P = 0.97; tibial translation: P = 0.31). These results indicate that ACL rupture is associated with altered stretch reflex excitability, which may lead to "giving way" symptoms, and that altered stretch reflex excitability may be more important for the development of "giving way" than the mechanical instability of the knee.

Adult↗

A novel GABRG2 mutation associated with febrile seizures.

Mutations in the gene encoding the gamma2 subunit of the gamma-aminobutyric acid type A receptor (GABRG2) have been reported to cause childhood absence epilepsy (CAE), febrile seizures (FS), and generalized epilepsy with FS plus (GEFS+). The authors analyzed GABRG2 in 47 unrelated patients with CAE, FS, and GEFS+ and identified a novel mutation that cosegregated with FS. Electrophysiologic studies demonstrated altered current desensitization and reduced benzodiazepine enhancement in mutant receptors.

Belgium↗

Biomechanical performance of the new BeadEx implant in the treatment of osteoporotic vertebral body compression fractures: restoration and maintenance of height and stability.

BACKGROUND: Vertebral compression fractures are counted among the most common complications of osteoporosis. For treatment, a new, alternative implant has been developed (BeadEx, Expandis, Hof HaCarmel, Israel). The aim of the present in vitro study was to evaluate whether this implant is able to restore the initial height and three-dimensional stability after fracture and whether it is able to maintain this height and stability during complex cyclic loading. METHODS: The BeadEx implant consists of small titanium rolls, which are pressed into the vertebral body through specially designed, hollow pedicle screws. The height and the three-dimensional flexibility of 18 bisegmental spine specimens (nine T12-L2, nine L3-L5) was measured, first, before and after creating a wedge compression fracture at the middle vertebral body (L1 resp. L4), second, after treatment of the fracture, and, third, during and after complex cyclic loading. The fractures were treated either with BeadEx plus internal fixator, BeadEx plus bone cement or vertebroplasty for comparison. FINDINGS: The height before fracture could almost be restored by BeadEx plus bone cement but not by BeadEx plus fixator and vertebroplasty. The total height loss after cyclic loading was smallest with BeadEx plus bone cement (in median -4.7mm with respect to the intact specimens) but -6.2mm with BeadEx plus fixator and -7.8mm with vertebroplasty. The three-dimensional stability of the specimens was clearly higher if treated with BeadEx plus fixator than with BeadEx plus bone cement or vertebroplasty. INTERPRETATION: From a biomechanical point of view, BeadEx plus bone cement can be recommended as an alternative to vertebroplasty in the treatment of osteoporotic vertebral body fractures. BeadEx plus fixator can be recommended if additional stability is needed.

Biomechanical Phenomena↗

In vitro fixator rod loading after transforaminal compared to anterior lumbar interbody fusion.

BACKGROUND: Cages are commonly used to assist lumbar interbody fusion. They are implanted from various approaches. In many cases internal fixators are added to provide sufficient stability. However, how the rods of these fixators are loaded and whether the kind of approach affects these loads is still unknown. The aim of this in vitro study therefore was to determine the loads acting on fixator rods and cages after anterior compared to transforaminal lumbar interbody fusion. METHODS: Six intact human lumbar spine specimens (L1-5) were loaded in a spine tester with pure moments (+/-7.5 N m) in the frontal, sagittal and transverse plane. Loading was repeated, first, after the segments L2-3 and L4-5 were instrumented either with an anterior or a transforaminal lumbar interbody fusion cage "stand alone" and, second, after additional stabilisation with an internal fixator. The rods of the fixator and the four "corners" of the cages were instrumented with strain gauges. FINDINGS: The loads transmitted through the rods were highest in lateral bending. In this loading direction an axial distraction force of in median up to 140 N, an axial compression force of up to 100 N, and a resultant bending moment of up to 1.1 N m were measured in each rod. These loads tended to be lower for the anterior compared to the transforaminal approach. For comparison, the load applied was +/-7.5 N m. The axial strains recorded in the four "corners" of the cages considerably varied from one specimen to the other. Differences in cage strain between the two approaches could not be detected. INTERPRETATION: The loads acting on the rods of the fixator were small compared to the load that was applied. Thus, other structures such as the cages or the facet joints still play an important role in load transfer. The type of approach (anterior or transforaminal) had only little effect on the loading of the rods. This also applies to the local loading of the cages, which probably more depends on the fit between cage and endplates and on the local stiffness properties of the adjacent vertebral bodies.

Aged↗

Influence of a dynamic stabilisation system on load bearing of a bridged disc: an in vitro study of intradiscal pressure.

In recent years, non-fusion implants to stabilise the lumbar spine have become more and more popular. However, little is known on the load bearing of such dynamic stabilisation systems. In order to investigate the load bearing of discs bridged with rigid and dynamic stabilisation systems, six lumbar cadaver spines were mounted in a spine tester and loaded with pure moments in the three main motion planes. Four different states of the specimens were studied: intact, destabilised, stabilisation with a Dynesys and stabilisation with an internal fixator. Intradiscal pressure (IDP) measurements were used to assess the load bearing of the bridged disc. In the neutral unloaded position, there were small but not significant differences in disc pressure for the four states of the treated disc (P>0.05). Concerning the disc pressure during the course of loading, both the Dynesys and internal fixator did significantly reduce the pressure change from neutral to extension in comparison to the intact state (-0.05, -0.04 and +0.24 MPa, respectively) (P<0.05). Compared to the intact state, there was no significant pressure change from neutral to flexion (0.14, 0.15 and 0.18 MPa, respectively) (P>0.05). The devices apparently eliminated the pressure change from neutral to lateral bending (Dynesys 0.01 MPa, Fixator 0.01 MPa and intact 0.24 MPa), but due to large variations in the intact and defect states the differences were not significant (P>0.05). In axial rotation, the pressure change for the internal fixator was reduced compared to the intact state; however, the change was only significant in left axial rotation (P<0.05). The Dynesys showed no significant differences (P>0.05) in axial rotation. No changes in IDP were seen in the adjacent discs for either the Dynesys or the internal fixator. Our results showed that the IDPs for both devices were similar, but altered compared to the intact disc.

Adult↗

Intraoperative direct mechanical stimulation of the anterior cruciate ligament elicits short- and medium-latency hamstring reflexes.

The anterior cruciate ligament (ACL) has not only a mechanical but also a sensorimotor function. Patients with injuries of the ACL frequently complain of knee instability despite good mechanical stabilization after surgical reconstruction. Compared with healthy subjects, their latencies of hamstring reflexes after anterior tibia translation are considerably increased. There is evidence for the existence of a reflex arc between the ACL and the hamstrings. The aim of this study was to determine if there is a direct reflex response after an isolated mechanical stimulation of the ACL in humans. In 10 patients who underwent arthroscopy, hamstring electromyographic (EMG) responses were assessed intraoperatively after applying an isolated load on the ACL. Latencies, amplitudes, and integrals of the EMG responses were analyzed. In four patients, the measurements were repeated after injection of local anesthetics into the ACL. In all subjects, responses with mean latencies of 42 +/- 4.4 (SD) ms corresponding to a medium latency response (MLR) were found. In seven subjects, they were preceded by responses with a short-latency (SLR) of 24 +/- 2.7 ms. The maximum amplitude was 8.6 +/- 7 mV, the integral 0.064 +/- 0.05 mV*s. The injection of local anesthetics reduced the amplitude by 34 +/- 12% and the integral by 50 +/- 20%. Direct mechanical stimulation of the ACL evokes considerably smaller SLRs and MLRs than anterior tibia translation during standing. It is argued that latency changes observed in patients with ACL ruptures may be rather due to changes in the sensorimotor integration of the afferent input from the knee joint than to the absence of the direct ACL reflex.

Adult↗

A novel susceptibility locus at 2p24 for generalised epilepsy with febrile seizures plus.

Generalised epilepsy with febrile seizures plus (GEFS+) is a clinically and genetically heterogeneous epilepsy syndrome. Using positional cloning strategies, mutations in SCN1B, SCN1A, and GABRG2 have been identified as genetic causes of GEFS+. In the present study, we describe a large four generation family with GEFS+ in which we performed a 10 cM density genome-wide scan. We obtained conclusive evidence for a novel GEFS+ locus on chromosome 2p24 with a maximum two point logarithm of the odds (LOD) score of 4.22 for marker D2S305 at zero recombination. Fine mapping and haplotype segregation analysis in this family delineated a candidate region of 3.24 cM, corresponding to a physical distance of 4.2 Mb. Linkage to 2p24 was confirmed (p = 0.007) in a collection of 50 nuclear and multiplex families with febrile seizures and epilepsy. Transmission disequilibrium testing and association studies provided further evidence (p < 0.05) that 2p24 is a susceptibility locus for febrile seizures and epilepsy. Furthermore, we could reduce the candidate region to a 2.14 cM interval, localised between D2S1360 and D2S2342, based upon an ancestral haplotype. Identification of the disease gene at this locus will contribute to a better understanding of the complex genetic aetiology of febrile seizures and epilepsy.

Chromosomes, Human, Pair 2↗

[Clinical results with A new retrograde femoral nail with a radiographical-free proximal locking device. A prospective study with 50 fractures].

INTRODUCTION: Conventional retrograde nailing of the femur causes two important disadvantages: the proximal locking of the nail is difficult because of the anatomic conditions and a chondral defect was left into the knee. MATERIAL AND METHODS: After the retrograde implantation the new nail was lead through the greater trochanter. An additional proximal aiming device for proximal interlocking can be fixed. The entrance portal will be sealed by an osteochondral cylinder. 50 cases of femur fractures were selected for the prospective study. We recorded all intraoperative complications and technical difficulties. The cases were followed up for 52 weeks, both clinical and radiology examinations were performed. RESULTS: The mean follow up was 15.5+/-5 months. All fractures were healed. Knee movement was 125+/-14 degrees. The Leung Score was 84+/-12.6 points; HSS Score was 90+/-9 points. In two cases wound infections were developed. Mal-union was observed in three cases, in two cases nail brake down. CONCLUSIONS: The new retrograde interlocking nail could be used to manage femur fractures successfully. Two aiming devices enable a easy interlocking. Replacement of the osteochondral cylinder into the entry portal reduces cartilage damage.

Adolescent↗

Differentiation of hamstring short latency versus medium latency responses after tibia translation.

After injuries to the anterior cruciate ligament (ACL) a functional instability is frequently observed which has been attributed to a disturbed sensorimotor function. In light of the clinical importance of ACL injuries and the resulting functional instability, it is of enormous clinical interest to elucidate the role of sensorimotor pathways that involve the ACL. In animals and humans a direct reflex pathway between the ACL and the hamstrings has been shown. The onset latencies of responses reported after ventral tibia translation were around 40-50 ms (range 17.9-65) and were regarded as medium latency responses (MLR). However, ventral tibia translation should also induce a stretch of the hamstring muscles and evoke a short latency response (SLR). Before any muscle response after ventral tibia translation can be ascribed to anatomical structures, it is crucial to analyze the obtained muscle responses carefully. The aim of the present study was the development of an algorithm to differentiate SLR and MLR responses after ventral tibia translation. In ten healthy subjects reflex responses of the hamstrings after anterior tibia translation and after tendon taps on the biceps femoris tendon were evaluated. To investigate the influence of skin afferents, control experiments were performed after lidocain injection of the dorsal calf. The mean onset latency of the tendon jerk reflex was 21.9 +/- 3.1 ms (range 17.3 - 28.7 ms). Both SLR responses (mean onset latency: 20.3 +/- 3.5 ms; range 15.4 - 25.8) and MLR responses (mean onset latency: 38.9 +/- 4.2 ms; range 32.9 - 46.7) were obtained in all subjects. Skin afferents from the calf do not play a major role. The development of an evaluation algorithm is presented that allows a safe differentiation between these partly superimposed SLR and MLR components. It is demonstrated that by measuring the first part of the SLR from the onset to the first peak the end of the SLR can be predicted and that the onset latency of the MLR component can be assessed reliably. Possible reasons are discussed why previous studies only reported responses at MLR latencies. The fact that both SLR and MLR components can be observed after anterior tibia translation underlines the necessity to differentiate the responses before they can be ascribed to any anatomical structures. As a basis for future work the algorithm presented may become a useful tool to differentiate which afferent pathways play a role in initiating hamstring activity.

Adult↗

Tissue engineering of bone: effects of mechanical strain on osteoblastic cells in type I collagen matrices.

The aim of the present study was to investigate the effect of cyclic uniaxial mechanical strain on a human osteoblastic precursor cell line (hFOB 1.19) in three-dimensional type I collagen matrices. Cell seeded collagen constructs were mechanically stretched by a daily application of cyclic uniaxial strain using a special motor-driven apparatus and compared to unstretched controls. Expression of genes involved in cell proliferation and osteoblastic differentiation as well as matrix production were investigated by analyzing the mRNA of histone H4, core binding factor 1, alkaline phosphatase, osteopontin, osteocalcin, and collagen type I (Col I) up to a cultivation period of 3 weeks using real-time PCR. Cyclic stretching of cell seeded Col I matrices at a magnitude occurring in healing bone increased cell proliferation and slightly elevated the expression of nearly all investigated genes over unstrained controls at various time points. It was concluded that mechanical load promotes the proliferation and differentiation of osteoblastic precursor cells in a Col I matrix and that the application of mechanical stimuli may have a beneficial effect on in vitro tissue formation.

Biocompatible Materials↗

Determination of muscle loading at the hip joint for use in pre-clinical testing.

The stability of joint endoprostheses depends on the loading conditions to which the implant-bone complex is exposed. Due to a lack of appropriate muscle force data, less complex loading conditions tend to be considered in vitro. The goal of this study was to develop a load profile that better simulates the in vivo loading conditions of a "typical" total hip replacement patient and considers the interdependence of muscle and joint forces. The development of the load profile was based on a computer model of the lower extremities that has been validated against in vivo data. This model was simplified by grouping functionally similar hip muscles. Muscle and joint contact forces were computed for an average data set of up to four patients throughout walking and stair climbing. The calculated hip contact forces were compared to the average of the in vivo measured forces. The final derived load profile included the forces of up to four muscles at the instances of maximum in vivo hip joint loading during both walking and stair climbing. The hip contact forces differed by less than 10% from the peak in vivo value for a "typical" patient. The derived load profile presented here is the first that is based on validated musculoskeletal analyses and seems achievable in an in vitro test set-up. It should therefore form the basis for further standardisation of pre-clinical testing by providing a more realistic approximation of physiological loading conditions.

Computer Simulation↗

Population-level retrospective study of neurologically expressed disorders in ruminants before the onset of bovine spongiform encephalopathy (BSE) in Belgium, a BSE risk III country.

A retrospective epidemiological study (n = 7,875) of neurologically expressed disorders (NED) in ruminants before the onset of the bovine spongiform encephalopathy epidemic (years studied, 1980 to 1997) was carried out in Belgium. The archives of all veterinary laboratories and rabies and transmissible spongiform encephalopathy (TSE) epidemiosurveillance networks were consulted. For all species, a significantly higher number of NED with virological causes (rabies) was reported south of the Sambre-Meuse Valley. During the period 1992 to 1997, for which the data were complete, (i) the predicted annual incidence of NED varied significantly as a function of species and area (higher numbers in areas where rabies was present) but was always above 100 cases per million, and (ii) the mean incidence of suspected TSE cases and, among them, those investigated by histopathological examination varied significantly as a function of species and area. The positive predictive value of a presumptive clinical diagnosis of NED ranged from 0.13 (game) to 0.63 (sheep). Knowledge of the positive predictive value permits the definition of a reference point before certain actions (e.g., awareness and training campaigns) are undertaken. It also shows the usefulness of a systematic necropsy or complementary laboratory tests to establish an etiological diagnosis. TSE analysis of a small, targeted historical sampling (n = 48) permitted the confirmation of one case and uncovered another case of scrapie. The results of the present study help to develop and maintain the quality of the worldwide clinical epidemiological networks for TSE, especially in countries that in the past imported live animals, animal products, and feedstuffs from countries with TSE cases.

Animals↗

Anatomical repair of lateral ligaments in patients with chronic ankle instability.

In a prospective study, 19 patients with chronic ankle instability underwent clinical and radiographic reexaminations 36 months after anatomical reconstruction. In addition, dynamic pedography was conducted and peroneal reaction time measured on a tilting platform for an evaluation of functional aspects. Prior to this examination, 32 patients had been asked to fill in a questionnaire and make a detailed subjective evaluation of current discomfort, stability, flexibility and sporting abilities. Eighty-eight percent of the patients reported satisfactory results; only 3% complained of persistent instability. In 71% the ability to take part in sports had improved after surgery, and 85% of the patients reported unrestricted walking abilities. Supination ability was impaired in 5% of the patients at the follow-up. The radiographic examination showed restored ankle stability with a significant reduction of talar tilt and talar translation; a postoperative increase in signs and symptoms of arthrosis was not observed. Dynamic pedography showed a large degree of symmetry of plantar pressure distribution after surgery. There were no significant differences in peroneal reaction time in the repaired and intact ankles. The results of the study show that it is possible to restore ankle stability with anatomical reconstruction without impairing the range of movement in the ankle joint complex. Progressive osteoarthrosis can be prevented.

Ankle Joint↗

In vitro low-speed side collisions cause injury to the lower cervical spine but do not damage alar ligaments.

Whether injuries to the alar ligaments could be responsible for complaints of patients having whiplash injury in the upper cervical spine is still controversially discussed. It is known that these ligaments protect the upper cervical spine against excessive lateral bending and axial rotation movements. The objective of the present in vitro study was therefore to examine whether the alar ligaments or any other structures of the cervical spine are damaged in side collisions. In a specially designed acceleration apparatus, six human osteoligamentous cervical spine specimens were subjected to incremental 90 degrees side collisions from the right (1 g, 2 g, 3 g, etc.) until structural failure occurred. A damped pivot table accounted for the passive movements of the trunk during collision, and a dummy head (4.5 kg) ensured almost physiological loading of the specimens. For quantification of functional injuries, the three-dimensional flexibility of the specimens was tested in a spine tester before and after each acceleration. In all six specimens, structural failure always occurred in the lower cervical spine and always affected the facet joint capsules and the intervertebral discs. In four specimens, this damage occurred during the 2 g collision, while in the other two it occurred during the 3 g and 4 g collision, respectively. The flexibility mainly increased in the lower cervical spine (especially in lateral bending to both sides) and, to a minor extent, in axial rotation. In vitro low-speed side collisions caused functional and structural injury to discoligamentous structures of the lower cervical spine, but did not damage the alar ligaments. Since the effects of muscle forces were not taken into account, the present in vitro study reflects a worst-case scenario. Injury thresholds should therefore not be transferred to reality.

Acceleration↗

Bone morphogenetic protein 2 accelerates osteointegration and remodelling of solvent-dehydrated bone substitutes.

INTRODUCTION: lt was the purpose of this study to investigate how bone morphogenetic protein 2 (BMP-2) influences remodelling and the biomechanics of solvent-dehydrated bone in the long run. Furthermore, the early influence of this growth factor on the substitute was investigated. MATERIALS AND METHODS: Using a weight-bearing animal model, solvent-dehydrated bone was implanted in the tibial head of merino sheep ( n=12) after being loaded with BMP-2 (100 microg/100 microl). At 4 weeks ( n=6) and 9 months ( n=6) after surgery, histomorphological, histomorphometrical and biomechanical investigations were performed. RESULTS: At 9 months after implantation of BMP-2-loaded specimens, the bone per tissue volume was high, with levels above those of physiological cancellous bone. The amount of remaining solvent-dehydrated bone was markedly decreased, and in contrast, the amount of newly formed bone was extremely high. The specimen degradation had already occurred within the first 4 weeks after implantation, showing no further impact throughout the 9-month period. Biomechanical investigations at 9 months after implantation demonstrated a yield strength which achieved levels at least equivalent to physiological cancellous bone. BMP-2 showed no significant impact on the biomechanical properties after 4 weeks, compared to specimens prior to implantation. CONCLUSION: BMP-2 predominantly has an impact on the early implant degradation as well as bone formation, which leads to an almost completed bone remodelling of the solvent-dehydrated specimen within the study period of 9 months.

Animals↗

Finite helical axes of motion are a useful tool to describe the three-dimensional in vitro kinematics of the intact, injured and stabilised spine.

The finite helical-axes method can be used to describe the three-dimensional in vitro kinematics of the spine. However, this method still suffers from large stochastic calculation errors and poorly conceived visualisation techniques. The aim of the present study, therefore, was to improve the currently used finite helical axes description, by use of a less error-prone calculation algorithm and a new visualisation technique, and to apply this improved method to the study of the three-dimensional in vitro kinematics of the spine. Three-dimensional, continuous motion data of spinal motion segments were used to calculate the position and orientation of the finite helical axes (FHAs). The axes were then projected on plane antero-posterior, lateral and axial radiographs in order to depict the relation to the anatomy of each individual specimen. A hinge joint was used to estimate the measurement error of data collection and axes calculation. In an exemplary in vitro experiment, this method was used to demonstrate the ability of a prosthetic disc nucleus to restore the three-dimensional motion pattern of lumbar motion segments. In the validation experiment with the hinge joint, the calculated FHAs were lying within +/-2.5 mm of the actual joint axis and were inclined relative to this axis at up to +/-1.5 degrees . In the exemplary in vitro experiment, the position and orientation of the FHAs of the intact specimens were subject to large inter-individual differences in all loading directions. Nucleotomy of the lumbar segments caused the axes to spread out, indicating complex coupled motions. The implantation of the prosthetic disc nucleus, for the most part, more than reversed this effect: the axes became oriented almost parallel to each other. The experiments showed that the present improved description of finite helical axes is a valid and useful tool to characterise the three-dimensional in vitro kinematics of the intact, injured and stabilised spine. The main advantage of this new method is the comprehensive visualisation of joint function with respect to the individual anatomy.

Algorithms↗

[Effects of mechanical strain on human osteoblastic precursor cells in type I collagen matrices].

BACKGROUND: The aim of the present study was to investigate the effect of mechanical strain on human osteoblastic precursor cells in a three-dimensional scaffold. METHODS: Osteoblastic precursor cells were seeded in a collagen type I gel and mechanically stretched by daily application of cyclic uniaxial strain. The expression of histone H4, core binding factor 1, alkaline phosphatase, osteopontin, osteocalcin, and collagen type I was investigated by analysing the mRNA. Cell and matrix orientation were investigated by scanning electron microscopy. RESULTS: Cyclic stretching increased cell proliferation. The expression of osteogenic markers was slightly increased by mechanical strain. The cells and matrix were strictly oriented in the stress direction. CONCLUSION: The application of mechanical load might have a beneficial effect on the quality and quantity of generated bone tissue and might be a important factor in tissue engineering of bone.

Alkaline Phosphatase↗