Search PubMed⌕ Search

Biomedical subjects

Krassimir D Danov

Publications and source records attributed to Krassimir D Danov.

12 recordsLinked to original sources

Disjoining pressure of thin films stabilized by nonionic surfactants.

In this article an attempt is made to derive a comprehensive theory of the disjoining pressure of thin liquid films, stabilized by low molecular nonionic surfactants. We accounted for effects playing a role in the case of surfactants with spherical hydrophilic heads: (i) The thermal fluctuations of the adsorbed surfactant molecules, due to the fact that the energy of adsorption of a -CH(2)- group is approximately equal to the average thermal energy k(B)T; (ii) The contribution of the collisions between molecules adsorbed on different surfaces; (iii) The restriction imposed on the fluctuation of the molecules by the presence of a second surface situated at a small distance h from the interface where the molecules are adsorbed; (iv) The volume of the hydrophilic heads, which expels part of the water molecules from the film region; (v) The equilibrium between the molecules adsorbed at the film surfaces and at the menisci surrounding the film. The adsorption on the film surfaces has two main effects. First, the concentration of solute inside the film region becomes larger than in the bulk solution and this will push the solvent toward the film thus creating an osmotic pressure (the disjoining pressure), which tends to increase the film thickness. Second, the higher concentration inside the film and the collisions between the polar heads lead to higher chemical potential, which pushes the surfactant toward the meniscus. We treated these effects by modifying adequately the Hildebrand-Scatchard theory for the osmotic pressure of concentrated solutions. The partition function of the surfactant, needed for this calculation, was found by deriving an expression for the configurational integral, based on virial expansion. The surface equations of state of Helfand, Frisch and Lebowitz and Volmer were critically analyzed and then generalized, by using the partition function obtained by virial expansion, to permit the derivation of partition functions of the surfactant molecules in the film. A simple thermodynamic approach was developed and applied to derive expressions for the disjoining pressure, Pi, and the chemical potential of the surfactant molecules in the film, mu. They were used to calculate numerically Pi and mu and analyze their dependence on the film thickness h and the surface coverage theta. It turned out that Pi has completely different behavior above and below h=2d, where d is the diameter of the hydrophilic head. For thick films, with h>2d, the decay of Pi is initially exponential (due mainly to the thermal fluctuations of the adsorbed molecules), followed by a long tail, proportional to h(-2), due to the contribution of the osmotic pressure of the displaced solvent molecules. At h<2d the collisions between the molecules adsorbed at different surfaces are hindered, which leads to a steady decrease of the contribution due the interaction between the molecules. The overall result of these effects is the appearance of a maximum of Pi at h=2d. It is very large (it may reach 1000 atm and even more) and depends strongly on the surfactant adsorption. To facilitate the application and the analysis of the theory, we derived several simpler asymptotic expressions. One of them is virial expansion, which is valid for small surface coverage and has the advantage of being independent of the adsorption model. The other asymptotic expression is applicable at h>2d, which is the region where the stabilization of the film occurs. We compared our theory with the simpler theory of Israelachvili and Wennerström. It turned out that while both theories lead to decay of Pi vs. h, the numerical results and the shape of the curves are usually very different. The experimental data, which could be used to verify our theory, are scarce, but we found reasonable agreement with the data of Lyle and Tiddy for bilayers of C(12)EO(4). The data of Parsegian et al. for lipid bilayers also confirmed qualitatively some of our theoretical conclusions.

Journal Article↗

Maximum bubble pressure method: Universal surface age and transport mechanisms in surfactant solutions.

Here, based on the theoretical analysis of results for two ionic surfactants, sodium dodecyl sulfate (SDS) and dodecyl trimethylammonium bromide (DTAB), we develop a new approach for quantitative interpretation of data from the maximum bubble pressure method. A given tensiometer is characterized by an apparatus function, A(t), and by an apparatus constant. The former represents the time dependence of the bubble surface area, whereas the latter is expressed through integrals of A(t). The experiment indicates that both of them are independent of the surfactant type and concentration. Moreover, if a certain criterion is satisfied, the experimental results depend on the surface dilatation only through the apparatus constant. This makes the data interpretation much easier. The knowledge of the apparatus constant gives a general time scale (universal surface age) that makes the results independent of the specific bubble-pressure setup and produces dynamic surface tension curves that are universal characteristics of the investigated solutions. A new equation for data processing is proposed, which provides excellent fits of the dynamic surface tension. In the case of micellar solutions, the data analysis enables one to identify the kinetic regime of adsorption (among four possible regimes). For the investigated surfactant solutions, the diffusion regime "BC" was identified, for which the fast micellar process is equilibrated, whereas the slow micellar process is negligible. Upgraded with the developed approach for quantitative data interpretation, the bubble-pressure tensiometry could be a useful tool for a detailed analysis of the adsorption processes in more complex systems.

Journal Article↗

Influence of electrolytes on the dynamic surface tension of ionic surfactant solutions: expanding and immobile interfaces.

Here, we derive analytical asymptotic expressions for the dynamic surface tension of ionic surfactant solutions in the general case of nonstationary interfacial expansion. Because the diffusion layer is much wider than the electric double layer, the equations contain a small parameter. The resulting perturbation problem is singular and it is solved by means of the method of matched asymptotic expansions. The derived general expression for the dynamic surface tension is simplified for the special case of immobile interface and for the maximum bubble pressure method (MBPM). The case of stationary interfacial expansion is also considered. The effective diffusivity of the ionic surfactant essentially depends on the concentrations of surfactant and nonamphiphilic salt. To test the theory, the derived equations are applied to calculate the surfactant adsorption from MBPM experimental data. The results excellently agree with the adsorption determined independently from equilibrium surface-tension isotherms. The derived theoretical expressions could find application for interpreting data obtained by MBPM and other experimental methods for investigating interfacial dynamics.

Journal Article↗

Shape of the capillary meniscus around an electrically charged particle at a fluid interface: comparison of theory and experiment.

Here, we consider in detail the problem of the shape of the capillary meniscus around a charged colloidal particle, which is attached to a fluid interface: oil/water or air/water. The meniscus profile is influenced by the electric field created by charges at the particle/nonpolar fluid boundary. We digitized the coordinates of points from the meniscus around silanized glass spheres (200-300 mum in radius) attached to the tetradecane/water interface. The theoretical meniscus shape is computed in three different ways that give numerically coincident results. It is proven that for sufficiently small particles the meniscus profile can be expressed as a superposition of pure electric and gravitational deformations. Special attention is paid to the comparison of theory and experiment. A procedure for data processing is developed that allows one to obtain accurate values of the contact angle and surface charge density from the fit of the experimental meniscus profile. For all investigated particles, excellent agreement between theory and experiment is achieved. The results indicate that the electric field gives rise to an interfacial deformation of medium range and considerable amplitude.

Journal Article↗

Electric forces induced by a charged colloid particle attached to the water-nonpolar fluid interface.

Here, we solve the problem about the electric field of a charged dielectric particle, which is adsorbed at the water-nonpolar fluid (oil, air) boundary. The solution of this problem is a necessary step for the theoretical prediction of the electrodipping force acting on such particle, as well as of the electrostatic repulsion and capillary attraction between two adsorbed particles. In accordance with the experimental observations, we consider the important case when the surface charges are located at the particle-nonpolar fluid boundary. To solve the electrostatic problem, the Mehler-Fock integral transform is applied. In the special case when the dielectric constants of the particle and the nonpolar fluid are equal, the solution is obtained in a closed analytical form. In the general case of different dielectric constants, the problem is reduced to the numerical solution of an integral equation, which is carried out by iterations. The long-range asymptotics of the solution indicates that two similar particles repel each other as dipoles, whose dipole moments are related to the particle radius, contact angle, dielectric constant and surface charge density. The investigated short-range asymptotics ensures accurate calculation of the electrodipping force. For a fast and convenient application of the obtained results, the derived physical dependencies are tabulated as functions of the contact angle and the dielectric constants.

Journal Article↗

Interactions between particles with an undulated contact line at a fluid interface: capillary multipoles of arbitrary order.

A colloidal particle adsorbed at a fluid interface could have an undulated, or irregular contact line in the presence of surface roughness and/or chemical inhomogeneity. The contact-line undulations produce distortions in the surrounding liquid interface, whose overlap engenders capillary interaction between the particles. The convex and concave local deviations of the meniscus shape from planarity can be formally treated as positive and negative "capillary charges," which form "capillary multipoles." Here, we derive theoretical expressions for the interaction between two capillary multipoles of arbitrary order. Depending on the angle of mutual orientation, the interaction energy could exhibit a minimum, or it could represent a monotonic attraction. For undulation amplitudes larger than 5 nm, the interaction energy is typically much greater than the thermal energy kT. As a consequence, a monolayer from capillary multipoles exhibits considerable shear elasticity, and such monolayer is expected to behave as a two-dimensional elastic solid. These theoretical results could be helpful for the understanding of phenomena related to aggregation and ordering of particles adsorbed at a fluid interface, and for the interpretation of rheological properties of particulate monolayers. Related research fields are the particle-stabilized (Pickering) emulsions and the two-dimensional self-assembly of microscopic particles.

Journal Article↗

Interfacial rheology of adsorbed layers with surface reaction: on the origin of the dilatational surface viscosity.

A theoretical study of the phenomena, occurring in an adsorbed layer, subject to small dilatational perturbations was carried out. Two main processes, provoked by the perturbations (surface reaction and surfactant transport onto the surface) were considered. The reaction was described by means of the reaction coordinate. The derived general rheological equation for insoluble surfactants, gave as limiting cases Voight and Maxwell type equations for fast and slow reactions, respectively. Expressions for all characteristics of the process (surface elasticity, reaction elasticity, reaction relaxation time and dilatational surface viscosity) were obtained. The obtained generalized rheological equation for reactions involving soluble surfactants is a dynamic analog of Gibbs adsorption isotherms for a multi-component system with surface reaction, since similarly to Gibbs equation it relates the surface stress only to surface variables. It gives as limiting cases generalized forms for soluble surfactants of Voight and Maxwell equations. All new rheological equations were analyzed for deformations with constant rate and periodic oscillations and they were applied to three simple surface reactions (monomolecular with one product, dimerization and association). The mass transfer was analyzed initially in the absence of surface reaction. In this system the surface stress is purely elastic, but it was shown that if the adsorption perturbation is small, regardless of the type of surface perturbation and the mechanism of adsorption, the process of mass transport always obeys a Maxwell type rheological equation. For all considered processes surface viscosities were defined, but they were called "apparent", because they stem from diffusion, rather than from interaction between the surfactant molecules and they depend not only on surface parameters, but also on the geometry of the system. The often used in the literature correlations between the lifetime of emulsions and foams and the imaginary elasticity were analyzed. It was shown that this approach lacks serious scientific foundations and could lead to erroneous conclusions. Finally, the problem for the coupling of the surfactant diffusion with the chemical reaction was analyzed and it was demonstrated on a simple example how it could be tackled.

Adsorption↗

Evaluation of the precision of drop-size determination in oil/water emulsions by low-resolution NMR spectroscopy.

The accuracy of the recently reported low-resolution NMR method (Goudappel, G. J. W.; et al. J. Colloid Interface Sci. 2001, 239, 535) for the determination of drop-size distribution in oil-in-water emulsions is evaluated by comparing the NMR results with precise data from video-enhanced optical microscopy. A series of 27 soybean-oil-in-water emulsions, differing in their mean drop size, polydispersity, oil volume fraction, and emulsifier, is studied. Soybean oil is selected as a typical component of food emulsions. The experimental error of our optical procedure for drop-size determination is estimated to be around 0.3 microm, which allows us to use the microscopy data as a reference for the mean drop-size and distribution width of the studied emulsions, with known experimental error. The main acquisition parameters in the NMR experiment are varied to find their optimal values and to check how the experimental conditions affect the NMR results. Comparison of the results obtained by the two methods shows that the low-resolution NMR method underestimates the mean drop size, d33, by approximately 20%. For most of the samples, NMR measures relatively precisely the distribution width (+/-0.1 to 0.2 dimensionless units), but for approximately 20% of the samples, larger systematic deviation was registered (underestimate by 0.3-0.4 units). No correlation is found between the emulsion properties and the relative difference between the microscopy and NMR data. Possible reasons for the observed discrepancy between NMR and optical microscopy are discussed, and some advantages and limitations of the low-resolution NMR method are considered.

Emulsions↗

Electrodipping force acting on solid particles at a fluid interface.

We report experimental results which show that the interfacial deformation around glass particles (radius, 200-300 microm) at an oil-water (or air-water) interface is dominated by an electric force, rather than by gravity. It turns out that this force, called for brevity "electrodipping," is independent of the electrolyte concentration in the water phase. The force is greater for oil-water than for air-water interfaces. Under our experimental conditions, it is due to charges at the particle-oil (instead of particle-water) boundary. The derived theoretical expressions, and the experiment, indicate that this electric force pushes the particles into water. To compute exactly the electric stresses, we solved numerically the electrostatic boundary problem, which reduces to a set of differential equations. Convenient analytical expressions are also derived. Both the experimental and the calculated meniscus profile, which are in excellent agreement, exhibit a logarithmic dependence at long distances. This gives rise to a long-range electric-field-induced capillary attraction between the particles, detected by other authors. Deviation from the logarithmic dependence is observed at short distances from the particle surface due to the electric pressure difference across the meniscus. The latter effect gives rise to an additional short-range contribution to the capillary interaction between two floating particles. The above conclusions are valid for either planar or spherical fluid interfaces, including emulsion drops. The electrodipping force, and the related long-range capillary attraction, can engender two-dimensional aggregation and self-assembly of colloidal particles. These effects could have implications for colloid science and the development of new materials.

Journal Article↗

Hydrodynamic instability and coalescence in trains of emulsion drops or gas bubbles moving through a narrow capillary.

We investigate the effect of surfactant on the hydrodynamic stability of a thin liquid film formed between two emulsion drops or gas bubbles, which are moving along a narrow capillary. A ganglion (deformed drop or bubble in a pore) is covered by an adsorption monolayer of surfactant. Due to the hydrodynamic viscous friction, the surfactant is dragged from the front part of a moving ganglion toward its rear part. Consequently, the front and rear parts are, respectively, depleted and enriched in adsorbed surfactant. When such two ganglia move one after another, surfactant molecules desorb from the rear part of the first ganglion and are transferred by diffusion, across the intermediate liquid film, to the front part of the second ganglion. This leads to the appearance of a diffusion-driven hydrodynamic instability, which may cause coalescence of the two neighboring drops or bubbles. The coalescence occurs through a dimple-like perturbation in the film thickness, which is due to a local lowering in the pressure caused by a faster circulation of the liquid inside the film, which in turn is engendered by the accelerated surfactant diffusion across the thinner parts of the film. The developed theory predicts the critical distance between the two ganglia, which corresponds to the onset of coalescence, and its dependence on the radius of the capillary channel, velocity of motion, surfactant concentration and type of the operative surface forces. The results can be useful for a better understanding and quantitative description of the processes accompanying the flow of emulsions and foams though porous media.

Journal Article↗

Adsorption relaxation for nonionic surfactants under mixed barrier-diffusion and micellization-diffusion control.

Relaxation processes of surfactant adsorption and surface tension, which are characterized by two specific relaxation times, are theoretically investigated. We are dealing with fluid interfaces and small initial deviations from equilibrium. For surfactant concentrations below the critical micellization concentration (CMC), we consider adsorption under mixed barrier-diffusion control. General analytical expressions are derived, which are convenient for both numerical computations and asymptotic analysis. Series expansions for the short- and long-time limit are derived. The results imply that the short-time asymptotics is controlled by the adsorption barrier, whereas the long-time asymptotics is always dominated by diffusion. Furthermore, for surfactant concentrations above the CMC, adsorption under mixed micellization-diffusion control is considered. Again, a general analytical expression is derived for the relaxation of surfactant adsorption and surface tension, whose long- and short-time asymptotics are deduced. The derived equations show that at the short times the relaxation is completely controlled by the diffusion, whereas the long-time asymptotics is affected by both demicellization and diffusion. The micellar effect is manifested as an exponential (rather than square-root) decay of the perturbation. The derived expressions are applied to process available experimental data for the nonionic surfactant Triton X-100 and to determine the respective demicellization rate constant.

Journal Article↗

Stability of draining plane-parallel films containing surfactants.

The stability of partially mobile draining thin liquid films with respect to axisymmetric fluctuations was studied. The material properties of the interfaces (Gibbs elasticity, surface and bulk diffusions) were taken into account. When studying the long wave stability of films, the coupling between the drainage and perturbation flows was considered and the lubrication approximation was applied. Two types of wave modes were examined: radially-bounded and unbounded waves. The difference between the thickness of loss of stability, h(st), the transitional thickness, h(tr), at which the critical wave causing rupture becomes unstable, and the critical thickness, h(cr), when the film ruptures, is demonstrated. Both the linear and the non-linear theories give h(st) > h(tr) > h(cr). The numerical results show that the interfacial mobility does not significantly influence the thickness of the draining film rupture. The interfacial tension and the disjoining pressure are the major factors controlling the critical thickness. The available experimental data for critical thicknesses of foam and emulsion films show excellent agreement with the theoretical predictions. The important role of the electromagnetic retardation term in the van der Waals interaction is demonstrated. Other published theories of the film stability are discussed.

Journal Article↗