Search PubMed⌕ Search

Biomedical subjects

Kiyokatsu Jinno

Publications and source records attributed to Kiyokatsu Jinno.

At least 19 recordsLinked to original sources
PubMed2006

Simultaneous derivatization/preconcentration of volatile aldehydes with a miniaturized fiber-packed sample preparation device designed for gas chromatographic analysis.

A novel in-needle sample preparation device has been developed for the determination of volatile aldehydes in gaseous samples. The needle device is designed for the gas chromatographic (GC) analysis of aldehydes and ketones commonly found in typical in-house environments. In order to prepare the extraction device, a bundle of polymer-coated filaments was longitudinally packed into a specially designed needle. Derivatization reactions were prompted by 2,4-dinitrophenylhydrazine (NDPH) included in the needle, and so the aldehydes and ketones were derivatized to the corresponding hydrazones and extracted with the extraction needle. A reproducible extraction needle preparation process was established, along with a repeatable derivatization/extraction process that ensures the successful determination of aldehydes. The storage performance of the extraction needle was also evaluated at room temperature for three days. The results demonstrate the successful application of the fiber-packed extraction device to the preparation of a gaseous sample of aldehydes, and the future possibility of applying the extraction device to the analysis of in-house environments.

Journal Article↗
PubMed2006

Isocratic separation of ginsenosides by high-performance liquid chromatography on a diol column at subambient temperatures.

An improved high-performance liquid chromatographic method for separation of a number of ginsenosides has been developed. The influence of temperature (from 0 to 25 degrees C) on the retention and separation of the ginsenosides was studied by applying a binary mobile phase (acetonitrile/water, 82:18 v/v) and a diol column (LiChrospher 100 Diol). The column temperature is one of the more important parameters for the retention and separation of the components investigated. Selected thermodynamic parameters, including changes of enthalpy (deltaH degrees) and entropy (deltaS degrees), were estimated from linear van't Hoff plots, and possible retention mechanisms were discussed. Moreover, the best separation conditions were selected based on optimization criteria including maximum retention time (t(R max)), minimum resolution (R(s min)), and relative resolution product (r). Temperature regions close to 14 degrees C offered the highest selectivity and almost equal distribution of the ginsenosides peaks across the chromatogram. Under such isocratic conditions, excellent separation of chromatographic standards and selected ginseng samples was achieved in less than 16 min.

Chromatography, High Pressure Liquid↗
PubMed2006

Optimization of capillary electrophoretic enantioseparation for basic drugs with native beta-CD as a chiral selector.

This study presents the advantages of the 20 microm inner diameter (id) capillary for the enantioseparation of ten basic drugs with native beta-CD as the chiral selector. The apparent binding constants of each enantiomeric pair were determined to calculate the optimum beta-CD concentration ([beta-CD]opt) and the optimization was subsequently carried out. Comparison of the 20 microm id with 50 microm id were made in terms of the results obtained in the optimization and detection limits. Applying the optimum conditions for each compound, reproducible results (RSD from 0-3; n>5) were obtained for the 20 microm id capillary. Although the sensitivity is lower in the 20 microm id capillary, the LOD determined using this capillary is still found to be acceptable for the ten basic drugs studied. Enhanced resolution and faster analysis times were the main advantages observed with the use of this capillary in enantioseparation.

Adrenergic beta-Agonists↗
PubMed2006

Evaluation of methanol-water and acetonitrile-water binary mixtures as eluents for temperature-dependent inclusion chromatography.

In the present study the solubility of beta-cyclodextrin and 2-hydroxypropyl-beta-cyclodextrin at sub-zero and elevated temperatures (-10 and +30 degrees C) for a given composition of methanol/water and acetonitrile/water binary mixtures (Xs = 0.16) was studied. Moreover, the freezing temperature profiles of acetonitrile-based chromatographic mobile phases were measured, and the obtained results were compared with data available in the literature. Furthermore, the effect of the macrocycles concentration on the liquid-phase freezing points was determined. The low solubility of native beta-cyclodextrin in a methanol/water mixture at sub-zero temperature as well as the non-linear behavior of acetonitrile/water mixtures that were observed concerning the freezing point profile are discussed from a practical point of view.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMed2005

In-needle extraction device designed for gas chromatographic analysis of volatile organic compounds.

A novel in-needle extraction device has been developed for the preconcentration of gaseous organic compounds prior to the determination in gas chromatography (GC). As the extraction medium, a copolymer of methacrylic acid and ethylene glycol dimethacrylate was synthesized. Based on the results in the preliminary experiments, the desorption conditions such as desorption temperature and time have been optimized along with the evaluation of the extraction efficiency. The storage performance of the needle extraction device was also studied. The results clearly demonstrated the excellent extraction performance for typical organic solvents and also suggested the future possibility such as in the applications for the analysis of working environments.

Chromatography, Gas↗
PubMed2005

High-temperature separation with polymer-coated fiber in packed capillary gas chromatography.

High-temperature gas chromatographic separation of several synthetic polymer mixtures with Dexsil-coated fiber-packed columns was studied. A bundle of heat-resistant filaments, Zylon, was longitudinally packed into a short metal capillary, followed by the conventional coating process with Dexsil 300 material. Prior to the packing process the metal capillary was deactivated by the formation of a silica layer. The typical size of the resulting column was 0.3-mm i.d., 0.5-mm o.d., 1-m length, and packed with about 170 filaments of the Dexsil-coated Zylon. The column temperature could be elevated up to 450 degrees C owing to the good thermal stability of the fiber, Dexsil coating, and metal capillary; furthermore, this allowed the separation of low-volatile compounds to be studied.

Chromatography, Gas↗
PubMed2005

Surface derivatization of poly(p-phenylene terephthalamide) fiber designed for novel separation and extraction media.

The surface derivatization of poly(p-phenylene terephthalamide) fiber was studied. The obtained surface-derivatized filaments were packed into a fused-silica capillary to evaluate its surface characteristics by using GC. As the stationary phase for GC the surface-derivatized fibers showed higher retention for alkanes and alkylbenzenes than that with the untreated Kevlar fiber. The improvements on the retention power and the peak shape were observed on the benzyl-modified fibrous stationary phase. The derivatized fibrous materials were also evaluated as the extraction medium in fiber-in-tube SPE, and the effect of the surface modification on the extraction power was compared to the parent fiber. The results indicated that the modified fiber possessed a higher extraction power than the untreated fiber. Based on the facts, the successful modification of the fiber surface was estimated.

Journal Article↗
PubMed2005

Molecular-dynamics simulation for the characterization of liquid chromatographic stationary phase: effect of temperature.

The influence of temperature on the surface structure of the octadecylsilica (ODS) bonded phase was investigated with a molecular dynamics (MD) simulation. The MD simulation was applied to a molecular model consisting of three parts: amorphous silica base, dimethyloctadecylsilyl ligands and n-hexane as a mobile phase solvent. More detailed information on the effect of temperature was obtained at the low temperature region than that reported in our previous study. The motion of ODS ligands could be estimated by the mean square displacement (MSD) of the terminal carbon atoms of ODS ligands. The gauche fraction in the ODS ligand conformation can also be estimated to obtain the ligand conformation for each simulation condition in detail. It can be seen that an elevated temperature induced the more bent ligand conformation. The trend has a good agreement to that of the results experimentally observed by using various spectroscopic techniques such as nuclear magnetic resonance (NMR), Fourier-transform infrared spectroscopy (FT-IR), and Raman spectroscopy.

Journal Article↗
PubMed2004

Development of miniaturized sample preparation with fibrous extraction media.

Introducing fine polymeric filaments as the extraction medium, a miniaturized sample preparation technique for micro-column liquid chromatography (micro-LC) has been developed along with the investigation of a reproducible preparation scheme of the extraction capillary. The polymeric filaments were packed longitudinally into either a fused-silica capillary or a polyether ether ketone (PEEK) capillary of appropriate dimensions, and the extraction capillary was installed to the injection valve in micro-LC system. The number of packed filaments should be precisely counted before the packing process to make sure the reproducible preparation of the extraction capillary. With conventional stationary phase materials for open-tubular gas chromatography, polymeric coating to the surface of the filaments was also studied in order to further enhance the extraction performance and selectivity. Coated with the polymeric material suitable for the extraction of particular analyte, a dramatic improvement on the extraction power was obtained. The results suggest that the future possibility of novel tailored fibrous extraction medium with an appropriate coating on it, especially for the analysis of complex sample matrices.

Chromatography, Liquid↗
PubMed2004

Capillary columns in liquid chromatography: between conventional columns and microchips.

Liquid chromatography on columns with small internal diameters has been reviewed as the intermediate technique between conventional liquid chromatography and microchip separations. The development of micro column separations in the early years has been described, starting with the papers of Horváth and co-workers and Ishii and co-workers, continuing into the first part of the eighties, then making a leap in time to recent innovations with small-bore columns. Based on internal diameters a classification of the different analytical HPLC columns has been suggested. The advantages of small-bore columns have been discussed, with particular emphasis on the advantage of coupling to concentration sensitive detectors when the sample amount is limited. Open tubular columns are treated as a part of the historic background. The recent developments include a brief look into the current status of monolithic columns, the use of packed nano columns and micro columns with electrospray mass spectrometry, and the potential of two-dimensional comprehensive liquid chromatography. Finally, the coupling of sample preparation to analytical columns and the future applications of the novel technological improvements to the microchip separation methods have been discussed.

Journal Article↗
PubMed2004

Characterization of the microscopic surface structure of the octadecylsilica stationary phase using a molecular-dynamics simulation.

The influence of the mobile-phase composition and temperature on the surface structure of the octadecylsilica (ODS) stationary-phase was investigated by applying a molecular-dynamics (MD) simulation. The molecular model to which the MD simulation was applied consisted of three parts: an amorphous silica base, dimethyloctadecylsilyl ligands and mobile-phase solvents. More detailed information on the effect of the mobile-phase composition was obtained by constructing larger molecular models than those used in our previous study. The thickness of the hydrocarbon layer of the stationary phase could be estimated based on the distance between the carbon atom located at the terminal end of the ODS ligand and the silica gel surface. The structural information obtained by the calculation showed good consistency with the experimentally observed values. The gauche fraction in the ODS ligand conformation could be also estimated to obtain a more detailed ligand conformation for each molecular model. It was found that as the temperature increased, the ligand conformation collapsed more. This trend was the same as the experimentally observed trends obtained by NMR, FT-IR, and Raman spectroscopic techniques.

Computer Simulation↗
PubMed2004

Polymer-coated fibrous stationary phases in packed-capillary gas chromatography.

Fibrous synthetic polymers have been introduced as the support material for packed capillaries in gas chromatography. The filaments of the polymers were packed longitudinally into a fused-silica capillary, followed by the conventional coating process for open-tubular capillaries. With various polysiloxane-based polymeric materials coated onto these filaments, it was demonstrated that the retentivity was significantly improved over conventional wall-coated capillaries of the same length and that the selectivity can be tuned by selecting different coating materials chosen for the various purposes. The results clearly showed the contribution of the fibrous support and the polymer-coating to the retention of analytes. They also showed the bright possibility for a novel usage of fine fibrous polymers as the support material, which can be combined with a newly-synthesized coating materials designed for particular separations.

Journal Article↗
PubMed2003

Polymer-coated fibrous materials as the stationary phase in packed capillary gas chromatography.

Synthetic polymer filaments have been introduced as the support material in packed capillary gas chromatography (GC). The filaments of the heat-resistant polymers, Zylon, Kevlar, Nomex, and Technora, were longitudinally packed into a short fused-silica capillary, followed by the conventional coating process for open-tubular GC columns. The separation of several test mixtures such as n-alkylbenzenes and n-alkanes was carried out with these polymer-coated fiber-packed capillary columns. With the coating by various polymeric materials on the surface of these filaments, the retentivity was significantly improved over the parent fiber-packed column (without polymer coating) as well as a conventional open-tubular capillary of the same length. The results demonstrated a good combination of Zylon as the support and poly(dimethylsiloxane)-based materials as the coating liquid-phase for the successful GC separation of n-alkanes and polycyclic aromatic hydrocarbons (PAHs), while successful applications for other separations such as poly(ethylene glycol) coating for the separation of alcohols were also obtained. From the results it has been suggested that the selectivity of the fiber-packed column could be tuned by selecting different coating materials, indicating the promising possibility for a novel usage of fine fibrous polymers as the support material that can be combined with newly synthesized coating materials specially designed for particular separations. Taking advantage of good thermal stability of the fibers, the column temperature could be elevated to higher than 350 degrees C with the combination of a short metallic capillary.

Journal Article↗
PubMed2003

Miniaturized sample preparation combined with liquid phase separations.

Miniaturized sample preparation methods designed as the sample pretreatment for liquid phase separations, such as liquid chromatography, capillary electrophoresis and capillary electrochromatography, have been reviewed especially for the on-line coupling of the sample preparation process and the separation process. The development of the desorption interfaces for the effective combining of the sample preparation and subsequent liquid phase separations is briefly described along with the applications of the combined analytical systems to the analysis of complex sample mixtures such as biological and environmental matrices. Novel use of fine polymeric filaments as the extraction medium for microscale liquid phase separation methods are investigated and a comparison is made with other sample preparation techniques. Polymer coating onto the fibrous material is also introduced to further develop microscale sample preparation methods with improved extraction performance. Several other microscale sample preparation methods having a potential compatibility to the liquid phase separations are also described for future applications of these techniques.

Chromatography, Liquid↗
PubMed2003

Polymer-coated fibrous extraction medium for sample preparation coupled to microcolumn liquid-phase separations.

Polymer-coated fibrous material has been introduced as the extraction medium for a miniaturized sample preparation method being coupled with microcolumn liquid chromatography. The preconcentration and the subsequent liquid chromatographic separation of tricyclic antidepressants (TCAs) drugs, amitriptyline, imipramine, nortriptyline and desipramine, was carried out with the hyphenated system. Several basic experimental parameters, such as extraction and separation conditions, were investigated along with the applicability of the method for the analysis of biological fluids. The results clearly showed that the on-line coupled system could be a powerful tool for the analysis of complex mixtures in biological matrix without a large solvent consumption and specially designed instruments. The lowest limit of quantification was quite acceptable for the analysis of TCAs in clinical and forensic situations.

Antidepressive Agents, Tricyclic↗
PubMed2002

Polymer-coated synthetic fibers designed for miniaturized sample preparation process.

Miniaturized sample preparation technique for complex sample matrices has been developed with a polymer-coated fibrous extraction medium. Several hundreds of fine fibrous materials were packed longitudinally into a fused-silica capillary followed by a polymeric coating on it to prepare the extraction capillary. The extraction capillary was installed in a liquid chromatograph as a sample loop of the injection valve. The on-line coupled sample preparation/separation system demonstrated a good validity for the analysis of phthalates in real river and wastewater samples. The lowest limits of quantification for several phthalates were less than 1 ng/ml. The effect of polymeric coating to the filaments on the extraction power was also investigated.

Chromatography, High Pressure Liquid↗