Biomedical subjects

Kirk J Ziegler

Publications and source records attributed to Kirk J Ziegler.

7 recordsLinked to original sources

PubMed2006

Cutting of single-walled carbon nanotubes by ozonolysis.

Cutting of single-walled carbon nanotubes (SWNT) has been achieved by extensive ozonolysis at room temperature. Perfluoropolyether (PFPE) was selected as a medium for cutting SWNT due to its high solubility for ozone (O3). A mixture of 9 wt % of O3 in O2 was bubbled through a homogeneous suspension of pristine SWNT in PFPE, at room temperature. The intense disorder mode in the Raman spectra of ozonated SWNT indicates that extensive reaction with the sidewalls of SWNT occurs during ozonolysis. Atomic force microscopy (AFM) images of SWNT, before and after ozonolysis, provided a measure of the extent of the cutting effects. Monitoring of the evolved gases for both pristine and purified SWNT indicates CO2 was produced during the ozonolysis process with a dependence on both system pressure and temperature. During heating, FTIR analysis of gases released indicated that carbon oxygen groups on the sidewalls of SWNT are released as CO2. SWNT was found to be extensively cut after an ozone treatment with a yield of approximately 80% of the original carbon.

Journal Article↗

PubMed2005

Pore size engineering in mesoporous silicas using supercritical CO2.

In this paper we investigate the use of supercritical carbon dioxide (sc-CO(2)) for synthesizing calcined mesoporous silicas with tunable pore sizes, wall thickness, and d spacings. Small angle neutron scattering was used to probe the controlled swelling of the triblock copolymer surfactant templating agents, P123 (PEO(20)PPO(69)PEO(20)), P85 (PEO(26)PPO(39)PEO(26)), and F127 (PEO(106)PPO(70)PEO(106)), as a function of CO(2) pressure. The transition from the liquid crystal phase to the calcined mesoporous silicas, formed upon condensation and drying, was also studied in detail. Powder X-ray diffraction, transmission electron microscopy, and nitrogen adsorption techniques were used to establish pore diameters, silica wall widths, and the hexagonal packing of the pores within the calcined silicas. Using a direct templating method, the diameters of mesopores and the spacing between the pores could be tuned with a high level of precision. The swelling process was observed to have no detrimental effects on the quality of silica formed, a distinct advantage over conventional swelling techniques, and all of the silicas synthesized in this study were highly ordered over distances of at least 2000 A.

Adsorption↗

PubMed2005

Controlled oxidative cutting of single-walled carbon nanotubes.

The oxidation reaction of piranha solutions with purified HiPco carbon nanotubes was measured as a function of temperature. At high temperatures, piranha is capable of attacking existing damage sites, generating vacancies in the graphene sidewall, and consuming the oxidized vacancies to yield short, cut nanotubes. Increased reaction time results in increasingly shorter nanotubes. However, significant sidewall damage occurs as well as selective etching of the smaller diameter nanotubes. On the other hand, room-temperature piranha treatments show the capability of cutting existing damage sites with minimal carbon loss, slow etch rates, and little sidewall damage. Combined with a method of introducing controlled amounts of damage sites, these room-temperature piranha solutions have the potential to yield an efficient means of creating short, cut nanotubes.

Journal Article↗

PubMed2005

Developing implantable optical biosensors.

Nanobiotechnologists are developing devices that can measure specific enzymes and proteins. These devices are expected to detect single enzyme or protein molecules accurately, providing highly sensitive biosensing applications. A recent study by Strano and co-workers shows that single-walled carbon nanotubes (SWNTs) hold great promise as implantable biosensors. Although most researchers have focused on substrate-oriented biosensors, Strano and colleagues have shown that the inherent fluorescent properties of suspended individual SWNTs can be used for solution-phase beta-D-glucose sensing.

Animals↗

PubMed2005

Length-dependent extraction of single-walled carbon nanotubes.

A two-phase liquid-liquid extraction process is presented which is capable of extracting water-soluble single-walled carbon nanotubes into an organic phase. The extraction utilizes electrostatic interactions between a common phase transfer agent and the sidewall functional groups on the nanotubes. Large length-dependent van der Waals forces for nanotubes allow the ability to control the length of nanotubes extracted into the organic phase as demonstrated by atomic force microscopy.

Bromides↗

PubMed2004

Water-in-CO2 emulsions: reaction vessels for the production of tetra-ethyl pyrone.

Water-in-CO2 (W/C) emulsions formed using a nickel Triton X-100 surfactant complex (Ni-surfactant) were used as microreactors for the carbon-carbon coupling reaction between hex-3-yne and CO2 to produce tetra-ethyl pyrone (TEP). The structure of the product, which was isolated in the CO2 phase, was determined using gas chromatography mass spectrometry (GC-MS) and infrared spectroscopy. The Ni-surfactant acted as both an emulsion forming agent and a water soluble catalyst for this carbon-carbon coupling reaction. The optimum yield of TEP was determined to be 69% after 72 h, at a temperature of 70 degrees C and a pressure of 206 bar. The ease with which the emulsion could be collapsed allowed the facile separation of products from the catalyst and any unreacted starting material. Product selectivity in the W/C emulsions was found to be greater than that obtained using conventional organic methodologies.

Journal Article↗

PubMed2003

Supercritical fluid synthesis of metal and semiconductor nanomaterials.

In the near future physical and economic constraints are expected to limit the continued miniaturisation of electronic and optical devices using current "top-down" lithography-based methods. Consequently, nonlithographic methods for synthesising and organising materials on the nanometre scale are required. In response to these technological needs a number of research groups are developing new supercritical fluids methodologies to synthesise and self-assemble "building blocks" of nanomaterials, from the "bottom-up", into structurally complex device architectures. This concept paper highlights some of the recent advances in the synthesis of metal and semiconductor nanoparticles and nanowires by using supercritical fluids. In addition, we describe an efficient supercritical fluid approach for constructing ordered arrays of metal and semiconductor nanowires within mesoporous silica templates.

Journal Article↗