Search PubMed⌕ Search

Biomedical subjects

Kai Qi

Publications and source records attributed to Kai Qi.

8 recordsLinked to original sources
PubMed2006

Tandem synthesis of core-shell brush copolymers and their transformation to peripherally cross-linked and hollowed nanostructures.

Core-shell brush copolymers were prepared on the basis of a tandem synthetic strategy and used as single molecular templates for the preparation of polymeric nanomaterials. An alkoxyamine-functionalized norbornene monomer was prepared and then polymerized by ring-opening metathesis polymerization. The well-defined polymer (Mn = 122 kDa, Mw/Mn = 1.13) contained one alkoxyamine functionality per repeat unit and was then used as a polyfunctional macroinitiator for sequential nitroxide-mediated radical polymerizations of isoprene and tert-butyl acrylate. The resulting well-defined brush copolymer (Mn = 1410 kDa, Mw/Mn = 1.23) was transformed to an amphiphilic core-shell brush copolymer comprising poly(isoprene)-b-poly(acrylic acid) grafts by hydrolysis. Subsequent cross-linking of the poly(acrylic acid) block segments afforded peripherally cross-linked brush copolymer nanostructures, which served, finally, as templates for hollowed nanoscale frameworks by ozonolysis of the poly(isoprene)-based cores. Each transformation led to dramatic changes in the nanoscale composition and structure which were detected by combinations of spectroscopic measurements, atomic force microscopy imaging in the solid state, and/or dynamic light-scattering characterization in aqueous solution.

Journal Article↗
PubMed2006

With a grain of salt: what halite has to offer to discussions on the origin of life.

This experimental study investigated how the dynamics of the crystallization of the evaporite mineral halite could affect the accumulation and preservation of organic macromolecules present in the crystallizing solution. Halite was grown under controlled conditions in the presence of polymer nanoparticles that acted as an analog to protocellular material. Optical microscopy, atomic force microscopy, and laser scanning confocal fluorescence microscopy were used to trace the localization of the nanoparticles during and after growth of halite crystals. The present study revealed that the organic nanoparticles were not regularly incorporated within the halite, but were very concentrated on its surfaces. Their distribution was controlled dominantly by the morphologic surface features of the mineral rather than by specific molecular interactions with an atomic plane of the mineral. This means that the distribution of organic molecules was controlled by surfaces like those of halite's evaporitic growth forms. The experiments with halite also demonstrated that a mineral need not continuously incorporate organic molecules during its crystallization to preserve those molecules: After rejection by (non-incorporation into) the crystallizing halite, the organic nanoparticles increased in concentration in the evaporating brine. They ultimately either adsorbed in rectilinear patterns onto the hopper-enhanced surfaces and along discontinuities within the crystals, or they were encapsulated within fluid inclusions. Of additional importance in origin-of-life considerations is the fact that halite in the natural environment rapidly can change its role from that of a protective repository (in the absence of water) to that of a source of organic particles (as soon as water is present) when the mineral dissolves.

Crystallization↗
PubMed2005

Disk morphology and disk-to-cylinder tunability of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene triblock copolymer solution-state assemblies.

Disk and cylindrical micellar assemblies were formed through self-organization of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene (PAA-b-PMA-b-PS) amphiphilic triblock copolymers with organic diamines as counterions in water/ tetrahydrofuran (THF) solvent mixtures. The system was investigated by means of transmission electron microscopy and cryogenic transmission electron microscopy. It was found that the assembled-state morphologies could be modified by alteration of the type and concentration of cationic diamine counterion undergoing interaction with the negatively charged, polyelectrolyte PAA corona block, the relative amount of water in the water/THF mixture, and the hydrophobic block chain length. Multivalency of the organic amine counterion was critical for disk formation. It was further demonstrated that a single block copolymer underwent disc-to-cylindrical micellar transitions reversibly with variation in the relative water/THF ratio. The ability to form disks beginning from either THF-rich or water-rich solutions indicated that the disk morphology was thermodynamically stable and that THF was important in keeping the micellar structure from becoming kinetically frozen. The nanoassemblies were produced having low size dispersities and were stable for at least one month. Intermediate structures between disks and cylinders were also observed, indicating two distinct kinetic pathways between the two micelle structures.

Journal Article↗
PubMed2005

Unique toroidal morphology from composition and sequence control of triblock copolymers.

The mechanism by which the unique toroidal supramolecular assemblies were formed for triblock copolymers of acrylic acid (AA), methyl acrylate (MA), and styrene (S), PAA99-b-PMA73-b-PS66, was probed in this study by investigating the influences of the block copolymer compositions and sequences. Two triblock copolymers, PAA99-b-PMA73-b-PS66 and PAA99-b-PS76-b-PMA62, and two diblock copolymers, PAA99-b-PMA155 and PAA99-b-PS133, were studied under experimental solution-state conditions that involved a range of solvent/nonsolvent (tetrahydrofuran/water) compositions, each in the presence of 2,2'-(ethylenedioxy)bis(ethylamine). The resulting morphologies were determined by transmission electron microscopy. The failures to afford toroidal supramolecular assemblies from both diblock copolymers having comparable lengths of the total hydrophobic chain segment, either entirely PMA or entirely PS, and from the triblock copolymer having a reversed connection sequence for the hydrophobic (PMA and PS) segments demonstrate the unique self-assembly behaviors of triblock copolymers and the importance of the block copolymer sequence.

Acrylic Resins↗
PubMed2005

64Cu-labeled folate-conjugated shell cross-linked nanoparticles for tumor imaging and radiotherapy: synthesis, radiolabeling, and biologic evaluation.

UNLABELLED: Long-circulating nanoparticles functionalized with ligands for receptors overexpressed by tumor cells have promising applications for active and passive tumor targeting. The purpose of this study was to evaluate 64Cu-radiolabeled folate-conjugated shell cross-linked nanoparticles (SCKs) as candidate agents to shuttle radionuclides and drugs into tumors overexpressing the folate receptor (FR). METHODS: SCKs were obtained by cross-linking the shell of micelles obtained from amphiphilic diblock copolymers. SCKs were then functionalized with folate, fluorescein thiosemicarbazide (FTSC), and 1,4,8,11-tetraazacyclotetradecane-N,N',N'',N'''-tetraacetic acid (TETA). The specific interaction of SCK-folate with the FR was investigated on KB cells. The biodistributions of 64Cu-TETA-SCK and 64Cu-TETA-SCK-folate were evaluated in athymic mice bearing small-size KB cell xenografts (10-100 mg), whereas the intratumor distributions were investigated by autoradiography in 0.3- to 0.6-g KB cell xenografts. RESULTS: A global solution-state functionalization strategy has been introduced for attaching optimum numbers of targeting and imaging agents onto the SCKs for increasing the efficiency of interaction with cell-surface receptors. Epifluorescence microscopy confirmed the specific interaction of FTSC-SCK-folate with the FR in vitro. 64Cu labeling of TETA-SCKs led to the radiolabeled compounds with 15%-20% yield and >95% radiochemical purity. The biodistribution results demonstrated high accumulation of 64Cu-labeled SCKs in organs of the reticuloendothelial system (RES) (56.0 +/- 7.1 %ID/g and 45.7 +/- 3.5 %ID/g [percentage injected dose per gram] in liver at 10 min after injection for folated and nonfolated SCKs, respectively) and a prolonged blood circulation. No increase of SCK tumor uptake deriving from folate conjugation was observed (5.9 +/- 2.8 %ID/g and 6.0 +/- 1.9 %ID/g at 4 h after injection for folated and nonfolated SCKs, respectively). However, tumor accumulation was higher in small-size tumors, where competitive block of SCK-folate uptake with excess folate was observed. Autoradiography results confirmed the extravasation of radiolabeled SCKs in vascularized areas of the tumor, whereas no diffusion was observed in necrotic regions. CONCLUSION: Despite high RES uptake, the evaluated 64Cu-labeled SCKs exhibited long circulation in blood and were able to passively accumulate in tumors. Furthermore, SCK-folate uptake was competitively blocked by excess folate in small-size solid tumors, suggesting interaction with the FR. For these reasons, functionalized SCKs are promising drug-delivery agents for imaging and therapy of early-stage solid tumors.

Animals↗
PubMed2004

Toroidal triblock copolymer assemblies.

A stable phase of toroidal, or ringlike, supramolecular assemblies was formed by combining dilute solution characteristics critical for both bundling of like-charged biopolymers and block copolymer micelle formation. The key to toroid versus classic cylinder micelle formation is the interaction of the negatively charged hydrophilic block of an amphiphilic triblock copolymer with a positively charged divalent organic counterion. This produces a self-attraction of cylindrical micelles that leads to toroid formation, a mechanism akin to the toroidal bundling of semiflexible charged biopolymers such as DNA. The toroids can be kinetically trapped or chemically cross-linked. Insight into the mechanism of toroid formation can be gained by observation of intermediate structures kinetically trapped during film casting.

Acrylates↗
PubMed2004

Determination of the bioavailability of biotin conjugated onto shell cross-linked (SCK) nanoparticles.

Shell cross-linked nanoparticles (SCKs) presenting surface- and bioavailable biotin functional groups were synthesized via a mixed micelle methodology, whereby co-micellization of chain terminal biotinylated poly(acrylic acid)-b-poly(methyl acrylate) (PAA-b-PMA) and nonbiotinylated PAA-b-PMA were cross-linked in an intramicellar fashion within the shell layer of the mixed micelles, between the carboxylic acid groups of PAA and the amine functionalities of 2,2'-(ethylenedioxy)diethylamine. The hydrodynamic diameters (D(h)) of the micelles and the SCKs with different biotinylated block copolymer contents were determined by dynamic light scattering (DLS), and the dimensions of the SCKs were characterized with tapping-mode atomic force microscopy (AFM) and transmission electron microscopy (TEM). The amount of surface-available biotin was tuned by varying the stoichiometric ratio of the biotinylated PAA-b-PMA versus the nonbiotinylated PAA-b-PMA, as demonstrated with solution-state, binding interaction analyses, an avidin/HABA (avidin/4'-hydroxyazobenzene-2-carboxylic acid) competitive binding assay, and fluorescence correlation spectroscopy (FCS). The avidin/HABA assay found the amount of available biotin at the surface of the biotinylated SCK nanoparticles to increase with increasing biotin-terminated block copolymer incorporation, but to be less than 25% of the theoretical value. FCS measurements showed the same trend.

Acrylates↗