Search PubMed⌕ Search

Biomedical subjects

K S Wilson

Publications and source records attributed to K S Wilson.

At least 127 records · Page 7Linked to original sources
PubMed1996

Structure determination and refinement of the Humicola insolens endoglucanase V at 1.5 A resolution.

The structure of the catalytic core of the endoglucanase V (EGV) from Humicola insolens has been determined by the method of multiple isomorphous replacement at 1.5 A resolution. The final model, refined with X-PLOR and PROLSQ, has a crystallographic R factor of 0.163 (R(free) = 0.240) with deviations from stereochemical target values of 0.012 A and 0.037 degrees for bonds and angles, respectively. The model was further refined with SHELXL, including anisotropic modelling of the protein-atom temperature factors, to give a final model with an R factor of 0.105 and an R(free) of 0.154. The initial isomorphous replacement electron-density map was poor and uninterpretable but was improved by the use of synchrotron data collected at a wavelength chosen so as to optimize the f" contribution of the anomalous scattering from the heavy atoms. The structure of H. insolens EGV consists of a six-stranded beta-barrel domain, similar to that found in a family of plant defence proteins, linked by a number of disulfide-bonded loop regions. A long open groove runs across the surface of the enzyme either side of which lie the catalytic aspartate residues. The 9 A separation of the catalytic carboxylate groups is consistent with the observation that EGV catalyzes the hydrolysis of the cellulose, beta(1-->4) links with inversion of configuration at the anomeric C1 atom. This structure is the first representative from the glycosyl hydrolase family 45.

Journal Article↗
PubMed1996

Structure of a ternary complex of proteinase K, mercury, and a substrate-analogue hexa-peptide at 2.2 A resolution.

The crystal structure of a ternary complex of proteinase K, Hg(II) and a hexapeptide N-Ac-Pro-Ala-Pro-Phe-Pro-Ala-NH2 has been determined at 2.2 A resolution and refined to an R factor of 0.172 for 12,910 reflections. The mercury atom occupies two alternate sites, each of which was assigned an occupancy of 0.45. These two sites are bridged by Cys-73 S gamma which forms covalent bonds to both. Both mercury sites form regular polyhedrons involving atoms from residues Asp-39, His-69, Cys-73, His-72, Met-225, and Wat-324. The complex formation with mercury seems to disturb the stereochemistry of the residues of the catalytic triad Asp-39, His-69, and Ser-224 appreciably, thus reducing the enzymatic activity of proteinase K to 15%. The electron density in the difference Fourier map shows that the hexapeptide occupies the S1 subsite predominantly and the standard recognition site constituted by Ser-132 to Gly-136 and Gly-100 to Tyr-104 segments is virtually empty. The hexapeptide is held firmly through a series of hydrogen bonds involving protein atoms and water molecules. As a result of complex formation, Asp-39, His-69, Met-225, Ile-220, Ser-219, Thr-223, and Ser-224 residues move appreciably to accommodate the mercury atoms and the hexapeptide. The largest movement is observed for Met-225 which is involved in multiple interactions with both mercury and the hexapeptide. The activity results indicate an inhibition rate of 95%, as a result of the combined effect of mercury and hexapeptide.

Amides↗
PubMed1996

Structure and dynamics of the DNA binding protein HU from Bacillus stearothermophilus by NMR spectroscopy.

The DNA-binding protein HU from Bacillus stearothermophilus (HUBst) is a dimer with a molecular weight of 195 kDa that is capable of bending DNA. An x-ray structure has been determined previously [Tanaka et al. 1984) Nature, vol. 310, pp. 376-381], but no structure could be established for a large part of the supposed DNA-binding beta-arms. Distance geometry and restrained molecular dynamics using nmr restraints were used to generate a set of 25 structures. These structures display a backbone rms deviation (RMSD) of 0.36 A for the well-defined region (residues 2-54 and 75-90). The structure of the core is very similar to that observed in the x-ray structure, with a pairwise RMSD of 1.06 A. The structure of the beta-hairpin arm contains a double flip-over at the prolines in the two strands of the beta-arm. Heteronuclear 15N relaxation measurements indicate that the beta-arm and the tip of the beta-arm is flexible. This explains the disorder observed in the solution and x-ray structures of the beta-arm with respect to the core of the protein. Overlayed onto itself the beta-arm is better defined, with a backbone RMSD of 1.0 A calculated for residues 54-59 and 69-74. The tip of the arm adopts a well-defined 4 : 6 beta-hairpin conformation. Changes in amide 15N and 1H chemical shifts upon titrating DNA are most pronounced for the residues in the beta-hairpin arm and for the residues in the second half of the third alpha-helix. Heteronuclear 15N relaxation data for free and complexed HUBst show that that the arms become structured upon DNA binding. Together with chemically induced nuclear polarization measurements on a mutant HUBst (M69Y; V76Y) this shows that the beta-hairpin arm is involved in direct DNA interaction.

Bacterial Proteins↗
PubMed1996

Crystal structure of the 2[4Fe-4S] ferredoxin from Chromatium vinosum: evolutionary and mechanistic inferences for [3/4Fe-4S] ferredoxins.

The crystal structure of the 2[4Fe-4S] ferredoxin from Chromatium vinosum has been solved by molecular replacement using data recorded with synchrotron radiation. The crystals were hexagonal prisms that showed a strong tendency to develop into long tubes. The hexagonal prisms diffracted to 2.1 A resolution at best, and a structural model for C. vinosum ferredoxin has been built with a final R of 19.2%. The N-terminal domain coordinates the two [4Fe-4S] clusters in a fold that is almost identical to that of other known ferredoxins. However, the structure has two unique features. One is a six-residue insertion between two ligands of one cluster forming a two-turn external loop; this short loop changes the conformation of the Cys 40 ligand compared to other ferredoxins and hampers the building of one NH...S H-bond to one of the inorganic sulfurs. The other remarkable structural element is a 3.5-turn alpha-helix at the C-terminus that covers one side of the same cluster and is linked to the cluster-binding domain by a six-residue external chain segment. The charge distribution is highly asymmetric over the molecule. The structure of C. vinosum ferredoxin strongly suggests divergent evolution for bacterial [3/4Fe-4S] ferredoxins from a common ancestral cluster-binding core. The unexpected slow intramolecular electron transfer rate between the clusters in C. vinosum ferredoxin, compared to other similar proteins, may be attributed to the unusual electronic properties of one of the clusters arising from localized changes in its vicinity rather than to a global structural rearrangement.

Amino Acid Sequence↗
PubMed1996

Crystal structures of the alkaline proteases savinase and esperase from Bacillus lentus.

Savinase and Esperase (EC. 3.4.21.14) are secreted by the alkalophilic bacterium Bacillus lentus and are representatives of that subgroup of subtilisin enzymes with maximum stability in the range of pH 7 to 10 and high activity in the range of pH 8 to 12. The crystal structures of native Savinase and diisopropyl fluorophosphate (DFP) inhibited Esperase have been refined using X-ray data to 1.4 angstroms and 1.8 angstroms resolution respectively collected with synchrotron radiation. The structures were refined to R-factors (=(Sigma//Fo/-/Fc//)/(Sigma/Fo/)) of 16.4% for Esperase and 17.3% for Savinase. The sequence identity between the two enzymes is 66%. The structures are very similar to those of other Bacillus subtilisins. There are two calcium ions in each, equivalent to the strong and the weak sites in subtilisins Carlsberg and BPN'. The structures show novel features which can to some extent be related to their stability and activity. The large number of salt bridges in Esperase and Savinase is likely to contribute to the high thermal stability. Non-conservative substitutions and deletions in the hydrophobic binding pocket S1 as well as the more hydrophobic character of the substrate binding region probably contribute to the alkaline activity profile of the enzymes. Towards the end of the binding site there is an extra proline, Pro131, in Savinase near proline 129, forming a cluster that provides extra active-site rigidity compared with other subtilisins. On the other side of the active site of Esperase and Savinase, the tyrosine found in most other subtilisins is replaced by leucine and valine respectively. The tyrosine potentially interacts with substrate residue P6. At high pH, the negatively charged deprotonated tyrosine could interact unfavorably with the substrate, a possibility that is overcome by substitution with a neutral residue. This is probably one explanation for the shift of the activity profile of Esperase and Savinase to more alkaline pH.

Alkalies↗
PubMed1996

Bacterial chitobiase structure provides insight into catalytic mechanism and the basis of Tay-Sachs disease.

Chitin, the second most abundant polysaccharide on earth, is degraded by chitinases and chitobiases. The structure of Serratia marcescens chitobiase has been refined at 1.9 A resolution. The mature protein is folded into four domains and its active site is situated at the C-terminal end of the central (beta alpha)8-barrel. Based on the structure of the complex with the substrate disaccharide chitobiose, we propose an acid-base reaction mechanism, in which only one protein carboxylate acts as catalytic acid, while the nucleophile is the polar acetamido group of the sugar in a substrate-assisted reaction. The structural data lead to the hypothesis that the reaction proceeds with retention of anomeric configuration. The structure allows us to model the catalytic domain of the homologous hexosaminidases to give a structural rationale to pathogenic mutations that underlie Tay-Sachs and Sandhoff disease.

Acetylglucosaminidase↗
PubMed1996

Purification and crystals of tyrosine phenol-lyase from Erwinia herbicola.

New method of purification of tyrosine phenol-lyase from Erwinia herbicola has been developed. The enzyme obtained is homogeneous and characterised by a specific activity which is three times higher then that described earlier. Crystals of holoenzyme complexed with monovalent cations have been grown from NaCl, KCl and (NH4)2SO4 containing solutions. The crystals belong to P6(2)22 space group. They are stable to the X-ray radiation and diffract up to 2.6-3.1 A. Asymmetric unit contains one subunit of tetrameric molecule.

Crystallization↗
PubMed1995

Solution structure of the HU protein from Bacillus stearothermophilus.

The histone-like protein HU from Bacillus stearothermophilus is a dimer with a molecular mass of 19.5 kDa that is capable of bending DNA. An X-ray structure has been determined, but no structure could be established for a large part of the supposed DNA-binding beta-arms. Using distance and dihedral constraints derived from triple-resonance NMR data of a 13C/15N doubly-labelled HU protein 49 distance geometry structures were calculated, which were refined by means of restrained Molecular Dynamics. From this set a total of 25 refined structures were selected having low constraint energy and few constraint violations. The ensemble of 25 structures display a root-mea-square co-ordinate deviation of 0.36 A with respect to the average structure, calculated over the backbone heavy atoms of residues 2 to 54 and 75 to 90 (and residues 2' to 54' and 75' to 90' of the second monomer). The structure of the core is very similar to that observed in the X-ray structure, with a pairwise r.m.s.d. of 1.06 A. The structure of the beta-hairpin arm contains a double flip-over at the prolines in the two strands of the beta-arm. Strong 15N-NH heteronuclear nuclear Overhauser effects indicate that the beta-arm and especially the tip is flexible. This explains the disorder observed in the solution and X-ray structures of the beta-arm, in respect of the core of the protein. Overlayed onto itself the beta-arm is better defined, with an r.m.s.d. of 1.0 A calculated over the backbone heavy atoms of residues 54 to 59 and 69 to 74. The tip of the arm adopts a well-defined 4:6 beta-hairpin conformation similar to the iron co-ordinating beta-arms of rubredoxin.

Bacterial Proteins↗
PubMed1995

Ab initio determination of the crystal structure of cytochrome c6 and comparison with plastocyanin.

BACKGROUND: Electron transfer between cytochrome f and photosystem I (PSI) can be accomplished by the heme-containing protein cytochrome c6 or by the copper-containing protein plastocyanin. Higher plants use plastocyanin as the only electron donor to PSI, whereas most green algae and cyanobacteria can use either, with similar kinetics, depending on the copper concentration in the culture medium. RESULTS: We report here the determination of the structure of cytochrome c6 from the green alga Monoraphidium braunii. Synchrotron X-ray data with an effective resolution of 1.2 A and the presence of one iron and three sulfur atoms enabled, possibly for the first time, the determination of an unknown protein structure by ab initio methods. Anisotropic refinement was accompanied by a decrease in the 'free' R value of over 7% the anisotropic motion is concentrated at the termini and between residues 38 and 53. The heme geometry is in very good agreement with a new set of heme distances derived from the structures of small molecules. This is probably the most precise structure of a heme protein to date. CONCLUSIONS: On the basis of this cytochrome c6 structure, we have calculated potential electron transfer pathways and made comparisons with similar analyses for plastocyanin. Electron transfer between the copper redox center of plastocyanin to PSI and from cytochrome f is believed to involve two sites on the protein. In contrast, cytochrome c6 may well use just one electron transfer site, close to the heme unit, in its corresponding reactions with the same two redox partners.

Chlorophyta↗
PubMed1995

Transcription termination at intrinsic terminators: the role of the RNA hairpin.

Intrinsic termination of transcription in Escherichia coli involves the formation of an RNA hairpin in the nascent RNA. This hairpin plays a central role in the release of the transcript and polymerase at intrinsic termination sites on the DNA template. We have created variants of the lambda tR2 terminator hairpin and examined the relationship between the structure and stability of this hairpin and the template positions and efficiencies of termination. The results were used to test the simple nucleic acid destabilization model of Yager and von Hippel and showed that this model must be modified to provide a distinct role for the rU-rich sequence in the nascent RNA, since a perfect palindromic sequence that is sufficiently long to form an RNA hairpin that could destabilize the entire putative 12-bp RNA-DNA hybrid does not trigger termination at the expected positions. Rather, our results show that both a stable terminator hairpin and the run of 6-8 rU residues that immediately follows are required for effective intrinsic termination and that termination occurs at specific and invariant template positions relative to these two components. Possible structural or kinetic modifications of the simple model are proposed in the light of these findings and of recent results implicating "inchworming" and possible conformational heterogeneity of transcription complexes in intrinsic termination. Thus, these findings argue that the structure and dimensions of the hairpin are important determinants of the termination-elongation decision and suggest that a complete mechanism is likely to involve specific interactions of the polymerase, the RNA terminator hairpin, and, perhaps, the dT-rich template sequence that codes for the run of rU residues at the 3' end of the nascent transcript.

Bacterial Proteins↗
PubMed1995

Refined structure of Cu-substituted alcohol dehydrogenase at 2.1 A resolution.

Liver alcohol dehydrogenase (LADH) is a Zn(II)-dependent dimeric enzyme. LADH with the active-site Zn(II) substituted by Cu(II) resembles blue (type I) copper proteins by its spectroscopic characteristics. In this work we present the X-ray structure of the active site Cu(II)-substituted LADH complex with NADH and dimethyl sulfoxide (DMSO). The structure was solved by molecular replacement. The space group is P2(1) with cell dimensions a = 44.4, b = 180.6, c = 50.8 A and beta = 108 degrees. There is one dimer of the enzyme in the asymmetric unit. The refinement was carried out to a crystallographic R-factor of 16.1% for 41 119 unique reflections in the resolution range 12.0 to 2.1 A. The coordination geometry of Cu(II) in LADH is compared with the active-site metal coordination in the Zn-LADH-NADH-DMSO complex and blue-copper proteins. The distances from the metal to the protein ligands (Cys46, His67 and Cys174) are similar for the Zn(II) and Cu(II) ions. The distances of the O atom of the inhibitor DMSO to the Cu(II) ion in the two subunits of the dimer are 3.19 and 3.45 A. These are considerably longer than the corresponding distances for the Zn(II) enzyme, 2.19 and 2.15 A. The Cu(II) ion is positioned nearly in the plane of the three protein ligands (NS(2)) with a geometry similar to the trigonal arrangement of the three strongly bound ligands (N(2)S) in blue-copper proteins. This coordination probably accounts for the similarity of the spectral characteristics of Cu(II)-LADH and type I copper proteins.

Journal Article↗
PubMed1995

Crystal structure of reduced bovine erythrocyte superoxide dismutase at 1.9 A resolution.

Cu,Zn superoxide dismutase was investigated crystallographically in the reduced form. Co-ordinate errors were estimated by comparing two independently refined models, based on two different data sets. This gave a detailed error estimation as opposed to the standard sigma A and Luzzati plots, which estimate only the overall error. The high quality of the final model, obtained after scaling together the two data sets, combined with the error estimates allowed a detailed analysis of the protein and solvent structures. An automatic procedure for building and refining solvent structure was tested and found to give reproducible results. Contrary to results obtained from spectroscopic studies, the co-ordination of the metal ions in the catalytic site is preserved in the crystal structure of the reduced enzyme, as compared with the crystal structure of the oxidised form. Analysis of the solvent reveals a well-defined chain of closely packed, hydrogen-bonded water molecules filling the active site groove. This structural feature could serve as a hydrogen bond relay for efficient delivery of protons to the active centre. Analysis of electron density suggests that Glu119 is covalently modified. The modification, if originated in vivo, could have a role in the catalytic mechanism and could affect the overall electrostatic field in the active site. There are significant differences between the active sites of the two crystallographically independent monomers. They are explained in terms of local differences in the crystal environment.

Amino Acid Sequence↗
PubMed1995

The structure of trp RNA-binding attenuation protein.

The crystal structure of the trp RNA-binding attenuation protein of Bacclius subtilis solved at 1.8 A resolution reveals a novel structural arrangement in which the eleven subunits are stabilized through eleven intersubunit beta-sheets to form a beta-wheel with a large central hole. The nature of the binding of L-tryptophan in clefts between adjacent beta-sheets in the beta-wheel suggests that this binding induces conformational changes in the flexible residues 25-33 and 49-52. It is argued that upon binding, the messenger RNA target forms a matching circle in which eleven U/GAG repeats are bound to the surface of the protein ondecamer modified by the binding of L-tryptophan.

Amino Acid Sequence↗
PubMed1995

Crystal structure of the closed form of chicken cytosolic aspartate aminotransferase at 1.9 A resolution.

The crystal structure of chicken cytosolic aspartate aminotransferase (cAATase; EC 2.6.1.1) has been solved and refined at 1.9 A resolution. Orthorhombic crystals, space group P2(1)2(1)2(1), a = 56.4 A, b = 126.0 A and c = 142.3 A, were grown from polyethylene glycol solutions in the presence of maleate, a dicarboxylic inhibitor that forms a Michaelis-like complex. The pyridoxal form of the enzyme was used for crystallization. Diffraction data were collected using synchrotron radiation. The structure of the new orthorhombic crystal form was solved by molecular replacement using the partially refined 2.8 A resolution structure of the high-salt crystal form as a search model. The final value of the crystallographic R-factor after rigid body and restrained least-squares refinement is 0.175 with very good model geometry. The two 2-fold-related subunits of cAATase have distinct environments in the crystal lattice. Domain movement is strictly hindered by the lattice contacts in one subunit, while the second one possesses conformational freedom. Despite their different environments, both subunits were found in the closed conformation with one maleate molecule tightly bound in each active site. The present study allows a detailed comparison of the highly refined structures of the aspartate aminotransferase isozymes, and thus provide better insight into the role of conserved and variable residues in substrate recognition and catalysis.

Animals↗
PubMed1995

Crystal structure of narbonin at 1.8 A resolution.

The three-dimensional structure of narbonin, a seed protein from Vicia narbonensis L, has been determined at 1.8 A resolution. Phase information was obtained by multiple isomorphous replacement and optimized anomalous dispersion. The narbonin structure was initially traced with only 17% amino-acid sequence information and preliminarily refined to a crystallographic R-factor of 16.5%. It is now refined to 15.9% using full sequence information derived from cDNA and after the addition of more solvent molecules. The monomeric molecule of narbonin is an eight-stranded parallel beta-barrel surrounded by alpha-helices in a beta/alpha-topology similar to that first observed in triose phosphate isomerase. Differences exist in the N-terminal part of the polypeptide chain, where the first helix is replaced by a loop and the second beta-strand is followed by an additional antiparallel alpha-sheet placed parallel on top of alpha-helices alpha3 and alpha4. Two short additional secondary structures are present. The first, an alpha-helix, is situated between the seventh beta-strand and the following helix, and the second, which is a 3(10) helix, between the eighth strand and the C-terminal helix. The most striking observation is the lack of a known enzymatic function for narbonin, because all TIM-like structures known so far are enzymes.

Journal Article↗
PubMed1995

Structure of octreotide, a somatostatin analogue.

Octreotide, a synthetic somatostatin analogue, is an octapeptide with one disulfide bridge. Crystals of octreotide are orthorhombic, space group P2(1)2(1)2(1), a = 18.458 (5), b = 30.009 (7), c = 39.705 (27) A, with three molecules of octapeptide, one ordered oxalate dianion and 52 water molecules in the asymmetric unit. Complete protonation of the NH(2) groups (as assumed in the refinement) would require three oxalate dianions in the asymmetric unit for charge neutrality; a chemical analysis indicated that four are present. In either case they are so disordered that they cannot be distinguished from the water molecules. The 18 951 unique reflections (R(sym) = 0.026) used for structure solution and refinement were recorded with the EMBL imaging-plate scanner using synchrotron radiation. The structure was solved by Patterson interpretation, locating the three disulfide bridges, followed by tangent phase expansion and E-Fourier recycling. The anisotropic refinement against all F(2) data between 1.04 and 10.0 A resolution by blocked restrained full-matrix least-squares techniques converged to a conventional R index based on F of 0.084 [I > 2a(I) and 10.0 > d > 1.04 A] and wR2, the weighted R-index on F(2), of 0.246 (for all data). One peptide molecule adopts a flat beta-sheet structure; the other two possess different irregular backbone conformations, but are similar to each other. All three molecules have a distorted type II' beta-turn around the D-Trp-Lys region, but exhibit different side-chain conformations. The crystal structure is stabilized by a network of inter- and intramolecular hydrogen bonds.

Journal Article↗
PubMed1995

Comparison of different X-ray data-collection systems using the crystal structure of octreotide.

The octapeptide octreotide crystallizes with three peptide molecules and about 20% water in the asymmetric unit, and in many ways possesses diffraction properties similar to those of a 'mini-protein' consisting of 24 amino-acid residues. It diffracts to about 1.0 A but data in the range 1.4-1.0 A are weak. It provides a suitable test of different macromolecular X-ray data-collection techniques, especially of their ability to measure weak reflections accurately. In contrast to typical proteins it is possible to perform a full anisotropic refinement, that we believe provides a more objective test of the quality of the data than the internal consistency of equivalent reflections. We have collected a total of six data sets. The X-ray sources included synchrotron radiation, Cu Kalpha rotating anodes and Mo Kalpha sealed tubes; position-sensitive two-dimensional detectors from four manufacturers and a four-circle diffractometer with scintillation counter were employed. Two of the six data sets were collected at low temperature. Reasonable anisotropic refinement was possible with all area-detector data sets, although significant differences in the precision of the final model were observed. In addition we tested the ability of automated Patterson interpretation to solve the structure using the six independent data sets. The structure solution was only successful using the synchrotron or rotating-anode data sets, i.e. for the more intense sources. It appears that for structure solution the maximum resolution of the data is critical, whereas for refinement the accuracy of the data is more important.

Journal Article↗