Biomedical subjects

K J Zhu

Publications and source records attributed to K J Zhu.

At least 19 recordsLinked to original sources

PubMed2005

Preparation, characterization and nasal delivery of alpha-cobrotoxin-loaded poly(lactide-co-glycolide)/polyanhydride microspheres.

In this study, alpha-cobrotoxin was incorporated into the microspheres composed of poly(lactide-co-glycolide) (PLGA) and poly[1,3-bis(p-carboxy-phenoxy) propane-co-p-(carboxyethylformamido) benzoic anhydride] (P(CPP:CEFB)) and intranasally delivered to model rats in order to improve its analgesic activity. The microspheres with high entrapment efficiency (>80%) and average diameter of about 25 microm could be prepared by a modified water-in-oil-in-oil (w/o/o) emulsion solvent evaporation method. Scanning electron micrograph (SEM) study indicated that P(CPP:CEFB) content played a considerable role on the morphology and degradation of the microspheres. The presence of P(CPP:CEFB) in the microspheres increased their residence time at the surface of the nasal rat mucosa. The toxicity of the composite microspheres to nasal mucosa was proved to be mild and reversible. A tail flick assay was used to evaluate the antinociceptive activity of the microspheres after nasal administration. Compared with the free alpha-cobrotoxin and PLGA microspheres, PLGA/P(CPP:CEFB) microspheres showed an apparent increase in the strength and duration of the antinociceptive effect at the same dose of alpha-cobrotoxin (80 microg/kg body weight).

Administration, Intranasal↗

PubMed2005

In vitro and in vivo studies of cyclosporin A-loaded microspheres based on copolymers of lactide and epsilon-caprolactone: comparison with conventional PLGA microspheres.

A hydrophobic peptide, cyclosporin A (CyA), was incorporated in microspheres based on poly(lactide-b-epsilon-caprolactone) (P(LA-b-CL), LA/CL (in molar ratio): 78.7/21.3 and 48.1/51.9) and poly(lactide-co-glycolide) (PLGA, LA/GA: 80/20) using oil-in-water (O/W) emulsion solvent evaporation method. The microspheres were characterized by SEM, DSC and X-ray diffraction, and CyA release rate was determined by HPLC. It was revealed that CyA can be efficiently loaded into all the microspheres (exceed 96%). Compared to PLGA microspheres, P(LA-b-CL) microspheres liberated CyA more rapidly. Within the first day, about 75, 50 and 12% of CyA released from P(LA-b-CL) (48.1/51.9), P(LA-b-CL) (78.7/21.3) and PLGA microspheres, respectively, which can be attributed to the partial crystallization occurring in P(LA-b-CL) microspheres. CyA levels in whole blood were also tested. In comparison with PLGA microspheres, P(LA-b-CL) microspheres provided a higher blood level of CyA. The maximum CyA concentration in whole blood (approximately 520, 450 and 400 ng ml(-1) for P(LA-b-CL) (48.1/51.9) P(LA-b-CL) (78.7/21.3) and PLGA microspheres, respectively) was reached at the second day post administration. And then P(LA-b-CL) microspheres showed a constant CyA level (about 100-200 ng ml(-1)) for extended periods of time (several weeks). Such CyA-loaded P(LA-b-CL) microspheres displaying higher CyA concentration during the first few days and similar constant blood CyA level thereafter showed more advantages than those prepared with PLGA and could meet clinical needs more efficiently.

Animals↗

PubMed2005

Preparation of bovine serum albumin loaded poly (D, L-lactic-co-glycolic acid) microspheres by a modified phase separation technique.

BSA-loaded mcirospheres were prepared by a modified phase separation method, in which petroleum ether (PE) containing a certain amount of Span 80 rather than poly (dimethylsiloxane) (PDMS) was adopted as coacervating agent. Process parameters such as Span 80 concentration, the volume and addition rate of coacervating agent, polymer concentration, agitation rate during the phase separation process and PE type were evaluated to optimize the protein encapsulation. It was found microspheres with high yield (>80.0%) and entrapment efficiency (>90%) could be obtained using PE containing 5.0% Span 80 as the coacervating agent. Microspheres with small particle size (<10 microm) could be produced successfully with appropriate process parameters. In vitro release study suggested that burst release was significantly influenced by Span 80 concentration, polymer concentration and PE type and the burst release could be reduced to <20% with optimized formulation. A biphasic release behavior in vitro test was observed for the microspheres prepared by this method. GC analysis demonstrated that residual solvent of DCM and petroleum ether was decreased dramatically in comparison with PDMS used as a conventional coacervating agent.

Alkanes↗

PubMed2005

Preparation, characterization and in vitro release properties of ibuprofen-loaded microspheres based on polylactide, poly(epsilon-caprolactone) and their copolymers.

In this paper, ibuprofen was encapsulated into microspheres by oil-in-water (o/w) emulsion solvent evaporation method. Biodegradable polymers with certain compositions and characteristics such as polylactide (PLA), poly(epsilon-caprolactone) (PCL) and their block copolymer were used to prepare the microspheres. The results indicate that, under the same processing conditions, the drug entrapment efficiency was similar (approximately 80%) for microspheres prepared with PLA and P(LA-b-CL) (78.7/21.3 by mole), but it was only 25.4% for PCL microspheres. The in vitro drug release rate decreased in the order of PCL, P(LA-b-CL) (78.7/21.3 by mole) and PLA microspheres. PCL microspheres showed more serious burst release during the first day (almost 80%) than P(LA-b-CL) (50%) and PLA microspheres (18%). The complete ibuprofen release duration from the last two kinds of microspheres exceeded 1 month. Characterization of the microspheres by differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and polarized optical microscope (POM) revealed that ibuprofen was amorphous in PCL microspheres and partially crystalline in P(LA-b-CL) and PLA microspheres. The different release behaviour of ibuprofen from the three kinds of microspheres could be attributed to the different crystallinity of the studied polymers and drug dispersion state in polymer matrices. All the above results suggest that the copolymer with a certain ratio of lactide to -caprolactone could have potential applications for long-term ibuprofen release.

Absorption↗

PubMed2005

Optimizing double emulsion process to decrease the burst release of protein from biodegradable polymer microspheres.

The process parameters such as the compositions of inner and outer aqueous phase and emulsification technique of the primary emulsion were optimized to decrease the burst release of BSA from biodegradable polymer microspheres in double emulsion method. It was found that diminished burst release of -14% was achieved for the microspheres produced by formulations, where no phosphate was present in the inner water phase (non-buffered system). Primary emulsion made by probe sonication rather than homogenization or mechanical stirring led to microspheres with insignificant burst effect. Microspheres obtained using 0.1% aqueous Tween 80 solution as the outer aqueous phase, frequently exhibit reduced burst effect of 2.7%. Low microsphere yield (52.1%), however, was observed. Microsphere yield was, therefore, enhanced by addition of additive such as sodium chloride, glucose or mannitol into the outer aqueous phase. Decrease in BSA entrapment was observed in the presence of sodium chloride, but reduction in entrapment efficiency was observed in the case of glucose. Burst release increased from 2.7% to 9.5% or 3.4% as 2.5% sodium chloride or 7.5% glucose was added into the outer aqueous phase respectively. Marked burst release (>20%) was observed in the presence of additive of higher concentration independent of sodium chloride or glucose. As far as surfactant type was concerned, diminished burst was found when PVP or Tween 80 rather than PVA was utilized as the surfactant during microsphere preparation. In addition to PLGA, the copolymers of L-lactide (LLA) and dimethyl trimethylene carbonate (DTC) or trimethylene carbonate (TMC) were also evaluated. Insignificant burst effect was found for the microspheres composed of DTC or TMC copolymers.

Animals↗

PubMed2004

Improvement of protein loading and modulation of protein release from poly(lactide-co-glycolide) microspheres by complexation of proteins with polyanions.

A novel method was proposed to incorporate and modulate protein release from poly(lactide-co-glycolide) (PLGA) microspheres by a modified w/o/w emulsion solvent evaporation technique with poly(methacrylic acid) (PMAA)/insulin complex suspension as the inner aqueous phase instead of the neat protein solution. It was found that a reversible, water-insoluble complex could be formed between PMAA and insulin by electrostatic interactions. A great increase in insulin entrapment efficiency was observed as the PMAA/insulin complex was adopted to prepare PLGA microspheres. A large number of the complex particles adsorbed at the surface of the microspheres, resulting in the more rapid insulin release. The complexation and microencapsulation processes have little effect on insulin bioactivity, which was revealed by examination of the plasma glucose levels of the diabetic rats administrated with the microspheres.

Animals↗

PubMed2004

An improvement of double emulsion technique for preparing bovine serum albumin-loaded PLGA microspheres.

A modified double emulsion technique was adopted to prepare bovine serum albumin (BSA) loaded poly (D,L-lactic-co-glycolic acid) (PLGA) microspheres. In the formulations, polysorbates (Tween) such as Tween20, Tween40 or Tween80, instead of frequently used poly (vinyl alcohol) (PVA), was used as the emulsifier. Microspheres with porous surface, large particle size, low microsphere yield (approximately 65.4%) and BSA entrapment efficiency (approximately 25.2%) were obtained when Tween80 aqueous solution alone was used as the outer aqueous phase. However, microspheres with smooth surface, high yield and BSA entrapment efficiency could be produced successfully by introducing sodium chloride or glucose into the outer aqueous phase. Adding 5.0%(w/v) sodium chloride into the continuous phase led to increase in microsphere yield and BSA entrapment efficiency from 65.4% and 25.2% to approximately 100% and 76.6%, respectively. Microsphere yield and BSA entrapment efficiency increased from 64.5% and 25.2% to 97.2% and 89.3%, respectively, when 15.0%,(w/v) glucose was added into the continuous phase. In constrast to the microspheres prepared in the presence of additive, a more marked burst release was observed for microspheres prepared without additive in the continuous phase, which may be attributed to the porous morphology of the latter.

Animals↗

PubMed2003

Synthesis, characterization and in vitro release of 5-aminosalicylic acid and 5-acetyl aminosalicylic acid of polyanhydride--P(CBFAS).

A novel polyanhydride, poly[(5-carboxybutyl formamide)-2-acetyl salicylic anhydride] (P(CBFAS)), with 5-aminosalicylic acid (5-ASA) incorporated into the polymer backbone was synthesized and characterized by infrared, (1)H-nuclear magnetic resonance, differential scanning calorimetry, vapor pressure osmometry, etc. The polyanhydride was subjected to degradation and simultaneously released 5-ASA and its derivative 5-acetyl aminosalicylic acid (5-acetyl ASA) in vitro under various conditions. The factors influencing the release profiles of 5-ASA and 5-acetyl ASA, including polymer molecular weights, pH value, enzyme and rat gastrointestinal contents, were examined. The results showed that the release rate of 5-ASA and 5-acetyl ASA increases with increasing pH value and with decreasing molecular weights. In PBS (pH 8.0, 37 degrees C) total ASA released was 8.0% for P(CBFAS)(1) (Mn 10770) in 13 h, but only 1.1 and 2.6% at pH 2.0 and 6.5, respectively. Enzymes including pepsin and trypsin, as well as rat gastric and jejunum contents had little effect on the release rate of 5-ASA and 5-acetyl ASA at pH 2.0 and 6.5 (less than 4% in 13 h). However, the release rate of 5-ASA and 5-acetyl ASA was much fast in PBS(pH 8.0) containing 5% of cecal contents, the total ASA released was 13.6% for the polymer in 13 h. Considering the high drug loading of the polymer (50.2% of 5-ASA moieties in the backbones) and the degradation characters, it is possible to reach high local concentration of 5-ASA in the colon site via oral administration. Therefore, P(CBFAS) may be potentially useful in the colon specific delivery of 5-ASA.

Aminosalicylic Acids↗

PubMed2003

Preparation, characterization and properties of poly(2,2-dimethyl trimethylene carbonate-co-epsilon-caprolactone)-block-poly(ethylene glycol).

Degradable terpolymers were synthesized by bulk copolymerization of 2,2-dimethyl trimethyle necarbonate (DTC), epsilon-caprolactone (CL) and poly(ethylene glycol) (PEG) using stannous octoate as catalyst at 140 degrees C for 36 h. The molar ratio in feed of DTC to CL was fixed at 20:80. The molecular weight and the mol% of PEG were varied in order to obtain copolymers with different properties. The copolymers were characterized by 1H-NMR, 13C-NMR, FT-IR, GPC and DSC. It was found that the hydrophilicity of these materials increased with increasing PEG content in the copolymers, according to the measurements of static contact angles of distilled water on the surface of polymer films. Mechanical tests and hydrolytic degradation assays showed that copolymers of different degradability and mechanical properties could be tailored by adjusting the compositions. For the copolymer T-4 (11.9 mol% of PEG with Mn 2000), the tensile strength and the elastic modulus could reach 6.2 MPa and 25 MPa, respectively. It took only 4 weeks for the copolymer T-4 to degrade to 83% (M(n,t)/M(n,0)) and 10 weeks to 63% in 0.1 M PBS at pH 7.4 and 37 degrees C. There was no obvious acceleration of degradation rate in vivo in comparison with that in vitro. These materials might be useful for nerve regeneration guides and other biomedical applications.

Biocompatible Materials↗

PubMed2002

Controlled drug release properties of ionically cross-linked chitosan beads: the influence of anion structure.

By adopting a novel chitosan cross-linked method, i.e. chitosan/gelatin droplet coagulated at low temperature and then cross-linked by anions (sulfate, citrate and tripolyphosphate (TPP)), the chitosan beads were prepared. Scanning electron microscopy (SEM) observation showed that sulfate/chitosan and citrate/chitosan beads usually had a spherical shape, smooth surface morphology and integral inside structure. Cross-sectional analysis indicated that the cross-linking process of sulfate and citrate to chitosan was much faster than that of TPP due to their smaller molecular size. But, once completely cross-linked, TPP/chitosan beads possessed much better mechanical strength and the force to break the beads was approximately ten times higher than that of sulfate/chitosan or citrate/chitosan beads. Release media pH and ionic strength seriously influenced the controlled drug release properties of the beads, which related to the strength of electrostatic interaction between anions and chitosan. Sulfate and citrate cross-linked chitosan beads swelled and even dissociated in simulated gastric fluid (SGF) and hence, model drug (riboflavin) released completely in 5 h; while in simulated intestinal fluid (SIF), beads remained in a shrinkage state and drug released slowly (release % usually <70% in 24 h). However, swelling and drug release of TPP/chitosan bead was usually insensitive to media pH. Chitosan beads, cross-linked by a combination of TPP and citrate (or sulfate) together, not only had a good shape, but also improved pH-responsive drug release properties. Salt weakened the interaction of citrate, especially sulfate with chitosan and accelerated beads swelling and hence drug release rate, but it was insensitive to that of TPP/chitosan. These results indicate that ionically cross-linked chitosan beads may be useful in stomach specific drug delivery.

Anions↗

PubMed2002

Novel fluorescent copolyanhydrides as potential visible matrices for drug delivery.

Two classes of fluorescent copolyanhydrides were synthesized by melt copolycondensation of the fluorophoric diacid, p-(carboxyethylformamido)benzoic acid (CEFB), with sebacic acid (SA) or N-trimellitylimidoglycine (TMA-gly). Alternate copolyanhydride based on SA and CEFB was also prepared by solution polycondensation of CEFB and sebacoyl chloride. 'H NMR spectra of the copolymers confirm their structures. Fluorescence was observed for all the copolymers, the intensity of which increases with the CEFB fraction. Either blue (ca. 429 nm) or green (ca. 520 nm) light can be emitted from the copolymers with the excitation of UV (356 nm) and visible (470 nm) light, respectively. The polymers were further fabricated to microsphere formulation, which can be clearly visualized by fluorescent microscopy.

Anhydrides↗

PubMed2002

The release behavior of brilliant blue from calcium-alginate gel beads coated by chitosan: the preparation method effect.

The aim of this study is to reveal how the release behavior of a model drug (brilliant blue, BB) from chitosan coating calcium-alginate gel beads (CCAGB) was influenced by the preparation methods. The CCAGB were prepared by dropping alginate solution into CaCl(2)/chitosan solution (method 1(a)), or into chitosan solution then gelled by CaCl(2) (method 1(b)), or into CaCl(2) solution then coated by chitosan (method 2). Scanning electron microscopy was used for morphology observation, and elemental analysis was applied to determine the chitosan content bound on calcium-alginate gel beads (CAGB). Compared to CAGB, the dried CCAGB had poorer shape and rougher surface morphology especially in methods 1(a) and (b); moreover, CCAGB was found to be more instable in 0.9% NaCl and serious burst of beads occurred when high concentration of alginate (3.0 and 5.0% w/v) was used. The influence on BB release from the beads by chitosan coating was not only related to the chitosan density on bead surface, but also preparation method and other factors. Under un-dried bead state in method 1(a), the increase of chitosan content prolonged BB release in 0.9% (w/v) NaCl; while in method 2, the increase of chitosan concentration over 0.1% (w/v) (3.0% (w/v) alginate concentration was used) resulted in more serious burst of beads and hence facilitated BB release. Furthermore, in both methods 1(a) and 2, the increase of alginate from 1.5 to 3.0 or 5.0% (w/v) usually resulted in the significant burst of beads and accelerated BB release when 0.3 or 0.5% (w/v) chitosan was used for coating. Drying process greatly influenced BB release profile due to the destroying of alginate-chitosan film. The acceleration of BB release from CCAGB by drying process was more significant in the case of method 1 than of method 2.

Alginates↗

PubMed2002

The influence of multivalent phosphate structure on the properties of ionically cross-linked chitosan films for controlled drug release.

The aim of this paper was to investigate the electrostatic interactions between multivalent phosphates (phosphate (Phos), pyrophosphate (Pyro) and tripolyphosphate (TPP)) and chitosan, as well as the influence of electrostatic interactions on the properties of chitosan films ionically cross-linked by the above mentioned phosphates. The charge number of Phos was too low to interact with chitosan, while Pyro and TPP with more negative charges showed a significant ability to ionically cross-link chitosan. Solution pH played an important role on the charge numbers carried by Pyro, TPP and chitosan, especially for Pyro/chitosan. For instance, at pH less than 2.0 the interaction between Pyro and chitosan disappeared, while for TPP/chitosan even in solutions at pH less than 0.5 it still existed. Media pH and ionic strength also had a significant influence on the properties of cross-linked chitosan film with multivalent phosphates. Usually these films swelled and drug was released quickly in acidic conditions (such as in simulated gastric fluid) while under neutral conditions (such as in simulated intestinal fluid) they remained in a shrinkage state and drug was released slowly. Compared to TPP/chitosan films, Pyro/chitosan films exhibited much better pH-sensitive swelling and controlled release properties due to their relatively weak electrostatic interaction. The same reasoning was used to explain the significant acceleration of Pyro/chitosan film swelling and model drug release observed on adding sodium chloride. These films may be promising for site-specific drug delivery in the stomach.

Anions↗

PubMed2001

Design of a core-shelled polymer cylinder for potential programmable drug delivery.

A cylindrical dosage form comprising a laminated composite polymer core and a hydrophobic polycarbonate coating was proposed for programmable drug delivery. In the core, poly[(ethyl glycinate) (benzyl amino acethydroxamate) phosphazene] was synthesized as drug-loaded layers for its strong pH-sensitive degradation (eroded after 1.5 days at pH 7.4 and more than 20 days at pH 5.0 and 6.0). Poly(sebacic anhydride)-b-polyethylene glycol or poly(sebacic anhydride-co-trimellitylimidoglycine)-b-poly(ethylene glycol) was selected as isolating layers for their good processing properties at room temperature and suitable erosion duration. The in vitro drug release studies of these devices were conducted under physiological conditions (pH 7.4). The results revealed that the model drugs (brilliant blue, FITC-dextran, myoglobin) could be released in typical pulsatile manner. Moreover, the duration time of drug release (24-40 h) and the lag time (18-118 h) could be separately regulated by the mass of polyphosphazene and the type or mass of polyanhydride. In this experiment, the cooperative effect of polyanhydrides and pH-sensitive degradable polyphosphazene was specially demonstrated, which offers a new idea to develop a programmable drug delivery system for single dose vaccine and other related applications.

Anhydrides↗

PubMed2001

Novel pH-sensitive citrate cross-linked chitosan film for drug controlled release.

Turbidimetric titration revealed that there were electrostatic attractive interactions between citrate and chitosan in the pH region of 4.3-7.6, depending on their degree of ionization. Citrate cross-linked chitosan film was prepared simply by dipping chitosan film into sodium citrate solution. The swelling ratio of citrate/chitosan film was sensitive to pH, ionic strength etc. Under acidic conditions, citrate/chitosan film swelled and even dissociated in the pH less than 3.5, and the model drugs (brilliant blue and riboflavin) incorporated in the film were released quickly (usually within 2 h released completely in simulated gastric fluid at 37 degrees C) while under neutral conditions the swelling ratio of citrate/chitosan film was less significant and the release rate of brilliant blue and riboflavin was low (less than 40% released in simulated intestinal fluid in 24 h). Sodium chloride weakened the electrostatic interaction between citrate and chitosan, and therefore facilitated the film swelling and accelerated drug release. The parameters of film preparation such as citrate concentration, solution pH etc. influencing the film swelling and drug release profiles were examined. The lower concentration and the higher pH of citrate solution resulted in a larger swelling ratio and quicker riboflavin release. To improve the drug controlled release properties of citrate/chitosan film, heparin, pectin and alginate were further coated on the film surface. Among them only the coating of alginate prolonged riboflavin release noticeably (for 80% of drug released the time was extended from 1.5 to 3.5 h with 0.5% w/v alginate used). The results indicated that the citrate/chitosan film was useful in drug delivery such as for the site-specific drug controlled release in stomach.

Chitin↗

PubMed2001

Synthesis, characterization and in vitro degradation of a new family of alternate poly(ester-anhydrides) based on aliphatic and aromatic diacids.

A new family of alternate poly(ester-anhydrides) containing aliphatic and aromatic diacids were synthesized. The dicarboxylic acids were obtained by derivatization of p-hydroxy benzoic acid at the hydroxy terminus with cyclic anhydride (adipic anhydride and succinic anhydride) and subsequently polymerized via the corresponding mixed anhydrides by melt polycondensation. DSC traces revealed that the polymers had low Tg (< 40 degrees C) and no crystallinity. The static contact angle measurements indicated that the poly(ester-anhydrides) were more hydrophobic than poly(D,L-lactide) and poly(adipic anhydride). In vitro degradation of the polymers was also investigated in pH 7.4 PBS at 37 degrees C. It was found that degradation rate of the poly(ester-anhydrides) increased with p-carboxy phenyl adipic monoester (CPA) content in the polymers and the degradation duration could be adjusted from ca. 20 days to ca. 2 months. Erosion curve of poly(p-carboxy phenyl adipic monoester anhydride) (PCPA) was characterized by a linear region of weight loss at nearly constant rate in the first 7 days (ca. 80% of weight loss) followed by a gradual decrease region. IR and SEM analysis showed that significant erosion of PCPA occurred in the outer layer and no apparent erosion could be seen in the inner layer of the degrading sample after 7-day degradation. The poly(ester-anhydrides) may be used as either anti-infective polymeric prodrugs or matrices for drug delivery.

Acids↗

PubMed2001

Preparation and release characteristics of protein-loaded polyanion/gelatin complex.

PURPOSE: This paper describes preparation of polymethacrylic acid/gelatin complex and Myoglobin release characteristics in order to evaluate the polyanion/gelatin complexes as matrices that can release proteins at a near zero-order kinetics over a long period of time. METHODS: Mb-loaded PMAA/gelatin complex was prepared by two different titration methods. Mb entrapment efficiency and PMAA/gelatin ratio in the complex were determined by HPLC. The release of Mb and gelatin from the complex was followed by HPLC. Mb conformation was detected by UV-vis spectrophotometer and capillary electrophoresis apparatus. RESULTS: Polyanion/gelatin feed ratio of the polyanion/gelatin/Mb mixed solution has great effects on complex yield and protein entrapment efficiency when "Type I" titration method is adopted, while for the colloid titration method the complex yield and protein entrapment efficiency are hardly influenced by preparative conditions (ca. 100%). Mb release rate could be adjusted by the complex composition (e.g., PMAA MW, hydrophobilization of PMAA, Mb loading and PMAA/gelatin ratio, etc.). Moreover, by coating of high MW PMAA/gelatin complex cylinder in a hydrophobic membrane with one open-end left, the period of protein release can extend to ca. 20 days and the release displays a near zero-order pattern. The protein release profiles can be described by the dissociation/erosion mechanism. The entrapment process has little effect on Mb conformation. CONCLUSIONS: The studied polyanion/gelatin complex is promising to be used as protein carriers to release proteins at a near zero-order kinetics over a long period of time by selecting suitable polyanions and designing the device structure.

Gelatin↗

PubMed2001

In vivo degradation and biocompatibility of a new class of alternate poly(ester-anhydrides) based on aliphatic and aromatic diacids.

The degradation, tissue compatibility, and toxicology of a novel class of alternate poly(ester-anhydrides) were assessed in rats. It was observed that the degradation rate of the polymers in vivo was slower than that in vitro. In addition, erosion and intact zone were observed for all the polymers. IR and SEM analysis of the outer erosion and inner intact zone revealed that the outer zone degraded more rapidly than the inner zone. Such results were similar to that in vitro. All the studied poly(ester-anhydrides) produced mild inflammatory reactions and tissue encapsulation by layers of fibroblastic cells in vivo. Observation of liver and kidney tissue by light microscopy suggested the hydrolytic products of the studied poly(ester-anhydrides) had no harmful effects on the normal tissue/organs. In addition, the polymer and the breakdown products were found to be non-mutagenic by examination of micronucleus in bone marrow.

Absorbable Implants↗