Search PubMed⌕ Search

Biomedical subjects

K Horikoshi

Publications and source records attributed to K Horikoshi.

At least 145 records · Page 8Linked to original sources

Structure of the 87-kDa beta-1,3-glucanase gene of Bacillus circulans IAM1165 and properties of the enzyme accumulated in the periplasm of Escherichia coli carrying the gene.

The nucleotides of a gene for the extracellular 87-kDa beta-1,3-glucanase of Bacillus circulans IAM1165 and its flanking regions were sequenced. The sequence showed an open reading frame for 877 amino acids, which corresponds to a precursor of the beta-1,3-glucanase. The coding region of 2631 bp is flanked by putative promoter and transcription terminator sequences. The signal peptide was considered to be consisted of 38 amino acids. The amino acid sequence of the mature enzyme composed of 839 amino acids showed high homology to that of the enzyme from B. circulans WL-12, although these enzymes are different in their sizes. A catalytic domain of the enzyme was estimated central region of the sequence on the basis of comparison of amono acid sequences of beta-1,3- or beta-1,3:1,4-glucanases. Properties of the periplasmic enzyme produced in Escherichia coli carrying the gene were identical with those of the extracellular enzyme produced by B. circulans IAM1165.

Amino Acid Sequence↗

Expression of an 87-kD-beta-1,3-glucanase of Bacillus circulans IAM1165 in Saccharomyces cerevisiae by low-temperature incubation.

A DNA segment encoding a signal peptide from yeast invertase was fused in frame to bglH gene encoding 87-kD-beta-1,3-glucanase from Bacillus circulans IAM1165 and was expressed in the yeast Saccharomyces cerevisiae under the control of the GAL1 gene promoter. Yeast cells containing this fused gene produced active beta-1,3-glucanase in the medium after a long period of incubation at low temperature. The enzyme produced by yeast was heterogeneous in size, and larger than the enzyme produced by Escherichia coli.

Amino Acid Sequence↗

Cloning of a gene required for the alkaliphily of alkaliphilic Bacillus sp. strain C-125.

An alkali-sensitive mutant was obtained from alkaliphilic Bacillus sp. strain C-125. A DNA fragment required for the alkaliphily was cloned from the chromosomal DNA of strain C-125 by using the alkali-sensitive mutant as a host. The nucleotide sequence of the cloned DNA fragment indicated the occurrence of several ORFs. Comparison of these ORFs with sequences in the available databases revealed no closely related sequences.

Bacillus↗

Instability of the protoplast membrane of facultative alkaliphilic Bacillus sp. C-125 at alkaline pH values below the pH optimum for growth.

Cell walls of facultative alkaliphilic Bacillus sp. C-125 consist of three polymers (peptidoglycan, teichuronopeptide and teichuronic acid). Protoplasts prepared from the strain with egg-white lysozyme regenerated cell walls at neutral pH, but not at pH above 8.5. The protoplasts were susceptible to lysis at alkaline pH. The protoplasts exposed to alkaline pH rapidly burst and lost ability to regenerate their cell walls. The alkali-instability was similar to that of protoplasts from neutrophilic Bacillus subtilis 168. The membrane vesicles were also labile at alkaline pH. The acidic wall components of strain C-125 may contribute to stabilization of the cytoplasmic membrane of cells growing at alkaline pH, probably by shielding the membrane from direct exposure to an alkaline environment.

Bacillus↗

Molecular cloning, nucleotide sequence and expression of the structural gene for a thermostable alkaline protease from Bacillus sp. no. AH-101.

Alkaliphilic Bacillus sp. no. AH-101 produces an extremely thermostable alkaline serine protease that has a high optimum pH (pH 12-13) and shows keratinolytic activity. The gene encoding this protease was cloned in Escherichia coli and expressed in B. subtilis. The cloned protease was identical to the AH-101 protease in its optimum pH and thermostability at high alkaline pH. An open reading frame of 1083 bases, identified as the protease gene, was preceded by a putative Shine-Dalgarno sequence (AAAGGAGG) with a spacing of 11 bases. The deduced amino acid sequence revealed a pre-pro-peptide of 93 residues followed by the mature protease comprising 268 residues. AH-101 protease showed slightly higher homology to alkaline proteases from alkaliphilic bacilli (61.2% and 65.3%) than to those from neutrophilic bacilli (54.9-56.7%). Also AH-101 protease and other proteases from alkaliphilic bacilli shared common amino acid changes and a four amino acid deletion when compared to the proteases from neutrophilic bacilli. AH-101 protease, however, was distinct among the proteases from alkaliphilic bacilli in showing the lowest homology to the others.

Amino Acid Sequence↗

Analysis of the flagellin (hag) gene of alkalophilic Bacillus sp. C-125.

Motility of the alkalophilic Bacillus sp. C-125, a flagellate bacterium, was demonstrated to be Na(+)- and pH-dependent. Flagellin protein from this strain was purified to homogeneity and the N-terminal sequence determined. Using the hag gene of Bacillus subtilis as a probe, the hag gene of Bacillus sp. C-125 was identified and cloned into Escherichia coli. Sequencing of this hag gene revealed that it encodes a protein of 272 amino acids (M(r) 29,995). The predicted N terminal sequence of this protein was identical to that determined by N-terminal sequencing of the flagellin protein from strain C-125. The alkalophilic Bacillus sp. C-125 flagellin shares homology with other known flagellins in both the N- and C-terminal regions. The middle portion, however, shows considerable differences, even from that of flagellin from the related species, B. subtilis.

Amino Acid Sequence↗

Molecular cloning and characterization of an alkalophilic Bacillus sp. C125 gene homologous to Bacillus subtilis sec Y.

A 1.8 kb HindIII DNA fragment containing the secY gene of alkalophilic Bacillus sp. C125 has been cloned into plasmid pUC119 using the B. subtilis secY gene as a probe. The complete nucleotide sequence of the cloned DNA indicated that it contained one complete ORF and parts of two other ORFs. The similarity of these ORFs to the sequences of the B. subtilis proteins indicated that they were the genes for ribosomal protein L15-SecY-adenylate kinase, in that order. The gene product of the alkalophilic Bacillus sp. C125 secY homologue was composed of 431 amino acids and its M(r) value has been calculated to be 47,100. The distribution of hydrophobic amino acids in the gene product suggested that the protein was a membrane integrated protein with ten transmembrane segments. The total amino acid sequence of alkalophilic Bacillus sp. C125 secY homologue showed 69.7% homology with that of B. subtilis secY. Regions of remarkably high homology (78% identity) were present in transmembrane regions, and cytoplasmic domains (73% identity) with less homologous regions present in extracellular domains (43% identity).

Amino Acid Sequence↗

Isolation and partial characterization of an 87-kilodalton beta-1,3-glucanase from Bacillus circulans IAM1165.

Bacillus circulans IAM1165 produces at least two extracellular beta-1,3-glucanases that lyse fungal cell walls. One of these extracellular enzymes was purified to homogeneity. The molecular mass was 87 kDa, and the pI was 4.3. The optimum temperature of the enzyme reaction was 70 degrees C when laminarin (a soluble beta-1,3-glucan) was used as the substrate. The pH range of the enzyme was broad (pH 4.5 to 9.0), and the optimum pH was 6.5. The enzyme is an endo beta-1,3-glucanase and has a random cleavage pattern.

Bacillus↗

Haloalkaliphilic maltotriose-forming alpha-amylase from the archaebacterium Natronococcus sp. strain Ah-36.

A haloalkaliphilic archaebacterium, Natronococcus sp. strain Ah-36, produced extracellularly a maltotriose-forming amylase. The amylase was purified to homogeneity by ethanol precipitation, hydroxylapatite chromatography, hydrophobic chromatography, and gel filtration. The molecular weight of the enzyme was estimated to be 74,000 by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The amylase exhibited maximal activity at pH 8.7 and 55 degrees C in the presence of 2.5 M NaCl. The activity was irreversibly lost at low ionic strength. KCl, RbCl, and CsCl could partially substitute for NaCl at higher concentrations. The amylase was stable in the range of pH 6.0 to 8.6 and up to 50 degrees C in the presence of 2.5 M NaCl. Stabilization of the enzyme by soluble starch was observed in all cases. The enzyme activity was inhibited by the addition of 1 mM ZnCl2 or 1 mM N-bromosuccinimide. The amylase hydrolyzed soluble starch, amylose, amylopectin, and, more slowly, glycogen to produce maltotriose with small amounts of maltose and glucose of an alpha-configuration. Malto-oligosaccharides ranging from maltotetraose to maltoheptaose were also hydrolyzed; however, maltotriose and maltose were not hydrolyzed even with a prolonged reaction time. Transferase activity was detected by using maltotetraose or maltopentaose as a substrate. The amylase hydrolyzed gamma-cyclodextrin. alpha-Cyclodextrin and beta-cyclodextrin, however, were not hydrolyzed, although these compounds acted as competitive inhibitors to the amylase activity. Amino acid analysis showed that the amylase was characteristically enriched in glutamic acid or glutamine and in glycine.

Amino Acids↗

Kinetic properties of electrogenic Na+/H+ antiport in membrane vesicles from an alkalophilic Bacillus sp.

The effects of imposed proton motive force on the kinetic properties of the alkalophilic Bacillus sp. strain N-6 Na+/H+ antiport system have been studied by looking at the effect of delta psi (membrane potential, interior negative) and/or delta pH (proton gradient, interior alkaline) on Na+ efflux or H+ influx in right-side-out membrane vesicles. Imposed delta psi increased the Na+ efflux rate (V) linearly, and the slope of V versus delta psi was higher at pH 9 than at pH 8. Kinetic experiments indicated that the delta psi caused a pronounced increase in the Vmax for Na+ efflux, whereas the Km values for Na+ were unaffected by the delta psi. As the internal H+ concentration increased, the Na+ efflux reaction was inhibited. This inhibition resulted in an increase in the apparent Km of the Na+ efflux reaction. These results have also been observed in delta pH-driven Na+ efflux experiments. When Na(+)-loaded membrane vesicles were energized by means of a valinomycin-induced inside-negative K+ diffusion potential, the generated acidic-interior pH gradients could be detected by changes in 9-aminoacridine fluorescence. The results of H+ influx experiments showed a good coincidence with those of Na+ efflux. H+ influx was enhanced by an increase of delta psi or internal Na+ concentration and inhibited by high internal H+ concentration. These results are consistent with our previous contentions that the Na+/H+ antiport system of this strain operates electrogenically and plays a central role in pH homeostasis at the alkaline pH range.

Alkalies↗

Molecular cloning, nucleotide sequence, and expression of the structural gene for alkaline serine protease from alkaliphilic Bacillus sp. 221.

The gene encoding an alkaline serine protease from alkaliphilic Bacillus sp. 221 was cloned in Escherichia coli and expressed in Bacillus subtilis. An open reading frame of 1,140 bases, identified as the protease gene was preceded by a putative Shine-Dalgarno sequence (AGGAGG) with a spacing of 7 bases. The deduced amino acid sequence had a pre-pro-peptide of 111 residues followed by the mature protease comprising 269 residues. The alkaline protease from alkaliphilic Bacillus sp. 221 had higher homology to the protease from alkaliphilic bacilli (82.1% and 99.6%) than to those from neutrophilic bacilli (60.6-61.7%). Also Bacillus sp. 221 protease and other protease from alkaliphilic bacilli shared common amino acid changes and 4 amino acid deletions that seemed to be related to characteristics of the enzyme of alkaliphilic bacilli when compared to the proteases from neutrophilic bacilli.

Amino Acid Sequence↗

pH-dependent flagella formation by facultative alkaliphilic Bacillus sp. C-125.

A facultative alkaliphilic strain of Bacillus sp. C-125 grown at alkaline pH had many sinuous peritrichous flagella and was highly motile. However, most of the cells grown initially at pH 7 were non-motile and possessed few straight flagella. The amount of flagellin was low when the organism was grown at pH 7, suggesting that non-motility is due to poor synthesis of flagellin. The molecular mass of the flagellin was 37 kDa and the isoelectric point was pH 5.0. The amino acid composition of the flagellin was similar to that found in the flagellin from neutrophilic Bacillus subtilis 168.

Amino Acid Sequence↗

Construction and characterization of the chimeric enzymes between the Bacillus subtilis cellulase and an alkalophilic Bacillus cellulase.

The amino acid sequences of cellulase from Bacillus subtilis (BSC) and that from an alkalophilic Bacillus sp. N-4 (NK1) show significant homology in most parts except for the C-terminal portions. Despite the high homology, the pH activity profiles of the two enzymes are quite different; BSC has its optimum pH at 6-6.5, whereas NK1 is active over a broad pH range from 6 to 10.5. In order to identify the structural features which determine such pH activity profiles, chimeric cellulases between BSC and NK1 were constructed using four restriction sites commonly present within the homologous coding sequences, and were produced in Escherichia coli. The chimeric cellulases showed various chromatographic behaviors, reflecting the origins of their C-terminal regions. The pH activity profiles of the chimeric enzymes in the alkaline range could be classified into either the BSC or NK1 type mainly depending on the origins of the fifth C-terminal regions. In the acidic range, the profile was determined only by the origin of the fourth enzyme region from the N terminus. Comparison of the kinetic parameters between pH 5 and 6 using p-nitrophenyl cellobioside as a substrate indicated that the fourth region is responsible for the pH-dependent change of the kcat value. Only a limited number of amino acids in the fourth region may affect on deprotonation of catalytic residues of the cellulases and modulate the catalytic activity in the acidic pH values.

Amino Acid Sequence↗

On-line monitoring of marine cyanobacterial cultivation based on phycocyanin fluorescence.

A novel on-line fluorescence monitoring system for marine cyanobacterial cultivation was developed. This method is based on the measurement of intracellular phycocyanin content, which is the major light harvesting protein. A fluorescence spectrophotometer, equipped with a flow cell connected with a culture liquid recycling tube was used. Experiments were carried out using a marine unicellular cyanobacteria Synechococcus sp. NKBG 042902 isolated from Japanese coastal sea water. We have optimized excitation wavelength to avoid the light scattering, using non-pigmented old cells which no longer contained phycocyanin. At an excitation wavelength of 590 nm, light scattering was minimized. Viable cell concentration could be measured in the range of 2 x 10(6) to 2 x 10(8) cells per ml, without pronounced light scattering. Continuous monitoring of marine cyanobacteria cultivation was performed. Cell concentrations were determined by both culture fluorescence and by using a hemacytometer. A good linear correlation was obtained. We conclude that on-line monitoring of cyanobacterial culture fluorescence based on phycocyanin is a rapid, efficient and also versatile method for determining viable cell concentration.

Biotechnology↗

Pseudomonas putida Which Can Grow in the Presence of Toluene.

A Pseudomonas putida strain able to grow in the presence of more than 50% toluene was isolated from soil. The strain was tolerant of other toxic solvents, including aliphatic hydrocarbons, alicyclic hydrocarbons, aromatic hydrocarbons, alcohols, and ethers. The stability of the solvent tolerance of strain IH-2000 was stimulated by addition of Mg and Ca to the medium containing toluene.

Journal Article↗