Search PubMed⌕ Search

Biomedical subjects

K E Healy

Publications and source records attributed to K E Healy.

15 recordsLinked to original sources
PubMed1999

Surfaces designed to control the projected area and shape of individual cells.

Materials with spatially resolved surface chemistry were designed to isolate individual mammalian cells to determine the influence of projected area on specific cell functions (e.g., proliferation, cytoskeletal organization). Surfaces were fabricated using a photolithographic process resulting in islands of cell binding N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS) separated by a nonadhesive interpenetrating polymer network [poly (acrylamide-co-ethylene glycol); P (AAm-co-EG)]. The surfaces contained over 3800 adhesive islands/cm2, allowing for isolation of single cells with projected areas ranging from 100 microns 2 to 10,000 microns 2. These surfaces provide a useful tool for researching how cell morphology and mechanical forces affect cell function.

Actins↗
PubMed1998

Ectopic bone formation via rhBMP-2 delivery from porous bioabsorbable polymer scaffolds.

Drug delivery devices have received considerable interest in the field of tissue engineering due to the advent of proteins that can induce proliferation and differentiation of various cells to form specific tissues and organs, for example, bone morphogenetic protein (BMP-2) for osteogenesis. In this work the delivery of a clinically relevant bioactive factor, recombinant human rhBMP-2, was tested in vivo in a rat ectopic bone induction assay. Contact radiography and radiomorphometry showed significantly more radiopacity (1798+/-183 mm2 versus. 784+/-570 mm2 radiopaque area/g scaffold) in the BMP scaffolds than controls (p < 0.002). De novo woven bone and abundant osteoid formation were confirmed from histological sections while controls contained minimal amounts of tissue. Histomorphometry revealed significantly more bone (124+/-93 mm2 versus 7+/-12 mm2) and osteoid (72+/-43 mm2 versus 20+/-21 mm2) in the BMP implants (p < 0.001). These scaffolds demonstrated the ability to deliver viable rhBMP-2 and to induce bone formation in an ectopic site.

Absorption↗
PubMed1998

Biomolecular modification of p(AAm-co-EG/AA) IPNs supports osteoblast adhesion and phenotypic expression.

Interpenetrating polymer networks (IPNs) were designed to resist materials fouling caused by non-specific protein adsorption, and indiscriminate cell or bacterial adhesion. These IPNs were thin adherent films (approximately 20 nm) comprised of acrylamide (AAm), ethylene glycol (EG), and acrylic acid (AA) grafted to either silicon waters or quartz substrates via photoinitiated free radical polymerization. These networks were further modified to promote specific cell adhesion by tethering bioactive groups such as peptides that mimic cell-binding domains found on extracellular matrix molecules. As a specific example of biomolecular surface engineering, peptides from the cell-binding domain of bone sialoprotein were tethered to a p(AAm-co-EG/AA) IPN to control cell behavior at the surface. The networks were characterized by contact angle measurements, spectroscopic ellipsometry, and X-ray photoelectron spectroscopy to convey information on IPN wettability, thickness, and chemistry. The surface characterization data supported the theory that the PEG/AA layer formed an IPN with the underlying p(AAm) network, and after graft modification of this IPN with diamino PEG (PEG(NH2)2), the PEG(NH2)2 chains were enriched at the surface. Rat calvarial osteoblasts attached to Arg-Gly-Asp (RGD) modified IPNs at levels significantly greater than on clean quartz, Arg-Gly-Glu (RGE) modified, or the PEG(NH2)2 modified IPN, with or without serum in the media. Cells maintained in media containing 15% fetal bovine serum (FBS) proliferated, exhibited nodule formation, and generated sheets of mineralized extracellular matrix (ECM) with the addition on beta-glycerophosphate to the media. Cell adhesion and mineralized ECM formation were specifically dependent on the peptide sequence present at the surface.

Acrylic Resins↗
PubMed1997

The role of vitronectin in the attachment and spatial distribution of bone-derived cells on materials with patterned surface chemistry.

In recent years a central objective of tissue engineering has been understanding the interaction of cells with biomaterial surfaces. In this study we examined the protein adsorption events necessary to control the attachment and the subsequent spatial distribution of bone-derived cells exposed to chemically modified surfaces. Silane chemistry and photolithography techniques were used to create substrates with alternating regions of an aminosilane, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS), along side an alkylsilane, dimethyldichlorosilane (DMS), on quartz surfaces. Sera depleted of fibronectin (Fn), vitronectin (Vn), or both were used to determine if these proteins were necessary for the initial attachment and spatial distribution of bone-derived cells exposed to modified surfaces in vitro. The kinetics and mechanisms of the spatial distribution of cells were examined using light microscopy and digital image acquisition and subsequently were analyzed. Compared to complete serum, the use of serum depleted of fibronectin with vitronectin included had minimal effect on the cell attachment, spreading, and spatial distribution on the EDS regions of the surface. However, the use of serum depleted of vitronectin with or without fibronectin included resulted in greatly reduced cell attachment and spreading. Thus the presence of vitronectin was required for the attachment, spreading, and spatial distribution of bone-derived cells exposed to EDS/DMS-patterned surfaces.

Adsorption↗
PubMed1997

The detachment strength and morphology of bone cells contacting materials modified with a peptide sequence found within bone sialoprotein.

Adhesion, spreading, and focal contact formation of primary bone-derived cells on quartz surfaces grafted with a 15 amino acid peptide that contained a -RGD-(-Arg-Gly-Asp-) sequence unique to bone sialoprotein was investigated. The peptide surfaces were fabricated by using a heterbifunctional crosslinker, sulfosuccinimidyal 4-(N-maleimidomethyl)cyclohexane-1-carboxylate, to link the peptide to amine functionalized quartz surfaces. Contact angle measurements, spectroscopic ellipsometry, and X-ray photoelectron spectroscopy were used to confirm the chemistry and thickness of the overlayers. A radial flow apparatus was used to characterize cell detachment from peptide-grafted surfaces. After 20 min of cell incubation, the strength of cell adhesion was significantly (p < 0.05) higher on the -RGD- compared to -RGE- (control) surfaces. Furthermore, the mean area of cells contacting the -RGD- was significantly (p < 0.05) higher than -RGE- surfaces. Vinculin staining showed formation of small focal contact patches on the periphery of bone cells incubated for 2 h on the -RGD- surfaces; however, few or no focal contacts were formed by cells seeded on the -RGE-grafted surfaces. The methods of peptide immobilization utilized in this study can be applied to implants, biosensors, and diagnostic devices that require specificity in cell adhesion.

Amino Acid Sequence↗
PubMed1996

Kinetics of bone cell organization and mineralization on materials with patterned surface chemistry.

Materials with spatially resolved chemistries (i.e. patterned surfaces) have been used to guide and organize the position of mammalian cells in vitro. A common theme in guiding the spatial distribution of cells has been the use of patterned alkylsiloxanes, where one region contains an aminosilane and the other an alkylsilane. The regions of the aminosilane served as preferential sites for cell attachment and spreading, presumably dependent on the association between cell surface proteoglycans the positively charged amine. In this study, experiments were conducted with patterns of N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS) and dimethyldichlorosilane (DMS) to determine the kinetics of spatial organization of bone-derived cells, and whether initial attachment and spreading affected the rate of matrix mineralization (i.e. bone formation) in extended cultures. The bone cells required the presence of serum or preadsorption of serum proteins to the patterned EDS/DMS surface to organize according to the lithographically defined surface chemistry. Time-lapse video microscopy indicated that cells were randomly distributed over the EDS/DMS surface at the time of plating, but organized on the EDS regions within 30 min. When cultures were extended for 15 and 25 days, the matrix synthesized by the cells was preferentially mineralized on the EDS chemistry. These results demonstrate the ability of surface chemistry modifications to organize cells and form mineralized tissue in vitro. The methods employed should have general value to the engineering of tissues in vitro.

Animals↗
PubMed1993

A versatile technique for patterning biomolecules onto glass coverslips.

A fast, inexpensive, and versatile technique for patterning the surface of glass coverslips with molecules of biological interest is described. The technique combines photolithographic, silane-coupling, and protein adsorption procedures to pattern coverslips with amines, alkanes, and proteins with micrometer spatial resolution. The attachment of amines and alkanes was verified using contact angle and X-ray photoelectron spectroscopic (XPS) measurements. XPS results showed that amines and alkanes were attached in 1-4 nm thickness covering approximately 20% and 45%, respectively, of the surface. Patterns of amines were visualized using fluorescent staining, and patterns of proteins were detected immunochemically. Patterned coverslips were used to investigate adhesion and neurite outgrowth of mouse neuroblastoma (N1E-115) cells. Cells were examined on the following patterns: alkane-glass, protein-glass, amine-alkane, and amine-protein. Cell attachment and neurite outgrowth on patterned coverslips displayed the following preferences: laminin, fibronectin, or collagen IV > amine or glass > alkane or bovine serum albumin. This patterning method should be useful for studies of cell-surface interactions, cell migration, nerve regeneration, and the formation of neural networks in vitro.

Alkanes↗
PubMed1992

The mechanisms of passive dissolution of titanium in a model physiological environment.

The surface chemistry, oxidation, and disolution kinetics of titanium were measured to establish the mechanisms of passive dissolution in physiological environments. Titanium thin films were immersed in 8.0 mM ethylenediamine-tetraacetic acid in simulated interstitial electrolyte (EDTA/SIE) and maintained at 37 degrees C, 10% O2, 5% CO2 and 7.2 pH for periods of time up to 3200 h (133 days). Two immersion schemes were employed: the integral sequentially determined the titanium released into a solution of accumulated dissolution products; and the differential continuously replenished the test solution. The solutions were analyzed for titanium by electrothermal atomic absorption spectrometry (EAAS), and the sample surfaces were analyzed by Auger electron spectroscopy (AES) and x-ray photoelectron spectroscopy (XPS) to determine oxide composition, stoichiometry, and thickness. Prior to immersion two types of hydroxyl (OH) groups were distinguished on the TiO2 surface. Upon immersion, the chemistry of the surface changed as a function of immersion: the presence of OH groups increased and P (nonelemental) was detected at the surface. The dissolution kinetics obeyed a two-phase logarithmic model, where the transition between phases occurred simultaneously with the adsorption of the P-containing species. The dissolution kinetics depended on surface reactions, electric field strength, and molecular diffusion. These mechanisms explain the observed dependence of dissolution kinetics on the properties of the surface oxide and solution ligands.

Edetic Acid↗
PubMed1992

Hydration and preferential molecular adsorption on titanium in vitro.

Surface sensitive spectroscopies, Auger electron and X-ray photoelectron (XPS), were used to determine changes in titanium oxide composition, oxide stoichiometry, and adsorbed surface species as a function of exposure to human serum in a balanced electrolyte (serum/SIE) and 8.0 mM ethylenediaminetetraacetic acid in a balanced electrolyte (EDTA/SIE) at 37 degrees C. Before immersion, the oxide was near ideal TiO2, covered by two types of hydroxyl groups: acidic OH(s) with oxygens doubly coordinated to titanium, and basic Ti-OH groups singly coordinated. After extended exposure to both solutions, up to 5000 h (ca. 208 d), the surface concentration of OH groups increased and non-elemental P appeared. The P LVV Auger transition and P 2p spectra indicated the peak positions were similar to reference phosphate compounds. The adsorbed phosphate species were presumed to be either Ti-H2PO4 or Ti-HPO4-. The XPS data suggested that a lipoprotein and/or glycolipid film was adsorbed to the specimens exposed to serum/SIE. Analysis of the preferential lipoprotein/glycolipid adsorption using electrostatic bonding concepts contributed to the refinement of the hierarchical model for the Ti-tissue interface. The salient features are that Ti metal is not in direct contact with the biological milieu, rather there is a gradual transition from the bulk metal, near-stoichiometric oxide, Ca and P substituted hydrated oxide, adsorbed lipoproteins and glycolipids, proteoglycans, collagen filaments and bundles to cells.

Adsorption↗
PubMed1988

The effect of plasma-sprayed calcium phosphate ceramic coatings on the metal ion release from porous titanium and cobalt-chromium alloys.

Bone tissue ingrowth in porous materials is enhanced by the deposition of bioactive calcium phosphate ceramic linings onto the pore walls. These bioactive coatings can be deposited using several methods which yield a variety of coating efficiencies and thereby influence the mechanisms and kinetics of ion release from the metal. We analyzed the effect of plasma-spraying hydroxyapatite onto titanium and cobalt-chromium alloys by measuring the release of Ti, Al, V, Co, and Cr in vitro. Plasma-sprayed coatings significantly reduced the Ti and Al release from titanium-based alloy specimens. The tendencies of release from the cobalt-based specimens are less pronounced. The data substantiate that neither localized enhanced passive dissolution of metal ions nor ceramic shielding of the metal occurs. The Scanning Auger Electron Microprobe Spectroscopic data suggest that the dissipation of thermal and kinetic energy of the ceramic particle at the time of impact can produce compositional and structural changes in the metal surfaces. The resulting effects are significant for the titanium alloy but less significant for the Co-Cr alloy system.

Alloys↗
PubMedDate not supplied

A probabilistic approach to measure the strength of bone cell adhesion to chemically modified surfaces.

Patterned surfaces with alternating regions of amino silanes [N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS)] and alkyl silanes [dimethyldichlorosilane (DMS)] have been used to alter the kinetics of spatial distribution of cells in vitro. In particular, we have previously observed the preferential spatial distribution of bone cells on the EDS regions of EDS/ DMS patterned surfaces (10). In this study, we examined whether the mechanism of spatial distribution of cells on the EDS regions was adhesion mediated. Homogeneous layers of EDS and DMS were immobilized on quartz substrates and characterized by contact angle. X-ray photoelectron spectroscopy, and spectroscopic ellipsometry. The strength of bone cell attachment to the modified substrates was examined using a radial flow apparatus, within either 20 min or 2 hr of cell incubation in the presence of serum. A Weibull distribution was chosen to characterize the strength of cell-substratum adhesion. Within 20 min of cell exposure, the strength of adhesion was significantly larger on EDS and clean surfaces, compared with DMS surfaces (p < 0.001). Within 2 hr of cell incubation, there was no statistical difference between the strength of cell adhesion to EDS, DMS, and clean surfaces. The results of this study suggest that the surface chemistry mediates adhesion-based spatial cell arrangement through a layer of adsorbed serum proteins.

Animals↗
PubMedDate not supplied

Biomimetic peptide surfaces that regulate adhesion, spreading, cytoskeletal organization, and mineralization of the matrix deposited by osteoblast-like cells.

In an effort to regulate mammalian cell behavior in contact with solid material surfaces, we have functionalized surfaces with different ratios of both the putative cell binding (-Arg-Gly-Asp-) domain and a consensus heparan-binding domain. The peptide sequences -Arg-Gly-Asp- (-RGD-) and -Phe-His-Arg-Arg-Ile-Lys-Ala- (-FHRRIKA-) or mixtures of the two in the ratios of 75:25 (mimetic peptide surface I), 25:75 (mimetic peptide surface II), and 50:50 (mimetic peptide surface III) were immobilized on model surfaces using a heterobifunctional cross-linker to link the peptide(s) to amine-functionalized quartz surfaces. Contact angle measurements, spectroscopic ellipsometry, and X-ray photoelectron spectroscopy were used to confirm the chemistry, thickness of the overlayers, and surface density of immobilized peptides ( approximately 4-6 pmol/cm2). The degree of rat calvaria osteoblast-like cell spreading, focal contact formation, cytoskeletal organization, proliferation, and mineralization of the extracellular matrix (ECM) on model biomaterial surfaces was examined. Mimetic peptide surface II (MPS II) and MPS III supported the highest degree of cell spreading (p < 0.05), following 4 h of incubation, compared to MPS I, homogeneous -RGD-, and homogeneous -FHRRIKA- grafted surfaces. Furthermore, MPS I, MPS II, MPS III, and homogeneous -RGD- surfaces promoted the formation of focal contacts and stress fibers by attached bone cells. The strength of bone cell detachment following 30 min of incubation was significantly higher (p < 0.05) on MPS II surfaces compared to homogeneous -RGD- and -FHRRIKA-. However, the degree of cell proliferation on the peptide surfaces were not significantly different from each other (p > 0.1). Following 24 d in culture, the areas of mineralized ECM formed on MPS II and MPS III surfaces were significantly (p < 0.05) larger than those of other surfaces. These results demonstrate that utilizing peptide sequences incorporating both cell- and heparin-adhesive motifs can enhance the degree of cell surface interactions and influence the long-term formation of mineralized ECM in vitro.

Amino Acid Sequence↗
PubMedDate not supplied

A physical model for the titanium-tissue interface.

X-ray photoelectron spectroscopy (XPS) was used to determine changes in titanium oxide composition, oxide stoichiometry, and adsorbed surface species as a function of exposure to model physiologic environments. The oxide on titanium became heterogeneous and polarized as a function of exposure. Changes included an increase in surface hydroxyl groups, and adsorption of H2PO4- and HPO4(2-). The heterogeneous nature of the surface led to preferential adsorption of lipoproteins, glycolipids, or both from serum.

Biocompatible Materials↗