Search PubMed⌕ Search

Biomedical subjects

K D Nelson

Publications and source records attributed to K D Nelson.

At least 19 recordsLinked to original sources
PubMed2006

Release of bovine serum albumin from a hydrogel-cored biodegradable polymer fiber.

We have developed a novel biodegradable, polymeric fiber construct that is coextruded using a wet-spinning process into a core-sheath format with a polysaccharide pre-hydrogel solution as the core fluid and poly(L-lactic acid) (PLLA) as the sheath. The biodegradable, biocompatible fibers were extruded from polymeric emulsions comprised of solutions of various molecular weights of PLLA dissolved in chloroform and containing dispersed, protein-free aqueous phases comprising up to 10% of the emulsion volume. Biologically sensitive agents can be loaded via a dispersed aqueous phase in the polymer, and/or directly into the polysaccharide. We show that this core-sheath fiber format will load a model protein that can be delivered for extended periods in vitro. Bovine serum albumin (BSA) was loaded into the fiber core as a model protein. We have shown that the greater the volume of the protein-free aqueous phase dispersed into the polymeric continuous-phase emulsion, the greater the total release of BSA encapsulated by a core gel comprised of 1% sodium alginate solution. We conclude this fiber format provides a promising vehicle for in vivo delivery of biological molecules. Its biocompatibility and biodegradability also allow for its use as a possible substrate for tissue engineering applications.

Alginates↗
PubMed2004

Observation of a narrow charm-strange meson D(+)(sJ)(2632)-->D(+)(s)eta and D(0)K(+).

We report the first observation of a charm-strange meson D(+)(sJ)(2632) at a mass of 2632.5+/-1.7 MeV/c(2) in data from SELEX, the charm hadro-production experiment E781 at Fermilab. This state is seen in two decay modes, D(+)(s)eta and D0K+. In the D(+)(s)eta decay mode we observe a peak with 101 events over a combinatoric background of 54.9 events at a mass of 2635.4+/-3.3 MeV/c(2). There is a corresponding peak of 21 events over a background of 6.9 at 2631.5+/-2.0 MeV/c(2) in the decay mode D0K+. The decay width of this state is <17 MeV/c(2) at 90% confidence level. The relative branching ratio Gamma(D0K+)/Gamma(D(+)(s)eta) is 0.14+/-0.06. The mechanism that keeps this state narrow is unclear. Its decay pattern is also unusual, being dominated by the D(+)(s)eta decay mode.

Journal Article↗
PubMed2004

Odd-parity superconductivity in Sr2RuO4.

Phase-sensitive measurements were made on Sr2RuO4 to establish unambiguously the odd-parity pairing in this material. The critical current of Au(0.5)In(0.5)-Sr2RuO4 superconducting quantum interference devices prepared on Sr2RuO4 single crystals was found to be a maximum for devices with junctions on the same side of the crystal and a minimum for devices with junctions on opposite sides, in the limit of zero magnetic flux; these findings indicate that the phase of the superconducting order parameter in Sr2RuO4 changes by pi under inversion. This result verifies the odd-parity pairing symmetry and the formation of spin-triplet Cooper pairs in Sr2RuO4.

Journal Article↗
PubMed2003

Quantum phase transition in quasi-one-dimensional BaRu6O12.

We report the first systematic study of the electrical transport and magnetic properties of BaRu6O12, which has a quasi-one-dimensional (quasi-1D) hollandite structure. We show that BaRu6O12 is quasi-1D electronically as well. Its physical properties were found to be extremely sensitive to disorder. Furthermore, a transition from being metallic with a resistance drop around 2 K to being weakly insulating as the applied magnetic field was increased was also found. We propose that these two features are related to the possible presence of a quantum phase transition in this material system.

Journal Article↗
PubMed2002

First observation of the doubly charmed baryon Xi(+)(cc).

We observe a signal for the doubly charmed baryon Xi(+)(cc) in the charged decay mode Xi(+)(cc)-->Lambda(+)(c)K-pi(+) in data from SELEX, the charm hadroproduction experiment at Fermilab. We observe an excess of 15.9 events over an expected background of 6.1+/-0.5 events, a statistical significance of 6.3sigma. The observed mass of this state is 3519+/-1 MeV/c(2). The Gaussian mass width of this state is 3 MeV/c(2), consistent with resolution; its lifetime is less than 33 fs at 90% confidence.

Journal Article↗
PubMed2002

Orthostatic headache syndrome with CSF leak secondary to bony pathology of the cervical spine.

The syndrome of orthostatic (low pressure) headaches is well described and most commonly occurs following deliberate violation of the dura (e.g. lumbar puncture). This syndrome can also occur spontaneously and results from the leakage of CSF. We describe three patients who suffered from spontaneous CSF leaks secondary to bony pathology of the cervical spine, and propose that this may be a more common aetiology than originally thought. Often these patients are difficult to manage medically, and surgery may be necessary for symptomatic relief.

Adult↗
PubMed2001

Observation of Andreev surface bound states in the 3-K phase region of Sr2RuO4.

The tunneling spectrum of the superconducting phase with Tc approximately 3.0 K has been measured in the Ru-embedded region of Sr2RuO4 using cleaved junctions. A sharp zero-bias conductance peak (ZBCP) has been observed below 3 K. All characteristics of this ZBCP suggest that it originates from Andreev surface bound states, indicating that the pairing in the 3-K phase is also non- s-wave. Below the bulk Tc of Sr2RuO4 (approximately 1.5 K), a crossover from sharp to bell-shaped ZBCP was found. This supports the theory that there is a phase transition in the 3-K phase region near the bulk Tc.

Journal Article↗
PubMed2001

Non-Fermi-liquid behaviour in La4Ru6O19.

Understanding the complexities of electronic and magnetic ground states in solids is one of the main goals of solid-state physics. Transition-metal oxides have proved to be particularly fruitful in this regard, especially for those materials with the perovskite structure, where the special characteristics of transition-metal-oxygen orbital hybridization determine their properties. Ruthenates have recently emerged as an important family of perovskites because of the unexpected evolution from high-temperature ferromagnetism in SrRuO3 to low-temperature superconductivity in Sr2RuO4 (refs 1, 2). Here we show that a ruthenate in a different structural family, La4Ru6O19, displays a number of highly unusual properties, most notably non-Fermi-liquid behaviour. The properties of La4Ru6O19 have no analogy among the thousands of previously characterized transition-metal oxides. Instead, they resemble those of CeCu6-xAux-a widely studied f-electron-based heavy fermion intermetallic compound that is often considered as providing the best example of non-Fermi-liquid behaviour. In the ruthenate, non-Fermi-liquid behaviour appears to arise from just the right balance between the interactions of localized electronic states derived from Ru-Ru bonding and delocalized states derived from Ru-O hybridization.

Journal Article↗
PubMed2001

Precision measurements of the lambda(+)(c) and D0 lifetimes.

We report new precision measurements of the lifetimes of the Lambda(+)(c) and D0 from SELEX, the charm hadroproduction experiment at Fermilab. Based upon 1630 Lambda(+)(c) and 10 210 D0 decays we observe lifetimes of tau[Lambda(+)(c)] = 198.1+/-7.0+/-5.6 fs and tau[D0] = 407.9+/-6.0+/-4.3 fs.

Journal Article↗
PubMed2000

Laminin-coated poly(L-lactide) filaments induce robust neurite growth while providing directional orientation.

Cellular channels during development and after peripheral nerve injury are thought to provide guidance cues to growing axons. In tissue culture where these cues are absent, neurites from dorsal root ganglion neurons grow with a radial distribution. To induce directional axonal growth and to enhance the rate of axonal growth after injury, we have designed microfilaments of poly(L-lactide). We demonstrate that dorsal root ganglia grown on these filaments in vitro extend longitudinally oriented neurites in a manner similar to native peripheral nerves. The extent of neurite growth was significantly higher on laminin-coated filaments compared with uncoated and poly-L-lysine-coated filaments. As high as 5.8 +/- 0.2 mm growth was observed on laminin-coated filaments compared with 2.0 +/- 0.2 mm on uncoated and 2.2 +/- 0.3 mm on poly-L-lysine-coated filaments within 8 days. Schwann cells were found to grow on all types of filaments. They were, however, absent in the leading edges of growth on laminin-coated filaments. Photolysis of Schwann cells caused a significant reduction in the neurite length on all types of filaments. Laminin-coated filaments, however, induced significantly longer neurites compared with uncoated and/or poly-L-lysine-coated filaments even in the absence of Schwann cells. Our results suggest that laminin-coated poly(L-lactide) filaments are suitable for inducing directional and enhanced axonal growth. Implants designed by arranging these microfilaments into bundles should aid regenerating axons by providing guidance cues and channels to organize matrix deposition, cell migration, axon growth, and improve functional recovery.

Animals↗
PubMed2000

Quantitative determination of the peptide retention of polymeric substrates using matrix-assisted laser desorption/ionization mass spectrometry.

Polymer surface-peptide binding interactions have been shown previously to lead to reductions in peptide matrix assisted laser desorption/ionization (MALDI) ion signals. In previous studies, increases in surface-peptide binding were characterized by the increases in both the initially adsorbed and retained quantities of 125I-radiolabeled peptides. The present studies establish a specific correlation between the peptide retention properties of the polymer surface and the reduction in the peptide MALDI ion signal. This correlation is demonstrated by obtaining MALDI mass spectra of angiotensin I applied to various polymer surfaces having a range of peptide adsorption and retention properties. In addition, the use of a MALDI based method of standard additions is shown to allow the quantitation of the polymer surface-peptide retention affinity for angiotensin I and porcine insulin. The MALDI standard additions method for measurement of surface-peptide retention affinities offers a number of significant advantages over conventional radiolabeled peptide binding methods and promises to be a valuable tool for the determination of this important biomaterial characteristic.

Adsorption↗
PubMed2000

Enhancing hepatocyte adhesion by pulsed plasma deposition and polyethylene glycol coupling.

Decreased hepatocyte adhesion to polymeric constructs limits the function of tissue engineered hepatic assist devices. We grafted adhesion peptides (RGD and YIGSR) to polycaprolactone (PCL) and poly-L-lactic acid (PLLA) in order to mimic the in vivo extracellular matrix and thus enhance hepatocyte adhesion. Peptide grafting was done by a novel technique in which polyethylene glycol (PEG)-adhesion peptide was linked to allyl-amine coated on the surface of PCL and PLLA by pulsed plasma deposition (PPD). Peptide grafting density, quantified by radio-iodinated tyrosine in YIGSR, was 158 fmol/cm(2) on PLLA and 425 fmol/cm(2) on PCL surfaces. The adhesion of hepatocytes was determined by plating 250,000 hepatocytes/well (test substrates were coated on 12 well plates) and quantifying the percentage of adhered cells after 6 h by MTT assay. Adhesion on PCL surfaces was significantly enhanced (p < 0.05) by both YIGSR (percentage of adhered cells = 53 +/- 7%) and RGD (53 +/- 12%) when compared to control surfaces (31 +/- 8%). Hepatocyte adhesion on PLLA was significantly (p < 0.05) enhanced on PLLA-PEG-RGD surfaces (76 +/- 14%) compared to control surfaces (42 +/- 19%) and more (68 +/- 25%) but not statistically significant (p = 0.15) on PLLA-PEG-YIGSR surfaces compared to control surfaces. These results indicate that hepatocyte adhesion to PCL and PLLA based polymeric surfaces can be enhanced by a novel adhesion peptide grafting technique using pulsed plasma deposition and PEG cross-linking.

Animals↗
PubMed2000

Quantitative MR imaging study of intravitreal sustained release of VEGF in rabbits.

PURPOSE: To determine whether sustained elevation of vascular endothelial growth factor (VEGF) in the vitreous cavity causes retinal hyperpermeability [blood-retinal barrier (BRB) breakdown] before the development of retinal neovascularization (NV) and to document the kinetics of the integrity of BRB breakdown versus time. METHODS: Poly(L-lactide-co-glycolide)based devices loaded with VEGF were implanted intravitreally in rabbit eyes. Contrast-enhanced magnetic resonance imaging (MRI) methods were used to identify and quantitate the retinal permeability at various time points after implantation. This was done with the newly developed MR tracer AngioMARK (Epix Medical, Boston, MA). After the MRI measurements, fundus photography and fluorescein angiography (FA) also were performed on the same set of animals. RESULTS: At 3 days after implantation, the MR images showed a significant retinal leakage into the vitreous cavity (BRB breakdown) of the VEGF-implanted eyes. To quantitate this leakage, the permeability surface area product (PS) was measured. At 3 days, the mean PS product was 1.25 +/-0.25 x 10(-5) cm3/min. Based on the VEGF in vitro release study, this 3-day BRB breakdown corresponded to a total sustained release of 7.42 +/- 0.54 microg/ml of VEGF. The fundus and FA photographs of these VEGF-implanted eyes taken at 4 days after implantation also showed a considerable level of retinal vascular dilation and tortuosity. By 12 days after implantation, the mean PS product decreased to 5.83 +/- 1.38 x 10(-6) cm3/min. However, the retinal NV was observed only after the second week after implantation. By this time, a total of 10.70 +/- 0.92 microg/ml of VEGF was released in a sustained fashion. Also, after the retinal NV development, retinal detachment also was observed. The control eyes, however, which were implanted with blank devices, remained unchanged and normal during the entire course of this study (PS = 5.57 +/- 0.66 x 10(-7) cm3/min). CONCLUSIONS. The findings indicate that sustained delivery of elevated amounts of VEGF in the vitreous cavity induces a BRB breakdown even earlier than 3 days after implantation. This was achieved after a total sustained release of 7.42 +/- 0.54 microg/ml of VEGF. This retinal leakage regressed by more than half by the time the retinal NV developed. Furthermore, a retinal detachment occurred after this retinal NV. These results are similar to proliferative diabetic retinopathy (PDR). The sustained elevation of VEGF in the vitreous cavity of rabbit eyes is potentially a good model to test VEGF antagonists to treat or prevent PDR in humans. The quantifiable change of BRB breakdown by the contrast-enhanced MRI method is ideal to assess the therapeutic intervention in vivo without killing the animal and may prove to be clinically useful in humans.

Animals↗
PubMed1999

Effects of protein-surface interactions on protein ion signals in MALDI mass spectrometry.

The influence of polymer surface-protein binding affinity on protein ion signals in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry is examined. The surfaces of poly(vinylidene fluoride) and poly(ethylene terephthalate) polymer substrates are modified by pulsed rf plasma deposition of allylamine. By varying the on/off duty cycle of the pulsed rf plasma, the polymer substrate surfaces are coated with thin films having varying densities of surface amine groups. The varying surface amine density is shown to lead to systematic changes in the surface binding affinity for the 125I-radiolabeled peptides angiotensin I and porcine insulin. Unlabeled angiotensin I and porcine insulin are then deposited on the pulsed rf plasma-modified substrates and analyzed by MALDI mass spectrometry. The experimental approach involves applying the peptide to the modified polymer surface in an aqueous phosphate-buffered saline solution and allowing the peptide solution to dry completely under ambient conditions. Subsequently, the MALDI matrix alpha-cyano-4-hydroxycinnamic acid in methanol and 10% trifluoroacetic acid in water are added to the peptide-coated modified polymer surfaces. The results of these studies demonstrate that, for the sample preparation method employed, increases in the surface peptide binding affinity lead to decreases in the peptide MALDI ion signal.

Proteins↗