Search PubMed⌕ Search

Biomedical subjects

Junghun Suh

Publications and source records attributed to Junghun Suh.

14 recordsLinked to original sources
PubMed2006

Peptide-cleaving catalyst selective for melanin-concentrating hormone: Oxidative decarboxylation of N-terminal aspartate catalyzed by Co(III)cyclen.

To provide a firm basis for the new paradigm of drug discovery based on catalysts for oxidative cleavage of N-terminal aspartate (Asp) residues of oligopeptides, oligopeptide-cleaving catalysts were searched by using melanin-concentrating hormone (MCH) as the substrate. MCH is a target for designing drugs to reduce obesity. Catalyst candidates containing the Co(III) complex of cyclen as the catalytic center were prepared by multicomponent condensation reactions. From three kinds of chemical libraries containing about 19,000 catalyst candidates, one compound was identified as the MCH-cleaving catalyst. On incubation with the catalyst, the N-terminal Asp residue of MCH was converted to the pyruvate residue by oxidative decarboxylation. Detailed kinetics analysis revealed the catalytic nature of the action of the catalyst. In addition, the kinetics data indicated that MCH can be cleaved with half-lives of 3 h or less with submicromolar catalyst concentrations if the structure of the catalyst is further improved.

Amino Acid Sequence↗
PubMed2005

Preorganization in highly enantioselective diaza-Cope rearrangement reaction.

Crystal structure and activation entropy data indicate that H-bond directed diaza-Cope rearrangement of chiral diimines takes place with a high degree of preorganization. CD spectroscopy and HPLC data show that there is inversion of stereochemistry for the reaction with excellent enantioselectivity.

Journal Article↗
PubMed2005

Structural and dynamical basis of broad substrate specificity, catalytic mechanism, and inhibition of cytochrome P450 3A4.

Cytochrome P450 (CYP) 3A4 is responsible for the oxidative degradation of more than 50% of clinically used drugs. By means of molecular dynamics simulations with the newly developed force field parameters for the heme-thiolate group and its dioxygen adduct, we examine the differences in structural and dynamic properties between CYP3A4 in the resting form and its complexes with the substrate progesterone and the inhibitor metyrapone. The results indicate that the broad substrate specificity of CYP3A4 stems from the malleability of a loop (residues 211-218) that resides in the vicinity of the channel connecting the active site and bulk solvent. However, the high-amplitude motion of the flexible loop is found to be damped out upon binding of the inhibitor or the substrate in the active site. In the resting form of CYP3A4, a structural water molecule is bound to the sixth coordination position of the heme iron, stabilizing the octahedral coordination geometry. In addition to the direct coordination of metyrapone to the heme iron, the hydrogen bond interaction between the inhibitor carbonyl group and the side chain of Ser119 also contributes significantly to stabilizing the CYP3A4-metyrapone complex. On the other hand, progesterone is stabilized in the active site by the formation of two hydrogen bonds with Ser119 and Arg106, as well as by the van der Waals interactions with the heme and hydrophobic residues. The structural and dynamic features of the CYP3A4-progesterone complex indicate that the oxidative degradation of progesterone occurs through hydroxylation at the C16 position by the reactive oxygen coordinated to the heme iron.

Cytochrome P-450 CYP3A↗
PubMed2005

Artificial metalloprotease with active site comprising aldehyde group and Cu(II)cyclen complex.

To design artificial proteases that cleave peptide backbones of a wide range of proteins at selected sites, artificial active sites comprising the Cu(II) complex of cyclen (Cu(II)Cyc) and aldehyde group were synthesized on a cross-linked polystyrene. The aldehyde group was employed as the binding site in view of its ability of reversible formation of imine bonds with epsilon-amino groups of Lys residues exposed on the surface of proteins and Cu(II)Cyc as the catalytic group for peptide hydrolysis. The two polymeric artificial metalloproteases synthesized in the present study cleaved all of the protein substrates examined (myoglobin, gamma-globulin, bovine serum albumin, human serum albumin, lysozyme, and ovalbumin), manifesting saturation kinetic behavior. At 50 degrees C and pH 9.0 or 9.5, K(m) was (1.3-22) x 10(-)(4) M, comparable to those of natural proteases, and k(cat) was (6.0-25) x 10(-)(4) s(-)(1), corresponding to half-lives of 4.6-19 min. Intermediacy of the imine complexes formed between the aldehyde group of the catalyst and the epsilon-amino groups of Lys residues of the substrates was confirmed by the trapping experiment with NaB(OAc)(3)H. MALDI-TOF MS of the proteolytic reaction mixtures revealed formation of various cleavage products. Structures of some of the cleavage products were determined by using carboxypeptidase A and trypsin. Among various cleavage sites thus identified, Gln(91)-Ser(92) and Ala(94)-Thr(95) were the major initial cleavage sites in the degradation of myoglobin by the two catalysts. The selective cleavage of Gln(91)-Ser(92) and Ala(94)-Thr(95) was attributed to general acid assistance in peptide cleavage by Tyr(146) located in proximity to the two peptide bonds. Broad substrate selectivity, high cleavage-site selectivity, and high proteolytic rate are achieved, therefore, by positioning the aldehyde group in proximity to Cu(II)Cyc attached to a cross-linked polystyrene.

Aldehydes↗
PubMed2005

Angiotensin-cleaving catalysts: conversion of N-terminal aspartate to pyruvate through oxidative decarboxylation catalyzed by Co(III)cyclen.

To provide a firm basis for the new paradigm of drug discovery based on peptide-cleaving catalysts, oligopeptide-cleaving catalysts were searched for by using human angiotensin I (Ang-I) and angiotensin II (Ang-II) as the substrates. Catalyst candidates containing the Co(III) complex of cyclen as the catalytic center were prepared by multicomponent condensation reactions. From two types of chemical libraries containing about 3,600 catalyst candidates, two compounds [SS-Co(III)X and S-Co(III)Y] were selected as the most active catalysts. On incubation with SS-Co(III)X and S-Co(III)Y, both Ang-I and Ang-II were cleaved by oxidative decarboxylation instead of peptide hydrolysis: the N-terminal Asp residues of Ang-I and Ang-II were converted to pyruvate residues. Catalysts for oxidative decarboxylation of the N-terminal Asp residue contained in an oligopeptide are unprecedented in both biological and chemical systems. Detailed kinetics analysis suggested that Ang-I and Ang-II can be cleaved with half-lives much less than 1 h if the structures of the chelating ligands of the catalysts are further improved. The results indicated that the concept of the peptide-cleaving catalysts can be expanded to include oligopeptides as the targets and nonhydrolytic reactions as the means for cleavage.

Angiotensin I↗
PubMed2005

Peptide-cleaving catalyst selective for peptide deformylase.

A peptide-cleaving catalyst selective for peptide deformylase (PDF) was obtained from a library containing about 15 000 catalyst candidates. The catalyst cleaved the polypeptide backbone of PDF at Gln(152)-Arg(153). Docking simulations suggested multiple modes of interactions in the complex formed between the catalyst and PDF.

Amides↗
PubMed2003

Degradation of myoglobin by polymeric artificial metalloproteases containing catalytic modules with various catalytic group densities: site selectivity in peptide bond cleavage.

Mononuclear, dinuclear, and tetranuclear artificial metalloproteases were prepared by attaching respective catalytic modules containing the Cu(II) complex of cyclen (Cu(II)Cyc) to a derivative of cross-linked polystyrene. The polymeric artificial metalloproteases effectively cleaved peptide bonds of myoglobin (Mb) by hydrolysis. The proteolytic activity increased considerably as the catalytic group density was raised: the ratio of k(cat)/K(m) was 1:13:100 for the mono-, di-, and tetranuclear catalysts. In the degradation of Mb by the dinuclear catalyst, two pairs of intermediate proteins accumulated. One of the two initial cleavage sites leading to the formation of the protein fragments is identified as Gln(91)-Ser(92) and the other is suggested as Ala(94)-Thr(95). On the basis of a molecular modeling study by using the X-ray crystallographic structure of Mb, the site-selectivity is attributed to anchorage of one Cu(II)Cyc unit of the catalytic module to a heme carboxylate of Mb. The high site selectivity for the initial cleavage of a protein substrate and mechanistic analysis of the catalytic action are unprecedented for polymeric artificial enzymes.

Animals↗
PubMed2003

Toward protein-cleaving catalytic drugs: artificial protease selective for myoglobin.

A protein-cleaving catalyst highly selective for a disease-related protein can be used as a catalytic drug. As the first protein-cleaving catalyst selective for a protein substrate, a catalyst for myoglobin (Mb) was designed by attaching the Cu(II) or Co(III) complex of cyclen to a binding site searched by a combinatorial method using peptide nucleic acid monomers as building units. Various linkers were inserted between the catalytic Co(III) center and the binding site of the Mb-cleaving catalyst. Kinetic data revealed catalytic turnover of the Mb cleavage by the Cu(II) or Co(III) complex. MALDI-TOF MS revealed cleavage of the polypeptide backbone of Mb at selected positions. N-Terminal sequencing of the cleavage products identified the cleavage site and provided evidence for the hydrolytic nature of the Mb cleavage. Various chelating ligands were tested as the ligand for the Co(III) center of the Mb-cleaving catalyst. Among the nine chelating ligands examined, only cyclen and its triaza-monooxo analogue manifested catalytic activity.

Binding Sites↗
PubMed2003

Synthetic artificial peptidases and nucleases using macromolecular catalytic systems.

Effective artificial enzymes have been designed by adopting macromolecular systems for catalyst-substrate complexes. Artificial active sites comprising two or more organic functional groups were built on macromolecular backbones, leading to several types of organic artificial proteases. The activity of metal centers for peptide or DNA hydrolysis was greatly enhanced by attachment to polystyrene, leading to artificial metallopeptidases with substrate selectivity as well as artificial metallonucleases with high catalytic activity for double stranded DNA. A small artificial protease selective for a macromolecular target protein was synthesized. Target-specific artificial proteases can be used as protein-cleaving catalytic drugs.

Catalysis↗
PubMed2002

Protein-cleaving catalyst selective for protein substrate.

A protein-cleaving catalyst specific for a disease-related protein can be used as a catalytic drug. As the first protein-cleaving catalyst selective for a protein substrate, a catalyst for myoglobin was designed by attaching Cu(II) or Co(III) complex of cyclen to a binding site searched by a combinatorial method using peptide nucleic acid monomers as building units. [reaction: see text]

Base Sequence↗
PubMed2002

Silica-based artificial protease exploiting aldehyde groups as catalytic elements.

An artificial protease synthesized by covering the surface of silica gel with aldehyde and indole groups effectively hydrolyzed albumin and gamma-globulin. It is proposed that the aldehyde group is involved in both complexation of the protein substrate and the catalytic cleavage of the peptide bonds of the complexed proteins.

Aldehydes↗
PubMed1998

Kinetics of Hydrolysis of Phenyl Acetates Catalyzed by the Zinc(II) Complex of 1,5,9-Triazacyclododecane. Evidence for Attack of Water or Hydroxide Ion at the Coordinated Ester.

Rates for hydrolysis of substituted phenyl acetates were measured in the presence of the Zn(II) complex of 1,5,9-triazacyclododecane. The kinetic data are incompatible with the mechanism in which the water and hydroxide ion coordinated to the metal center makes a nucleophilic attack at the ester linkage. Instead, the results support the mechanism in which the ester is first complexed to the metal center and then water or hydroxide ion makes a nucleophilic attack at the complexed ester. The kinetic data further indicate that the electrostatic interaction between the cationic metal center and the anionic hydroxide ion facilitates the attack of hydroxide ion at the complexed ester. In addition, the C-O bond of the ester is not cleaved significantly in the rate-determining transition state for attack by both water and hydroxide ion.

Journal Article↗