Biomedical subjects

Julian D C Jones

Publications and source records attributed to Julian D C Jones.

5 recordsLinked to original sources

PubMed2003

Compact effector optics for processing in limited physical access situations.

A major advantage of fiber-optic beam delivery in laser materials processing is the ability to guide the laser power to the location where it is needed, leaving the laser itself remote and protected from the process. This is of special importance if the processing is to be performed in a hazardous environment. Particular problems are faced by the nuclear industry where weld repair and surface treatment work are required inside radioactive installations. By use of fiber beam delivery, only part of the delivery system and effector optics become contaminated, but the expensive laser system does not. However, in many cases the region where repair is required is not only radioactive but has only limited physical access, e.g., inside tubes or into corners, which prevents use of standard effector optics. We present a new design to deal with such constraints of a 2-mm outer diameter employing a hollow waveguide and gas shielding. This design is optically characterized and its performance assessed in welding and surface treatment applications. The potential of this compact effector optics in limited physical access situations is clearly demonstrated.

Journal Article↗

PubMed2003

Fiber-optic delivery of high-peak-power Q-switched laser pulses for in-cylinder flow measurement.

A bundle of optical fibers was constructed to deliver Q-switched frequency-doubled Nd:YAG laser pulses for the purpose of particle image velocimetry. Data loss that is due to fiber speckle was reduced by ensuring that each fiber was different in length by more than the coherence length of the laser being delivered. Hence, their speckle patterns will overlap but not interfere, producing more even illumination that is shown to reduce data loss. A custom-made diffractive optical element and careful endface preparation help to reduce damage to the fibers by the required high peak powers. With this method, pulse energies in excess of 25 mJ were delivered for a series of experimental trials within the cylinder head of an optically accessed internal combustion engine. Results from these trials are presented along with a comparison of measurements generated by conventionally delivered beams.

Journal Article↗

PubMed2003

Optimum frequency selection in multifrequency interferometry.

We describe a novel technique for measurement of absolute order of interference in multifrequency interferometry. An optimization criterion is introduced that leads to frequency selection formulations that are optimized with respect to the minimum number of frequencies required for achieving the maximum target dynamic range. The method is generalized to N frequencies and gives a definition of measurement reliability. We demonstrate the technique by means of coherent fringe projection for nonintrusive, full-field profilometry. Experimental data for three frequencies are presented.

Journal Article↗

PubMed2002

Applications of optical sensing for laser cutting and drilling.

Any reliable automated production system must include process control and monitoring techniques. Two laser processing techniques potentially lending themselves to automation are percussion drilling and cutting. For drilling we investigate the performance of a modification of a nonintrusive optical focus control system we previously developed for laser welding, which exploits the chromatic aberrations of the processing optics to determine focal error. We further developed this focus control system for closed-loop control of laser cutting. We show that an extension of the technique can detect deterioration in cut quality, and we describe practical trials carried out on different materials using both oxygen and nitrogen assist gas. We base our techniques on monitoring the light generated by the process, captured nonintrusively by the effector optics and processed remotely from the workpiece. We describe the relationship between the temporal and the chromatic modulation of the detected light and process quality and show how the information can be used as the basis of a process control system.

Journal Article↗

PubMed2002

Closed-loop phase stepping in a calibrated fiber-optic fringe projector for shape measurement.

Active homodyne feedback control can be used to stabilize an interferometer against unwanted phase drifts introduced by, for example, temperature gradients. The technique is commonly used in fiber-optic sensors to maintain the fiber at its most sensitive (quadrature) position. We describe an extension of the technique to introduce stabilized, pi/2-rad phase steps in a full-field interferometer. The technique was implemented in a single-mode, fiber-optic interference fringe projector used for shape measurement and can be easily applied to other fiber- or bulk-optic interferometers, for example, speckle pattern and holographic interferometers. Fresnel reflections from the distal fiber ends undergo a double pass in the fibers and interfere at the fourth port of a directional coupler. The interference intensity (and hence phase) is maintained at quadrature by feedback control to a phase modulator in one of the fiber arms. Stepping between quadrature positions (separated by pi rad for light undergoing a double pass) introduces stabilized phase steps in the projected fringes (separated by pi/2 rad for a single pass). A root-mean-square phase stability of 0.61 mrad in a 50-Hz bandwidth and phase step accuracy of 1.17 mrad were measured.

Journal Article↗