Search PubMed⌕ Search

Biomedical subjects

Jonas C Peters

Publications and source records attributed to Jonas C Peters.

35 records · Page 2Linked to original sources
PubMed2004

Considering Fe(II/IV) redox processes as mechanistically relevant to the catalytic hydrogenation of olefins by [PhBP iPr 3]Fe-H x species.

Several coordinatively unsaturated pseudotetrahedral iron(II) precursors, [PhBP(iPr)(3)]Fe-R ([PhBP(iPr)(3)] = [PhB(CH(2)P(i)Pr(2))(3)](-); R = Me (2), R = CH(2)Ph (3), R = CH(2)CMe(3) (4)) have been prepared from [PhBP(iPr)(3)]FeCl (1) that serve as precatalysts for the room-temperature hydrogenation of unsaturated hydrocarbons (e.g., ethylene, styrene, 2-pentyne) under atmospheric H(2) pressure. The solid-state crystal structures of 2 and 3 are presented. To gain mechanistic insight into the nature of these hydrogenation reactions, a number of [PhBP(iPr)(3)]-supported iron hydrides were prepared and studied. Room-temperature hydrogenation of alkyls 2-4 in the presence of a trapping phosphine ligand affords the iron(IV) trihydride species [PhBP(iPr)(3)]Fe(H)(3)(PR(3)) (PR(3) = PMe(3) (5); PR(3) = PEt(3) (6); PR(3) = PMePh(2) (7)). These spectroscopically well-defined trihydrides undergo hydrogen loss to varying degrees in solution, and for the case of 7, this process leads to the structurally identified Fe(II) hydride product [PhBP(iPr)(3)]Fe(H)(PMePh(2)) (9). Attempts to prepare 9 by addition of LiEt(3)BH to 1 instead lead to the Fe(I) reduction product [PhBP(iPr)(3)]Fe(PMePh(2)) (10). The independent preparations of the Fe(II) monohydride complex [PhBP(iPr)(3)]Fe(II)(H)(PMe(3)) (11) and the Fe(I) phosphine adduct [PhBP(iPr)(3)]Fe(PMe(3)) (8) are described. The solid-state crystal structures of trihydride 5, monohydride 11, and 8 are compared and demonstrate relatively little structural reorganization with respect to the P(3)Fe-P' core motif as a function of the iron center's formal oxidation state. Although paramagnetic 11 (S = 1) is quantitatively converted to the diamagnetic trihydride 5 under H(2), the Fe(I) complex 8 (S = (3)/(2)) is inert toward atmospheric H(2). Complex 10 is likewise inert toward H(2). Trihydrides 5 and 6 also serve as hydrogenation precatalysts, albeit at slower rates than that for the benzyl complex 3 because of a rate-contributing phosphine dependence. That these hydrogenations appear to proceed via well-defined olefin insertion steps into an Fe-H linkage is indicated by the reaction between trihydride 5 and ethylene, which cleanly produces the ethyl complex [PhBP(iPr)(3)]Fe(CH(2)CH(3)) (13) and an equivalent of ethane. Mechanistic issues concerning the overall reaction are described.

Journal Article↗
PubMed2004

The coordination chemistry of "[BP3]NiX" platforms: targeting low-valent nickel sources as promising candidates to L3Ni=E and L3Ni(triple bond)E linkages.

A series of divalent, monovalent, and zerovalent nickel complexes supported by the electron-releasing, monoanionic tris(phosphino)borate ligands [PhBP3] and [PhBPiPr3] ([PhBP3] = [PhB(CH2PPh2)3]-, [PhBPiPr3] = [PhB(CH2PiPr2)3]-) have been synthesized to explore fundamental aspects of their coordination chemistry. The pseudotetrahedral, divalent halide complexes [PhBP3]NiCl (1), [PhBP3]NiI (2), and [PhBPiPr3]NiCl (3) were prepared by the metalation of [PhBP3]Tl or [PhBPiPr3]Tl with (Ph3P)2NiCl2, NiI2, and (DME)NiCl2 (DME = 1,2-dimethoxyethane), respectively. Complex 1 is a versatile precursor to a series of complexes accessible via substitution reactions including [PhBP3]Ni(N3) (4), [PhBP3]Ni(OSiPh3) (5), [PhBP3]Ni(O-p-tBu-Ph) (6), and [PhBP3]Ni(S-p-tBu-Ph) (7). Complexes 2-5 and 7 have been characterized by X-ray diffraction (XRD) and are pseudotetrahedral monomers in the solid state. Complex 1 reacts readily with oxygen to form the four-electron-oxidation product, [[PhB(CH2POPh2)2(CH2PPh2)]NiCl] (8A or 8B), which features a solid-state structure that is dependent on its method of crystallization. Chemical reduction of 1 using Na/Hg or other potential 1-electron reductants generates a product that arises from partial ligand degradation, [PhBP3]Ni(eta2-CH2PPh2) (9). The more sterically hindered chloride 3 reacts with Li(dbabh) (Hdbabh = 2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene) to provide the three-coordinate complex [kappa2-PhBPiPr3]Ni(dbabh) (11), also characterized by XRD. Chemical reduction of complex 1 in the presence of L-type donors produces the tetrahedral Ni(I) complexes [PhBP3]Ni(PPh3) (12) and [PhBP3]Ni(CNtBu) (13). Reduction of 3 following the addition of PMe3 or tert-butyl isocyanide affords the Ni(I) complexes [PhBPiPr3]Ni(PMe3) (14) and [PhBPiPr3]Ni(CNtBu) (15), respectively. The reactivity of these [PhBP3]NiIL and [PhBPiPr3]NiIL complexes with respect to oxidative group transfer reactions from organic azides and diazoalkanes is discussed. The zerovalent nitrosyl complex [PhBP3]Ni(NO) (16) is prepared by the reaction of 1 with excess NO or by treating 12 with stoichiometric NO. The anionic Ni(0) complexes [[kappa2-PhBP3]Ni(CO)2][nBu4N] (17) and [[kappa2-PhBPiPr3]Ni(CO)2][ASN] (18) (ASN = 5-azoniaspiro[4.4]nonane) have been prepared by reacting [PhBP3]Tl or [PhBPiPr3]Tl with (Ph3P)2Ni(CO)2 in the presence of R4NBr. The photolysis of 17 appears to generate a new species consistent with a zerovalent monocarbonyl complex which we tentatively assign as [[PhBP3]Ni(CO)][nBu4N], although complete characterization of this complex has been difficult. Finally, theoretical DFT calculations are presented for the hypothetical low spin complexes [PhBP3]Ni(NtBu), [PhBPiPr3]Ni(NtBu), [PhBPiPr3]Ni(NMe), and [PhBPiPr3]Ni(N) to consider what role electronic structure factors might play with respect to the relative stability of these species.

Journal Article↗
PubMed2004

A tetrahedrally coordinated L3Fe-Nx platform that accommodates terminal nitride (Fe(IV)N) and dinitrogen (Fe(I)-N2-Fe(I)) ligands.

A tetrahedrally coordinated L3Fe-Nx platform that accommodates both terminal nitride (L3FeIVN) and dinitrogen (L3FeI-N2-FeIL3) functionalities is described. The diamagnetic L3FeIVN species featured has been characterized in solution under ambient conditions by multinuclear NMR (1H, 31P, and 15N) and infrared spectroscopy. The electronic structure of the title complex has also been explored using DFT. The terminal nitride complex oxidatively couples to generate the previously reported L3FeI-N2-FeIL3 species. This reaction constitutes a six-electron transformation mediated by two iron centers. Reductive protonation of the nitride complex releases NH3 as a significant reaction product.

Journal Article↗
PubMed2004

Hydrogenolysis of [PhBP3]Fe[triple bond]N-p-tolyl: probing the reactivity of an iron imide with H2.

This paper describes the reductive hydrogenolysis of a low-spin (S = 1/2) iron(III) imide. Pseudotetrahedral [PhBP3]FeIIIN-p-tolyl is reduced by hydrogen at ambient temperature and pressure in benzene solution. The reduction appears to proceed in a stepwise fashion. An intermediate S = 2 iron(II) anilide, [PhBP3]Fe(N(H)-p-tolyl), is observed and has been independently generated and structurally characterized. Prolonged hydrogenolysis in benzene results in the complete hydrogenolysis of the Fe-N linkage to release H2N-p-tolyl. The major iron-containing product formed from this step is the diamagnetic cyclohexadienyl complex, [PhBP3]Fe(eta5-cyclohexadienyl), which has also been independently prepared and structurally characterized. Evidence is presented to suggest that the final [PhBP3]Fe(eta5-cyclohexadienyl) product is formed via benzene insertion into a reactive [PhBP3]FeII-H intermediate.

Journal Article↗
PubMed2004

Amido-bridged Cu2N2 diamond cores that minimize structural reorganization and facilitate reversible redox behavior between a Cu1Cu1 and a class III delocalized Cu1.5Cu1.5 species.

A novel Cu(2)N(2) diamond core structure supported by an [SNS](-) ligand (1) ([SNS](-) = bis(2-tert-butylsulfanylphenyl)amido) has been prepared. This dicopper system exhibits a fully reversible one-electron redox process between a reduced Cu(1)Cu(1) complex, [[SNS][Cu]](2) (2), and a class III delocalized Cu(1.5)Cu(1.5) state, [[[SNS][Cu]](2)][B(3,5-(CF(3))(2)C(6)H(3))(4)] (3). Structural snapshots of both redox forms have been obtained to reveal remarkably little overall structural reorganization. The Cu...Cu bond distance nonetheless undergoes an appreciable compression (approximately 0.13 A) upon oxidation, providing a Cu...Cu distance of 2.4724(4) A in the mixed-valence state that is virtually identical to the Cu...Cu distance observed in the reduced form of the Cu(A) site of thiolate-bridged cytochrome c oxidase. Despite the low structural reorganization evident between 2 and 3, the [SNS](-) ligand is quite flexible. For example, square-planar geometries can prevail for divalent copper ions supported by [SNS](-) as evident from the crystal structure of [SNS]CuCl (4). Physical characterization for the mixed valence complex 3 includes electrochemical, magnetic (SQUID), EPR, and optical data. The complex has also been examined by density functional methods. An attempt was made to measure the rate of electron self-exchange k(s) between the Cu(1)Cu(1) and the Cu(1.5)Cu(1.5) complexes 2 and 3 by NMR line-broadening analysis in dichloromethane solution. While the system is certainly in the fast-exchange regime, the exchange process is too fast to be accurately measured by this technique. The value for k(s) can be bracketed with a conservative lower boundary of > or =10(7) M(-1) s(-1), a value that appears to be larger than other low molecular weight copper model complexes for which similar data is available. The unusually large magnitude of k(s) likely reflects the minimal structural reorganization that accompanies Cu(1)Cu(1) <--> Cu(1.5)Cu(1.5) interchange.

Journal Article↗
PubMed2004

Coordinating anions: (phosphino)tetraphenylborate ligands as new reagents for synthesis.

Anionic, electron-releasing phosphines that incorporate a borate counteranion within the ligand framework are promising reagents for organometallic catalysis. This report describes the synthesis of a new class of monodentate tertiary phosphines built upon the commonly employed tetraphenylborate anion. These new phosphines are highly stable and strongly electron-releasing and readily coordinate transition metals. Moreover, they are promising reagents for catalysis, as demonstrated by their ability to promote the Suzuki cross-coupling of aryl chloride substrates.

Journal Article↗
PubMed2003

Solution and solid-state spin-crossover behavior in a pseudotetrahedral d7 ion.

This Communication describes a pseudotetrahedral d7 complex, [PhBP3]Co(OSiPh3), that exhibits thermally induced spin-crossover both in solution and in the solid state. Magnetic crossover behavior is achieved by confluence of the X-type ligand and the tripodal auxiliary employed. Four-coordinate platforms of the present geometry type may offer a new approach to magnetic spin-crossover behavior distinct from their electronically related pseudooctahedral counterparts.

Journal Article↗
PubMed2003

Dinitrogen chemistry from trigonally coordinated iron and cobalt platforms.

This report establishes that trigonally coordinated "[PhBPiPr3]M" platforms (M = Fe, Co) will support both pi-acidic (N2) and pi-basic (NR) ligands at a fourth binding site. The N2 complexes of iron that are described are the first thoroughly characterized examples to exhibit a 4-coordinate geometry. Methylation of monomeric {Fe0(N2)-} and {Co0(N2)-} species successfully derivatizes the beta-N atom of the coordinated N2 ligand and affords the diazenido products {FeII(N2Me)} and {CoII(N2Me)}, respectively. One-electron oxidation of the mononuclear M0(N2)- species produces dinuclear and synthetically versatile MI(N2)MI complexes. These latter species provide clean access to the chemistry of the "[PhBPiPr3]MI" subunit. For example, addition of RN3 to MI(N2)MI results in oxidative nitrene transfer to generate [PhBPiPr3]MNR with concomitant N2 release.

Journal Article↗
PubMed2003

Bis(phosphino)borates: a new family of monoanionic chelating phosphine ligands.

The reaction of dimethyldiaryltin reagents Me(2)SnR(2) (R = Ph (1), p-MePh (2), m,m-Me(2)Ph (3), p-(t)BuPh (4), p-MeOPh (5), p-CF(3)Ph (6)) with BCl(3) provided a high-yielding, simple preparative route to the corresponding diarylchloroboranes R(2)BCl (R = Ph (10), p-MePh (11), m,m-Me(2)Ph (12), p-(t)BuPh (13), p-MeOPh (14), p-CF(3)Ph (15)). In some cases, the desired diarylchloroborane was not formed from an appropriate tin reagent Me(2)SnR(2) (R = o-MeOPh (7), o,o-(MeO)(2)Ph (8), o-CF(3)Ph (9)). The reaction of lithiated methyldiaryl- or methyldialkylphosphines with diarylchloroboranes or dialkylchloroboranes is discussed. Specifically, several new monoanionic bis(phosphino)borates are detailed: [Ph(2)B(CH(2)PPh(2))(2)] (25); [(p-MePh)(2)B(CH(2)PPh(2))(2)] (26); [(p-(t)BuPh)(2)B(CH(2)PPh(2))(2)] (27); [(p-MeOPh)(2)B(CH(2)PPh(2))(2)] (28); [(p-CF(3)Ph)(2)B(CH(2)PPh(2))(2)] (29); [Cy(2)B(CH(2)PPh(2))(2)] (30); [Ph(2)B(CH(2)P[p-(t)BuPh](2))(2)] (31); [(p-MeOPh)(2)B(CH(2)P[p-(t)BuPh](2))(2)] (32); [Ph(2)B(CH(2)P[p-CF(3)Ph](2))(2)] (33); [Ph(2)B(CH(2)P(BH(3))(Me)(2))(2)] (34); [Ph(2)B(CH(2)P(S)(Me)(2))(2)] (35); [Ph(2)B(CH(2)P(i)Pr(2))(2)] (36); [Ph(2)B(CH(2)P(t)Bu(2))(2)] (37); [(m,m-Me(2)Ph)(2)B(CH(2)P(t)Bu(2))(2)] (38). The chelation of diarylphosphine derivatives 25-33 and 36 to platinum was examined by generation of a series of platinum dimethyl complexes. The electronic effects of substituted bis(phosphino)borates on the carbonyl stretching frequency of neutral platinum alkyl carbonyl complexes were studied by infrared spectroscopy. Substituents remote from the metal center (i.e. on boron) have minimal effect on the electronic nature of the metal center, whereas substitution close to the metal center (on phosphorus) has a greater effect on the electronic nature of the metal center.

Journal Article↗
PubMed2003

The strong-field tripodal phosphine donor, [PhB(CH2PiPr2)3]-, provides access to electronically and coordinatively unsaturated transition metal complexes.

This paper introduces a sterically encumbered, strong-field tris(diisopropylphosphino)borate ligand, [PhBP(iPr)(3)] ([PhBP(iPr)(3)] = [PhB(CH(2)P(i)Pr(2))(3)](-)), to probe aspects of its conformational and electronic characteristics within a host of complexes. To this end, the Tl(I) complex, [PhBP(iPr)(3)]Tl (1), was synthesized and characterized in the solid-state by X-ray diffraction analysis. This precursor proves to be an effective transmetallating agent, as evidenced by its reaction with the divalent halides FeCl(2) and CoX(2) (X = Cl, I) to produce the monomeric, 4-coordinate, high-spin derivatives [PhBP(iPr)(3)]FeCl (2) and [PhBP(iPr)(3)]CoX (X = Cl (3), I (4)) in good yield. Complexes 2-4 were each characterized by X-ray diffraction analysis and shown to be monomeric in the solid-state. For conformational and electronic comparison within a system exhibiting higher than 4-coordination, the 16-electron ruthenium complexes [[PhBP(iPr)(3)]Ru(mu-Cl)](2) (5) and [[PhBP(3)]Ru(mu-Cl)](2) (6) were prepared and characterized ([PhBP(3)] = [PhB(CH(2)PPh(2))(3)](-)). The chloride complexes 2 and 3 reacted with excess CO to afford the divalent, monocarbonyl adducts [PhBP(iPr)(3)]FeCl(CO) (7) and [PhBP(iPr)(3)]CoCl(CO) (8), respectively. Reaction of 4 with excess CO resulted in the monovalent, dicarbonyl product [PhBP(iPr)(3)]Co(I)(CO)(2) (9). Complexes 5 and 6 also bound CO readily, providing the octahedral, 18-electron complexes [PhBP(iPr)(3)]RuCl(CO)(2) (10) and [PhBP(3)]RuCl(CO)(2) (11), respectively. Dimers 5 and 6 were broken up by reaction with trimethylphosphine to produce the mono-PMe(3) adducts [PhBP(iPr)(3)]RuCl(PMe(3)) (12) and [PhBP(3)]RuCl(PMe(3)) (13). Stoichiometric oxidation of 3 with dioxygen provided the 4-electron oxidation product [PhB(CH(2)P(O)(i)Pr(2))(2)(CH(2)P(i)Pr(2))]CoCl (14), while exposure of 3 to excess oxygen results in the 6-electron oxidation product [PhB(CH(2)P(O)(i)Pr(2))(3)]CoCl (15). Complexes 2 and 4 were characterized via cyclic voltammetry to compare their redox behavior to their [PhBP(3)] analogues. Complex 4 was also studied by SQUID magnetization and EPR spectroscopy to confirm its high-spin assignment, providing an interesting contrast to its previously described low-spin relative, [PhBP(3)]CoI. The difference in spin states observed for these two systems reflects the conformational rigidity of the [PhBP(iPr)(3)] ligand by comparison to [PhBP(3)], leaving the former less able to accommodate a JT-distorted electronic ground state.

Journal Article↗
PubMed2003

Zwitterionic and cationic bis(phosphine) platinum(II) complexes: structural, electronic, and mechanistic comparisons relevant to ligand exchange and benzene C-H activation processes.

Structurally similar but charge-differentiated platinum complexes have been prepared using the bidentate phosphine ligands [Ph(2)B(CH(2)PPh(2))(2)], ([Ph(2)BP(2)], [1]), Ph(2)Si(CH(2)PPh(2))(2), (Ph(2)SiP(2), 2), and H(2)C(CH(2)PPh(2))(2), (dppp, 3). The relative electronic impact of each ligand with respect to a coordinated metal center's electron-richness has been examined using comparative molybdenum and platinum model carbonyl and alkyl complexes. Complexes supported by anionic [1] are shown to be more electron-rich than those supported by 2 and 3. A study of the temperature and THF dependence of the rate of THF self-exchange between neutral, formally zwitterionic [Ph(2)BP(2)]Pt(Me)(THF) (13) and its cationic relative [(Ph(2)SiP(2))Pt(Me)(THF)][B(C(6)F(5))(4)] (14) demonstrates that different exchange mechanisms are operative for the two systems. Whereas cationic 14 displays THF-dependent, associative THF exchange in benzene, the mechanism of THF exchange for neutral 13 appears to be a THF independent, ligand-assisted process involving an anchimeric, eta(3)-binding mode of the [Ph(2)BP(2)] ligand. The methyl solvento species 13, 14, and [(dppp)Pt(Me)(THF)][B(C(6)F(5))(4)] (15), each undergo a C-H bond activation reaction with benzene that generates their corresponding phenyl solvento complexes [Ph(2)BP(2)]Pt(Ph)(THF) (16), [(Ph(2)SiP(2))Pt(Ph)(THF)][B(C(6)F(5))(4)] (17), and [(dppp)Pt(Ph)(THF)][B(C(6)F(5))(4)] (18). Examination of the kinetics of each C-H bond activation process shows that neutral 13 reacts faster than both of the cations 14 and 15. The magnitude of the primary kinetic isotope effect measured for the neutral versus the cationic systems also differs markedly (k(C(6)H(6))/k(C(6)D(6)): 13 = 1.26; 14 = 6.52; 15 approximately 6). THF inhibits the rate of the thermolysis reaction in all three cases. Extended thermolysis of 17 and 18 results in an aryl coupling process that produces the dicationic, biphenyl-bridged platinum dimers [[(Ph(2)SiP(2))Pt](2)(mu-eta(3):eta(3)-biphenyl)][B(C(6)F(5))(4)](2) (19) and [[(dppp)Pt](2)(mu-eta(3):eta(3)-biphenyl)][B(C(6)F(5))(4)](2) (20). Extended thermolysis of neutral [Ph(2)BP(2)]Pt(Ph)(THF) (16) results primarily in a disproportionation into the complex molecular salt [[Ph(2)BP(2)]PtPh(2)](-)[[Ph(2)BP(2)]Pt(THF)(2)](+). The bulky phosphine adducts [Ph(2)BP(2)]Pt(Me)[P(C(6)F(5))(3)] (25) and [(Ph(2)SiP(2))Pt(Me)[P(C(6)F(5))(3)]][B(C(6)F(5))(4)] (29) also undergo thermolysis in benzene to produce their respective phenyl complexes, but at a much slower rate than for 13-15. Inspection of the methane byproducts from thermolysis of 13, 14, 15, 25, and 29 in benzene-d(6) shows only CH(4) and CH(3)D. Whereas CH(3)D is the dominant byproduct for 14, 15, 25, and 29, CH(4) is the dominant byproduct for 13. Solution NMR data obtained for 13, its (13)C-labeled derivative [Ph(2)BP(2)]Pt((13)CH(3))(THF) (13-(13)()CH(3)()), and its deuterium-labeled derivative [Ph(2)B(CH(2)P(C(6)D(5))(2))(2)]Pt(Me)(THF) (13-d(20)()), establish that reversible [Ph(2)BP(2)]-metalation processes are operative in benzene solution. Comparison of the rate of first-order decay of 13 versus the decay of d(20)-labeled 13-d(20)() in benzene-d(6) affords k(13)()/k(13-d20)() approximately 3. The NMR data obtained for 13, 13-(13)()CH(3)(), and 13-d(20)() suggest that ligand metalation processes involve both the diphenylborate and the arylphosphine positions of the [Ph(2)BP(2)] auxiliary. The former type leads to a moderately stable and spectroscopically detectable platinum(IV) intermediate. All of these data provide a mechanistic outline of the benzene solution chemistries for the zwitterionic and the cationic systems that highlights their key similarities and differences.

Journal Article↗
PubMed2003

A low-spin d5 iron imide: nitrene capture by low-coordinate iron(I) provides the 4-coordinate Fe(III) complex [PhB(CH2PPh2)3]Fe=N-p-tolyl.

Entry into "[PhBP3]Fe" chemistry affords a rare, pseudotetrahedral iron(I) complex, [PhBP3]Fe(PPh3), with an S = 3/2 ground state. This precursor undergoes rapid oxidation by aryl azide to produce the d5 imide [PhBP3]FeNAr (Ar = p-tolyl). The Fe(III) imide is significant in that it is low-spin and represents the first mononuclear imide of iron. Doublet [PhBP3]FeNAr reacts rapidly and quantitatively with CO at room temperature to release isocyanate and [PhBP3]Fe(CO)2. The [PhBP3]Fe(CO)2 byproduct is also a precursor to [PhBP3]FeNAr upon addition of aryl azide.

Biomimetic Materials↗
PubMed2002

Elucidation of a low spin cobalt(II) system in a distorted tetrahedral geometry.

We have prepared a series of divalent cobalt(II) complexes supported by the [PhBP(3)] ligand ([PhBP(3)] = [PhB(CH(2)PPh(2))(3)](-)) to probe certain structural and electronic phenomena that arise from this strong field, anionic tris(phosphine) donor ligand. The solid-state structure of the complex [PhBP(3)]CoI (1), accompanied by SQUID, EPR, and optical data, indicates that it is a pseudotetrahedral cobalt(II) species with a doublet ground state-the first of its type. To our knowledge, all previous examples of 4-coordinate cobalt(II) complexes with doublet ground states have adopted square planar structure types. Complex 1 provided a useful precursor to the corresponding bromide and chloride complexes, ([PhBP(3)]Co(mu-Br))(2), (2), and ([PhBP(3)]Co(mu-Cl))(2), (3). These complexes were similarly characterized and shown to be dimeric in the solid-state. In solution, however, the monomeric low spin form of 2 and 3 dominates at 25 degrees C. There is spectroscopic evidence for a temperature-dependent monomer/dimer equilibrium in solution for complex 3. Furthermore, the dimers 2 and 3 did not display appreciable antiferromagnetic coupling that is typical of halide and oxo-bridged copper(II) and cobalt(II) dimers. Rather, the EPR and SQUID data for solid samples of 2 and 3 suggest that they have triplet ground states. Complexes 1, 2, and 3 are extremely oxygen sensitive. Thus, stoichiometric oxidation of 1 by dioxygen produced the 4-coordinate, high spin complex [PhB(CH(2)P(O)Ph(2))(2)(CH(2)PPh(2))]CoI, (4), in which the [PhBP(3)] ligand had undergone a 4-electron oxidation. Reaction of 1 with TlOAr (Ar = 2,6-Me(2)Ph) afforded an example of a 4-coordinate, high spin complex, [PhBP(3)]Co(O-2,6-Me(2)Ph) (5), with an intact [PhBP(3)] ligand. The latter two complexes were spectroscopically and structurally characterized for comparison to complexes 1, 2, and 3. Our data for these complexes collectively suggest that the [PhBP(3)] ligand provides an unusually strong ligand-field to these divalent cobalt complexes that is chemically distinct from typical tris(phosphine) donor ligand sets, and distinct from tridentate borato ligands that have been previously studied. Coupling this strong ligand-field with a pronounced axial distortion away from tetrahedral symmetry, a geometric consequence that is enforced by the [PhBP(3)] ligand, provides access to monomeric [PhBP(3)]CoX complexes with doublet rather than quartet ground states.

Journal Article↗
PubMed2002

Oxidative group transfer to Co(I) affords a terminal Co(III) imido complex.

The synthesis of the first terminal imido complex of cobalt, [PhBP3]CoN-p-tolyl, is reported. Its synthesis proceeds by oxidative group transfer from cobalt(I) upon addition of tolyl azide at room temperature. This species and a related eta1-diazoalkane adduct have been structurally characterized. The diamagnetic imido complex [PhBP3]CoN-p-tolyl reacts with CO to liberate isocyanate and the cobalt(I) dicarbonyl complex [PhBP3]Co(CO)2.

Journal Article↗
PubMed2002

Catalytic copolymerization of CO and ethylene with a charge neutral palladium(II) zwitterion.

The synthesis of a zwitterionic Pd(II) complex supported by an anionic bis(phosphino)borate ligand, Ph(2)B(CH(2)PPh(2))(2) (abbreviated as [Ph(2)BP(2)]), is reported. The new complex, [Ph(2)BP(2)]PdMe(THF), is active for CO and ethylene copolymerization. The copolymerization activity and polyketone molecular weight for the neutral, zwitterionic system are compared with those for the cationic systems [R(2)E(CH(2)PPh(2))(2)PdMe(THF)][B(C(6)F(5))(4)] where ER(2) = SiPh(2) and CH(2). Surprisingly, the more electron rich zwitterionic system is a catalyst of activity comparable to that of the more conventional cationic systems.

Journal Article↗