Search PubMed⌕ Search

Biomedical subjects

John T Sheridan

Publications and source records attributed to John T Sheridan.

12 recordsLinked to original sources
PubMed2006

Generalized Yamaguchi correlation factor for coherent quadratic phase speckle metrology systems with an aperture.

In speckle-based metrology systems, a finite range of possible motion or deformation can be measured. When coherent imaging systems with a single limiting aperture are used in speckle metrology, the observed decorrelation effects that ultimately define this range are described by the well-known Yamaguchi correlation factor. We extend this result to all coherent quadratic phase paraxial optical systems with a single aperture and provide experimental results to support our theoretical conclusions.

Journal Article↗
PubMed2006

Speckle photography: mixed domain fractional Fourier motion detection.

A reflection-based optical implementation of two simultaneous scale-invariant fractional Fourier transforms (FRTs) is used to develop a novel compact speckle photographic system. The system allows the independent determination of both surface tilting and in-plane translational motion from two sequential mixed domain images captured using a single camera.

Journal Article↗
PubMed2006

Paraxial speckle-based metrology systems with an aperture.

Digital speckle photography can be used in the analysis of surface motion in combination with an optical linear canonical transform (LCT). Previously [D. P. Kelly et al. Appl. Opt.44, 2720 (2005)] it has been shown that optical fractional Fourier transforms (OFRTs) can be used to vary the range and sensitivity of speckle-based metrology systems, allowing the measurement of both the magnitude and direction of tilting (rotation) and translation motion simultaneously, provided that the motion is captured in two separate OFRT domains. This requires two bulk optical systems. We extend the OFRT analysis to more general LCT systems with a single limiting aperture. The effect of a limiting aperture in LCT systems is examined in more detail by deriving a generalized Yamaguchi correlation factor. We demonstrate the benefits of using an LCT approach to metrology design. Using this technique, we show that by varying the curvature of the illuminating field, we can effectively change the output domain. From a practical perspective this means that estimation of the motion of a target can be achieved by using one bulk optical system and different illuminating conditions. Experimental results are provided to support our theoretical analysis.

Journal Article↗
PubMed2005

Recording beam modulation during grating formation.

Holography has been of increasing interest in recent years, with developments in many areas such as data storage and metrology. Photopolymer materials provide potentially good materials for holographic recording, as they are inexpensive and self-processing. Many experiments have been reported in the literature that describe the diffraction efficiency and angular selectivity of such materials. The majority of these reports discuss the performance of the holographic optical element after the recording stage. It has been observed, however, that sometimes, during exposure, the transmitted recording beam intensities vary with time. A simple phenomenological model is proposed to explain the beam modulation, which incorporates the growth of the phase grating, time-varying absorption effects, the mechanical motion of the plate, the growth of a lossy absorption grating during the recording process, and the effects of nonideal beam ratios.

Journal Article↗
PubMed2005

Magnitude and direction of motion with speckle correlation and the optical fractional Fourier transform.

The optical fractional Fourier transform (OFRT) in combination with speckle photography has previously been used to measure the magnitude of surface tilting and translation. Previous OFRT techniques used to determine motion have not been able to discern the direction of the tilt and translation. A simple new approach involving use of correlation is presented to overcome this limitation. Controlled variation of the minimum resolution and dynamical range of measurement is demonstrated. It is then experimentally confirmed that if a rigid body's motion is captured by two OFRT systems of different orders, the direction and magnitude of both the tilting and the in-plane translation motion of the body can be independently determined without a priori knowledge. The experimental results confirm the validity of previous theoretical predictions.

Journal Article↗
PubMed2005

Nonlocal polymerization-driven diffusion-model-based examination of the scaling law for holographic data storage.

For the first time to our knowledge, a detailed theoretical basis is provided for the well-known inverse-square scaling law of holographic diffraction, which states that replay diffraction efficiency eta = gamma/M2, where M is the number of gratings stored and gamma is a constant system parameter. This law is shown to hold for photopolymer recording media governed by the predictions of the nonlocal polymerization-driven diffusion model. On the basis of the analysis, we (i) propose a media inverse scaling law, (ii) relate gamma to photopolymer material parameters and the hologram geometry and replay conditions, and (iii) comment on the form and validity of the diffraction efficiency inverse-square scaling law for higher-diffraction-efficiency gratings.

Journal Article↗
PubMed2005

Generalizing, optimizing, and inventing numerical algorithms for the fractional Fourier, Fresnel, and linear canonical transforms.

By use of matrix-based techniques it is shown how the space-bandwidth product (SBP) of a signal, as indicated by the location of the signal energy in the Wigner distribution function, can be tracked through any quadratic-phase optical system whose operation is described by the linear canonical transform. Then, applying the regular uniform sampling criteria imposed by the SBP and linking the criteria explicitly to a decomposition of the optical matrix of the system, it is shown how numerical algorithms (employing interpolation and decimation), which exhibit both invertibility and additivity, can be implemented. Algorithms appearing in the literature for a variety of transforms (Fresnel, fractional Fourier) are shown to be special cases of our general approach. The method is shown to allow the existing algorithms to be optimized and is also shown to permit the invention of many new algorithms.

Journal Article↗
PubMed2005

Fast numerical algorithm for the linear canonical transform.

The linear canonical transform (LCT) describes the effect of any quadratic phase system (QPS) on an input optical wave field. Special cases of the LCT include the fractional Fourier transform (FRT), the Fourier transform (FT), and the Fresnel transform (FST) describing free-space propagation. Currently there are numerous efficient algorithms used (for purposes of numerical simulation in the area of optical signal processing) to calculate the discrete FT, FRT, and FST. All of these algorithms are based on the use of the fast Fourier transform (FFT). In this paper we develop theory for the discrete linear canonical transform (DLCT), which is to the LCT what the discrete Fourier transform (DFT) is to the FT. We then derive the fast linear canonical transform (FLCT), an N log N algorithm for its numerical implementation by an approach similar to that used in deriving the FFT from the DFT. Our algorithm is significantly different from the FFT, is based purely on the properties of the LCT, and can be used for FFT, FRT, and FST calculations and, in the most general case, for the rapid calculation of the effect of any QPS.

Journal Article↗
PubMed2004

Wavelength-controlled variable-order optical fractional Fourier transform.

The relationship between optical fractional Fourier transforms (OFRTs) obtained at different wavelengths is derived by use of the ABCD matrix formalism. It is shown that varying the wavelength while retaining the same optical system can be used to control the order of the OFRT. The advantage of this method of varying OFRT order is that no variation in the characteristics of the bulk optics is required. A general experimental verification of the theory is provided by showing the exact equivalence of two OFRT systems of different order when they are replayed using the same input function at different wavelengths.

Journal Article↗
PubMed2003

Motion detection, the Wigner distribution function, and the optical fractional Fourier transform.

It is shown that both surface tilting and translational motion can be independently estimated by use of the speckle photographic technique by capturing consecutive images in two different fractional Fourier domains. A geometric interpretation, based on use of the Wigner distribution function, is presented to describe this application of the optical fractional Fourier transform when little prior information is known about the motion.

Journal Article↗
PubMed2002

Comparison of holographic photopolymer materials by use of analytic nonlocal diffusion models.

The one-dimensional diffusion equation governing holographic grating formation in photopolymers, which includes both nonlocal material response and generalized dependence of the rate of polymerization on the illuminating intensity, has been previously solved under the two-harmonic expansion assumption. The resulting analytic expressions for the monomer and polymer concentrations have been derived and their ranges of validity tested in comparison with the more accurate numerical four-harmonic case. We used these analytic expressions to carry out a study of experimental results presented in the literature over a 30-year period. Automatic fitting of the data with these formulas allows material parameters, including the nonlocal chain-length variance sigma, to be estimated. In this way, (i) a quantitative comparison of different materials can be made, and (ii) a standard form of experimental result presentation is proposed to facilitate such a procedure.

Journal Article↗