Search PubMed⌕ Search

Biomedical subjects

John D Joannopoulos

Publications and source records attributed to John D Joannopoulos.

13 recordsLinked to original sources
PubMed2006

Large-scale optical-field measurements with geometric fibre constructs.

Optical fields are measured using sequential arrangements of optical components such as lenses, filters, and beam splitters in conjunction with planar arrays of point detectors placed on a common axis. All such systems are constrained in terms of size, weight, durability and field of view. Here a new, geometric approach to optical-field measurements is presented that lifts some of the aforementioned limitations and, moreover, enables access to optical information on unprecedented length and volume scales. Tough polymeric photodetecting fibres drawn from a preform are woven into light-weight, low-optical-density, two- and three-dimensional constructs that measure the amplitude and phase of an electromagnetic field on very large areas. First, a three-dimensional spherical construct is used to measure the direction of illumination over 4pi steradians. Second, an intensity distribution is measured by a planar array using a tomographic algorithm. Finally, both the amplitude and phase of an optical wave front are acquired with a dual-plane construct. Hence, the problem of optical-field measurement is transformed from one involving the choice and placement of lenses and detector arrays to that of designing geometrical constructions of polymeric, light-sensitive fibres.

Journal Article↗
PubMed2006

Achieving centimetre-scale supercollimation in a large-area two-dimensional photonic crystal.

Diffraction, a fundamental process in wave physics, leads to spreading of the optical beams as they propagate. However, new photonic crystal (PhC) meta-materials can be nano-engineered to generate extreme anisotropy, resulting in apparent propagation of light without diffraction. This surprising phenomenon, called supercollimation, effectively freezes the spatial width of a light beam inside a PhC, observed over a few isotropic diffraction-lengths. However, using such experiments to predict the behaviour for longer propagation lengths is difficult, as a tiny error in a measured width can extrapolate to order unity uncertainty in the width at distances over hundreds of diffraction-lengths. Here, supercollimation is demonstrated in a macroscopic PhC system over centimetre-scale distances, retaining spatial width confinement without the need for waveguides or nonlinearities. Through quantitative studies of the beam evolution in a two-dimensional PhC, we find that supercollimation possesses unexpected but inherent robustness with respect to short-scale disorder such as fabrication roughness, enabling supercollimation over 600 isotropic diffraction-lengths. The effects of disorder are identified through experiments and understood through rigorous simulations. In addition, a supercollimation steering capability is proposed.

Journal Article↗
PubMed2005

Evanescent-wave bonding between optical waveguides.

Forces arising from overlap between the guided waves of parallel, microphotonic waveguides are calculated. Both attractive and repulsive forces, determined by the choice of relative input phase, are found. Using realistic parameters for a silicon-on-insulator material system, we estimate that the forces are large enough to cause observable displacements. Our results illustrate the potential for a broader class of optically tunable microphotonic devices and microstructured artificial materials.

Journal Article↗
PubMed2005

Dynamic all-optical tuning of transverse resonant cavity modes in photonic bandgap fibers.

Photonic bandgap fibers for transverse illumination containing half-wavelength microcavities have recently been designed and fabricated. We report on the fabrication and characterization of an all-optical tunable microcavity fiber. The fiber is made by incorporating a photorefractive material inside a Fabry-Perot cavity structure with a quality factor Q >200 operating at 1.5 microm. Under short-wavelength transverse external illumination, a 2 nm reversible shift of the cavity resonant mode is achieved. Dynamic all-optical tuning is reported at frequencies up to 400 Hz. Experimental results are compared with simulations based on the amplitude and kinetics of the transient photodarkening effect measured in situ in thin films.

Journal Article↗
PubMed2005

Superheating and induced melting at semiconductor interfaces.

We present ab initio density-functional simulations of the state of several semiconductor surfaces at temperatures near the bulk melting temperatures. We find that the solid-liquid phase-transition temperature at the surface can be altered via a microscopic (single-monolayer) coating with a different lattice-matched semiconducting material. Our results show that a single-monolayer GaAs coating on a Ge(110) surface above the Ge melting temperature can dramatically reduce the diffusion coefficient of the germanium atoms, going so far as to prevent melting of the bulk layers on the 10 ps time scale. In contrast, a single-monolayer coating of Ge on a GaAs(110) surface introduces defects into the bulk and induces melting of the top layer of GaAs atoms 300 K below the GaAs melting point. To our knowledge, these calculations represent the first ab initio investigation of the superheating and induced melting phenomena.

Journal Article↗
PubMed2005

Complete modal decomposition for optical waveguides.

Virtually all electromagnetic waveguiding structures support a multiplicity of modes. Nevertheless, to date, an experimental method for unique decomposition of the fields in terms of the component eigenmodes has not been realized. The fundamental problem is that all current attempts of modal decomposition do not yield phase information. Here we introduce a noninterferometric approach to achieve modal decomposition of the fields at the output of a general waveguiding structure. The technique utilizes a mapping of the two-dimensional field distribution onto the one-dimensional space of waveguide eigenmodes, together with a phase-retrieval algorithm to extract the amplitudes and phases of all the guided vectorial modes. Experimental validation is provided by using this approach to examine the interactions of 16 modes in a hollow-core photonic-band gap fiber.

Journal Article↗
PubMed2004

Metal-insulator-semiconductor optoelectronic fibres.

The combination of conductors, semiconductors and insulators with well-defined geometries and at prescribed length scales, while forming intimate interfaces, is essential in most functional electronic and optoelectronic devices. These are typically produced using a variety of elaborate wafer-based processes, which allow for small features, but are restricted to planar geometries and limited coverage area. In contrast, the technique of fibre drawing from a preformed reel or tube is simpler and yields extended lengths of highly uniform fibres with well-controlled geometries and good optical transport characteristics. So far, this technique has been restricted to particular materials and larger features. Here we report on the design, fabrication and characterization of fibres made of conducting, semiconducting and insulating materials in intimate contact and in a variety of geometries. We demonstrate that this approach can be used to construct a tunable fibre photodetector comprising an amorphous semiconductor core contacted by metallic microwires, and surrounded by a cylindrical-shell resonant optical cavity. Such a fibre is sensitive to illumination along its entire length (tens of meters), thus forming a photodetecting element of dimensionality one. We also construct a grid of such fibres that can identify the location of an illumination point. The advantage of this type of photodetector array is that it needs a number of elements of only order N, in contrast to the conventional order N2 for detector arrays made of photodetecting elements of dimensionality zero.

Journal Article↗
PubMed2003

Reversed Doppler effect in photonic crystals.

Nonrelativistic reversed Doppler shifts have never been observed in nature and have only been speculated to occur in pathological systems with simultaneously negative effective permittivity and permeability. This Letter presents a different, new physical phenomenon that leads to a nonrelativistic reversed Doppler shift in light. It arises when light is reflected from a moving shock wave propagating through a photonic crystal. In addition to reflection of a single frequency, multiple discrete reflected frequencies or a 10 GHz periodic modulation can also be observed when a single carrier frequency of wavelength 1 microm is incident.

Journal Article↗
PubMed2003

Color of shock waves in photonic crystals.

Unexpected and stunning new physical phenomena result when light interacts with a shock wave or shocklike dielectric modulation propagating through a photonic crystal. These new phenomena include the capture of light at the shock wave front and reemission at a tunable pulse rate and carrier frequency across the band gap, and bandwidth narrowing as opposed to the ubiquitous bandwidth broadening. To our knowledge, these effects do not occur in any other physical system and are all realizable under experimentally accessible conditions. Furthermore, their generality make them amenable to observation in a variety of time-dependent photonic crystal systems, which has significant technological implications.

Journal Article↗
PubMed2003

Field expulsion and reconfiguration in polaritonic photonic crystals.

We uncover a rich set of optical phenomena stemming from the incorporation of polar materials exhibiting transverse phonon polariton excitations into a photonic crystal structure. We identify in the frequency spectrum two regimes in which the dielectric response of the polaritonic medium can induce extreme localization of the electromagnetic energy. Our analysis of the effect of polarization and the interaction between the polariton and photonic band gaps on the Bloch states leads to a pair of mechanisms for sensitive frequency-controlled relocation and/or reconfiguration of the fields.

Journal Article↗
PubMed2002

Wavelength-scalable hollow optical fibres with large photonic bandgaps for CO2 laser transmission.

Conventional solid-core optical fibres require highly transparent materials. Such materials have been difficult to identify owing to the fundamental limitations associated with the propagation of light through solids, such as absorption, scattering and nonlinear effects. Hollow optical fibres offer the potential to minimize the dependence of light transmission on fibre material transparency. Here we report on the design and drawing of a hollow optical fibre lined with an interior omnidirectional dielectric mirror. Confinement of light in the hollow core is provided by the large photonic bandgaps established by the multiple alternating submicrometre-thick layers of a high-refractive-index glass and a low-refractive-index polymer. The fundamental and high-order transmission windows are determined by the layer dimensions and can be scaled from 0.75 to 10.6 micro m in wavelength. Tens of metres of hollow photonic bandgap fibres for transmission of carbon dioxide laser light at 10.6 micro m wavelength were drawn. The transmission losses are found to be less than 1.0 dB m(-1), orders of magnitude lower than those of the intrinsic fibre material, thus demonstrating that low attenuation can be achieved through structural design rather than high-transparency material selection.

Journal Article↗
PubMed2002

External reflection from omnidirectional dielectric mirror fibers.

We report the design and fabrication of a multilayered macroscopic fiber preform and the subsequent drawing and optical characterization of extended lengths of omnidirectional dielectric mirror fibers with submicrometer layer thickness. A pair of glassy materials with substantially different indices of refraction, but with similar thermomechanical properties, was used to construct 21 layers of alternating refractive index surrounding a tough polymer core. Large directional photonic band gaps and high reflection efficiencies comparable to those of the best metallic reflectors were obtained. Potential applications of these fibers include woven fabrics for radiation barriers, spectral authentication of cloth, and filters for telecommunications.

Journal Article↗