Biomedical subjects

John C Rosecrance

Publications and source records attributed to John C Rosecrance.

6 recordsLinked to original sources

PubMed2007

Effect of aviation snip design and task height on upper extremity muscular activity and wrist posture.

Hand tools described as ergonomic in design are intended to reduce exposure to physical risk factors associated with work-related musculoskeletal disorders. Additionally, using the right tool for the job is believed to reduce exposure and, consequently, risk of disease. Sheet metal workers frequently use a cutting tool called aviation snips when fabricating and installing ductwork. The purpose of this laboratory simulation study was to determine the effect of (1) aviation snip design; and (2) work height on muscle activity, wrist posture, and user satisfaction among sheet metal workers. We hypothesized that specific aviation snips designs would be most appropriate for use at specific heights. Twenty-three sheet metal workers used three different designs of aviation snips to make curved cuts in sheet metal placed both at waist height and shoulder height. Conventional circular snips, straight snips, and an alternate design of offset snips were used. Upper extremity muscle activity was measured with surface electromyography, wrist posture was measured with electrogoniometry, and user satisfaction was rated by the participants on a survey. Statistically significant effects of snip design and task height on muscle activity, wrist posture, and user satisfaction were observed. However, no snip was preferable for all dependent variables. Work height had a greater effect on muscle activity and wrist posture than snip design. Field studies are indicated to determine the long-term effect of snip design on physical risk factors and risk of musculoskeletal disorders.

Adult↗

PubMed2006

Workers' compensation experience of Colorado agriculture workers, 2000-2004.

BACKGROUND: Agriculture is among the most hazardous of occupations. The lack of information regarding agriculture injuries or fatalities has been recognized as an obstacle for effective injury prevention. Workers' compensation claims data for non-fatal injuries among agriculture and agri-business workers in the State of Colorado between the years of 2000 and 2004. METHODS: Workers' compensation claims are utilized to estimate injury claim incidence rates, determine the distributions of sources, causes, types and body locations of injuries, and estimate the costs of these injuries. RESULTS: Colorado agriculture and agri-business workers (e.g., cattle dealers, cattle or livestock raisers, dairy farmers) have high rates of injury claims, especially in sectors that involve interaction with animals or livestock. Grain milling operations had a high rate of injury claims among agri-business operations. Injuries related to animals, strains, machinery, and falls or slips were the most frequent among all occupations analyzed. CONCLUSIONS: Understanding the occurrence of injuries among Colorado agriculture and agri-business workers is critical to implementing and evaluating effective intervention programs for specific agriculture-related occupations. The development of safety interventions that address the worker-animal interface, fall protection systems, machinery usage, and overexertion prevention strategies is recommended.

Accidents, Occupational↗

PubMed2003

Symptoms of musculoskeletal disorders among apprentice construction workers.

Musculoskeletal disorders (MSDs) are a major cause of work-related disability and lost-time illnesses for many occupational groups. This study determined the prevalence of musculoskeletal symptoms among young construction workers. A symptom and job factors survey was self-administered to 996 construction apprentices. Prevalence was determined by the percent of positive responses to musculoskeletal symptom questions. Odds ratios and 95 percent confidence intervals were the measures of association between prevalent musculoskeletal symptoms and demographic, leisure, and job factors and were determined by logistic regression. The low back was the site most commonly reported for job-related musculoskeletal symptoms (54.4%), which was also the most common reason for seeking care from a physician (16.8%) and missing work (7.3%). Number of years worked in the construction trade was significantly associated with knee (p-trend = 0.0009) and wrist/hand (p-trend < 0.04) MSD symptoms and was suggestive of an association with low back pain (p-trend = 0.05). "Working in the same position for long periods" was the job factor identified as most problematic, with 49.7 percent of all construction apprentices rating it as a moderate/major problem contributing to musculoskeletal symptoms. Musculoskeletal symptoms are a significant problem among young construction workers at the beginning of their careers. Prevention strategies are needed early in the apprentice training program to reduce the potential disability associated with work-related musculoskeletal symptom disorders.

Adult↗

PubMed2003

Method for quantitatively assessing physical risk factors during variable noncyclic work.

OBJECTIVES: Assessing exposure to physical risk factors during variable noncyclic work can be problematic. The purpose of this study was to modify an existing data reduction method for directly quantifying physical exposures during variable noncyclic work. METHODS: Myoelectric activity of the finger flexors of two groups of workers, heavy equipment operators (N=25) and mechanics (N=25), was sampled to determine the intensity and duration of forceful exertions during normal tasks. Data were reduced with a modification of the exposure variation analysis (EVA), called clustered EVA (CEVA), using three intensity and two duration categories. A two-way, mixed-effects, repeated-measures analysis of variance evaluated the percentage of sampled work time in each CEVA category. RESULTS: CEVA was able to quantify variable noncyclic work, and it contrasted the work of the two groups, with simple effects significantly different for all the exposure categories. The mechanics performed high-intensity short-duration contractions 9.1% of the time, whereas the operators had similar contractions only 1.8% of the time. Conversely, the operators used low-intensity contractions of prolonged duration over 81% of the time, compared with only 43% for the mechanics. CONCLUSIONS: CEVA is a useful modification of EVA for contrasting the noncyclic work typical of understudied industries like construction. A simplification of electromyography with summary measures such as CEVA provides a comprehensible, yet accurate measure of forceful exertions during worktasks.

Adult↗

PubMed2002

Carpal tunnel syndrome among apprentice construction workers.

BACKGROUND: In terms of lost-work time and restricted workdays, surgery, and rehabilitation, one of the most costly occupational musculoskeletal disorders is carpal tunnel syndrome (CTS). The purpose of this study was to determine the prevalence of CTS among apprentice construction workers. METHODS: This cross-sectional study included apprentices from four construction trades. Apprentices completed a self-administered questionnaire and received electrophysiologic studies assessing median nerve function across the carpal tunnel. A surveillance case definition for CTS was based on characteristic hand symptoms and the presence of median mononeuropathy across the carpal tunnel. RESULTS: Of the 1,325 eligible apprentices, 1,142 (86.2%) participated in the study. The prevalence of CTS among apprentices was 8.2%; sheet metal workers had the highest rate (9.2%). In operating engineers, the prevalence of CTS was significantly higher (OR = 6.9; 95% CI = 2.6-18.2) among the heavy equipment mechanics than the drivers of those vehicles. Body mass index, age, and self-reports of working overhead were associated with prevalent CTS. Less than 15% of the apprentices with CTS sought medical attention for their disorder. CONCLUSIONS: Many construction workers begin developing CTS before or during their apprenticeship. Few apprentices seek medical attention for hand symptoms characteristic of CTS. The results of this study indicate a public health need for the implementation of prevention strategies for CTS in the construction industry.

Adult↗

PubMed2002

Test-retest reliability of a self-administered musculoskeletal symptoms and job factors questionnaire used in ergonomics research.

The purpose of this study was to investigate the test-retest reliability of questionnaire items related to musculoskeletal symptoms and the reliability of specific job factors. The type of questionnaire items described in the present study have been used by several investigators to assess symptoms of musculoskeletal disorders and problematic job factors among workers from a variety of occupations. Employees at a plastics molding facility were asked to complete an initial symptom and jobs factors questionnaire and then complete an identical questionnaire either two or four weeks later. Of the 216 employees participating in the initial round, 99 (45.8%) agreed to participate in the retest portion of the study. The kappa coefficient was used to determine repeatability for categorical outcomes. The majority of the kappa coefficients for the 58 questionnaire items were above 0.50 but ranged between 0.13 and 1.00. The section of the questionnaire having the highest kappa coefficients was the section related to hand symptoms. Interval lengths of two and four weeks between the initial test and retest were found to be equally sufficient in terms of reliability. The results indicated that the symptom and job factors questionnaire is reliable for use in epidemiologic studies. Like all measurement instruments, the reliability of musculoskeletal questionnaires must be established before drawing conclusions from studies that employ the instrument.

Adult↗